挠性飞行器姿态机动脉冲调宽控制系统设计

大挠性充液飞行器喷气姿态控制系统设计是一个复杂和关键的问题,为了抑制挠性振动,设计形状输入信号,选取双曲正切作为平滑函数,并和Bang-Bang控制对比研究.喷气脉冲调制采用工程上易于实现的脉冲调宽（PWM）设计方法,结合积分死区原理设计脉冲宽度,对具有挠性充液动力学特性的对象进行控制,抑制了振动模态和晃动模态,实现了平滑机动控制.通过数学仿真表明,形状输入法和合理的脉冲调宽逻辑可以有效抑制大挠性飞行器姿态机动控制过程中的挠性振动.     

弹性飞行器时域稳定鲁棒性分析

 从时域内对存在模型误差的弹性飞行器控制系统进行了稳定鲁棒性研究。给出了稳定鲁棒性设计准则及稳定鲁棒性测度的概念,提出了弹性飞行器控制系统稳定鲁棒性最优综合及振动抑制的方法。     

挠性航天器动态输出反馈控制中的“溢出”管制方法

研究挠性空间飞行器控制系统鲁棒设计的动态输出反馈控制系统中的“溢出”管制问题,给出了抑制“溢出”的正交空间法和参数优化方法,而且通过在设计指标中引入对“溢出”的管制项,使控制系统最佳设计和“溢出”管制结合起来,达到了减少“溢出”,改善系统鲁棒性的目的。     

基于输入成形的挠性航天器自适应滑模控制

针对大型挠性航天器姿态机动过程中的振动抑制问题,提出一种输入成形(IS)与自适应滑模控制(ASMC)相结合的控制策略.该控制策略利用输入成形抑制标称挠性系统的残余振动,并通过滑模控制保证实际系统在参数不确定性和外部干扰的影响下实现对标称系统的跟踪,解决了输入成形对参数不确定性和外部干扰的敏感性问题.进一步采用自适应技术去除了滑模切换增益对参数不确定性和干扰上界的先验性要求.仿真结果表明,在参数不确定性和外界干扰的影响下,该控制方法能够保证在完成姿态机动的同时抑制航天器的挠性振动.     

基于模型跟踪的弹性飞行器鲁棒控制律设计

针对一种大弹性效应飞行器的控制问题进行研究,该类飞行器的首阶弹性振动频率极低,接近于短周期模态。高阶弹性飞行器的动力学特性与刚性飞行器存在本质的差别,无法利用传统控制方法达到要求的飞行品质,而且抗干扰性和鲁棒稳定性更差。将模型跟踪方法与H∞混合灵敏度方法结合,设计了考虑气动弹性影响的综合飞行控制律,并针对弹性飞行器的特点设置输入、输出权函数,对飞行品质、抗干扰性和鲁棒性等多个设计目标进行折衷。计算结果表明,该方法可以满足弹性飞行器控制多方面的设计要求。     

挠性航天器大角度机动的滑模变结构控制

考虑刚性主体上带有挠性梁的航天器，在建立挠性系统动力学模型的基础上，采用指数趋近率的滑模变结构控制策略进行大角度机动控制，并通过最优控制理论设计弹性稳态器抑制由于刚体运动而激发的弹性振动，数字仿真表明，提出的控制策略在实现旋转机动的同时，有效地抑制了弹性振动。     

挠性航天器的退步直接自适应姿态跟踪控制

针对参数不确定的挠性航天器姿态跟踪控制问题,提出了一种退步直接自适应控制算法。首先验证了挠性航天器动力学子系统的近似严格正实性,并设计了具有理想控制性能的参考模型;然后对以姿态四元数描述的运动学子系统设计常系数输出反馈中间控制律,使航天器姿态四元数输出渐近跟踪参考模型输出;最后退一步,对具有参数不确定特性的动力学子系统,基于非线性直接自适应控制理论和Lyapunov稳定性理论,设计了退步直接自适应姿态跟踪控制器,并证明了闭环系统的稳定性。仿真结果表明,所提控制方法能有效抑制挠性附件的振动,对挠性航天器的控制是有效的。     

在非定常气动力作用下弹性飞行器的动稳定性及主动控制

首先导出了在非定常气动力作用下的弹性飞行器纵向运动方程。而后就简化的非定常气动力数学模型提出了分析气动弹性对飞行器稳定性影响的方法。并从有效抑制飞行器的弹性振动角度研究主动反馈控制、操纵面及陀螺位置合适选择的最优综合设计问题。     

薄壁挠性高速转子动平衡技术原理及应用

挠性转子在高速旋转时产生强烈振动,而且一个转速下的平衡将造成上一个转速平衡状况的破坏。挠性转子动平衡不同于刚性转子,采用刚性力传递理论的平衡方法不能消除挠性轴的振动,也达不到平衡的目的。经过大量的理论研究和实际摸索,总结出了多种国际领先的工艺方法,进行薄壁挠性高速转子的动平衡,取得了很好的成效。     

卫星光通信APT控制系统H∞设计

 捕获瞄准跟踪(APT)控制系统的设计是影响整个星间光通信系统性能的重要因素。利用指向偏差的概率分布阐述了卫星光通信过程中捕获概率、跟踪误差及误码率受卫星平台振动和终端装置参数摄动的影响,通过功率谱分析了卫星平台振动在低频段、对象不确定性在高频段对指向偏差的影响,并对其进行了模型化分析。采用H_∞控制混合灵敏度设计方法同时抑制干扰和处理受控对象不确定性问题进行控制器设计。仿真验证表明该方法得到的控制器对平台干扰具有抑制力,对对象摄动具有鲁棒性。     

基于零点配置的分力合成主动振动抑制方法研究(英文)

The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.     

Fault-tolerant control and vibration suppression of flexible spacecraft: An interconnected system approach

This paper considers a fault-tolerant control and vibration suppression problem of flexible spacecraft. The attitude dynamics is modeled by an interconnected system, in which the rigid part and the flexible part are coupled with each other. Such a model allows us to use the interconnected system approach to analyze the flexible spacecraft. Both distributed and decentralized observer-based fault-tolerant control schemes are developed, under which the closed-loop stability of flexible spacecraft can be ensured by using the cycle-small-gain theorem. Compared with the traditional method, this paper considers the faults occurred not only in the rigid parts, but also in the flexible parts. In addition, the application of the interconnected system approach simplifies the system model of flexible spacecraft, thereby the difficulty of theoretical analysis and engineering practice of fault-tolerant control of flexible spacecraft are greatly reduced. Simulation results show the effectiveness of the proposed methods and the comparison of different fault-tolerant control approach.     

太阳帆航天器动力学建模与求解

 太阳帆航天器动力学建模与求解是姿态控制与结构振动抑制的基础,具有重要的理论与工程意义。针对带有控制杆和控制叶片的太阳帆航天器,进行结构的合理简化。应用矢量力学基本原理,推导出考虑弹性振动的太阳帆航天器姿态动力学方程,再对其进行简化,分别得到基于控制叶片和控制杆的两类太阳帆航天器的姿态动力学方程,联立太阳帆支撑杆振动方程,结合非约束模态的定义对运行于超地球同步转移轨道的太阳帆航天器动力学方程进行了求解及分析,结果表明所建立的太阳帆动力学模型可准确地描述柔性太阳帆航天器的动力学特性。     

Singular formalism and admissible control of spacecraft with rotating flexible solar array

This paper is concerned with the attitude control of a three-axis-stabilized spacecraft which consists of a central rigid body and a flexible sun-tracking solar array driven by a solar array drive assembly. Based on the linearization of the dynamics of the spacecraft and the modal identi- ties about the flexible and rigid coupling matrices, the spacecraft attitude dynamics is reduced to a formally singular system with periodically varying parameters, which is quite different from a space- craft with fixed appendages. In the framework of the singular control theory, the regularity and impulse-freeness of the singular system is analyzed and then admissible attitude controllers are designed by Lyapunov＇s method. To improve the robustness against system uncertainties, an H∞ optimal control is designed by optimizing the H∞ norm of the system transfer function matrix. Comparative numerical experiments are performed to verify the theoretical results.     

A composite control scheme for attitude maneuvering and elastic mode stabilization of flexible spacecraft with measurable output feedback

This paper treats the question of attitude maneuver control and elastic mode stabilization of a flexible spacecraft based on adaptive sliding mode theory and active vibration control technique using piezoelectric materials. More precisely, a modified positive position feedback (PPF) scheme is developed to design the PPF compensator gains in a more systematical way to stabilize the vibration modes in the inner loop, in which a cost function is introduced to be minimized by the feedback gains subject to the stability criterion at the same time. Based on adaptive sliding mode control theory, a discontinuous attitude control law is derived to achieve the desired position of the spacecraft, taking explicitly into account the mismatched perturbation and actuator constraints. In the attitude control law, an adaptive mechanism is also embedded such that the unknown upper bound of perturbation is automatically adapted. Once the controlled attitude control system reaches the switching hyperplane, the state variables can be driven into a small bounded region. An additional attractive feature of the attitude control method is that the structure of the controller is independent of the elastic mode dynamics of the spacecraft, since in practice the measurement of flexible modes is not easy or feasible. The proposed control strategy has been implemented on a flexible spacecraft. Both analytical and numerical results are presented to show the theoretical and practical merit of this approach.     

Sliding mode and shaped input vibration control of flexible systems

In this paper, the vibration reduction problem is investigated for a flexible spacecraft during attitude maneuvering. A new control strategy is proposed, which integrates both the command input shaping and the sliding mode output feedback control (SMOFC) techniques. Specifically, the input shaper is designed for the reference model and implemented outside of the feedback loop in order to achieve the exact elimination of the residual vibration by modifying the existing command. The feedback controller, on the other hand, is designed based on the SMOFC such that the closed-loop system behaves like the reference model with input shaper, where the residual vibrations are eliminated in the presence of parametric uncertainties and external disturbances. An attractive feature of this SMOFC algorithm is that the parametric uncertainties or external disturbances of the system do not need to satisfy the so-called matching conditions or invariance conditions provided that certain bounds are known. In addition, a smoothed hyperbolic tangent function is introduced to eliminate the chattering phenomenon. Compared with the conventional methods, the proposed scheme guarantees not only the stability of the closed-loop system, but also the good performance as well as the robustness. Simulation results for the spacecraft model show that the precise attitudes control and vibration suppression are successfully achieved.     

柔性航天器振动主动抑制及姿态控制

针对柔性航天器柔性附件振动主动抑制及姿态高精度快速稳定问题,研究了一种输入成形器（IS）-自适应有限时间干扰观测器（FDO）-有限时间积分滑模控制器综合的设计方法。首先,基于柔性模态的频率及阻尼信息,获得能够有效抑制柔性振动的输入成形器形式,并与系统参考输入进行卷积,得到期望参考输入;其次,基于航天器动力学模型,设计一种新型的自适应有限时间干扰观测器,避免了综合干扰上界必须已知的约束,且保证干扰估计误差有限时间收敛至零,实现对干扰及残余振动影响的快速精确估计;最后,基于观测器的估计值,设计多变量有限时间积分滑模控制器,保证对期望参考输入的高精度快速跟踪控制,并进行严格的稳定性证明。仿真结果表明,该综合设计策略能够保证柔性附件振动抑制75%,姿态稳定度达到10^-4数量级。     

Coordinated attitude control for flexible spacecraft formation with actuator configuration misalignment

This paper investigates the coordinated attitude control problem for flexible spacecraft formation with the consideration of actuator configuration misalignment. First, an integral-type sliding mode adaptive control law is designed to compensate the effects of flexible mode, environmental disturbance and actuator installation deviation. The basic idea of the Integral-type Sliding Mode Control (ISMC) is to design a proper sliding manifold so that the sliding mode starts from the initial time instant, and thus the robustness of the system can be guaranteed from the beginning of the process and the reaching phase is eliminated. Then, considering the nominal system of spacecraft formation based on directed topology, an attitude cooperative control strategy is developed for the nominal system with or without communication delay. The proposed control law can guarantee that for each spacecraft in the spacecraft formation, the desired attitude objective can be achieved and the attitude synchronization can be maintained with other spacecraft in the formation. Finally, simulation results are given to show the effectiveness of the proposed control algorithm.     

Variable structure control and active vibration suppression of flexible spacecraft during attitude maneuver

This paper presents a new approach to vibration reduction of flexible spacecraft during attitude maneuver by using the theory of variable structure control (VSC) to design switching logic for thruster firing and lead zirconate titanate (PZT) as sensor and actuator for active vibration suppression. The spacecraft to be investigated is a hub with a cantilever flexible beam appendage, which can undergo a single axis rotation. The proposed control system includes the attitude controller acting on the rigid hub, designed by variable structure control technique, and the surface-bonded PZT patches for active vibration suppression of flexible appendages, designed by the positive position feedback (PPF) control technique. To avoid chattering, pulse-width pulse-frequency (PWPF) modulation is adopted for the thruster control, which makes the thrusters to be operated in a close to linear manner and also can suppress the relatively large amplitude vibrations excited by, for example, rapid maneuver. However, some residual micro-vibrations still exist due to the switching actions. Upon that, the technique of active vibration control using PZT is turned on to provide further vibration suppression of the residual micro-vibrations and fine tuning of the system performance. By combining the advantages of both these control strategies, an improved performance for vibration control in both the macro-and micro-senses can result. Both analytical and numerical results are presented to show the theoretical and practical merit of this approach.