耐热粉末铝合金成形工艺研究

为研制超音速飞行器所需的耐热铝合金管材 ,采用喷射沉积管坯→挤压成厚壁管材→旋压成薄壁管的成形工艺路线 ,旋压出Al - 8.5Fe - 1.3V - 1.7Si耐热粉末铝合金Φ内 15 3mm× 1.2mm× 5 40mm的小直径管材和Φ内 380mm× 2 .5mm× 114 0mm的大直径管材。大直径管材做成的模拟舱段通过了静强与静热联合试验     

5B70合金大尺寸锻环成形工艺及组织性能

针对大尺寸5B70锻环性能提高需求，通过对5B70均匀化铸锭进行不同温度和应变速率下的热压缩模拟，获得应力应变数据并拟合了该合金的热加工图，以指导大尺寸锻环成形。从热加工图中得到该合金合适的热变形温度为400~450 ℃，变形速率为0.1/s左右最为合适。根据该加工图，采用相同条件的环锻工艺，制备了5B70铝镁钪合金试验件和尺寸为Ф2 900 mm×Ф2 600 mm×700 mm成品环件，并讨论了热变形工艺对成形件组织和性能的影响。结果表明，铝镁钪合金在该热变形条件下进行塑性变形，没有出现加工失稳等变形缺陷，可获得力学性能和塑性综合表现良好的铝镁钪合金成形件。     

多层喷射沉积制备大尺寸耐热铝合金管坯的研究

采用多层喷射沉积工艺制备出了尺寸为Ф630 mm×250 mm×800 mm且质量较好的FVS0812耐热铝合金管坯,通过挤压获得了性能优良的大直径管材,并对管坯和挤压后管材的力学性能和微观结构进行了检测和分析.分析结果表明,多层喷射沉积制坯过程中,熔滴在沉积面的冷却速度约3.2×104 K@s-1～106K@s-1,熔滴凝固后在沉积坯中形成微细晶粒结构(200 nm～500 nm)和弥散分布的纳米析出相Al12(Fe,V)3Si(20nm～60 nm),使得沉积坯挤压致密后具有优异的性能.     

具有高固结强度的钢纤维

美国研究出一种工艺方法,可以制得长度只有1/8英寸(3mm)的钢纤维。这些纤维很细,一磅就有250,000根以上。这些被称为超细纤维的公称尺寸为0.007英寸×0.015英寸×0.125英寸(0.2mm×0.4mm×3mm)。它是用含有不超过0.12％碳和0.6％锰的     

SiCp / Al 复合材料低损伤磨削制孔工艺研究

采用研制的椎4 mm 金刚石磨料刀具,研究SiCp / Al 复合材料磨削制孔过程中工艺参数对轴向力和

孔质量的影响规律。结果表明:刀具转速高于6 000 r/ min、进给速度为5 mm/ min 时,可以获得较好的制孔质量。

     

束丝SiC纤维增强铝复合材料界面TEM研究

利用透射电镜 (TEM )对由几种不同方法制备的束丝SiC纤维增强铝复合材料 (包括超声液相浸渗法制备的复合丝、由复合丝热压得到的板材以及由真空液相压渗法制备的板材等 )的界面微观特征进行了研究 ,结果显示 ,制造态及 5 5 0℃× 1h热暴露条件下复合材料没有发生界面反应 ,在 6 5 0℃× 1h热暴露条件下有厚度 10 0～2 0 0nm的界面反应区。该研究表明 ,SiC/Al复合材料在制备工艺条件下具有有良好的界面化学相容性     

B/Al复合材料的制造、性能及应用

综述了国内外B/Al复合材料的发展研究现状 ,具体介绍了几种制备技术的基本原理和工艺 ,包括热压扩散法、熔体浸渗法等。从工艺的角度分析了复合工艺参数———温度、时间、压力和环境对B/Al复合材料及对B纤维的影响。对B/Al复合材料的力学性能和在航空航天等方面的应用也做了较为系统的介绍 ,分析认为国内采用热压扩散法制备的B/Al复合材料性能稳定 ,其管材、型材已达到了应用阶段 ,为我国航空航天技术中应用此类复合材料奠定了基础     

工艺参数对铝合金摩擦挤压增材组织及性能的影响

采用6061-T651铝合金圆棒进行摩擦挤压增材制造(friction extrusion additive manufacturing,FEAM)工艺实验研究,探讨和分析不同主轴转速对单道双层增材试样的增材成形、组织特征和力学性能的影响规律。结果表明:对给定横向移动速度300 mm/min,采用主轴转速为600 r/min和800 r/min均能获得完全致密无任何内部缺陷、厚度分别为2 mm和4 mm的单道双层增材试样,增材整体由细小等轴晶粒组成,增材层间实现冶金连接;800 r/min下工具轴肩的摩擦挤压作用降低,增材层间结合界面呈平直状,塑化金属流动不充分,沉积层宽度较窄、表面成形更粗糙;600 r/min下结合界面经历的塑性变形和热循环更为显著,晶粒细化至6.0μm,但增材界面区软化程度较严重,硬度仅为增材棒料母材的52.7%~56.2%,而800 r/min下界面区的硬度能够达到母材的56.0%~61.3%;在600 r/min和800 r/min下,增材试样均具有优良的综合力学性能,抗拉强度分别达到增材棒料母材6061-T651的66%和70%,而断后伸长率明显较高,分别为母材的212%和169%;与目前其他增材工艺力学性能比较均具有明显的优势。     

叠层材料低频振动制孔工艺参数优化实验研究

CFRP/Ti叠层结构在一体化制孔的过程中易出现复合材料分层、撕裂、灼伤和孔出口毛刺等制孔缺陷。本文基于低频振动辅助钻削技术,进行工艺实验,经过二次优化后得到最优加工参数。实验结果表明,在转速400 r/min、进给量12 mm/min、振幅75 μm与转速500 r/min、进给量21 mm/min、振幅75 μm两组加工参数下的制孔质量较好,使用较高转速和较大进给量能够提高加工效率。     

化学气相沉积法制备铼管的研究

采用化学气相沉积方法研制成功我国第一只铼管(φ12.5mm×30mm),研究了铼管的组织结构和其他性能.金相及扫描电镜观察表明,化学气相沉积法制备的铼材基本无缺陷,密度接近理论值;维氏硬度测量值高于加工态工业铼片.化学气相沉积是一种制备铼管的可行且有效的方法.     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.