火箭发动机羽流红外特性计算方法研究

为研究火箭发动机羽流近场的红外辐射特性,建立了羽流红外辐射传输的计算模型,通过在能量方程中引入辐射源项,实现了流场计算与辐射传输的耦合求解。计算中考虑了7种主要燃气组分,分别使用有限体积法和离散坐标法求解羽流流场和辐射传输方程,得到了羽流红外辐射强度在1～15μm范围内随波长变化的曲线及辐射强度在近场内的分布云图,均与文献的计算结果和红外试验热图符合较好。在羽流近场内能够捕捉到流场内各点辐射强度随流场物性变化的情况,表明耦合求解能提高辐射计算精度。     

数值模拟喷焰2.7微米红外辐射特性

以固体火箭发动机尾喷焰的红外探测为主要应用背景,利用反向蒙特卡罗法和有限体积法计算了火箭尾喷焰红外辐射特性,获得了尾喷焰在探测波长为2.7μm下的红外辐射的空间、光谱分布特性,两种方法的计算结果也非常接近,具有重要的理论意义和实际应用背景。     

固液混合火箭发动机喷焰红外辐射特性分析

为了研究固液混合火箭发动机喷焰在不同飞行状态的红外辐射特性,建立了固液两相状态下喷焰的红外辐射计算模型,获得了喷焰在2~12μm波段的红外辐射.将喷焰的温度、压力、摩尔组分等作为输入条件,米氏散射(Mie)模型计算颗粒相的散射,采用有限体积法(FVM)离散辐射传递方程,利用中分辨率大气辐射传输(MODTRAN)模型计算不同观测距离的大气透过率,编程计算得到不同飞行高度,不同观测方向下喷焰的红外辐射.结果表明喷焰红外辐射亮度与温度分布类似,在2.7~3.0μm和4.2~4.5μm波段范围内的辐射较强,高温粒子在近红外比远红外对总辐射的贡献大,太空与地面观测不同飞行高度的发动机喷焰辐射率因大气衰减的不同而有所差异,可为目标跟踪与发动机设计提供参考.      

Effects of forward-flight speed on plume flow and infrared radiation of IRS-integrating helicopter

To address deeper understandings about the aero-thermal performance of an integrating infrared suppressor under more realistic situations, a numerical investigation is motivated in the current study, concerning the effects of forward-flight speed on exhaust plume flow and infrared radiation of the Infrared Suppressor-integrating(IRS-integrating) helicopter, wherein the forward-flight speed is changed from 0 m/s(hover state) to 100 m/s, while both the engine exhaust parameters and the main-rotor ...     

离散光谱分辨率对喷流红外特性FVM计算的影响

建立了辐射传递方程(RTE)的有限元体积法(FVM)计算模型,研究了离散光谱分辨率对FVM计算精度的影响,提出了离散光谱分辨率无关解的概念,并编制了相应的FORTRAN源程序,结合大气飞行发动机标准算例进行了一系列计算和比较.结果表明;在给定的红外光谱域中,随着离散光谱的分辨率的提高,计算出的方向光谱辐射强度渐渐趋向于同一个值.在航空发动机喷流2～5μm红外光谱区间中,当划分150个以上等间隔光谱微元后,FVM可以保证达到离散光谱分辨率无关解.      

姿控发动机羽流的可见光/近红外特性

为了研究发动机羽流辐射特性对光学探测成像的影响,基于不同直径粒子散射理论、辐射传递方程和分子吸收线数据库,应用有限体积法,建立了火箭发动机羽流在不同波段的辐射特性计算程序.针对实际工作情况进行建模,开展某姿控发动机工作在环月球轨道时的可见及近红外波段羽流的辐射特性计算.在0.4~0.9μm波长范围内,针对羽流气体组分、波长、观察天顶角以及太阳辐射对羽流光谱的影响作了数值计算及分析.研究结果表明:应用有限体积法开发的程序较好地模拟火箭发动机羽流的辐射特性,并具有广泛适用性;在可见光和近红外波段,太阳辐射作用对火箭发动机喷流辐射特性影响最大.      

涡扇发动机排气系统红外特征

采用反向蒙特卡罗法(Reverse Monte-carlo,简称RMC)结合窄带模型计算了模型涡扇发动机(不带加力)排气系统的红外辐射强度。考虑了金属壁面的发射和反射以及燃气中CO2,CO和H2O等组分的吸收、发射和透射,组分的吸收系数由NASA SP3080数据库获得,并对判断射线归宿的过程进行了改进,开发了计算程序。实验测量了模型涡扇发动机排气系统的中波红外光谱辐射强度及其空间辐射强度分布。结果表明:计算得到的3～5μm波段内的光谱辐射强度以及空间辐射强度分布与实验值吻合较好,最大误差为10%左右,本文的计算方法能比较准确地反映涡扇发动机排气系统在非加力状态下的中波红外辐射特征。     

Investigation of the infrared characteristics of the rocket nozzle

Investigation of the infrared characteristics of a rocket nozzle is very important for the study of infrared initiating technology. The Narrow-Band Zone model is developed for that purpose. The spectral transmission and absorption factors are introduced, and the equations between radiative heat flux and the temperature of waill surfaces and gas are developed. The radiative heat transfer in one axisymmetric cylindrical enclosure filled with homogeneous radiative participating medium is computed with the Narrow-Band Zone model and compared with those in the reference documents. The comparison shows good agreement. The radiative heat transfer to the nozzle of one rocket engine is also calculated with the Narrow-Band Zone model, and the outgoing radiative energy flux and energy rate integrated in a mid-wave infrared band 2-6 pm, a long-wave infrared band 8-14 pm and the full wave band are analyzed. The following conclusions can be derived: the spectral radiation from the inlet and outlet of the nozzle show apparent spectral discontinuity, which appears greater in the 2.7-2.95 pm than in the neighboring wave band. The spectral outgoing radiative energy flux of nozzle wail is similar to that of gray body, which decreases with wavelength in 2-14 pm. The outgoing radiative energy flux on the nozzle wall is greater in the cylindrical and contracting section of nozzle, but smaller in the divergent section, which is determined by temperature. The nozzle of the rocket engine radiates most energy in the mid-wave surfaces by absorption. The most important feature of gas radiation is the strong selection of the waveband, so the detailed study of the infrared characteristics of nozzle of the rocket engine should be carried out on narrow-band computation.     

矢量喷管内燃气辐射与壁面温度的耦合计算

选取内、外调节片和隔热屏建立几何模型,基于封闭腔净辐射模型和壁面热平衡模型建立了燃气辐射与喷管壁面温度的耦合算法.波段为1~5μm的气体辐射采用窄波带模型计算,其他波段不考虑气体辐射,建立辐射净热流密度-有效辐射亮度-壁面温度的关联式求解燃气与壁面的辐射换热,采用牛顿-拉斐尔森迭代法求解壁面热平衡方程计算其温度.对某轴对称矢量喷管(偏转20°),计算了喷管壁面的红外光谱辐射和辐射净热流密度,以及各部分结构的温度.作为验证,还计算了文献中某液体火箭发动机轴对称矢量喷管壁面的辐射净热流密度,与文献的结果进行对比一致性较好.研究表明:轴对称矢量喷管偏转段沿周向的辐射热流密度和温度差异很大,沿偏转方向部位壁面的温度和辐射热流密度都较低,偏转方向壁面的温度比相反方向大约低10%,辐射热流密度大约低50%.      

加遮挡板后二元喷管的红外辐射特性数值模拟

在宽高比为6.33的圆转矩形二元喷管喷口处安装不同结构的下遮挡板。通过计算流体力学/红外辐射(CFD/IR)综合数值模拟的方法,获得加遮挡结构后二元喷管的红外辐射场分布特征,并对不同遮挡结构的红外辐射抑制效果进行比较。结果表明:遮挡板结构改变了二元喷管原有的对称结构的辐射场分布。它对喷管的尾焰以及内外壁面产生的红外辐射在-90°~0°方向上有着较好的抑制作用。尾焰红外辐射强度最多降低51%,喷管内壁面红外辐射被完全遮挡。而双层遮挡结构可以削弱二元喷管-90°~0°方向43%的总体红外辐射,与此同时却增强了0°~90°方向40%的红外辐射。     

某型涡扇排气系统缩比模型红外辐射特性实验

针对某型涡扇排气系统构建1/5缩比模型,采用实验的方法验证了波瓣混合器能够降低涡扇发动机排气系统红外辐射.结果表明:相对于环形混合器,波瓣混合器使得排气系统出口尾焰温度降低11%左右,3～5μm波段红外辐射在各探测角度内降低7.3%～22.6%;涵道比从0.233增加到0.685,排气系统出口尾焰核心温度降低21%以上,红外辐射强度降低30%～59%;尾焰和排气系统内部壁面温度的降低使得排气系统红外辐射强度大幅度降低.      

火箭排气特征研究进展

概要论述火箭排气特征的内涵及研究排气特征的重要意义,着重介绍和评述在理论预估与实验测量两方面的研究进展情况,指山了今后的研究方向。     

火箭发动机出口参数对喷焰流动及辐射的影响

基于详细化学反应机理+逐线积分法+视在光线法开展了火箭发动机喷焰流动与辐射特性研究,分析了不同化学反应机理对流动与辐射的影响,利用地面试验数据校验了模型的正确性,并详细分析了火箭发动机出口参数变化对喷焰流动及辐射的影响规律。研究结果表明:喷管出口温度增加,对流场结构影响较小,但会显著提升喷焰的复燃效应;喷管出口压强增加,会对流场马赫波系结构产生影响,但对喷焰二次燃烧影响较小;喷焰红外辐射强度会随着出口温度或出口压强的升高而增加,且红外辐射强度与出口推力正相关。      

Numerical simulation of the infrared radiative signatures of liquid and solid rocket plumes

In this paper, a finite volume method was developed to compute the infrared radiative signatures of both liquid and solid rocket plumes, and to investigate the radiative signatures on two wavebands, 2–6 and 8–12 μm bands, respectively. This method is based on the radiative transport equation for local thermodynamic equilibrium, which accounts for radiative heat transfer in inhomogeneous emitting, absorbing, and non-isotropic scattering media. The radiative properties of combustion gases are computed by using the Elsasser narrow band model, and that of particles are computed by using the Mie scattering theory. A numerical method is applied to solve the following three problems. The first one is the computation of the radiative heat transfer in an absorbing, emitting and isotropic scattering homogeneous cylindrical medium in which the radiative flux is presented. The other two are the computations of the infrared radiation of plumes from the liquid and solid rockets in which both the source and apparent radiant intensities are presented as results. The atmospheric absorption effect on the radiation of plumes is also considered by calculating the atmospheric transmittance using MODTRAN. Some of these results, compared with those available in the literature, have shown satisfactory agreement in most cases.     

煤油-氧火焰中铁的辐射光谱实验研究

为了对羽流激波中金属光谱特性进行研究,用煤油-氧火焰气体模拟煤油-氧发动机的羽流,以二茂铁溶于煤油模拟发动机材料铁的磨损,给出不同混合比下铁在火焰中辐射光谱的实验与仿真结果.实验光谱数据随铁的浓度不同而变化,理论光谱与实验结果吻合较好,验证了羽流中金属原子辐射光谱的仿真程序.为基于羽流光谱分析的发动机故障诊断研究奠定了实验与理论基础.     

三组元双工况火箭发动机羽流发射光谱实验研究

为研究火箭发动机故障的羽流光谱诊断技术，对三级元双工况火箭发动机羽流发射光谱进行了实验测量。结果表明娄发动机有异常杂质进入羽流时，羽流光谱中有该物质的显著特征光谱；同时，正常情况下羽流辐射光谱随发动机不同结构、不同工况及不同工作参数而表现出不同的特征光谱。     

对流辐射板抑制涡扇发动机热喷流红外辐射的实验

用对流辐射换热板来降低混合排气涡扇发动机热喷流的红外辐射,并在涡扇发动机热喷流模拟实验台上进行了实验研究.测量了安装对流辐射换热板前后,轴对称喷管的热喷流的温度分布,轴对称喷管和二元喷管的热喷流在3～5 μm波段的红外辐射强度.结果表明:对流辐射换热板可以降低热喷流高温核心区的温度约10%,降低涡扇发动机热喷流的红外辐射强度约20%～30%.      

Interference-free wind tunnel testing of jet propelled missiles

Wind tunnel evaluation of the aerodynamic interaction effects between plume and the external flow past the missile body including the wake boundary (“slipstream”) over powered flight envelopes of rocket propelled vehicles can be greatly facilitated — or even made possible — by a methodology replacing the hot propellant by cold, inert gases. Model nozzle design is based on the second order matching of plume geometry and first order modeling of plume stiffness. Since modeled nozzles will have larger throat radii than the prototypes, one can use sting-supported, sting-fed model installations thus eliminating aerodynamic interference effects due to struts. The concepts of simulated altitude and simulated full-scale Reynolds Number greatly reduce wind tunnel occupancy time. Computer programs, covering all steps of evaluating prototype nozzle performance, model sting nozzle design, model test evaluation and interpretation have been developed. The modeling methodology is supported by experimental results obtained in an induction wind tunnel at the FFA, Bromma, Sweden and in the 16 T and VKF-A altitude tunnels at AEDC, Tullahoma, Tenn.     

IR radiation characteristics of rocket exhaust plumes under varying motor operating conditions

The infrared(IR) irradiance signature from rocket motor exhaust plumes is closely related to motor type,propellant composition,burn time,rocket geometry,chamber parameters and flight conditions.In this paper,an infrared signature analysis tool(IRSAT) was developed to understand the spectral characteristics of exhaust plumes in detail.Through a finite volume technique,flow field properties were obtained through the solution of axisymmetric Navier-Stokes equations with the Reynolds-averaged approach.A refined 13-species,30-reaction chemistry scheme was used for combustion effects and a k-e-Rtturbulence model for entrainment effects.Using flowfield properties as input data,the spectrum was integrated with a line of sight(LOS) method based on a single line group(SLG) model with Curtis-Godson approximation.The model correctly predicted spectral distribution in the wavelengths of 1.50–5.50 lm and had good agreement for its location with imaging spectrometer data.The IRSAT was then applied to discuss the effects of three operating conditions on IR signatures:(a) afterburning;(b) chamber pressure from ignition to cutoff;and(c) minor changes in the ratio of hydroxyl-terminated polybutadiene(HTPB) binder to ammonium perchlorate(AP) oxidizer in propellant.Results show that afterburning effects can increase the size and shape of radiance images with enhancement of radiation intensity up to 40%.Also,the total IR irradiance in different bands can be characterized by a non-dimensional chamber pressure trace in which the maximum discrepancy is less than 13% during ignition and engine cutoff.An increase of chamber pressure can lead to more distinct diamonds,whose distance intervals are extended,and the position of the first diamond moving backwards.In addition,an increase in HTPB/AP causes a significant jump in spectral intensity.The incremental rates of radiance intensity integrated in each band are linear with the increase of HTPB,and the growth rates of radiance intensities in some bands reach up to 50% as HTPB weight increases by 3%.     

球面收敛二元矢量喷管气动及红外特性研究:模拟地面状态

采用数值模拟方法对涡扇发动机排气系统球面收敛二元矢量喷管的气动和红外辐射特性进行了研究,研究仅针对地面状态和俯仰偏转.结果表明:俯仰偏转角在小于20°范围内,俯仰偏转对排气系统推力系数和总压恢复系数的影响微弱,气动推力矢量角与俯仰偏转角几乎相等;由于气体的容积性热辐射特征,喷管俯仰偏转角的变化引起高温喷流红外辐射的方向性变化明显,喷管俯仰偏转时的热喷流在3~5μm波段红外辐射呈现一定幅度的增加;排气系统在3~5μm波段的红外辐射峰值随俯仰偏转角的增加而趋于减小,其出现位置小于俯仰偏转角;在大的俯仰偏转角下,排气系统在垂直探测平面上方的红外辐射较无矢量偏转情形有所降低,但在探测面下方却有明显的增强,导致另一个峰值的出现.