基于有向图的航天器编队飞行自适应姿态协同控制

在有向通信拓扑下研究了编队航天器自适应姿态协同控制问题。针对航天器编队飞行系统中存在外部扰动和模型不确定性的情况,通过选取包含相对姿态误差和绝对姿态误差的辅助变量,提出了一种鲁棒自适应控制策略。提出了自适应律估计转动惯量矩阵和扰动上界等未知参数,并且利用Lyapunov稳定性理论分析了闭环系统的渐近稳定性。与滑模控制等传统鲁棒控制不同,所设计的鲁棒自适应控制器是连续的,更便于航天器编队飞行系统的实现。最后通过仿真验证了该控制策略能够实现高精度的编队飞行跟踪控制。     

一类不确定非线性系统的鲁棒自适应设计

讨论了一类含有广义不确定性的非线性系统的自适应跟踪问题。通过引入一种新颖的鲁棒函数,有效地抑制了系统不确定性对系统的影响,并利用反演设计技术设计了控制器,避免了系统控制矩阵未知时控制器可能出现的奇异问题,证明了系统的状态跟踪误差和参数误差指数收敛于原点的一个邻域。     

使用变速控制力矩陀螺的航天器鲁棒自适应姿态跟踪控制

 研究以变速控制力矩陀螺群（VSCMGs）为执行机构的航天器姿态跟踪问题。采用四元数描述姿态, 在姿态误差的描述中引入了现时姿态与期望姿态之间的方向余弦矩阵。考虑执行机构模型参数不确定和有外干扰的情况, 姿态误差动力学方程为多输入多输出(MIMO)的非线性系统。基于Lyapunov理论设计了鲁棒自适应控制器, 运用光滑投影算法避免了估计参数陷入奇异。仿真结果表明, 设计的鲁棒自适应控制律明显地缩小了姿态跟踪误差, 很好地解决了外部环境干扰和执行机构由于安装误差或机械磨损造成的轴承方向未对准的问题。     

精密转台系统非线性动态自适应控制器设计

提出了一种用于精密转台平滑鲁棒自适应控制器。通过基于σ改进方案的自适应律估计得到未知摩擦参数和非线性项的常值上界,并且利用一种平滑预测算法来改进用于估计不可测摩擦状态的双观测器。为了抑制不确定非线性项,加入了无抖振滑模控制项。通过Lyapunov方法证明了系统的位置跟踪误差是一致最终有界的。仿真研究表明了该控制方案的有效性。     

基于自适应模糊系统的空天飞行器非线性预测控制

 针对一类多输入多输出非线性不确定系统,提出了基于自适应模糊系统的非线性预测控制方法。控制器由基于模糊系统的非线性预测控制器和鲁棒自适应控制器两个部分组成。根据系统的跟踪误差在线调整模糊系统的权值,使得模糊系统一致逼近被控对象中的非线性函数,通过泰勒展开设计出基于模糊系统的非线性预测控制律,避免了预测控制在线优化带来的繁重的计算负担。鲁棒自适应控制器则用于减少不确定和模糊逼近误差对系统的影响。所设计的控制器保证了闭环系统的最终一致有界稳定。基于Lyapunov稳定原理,给出了理论证明和分析。最后利用提出的控制方案设计了空天飞行器高超声速飞行姿态的控制系统,仿真结果表明了控制方案的有效性。     

μ理论在柔顺力控制中的应用

研究μ理论在柔顺力控制系统中的应用.为模拟空间对接强制校正阶段的推出和拉近过程,提出基于6自由度并联机器人位置内环的柔顺力控制策略.综合考虑参数变化、模型变动和外来干扰等不确定性,利用μ综合控制理论设计鲁棒力控制器.通过μ分析比较鲁棒力控制器和经典力控制器的鲁棒稳定性和鲁棒性能.给出鲁棒力控制器和经典力控制器的实验结果,表明所设计鲁棒力控制器的有效性和优越性.     

自适应广义预测控制系统的鲁棒稳定性分析

研究当被控对象具有未建模动态、参数时变、非线性以及有界干扰时,自适应广义预测控制系统的鲁棒稳定性。提出了分析和设计鲁棒自适应广义预测控制系统的一般理论和方法。给出了一类满足弱化鲁棒稳定性条件的鲁棒参数自适应算法,并根据确定性等价原理将它和鲁棒广义预测控制律结合,建立了鲁棒间接自适应广义预测控制算法。采用统一的理论分析了已建立的自适应广义预测控制算法的全局稳定性和鲁棒性,得出了自适应控制系统具有鲁棒稳定性的新条件：自适应验后误差和对象参数估值变化的均值渐近小,从而弱化了现有自适应控制系统的鲁棒稳定性条件。     

一类非仿射输入和不确定性系统的输出跟踪控制

针对一类具有非仿射输入和不确定性的混沌系统,提出了鲁棒自适应RBFNN反演控制。RBF神经网络用来逼近设计过程中所有的未知非线性函数,并且对逼近的误差设计了鲁棒项,设计的自适应律是针对RBF所有权值的上界而不是权值本身,因而在线自适应参数数量减少了,节约了计算时间。该方法保证了混沌系统的输出能跟踪任意参考信号,并且跟踪误差是一致渐进收敛的。仿真结果表明该方法的可行性和有效性。     

基于混合区域极点配置的航空发动机全包线鲁棒变参数控制器设计

针对航空发动机全包线多变量鲁棒变增益控制器设计问题,提出了一种基于混合区域极点配置的鲁棒变参数控制方法。利用Jacobian方法建立多调度参数下的发动机仿射线性变参数(Linear parameter varying,LPV)模型,用于描述发动机全包线内的非线性动态特性;针对上述LPV模型,采用仿射参数依赖Lyapunov函数设计具有H∞鲁棒性能的状态反馈控制器,给出了控制系统全局稳定性的证明;并利用混合区域极点配置方法,将闭环系统极点配置到左半平面指定位置,以保证控制系统的动态特性及稳定裕度;进而引入凸多胞技术,将参数依赖线性矩阵不等式(Linear matrix inequality,LMI)方程转化为有限维LMI进行控制器求解,并得到了全局解。针对涡扇发动机的仿真结果表明:存在复杂量测噪声干扰条件下,鲁棒变参数控制器可以实现发动机全包线内控制指令的精确跟踪,系统阶跃响应的调节时间不超过1.5s,系统无超调,对控制期望的稳态跟踪误差在0.02%以内,符合发动机控制系统技术要求。     

直连式三体绳系卫星姿态鲁棒最优跟踪控制

 针对存在参数不确定性以及外部有界干扰的直连式三体旋转绳系卫星系统姿态跟踪控制问题,提出了一种分布式鲁棒最优控制方法。该方法首先针对单体绳系卫星姿态模型,在不考虑参数不确定性和干扰的条件下,应用Hamilton-Jacobi-Bellman方程设计了最优控制器;接着,考虑到实际系统存在参数不确定性和干扰,采用自适应与鲁棒误差积分方法在线学习参数不确定性和有界干扰,与最优控制器结合设计了鲁棒最优控制器,使闭环系统满足了性能指标达到最小的要求,并应用Lyapunov稳定性定理证明了其闭环系统的渐近稳定性。进一步考虑到绳系卫星系统的运动同步性,将单体绳系卫星姿态控制器设计扩展至直连式三体绳系卫星姿态系统,设计了分布式鲁棒最优控制器。最后在MATLAB/Simulink平台上进行了仿真,验证了方法的可行性与有效性,表明其具有潜在的应用前景。     

Nonlinear Adaptive Robust Force Control of Hydraulic Load Simulator

This paper deals with the high performance force control of hydraulic load simulator. Many previous works for hydraulic force control are based on their linearization equations, but hydraulic inherent nonlinear properties and uncertainties make the conventional feedback proportional-integral-derivative control not yield to high-performance requirements. In this paper, a nonlinear system model is derived and linear parameterization is made for adaptive control. Then a discontinuous projection-based nonlinear adaptive robust force controller is developed for hydraulic load simulator. The proposed controller constructs an asymptotically stable adaptive controller and adaptation laws, which can compensate for the system nonlinearities and uncertain parameters. Meanwhile a well-designed robust controller is also developed to cope with the hydraulic system uncertain nonlinearities. The controller achieves a guaranteed transient performance and final tracking accuracy in the presence of both parametric uncertainties and uncertain nonlinearities; in the absence of uncertain nonlinearities, the scheme also achieves asymptotic tracking performance. Simulation and experiment comparative results are obtained to verify the high-performance nature of the proposed control strategy and the tracking accuracy is greatly improved.     

High dynamic output feedback robust control of cascaded extended state observer

High dynamic tracking performance is a key technical index of hydraulic flight motion simulator(HFMS). However, the strong nonlinearities, various model uncertainties and measurement noise in hydraulic actuation systems limit the high dynamic performance improvement. In this paper, the outer axis frame of a HFMS is taken as a case study and its nonlinear dynamic model with consideration of strong nonlinearities, matched and mismatched uncertainties is established.A novel cascaded extended state ...     

基于LMI极点配置的高空台飞行环境模拟系统PI增益调度控制研究

针对高空台飞行环境模拟系统的温度和压力在整个工作包线内的鲁棒性能控制问题,提出了一种基于LMI极点配置的PI增益调度控制设计方法。在考虑变比热容腔微分方程、管道热传导、调节阀流量特性、液压伺服动态、传感器增益对飞行环境模拟系统造成的建模不确定性的基础上,建立了完整、准确的飞行环境模拟系统非线性模型;对非线性模型进行了线性化,并根据线性模型推导了基于LMI极点配置的PI控制器设计算法;在飞行环境模拟系统的工作包线内选取了36个稳态点设计了基于LMI极点配置的PI增益调度控制器;设计了两种飞行环境模拟试验来验证设计的PI增益调度控制器的鲁棒性能。仿真结果表明,飞行环境模拟系统温度的稳态误差和动态误差均小于0.1%,压力的稳态误差小于0.5%,动态误差小于0.7%。     

Fuzzy robust nonlinear control approach for electro-hydraulic flight motion simulator

A fuzzy robust nonlinear controller for hydraulic rotary actuators in flight motion simulators is proposed. Compared with other three-order models of hydraulic rotary actuators, the proposed controller based on first-order nonlinear model is more easily applied in practice, whose control law is relatively simple. It not only does not need high-order derivative of desired command,but also does not require the feedback signals of velocity, acceleration and jerk of hydraulic rotary actuators. Another advantage is that it does not rely on any information of friction, inertia force and external disturbing force/torque, which are always difficult to resolve in flight motion simulators. Due to the special composite vane seals of rectangular cross-section and goalpost shape used in hydraulic rotary actuators, the leakage model is more complicated than that of traditional linear hydraulic cylinders. Adaptive multi-input single-output(MISO) fuzzy compensators are introduced to estimate nonlinear uncertain functions about leakage and bulk modulus. Meanwhile, the decomposition of the uncertainties is used to reduce the total number of fuzzy rules. Different from other adaptive fuzzy compensators, a discontinuous projection mapping is employed to guarantee the estimation process to be bounded. Furthermore, with a sufficient number of fuzzy rules, the controller theoretically can guarantee asymptotic tracking performance in the presence of the above uncertainties, which is very important for high-accuracy tracking control of flight motion simulators.Comparative experimental results demonstrate the effectiveness of the proposed algorithm, which can guarantee transient performance and better final accurate tracking in the presence of uncertain nonlinearities and parametric uncertainties.     

A linear ADRC-based robust high-dynamic double-loop servo system for aircraft electro-mechanical actuators

Compared with traditional hydraulic actuators, an Electro-Mechanical Actuator(EMA)is small in size and light in weight, so it has become more widely used. Aerodynamic load on aircraft control surface varies dramatically, and a change of flight environment leads to uncertainties of motor parameters. Therefore, high-dynamic response and strong anti-disturbance capability of an EMA are of great significance for aircraft rudder control and flight attitude adjustment. In order to improve dynamic response and disturbance rejection of an EMA and simplify control parameters tuning, a robust high-dynamic servo system based on Linear Active Disturbance Rejection Control(LADRC) is proposed for an EMA employing a Permanent Magnet Synchronous Motor(PMSM).Firstly, total disturbances of the EMA are analyzed, including parameter uncertainties, load variation, and static friction. A disturbance observer based on a reduced-order Extended State Observer(ESO) is designed to improve the anti-interference ability and dynamic performance. Secondly, the servo control architecture is simplified to a double-loop system, and a composite control of position and speed with acceleration feed-forward is presented to improve the EMA frequency bandwidth.Thirdly, the ideal model of the EMA is transformed into a simple cascade integral form with a disturbance observer, which makes it convenient to analyze and design the controller. Robustness performance comparisons are realized in frequency domain. Finally, simulation and experimental results have verified the effectiveness of the proposed strategy for EMAs.     

Adaptive Nonlinear Optimal Compensation Control for Electro-hydraulic Load Simulator

 Directing to the strong position coupling problem of electro-hydraulic load simulator (EHLS), this article presents an adap-tive nonlinear optimal compensation control strategy based on two estimated nonlinear parameters, viz. the flow gain coeffi-cient of servo valve and total factors of flow-pressure coefficient. Taking trace error of torque control system to zero as control object, this article designs the adaptive nonlinear optimal compensation control strategy, which regards torque control output of closed-loop controller converging to zero as the control target, to optimize torque tracking performance. Electro-hydraulic load simulator is a typical case of the torque system which is strongly coupled with a hydraulic positioning system. This article firstly builds and analyzes the mathematical models of hydraulic torque and positioning system, then designs an adaptive nonlinear optimal compensation controller, proves the validity of parameters estimation, and shows the comparison data among three control structures with various typical operating conditions, including proportion-integral-derivative (PID) controller only, the velocity synchronizing controller plus PID controller and the proposed adaptive nonlinear optimal compensation controller plus PID controller. Experimental results show that systems’ nonlinear parameters are estimated exactly using the proposed method, and the trace accuracy of the torque system is greatly enhanced by adaptive nonlinear optimal compensation control, and the torque servo system capability against sudden disturbance can be greatly improved.     

On-line gain-tuning IP controller using RFNN

In this study an integral-proportional (IP) controller with on-line gain-tuning using a recurrent fuzzy neural network (RFNN) is proposed to control the mover position of a permanent magnet linear synchronous motor (PMLSM) servo drive system. The structure and operating principle of the PMLSM are first described in detail. A field-oriented control PMLSM servo drive is then introduced. After that, an IP controller with on-line gain tuning using an RFNN is proposed to control the mover of the PMLSM for achieving high-precision position control with robustness. The backpropagation algorithm is used to train the RFNN on line. Moreover to guarantee the convergence of tracking error for the periodic step-command tracking, analytical methods based on a discrete-type Lyapunov function are proposed to determine the varied learning rates of the RFNN. Furthermore, the proposed control system is implemented in a PC-based computer control system, Finally, the effectiveness of the proposed PMLSM servo drive system is demonstrated by some simulated and experimental results. Accurate tracking response and superior dynamic performance can be obtained due to the powerful on-line learning capability of the RFNN. In addition, the proposed on-line gain-tuning servo drive system is robust with regard to parameter variations and external disturbances     

机械手的神经网络自适应滑动模控制器设计

 针对多关节机械手的鲁棒跟随控制器设计问题，提出了一种新的机械手神经网络自适应滑动模控制器设计方法，机械手的动力学非线性假设是完全未知的。在提出的控制结构中，高斯径向基函数神经网络用于在线补偿机械手的动力学非线性，参数学习律由稳定性理论得到。给出了系统稳定性和参数收敛性的证明。最后提出方法的可行性通过仿真得到验证。     

Compound Control for Hydraulic Flight Motion Simulator

The design of a compound control is presented for the servo system of hydraulic flight motion simulator, which suffers from highly nonlinear dynamics, large parameter time-variation and severe load coupling among channels. The compound control is composed of a robust feedback controller and a feedforward compensator. The design aim is to achieve high tracking performance even in the presence of considerable uncertainty, external disturbance and load coupling among channels. Toward this aim the feedback controller for rejecting perturbation and disturbance is designed by using μ synthesis optimization technique and the feedforward compensator for compensating time lag of dynamic system is established based on the basic idea of zero phase error tracking. To validate the proposed control strategy, simulations and experiments are implemented, and show that the resulting system is highly robust against model perturbation and possesses excellent capability of suppressing the load coupling and improving the tracking performance.     

大摩擦情况下三轴飞行模拟转台QFT鲁棒控制器的设计

三轴飞行模拟转台是用于飞行控制系统半实物仿真的高性能位置跟踪和速度跟踪的一个重要设备。摩擦力和不确定性是三轴飞行模拟转台伺服系统的主要特性。在基于转台的动态和静态非线性Stribeck摩擦模型描述的基础上 ,考虑转台伺服系统的实际不确定性 ,设计了QFT鲁棒控制器 ,并给出了仿真和实时控制效果。