一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

分数傅立叶变换用于抑制SAR杂波背景检测慢速动目标

慢速运动目标在时、空、频域上都落入主杂波区。利用单通道SAR图像中静止背景的信息抑制静止杂波,可改善检测动目标的性能。分数傅立叶变换是线性变换,不存在交叉项,采用分数傅立叶变换搜索匹配动目标信号,使其能量汇聚。对称计算旋转角正负对称的分数傅立叶变换,在两个对称的分数傅立叶域中得到两个复信号,这两个复信号中静止背景的模处处相同,而包含动目标的区域,模的幅度有很大差别,计算对称的分数傅立叶域信号对应位置模的差,取绝对值,可对消静止背景,敏锐地检测动目标。实测数据表明本算法有效。     

基于时间反转和降阶Keystone的SAR-GMTI快速聚焦方法

对合成孔径雷达（SAR）地面运动目标聚焦技术进行了研究。针对现有运动目标聚焦方法存在的问题,提出了一种基于时间反转和降阶Keystone的SAR地面运动目标检测（SAR-GMTI）快速聚焦方法。首先,根据目标的机动特性建立了3阶距离模型;其次,针对目标多普勒中心模糊引起的多普勒谱分裂现象,结合所提时间反转处理（TRP）和降阶Keystone变换处理估计出运动目标2阶参数。此后,构造2阶相位补偿函数补偿运动目标的2阶距离徙动和多普勒徙动,从而完成运动目标的聚焦。同时,所提方法没有任何参数搜索过程,降低了计算复杂度。最后,仿真实验验证了所提算法的正确性和有效性。     

SAR极坐标格式成像算法对运动目标响应特性

运动目标的合成孔径雷达（SAR）成像特征是SAR地面运动目标指示（SAR/GMTI）系统进行运动目标检测、成像和重定位的基础。为此,从信号二维解耦合校正距离徙动角度推导和分析了极坐标格式算法（PFA）对运动目标的响应特性,揭示了极坐标格式转换过程中的距离插值和方位插值对运动目标距离徙动的校正原理。理论分析表明：PFA在完成对静止目标成像的同时,还能够自动校正所有运动目标的线性距离徒动,且校正过程无需目标运动信息,因此对于径向运动目标,在忽略波前弯曲条件下PFA也能够对其进行完全聚焦。最后,通过仿真数据处理对理论分析结果进行了验证,表明PFA作为一种运动目标成像预处理方法具有很大的应用前景。     

一种无人机定距盘旋跟踪制导律及稳定性证明

对地面目标的定距盘旋跟踪问题是无人机（UAVs）在任务应用阶段需要面临的重要问题之一,如何在传感器信息受限的情况下完成跟踪任务是目前的研究热点。首先针对地面固定目标设计了一种仅依赖测距传感器的制导律,不再需要传统的视线角信号以及目标和无人机自身的定位信息;其次,设计了李雅普诺夫函数对该制导律的稳定性进行了严格数学证明;最后,将该制导律推广到对地面匀速和变速移动目标的跟踪制导。相比于现有制导律,所提出的制导律结构更为简洁,仅有一个设计参数,并且制导策略更为合理。仿真结果表明所提出的制导律能够实现无人机对地面固定和移动目标的稳定跟踪。     

Moving target detection via airborne HRR phased array radar

We study moving target detection in the presence of temporally and spatially correlated ground clutter for airborne high range resolution (HRR) phased array radar. We divide the HRR range profiles into large range segments to avoid the range migration problems that occur in the HRR radar data. Since each range segment contains a sequence of HRR range bins, no information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector autoregressive (VAR) filtering technique to suppress the ground clutter. Then a moving target detector based on a generalized likelihood ratio test (GLRT) detection strategy is derived. The detection threshold is determined according to the desired false alarm rate, which is made possible via an asymptotic statistical analysis. After the target Doppler frequency and spatial signature vectors are estimated from the VAR-filtered data as if a target were present, a simple detection variable is computed and compared with the detection threshold to render a decision on the presence of a target. Numerical results are provided to demonstrate the performance of the proposed moving target detection algorithm     

MTI Processing and Weibull-Distributed Ground Clutter

It is shown that the Weibull-distributed ground clutter obeys a Weibull distribution after processing by the double canceler moving target indicator (MTI).     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

Multiple model nonlinear filtering for low signal ground target applications

The design and implementation of a multiple model nonlinear filter (MMNLF) for ground target tracking using ground moving target indicator (GMTI) radar measurements is described. Like the well-known interacting multiple model Kalman filter (IMMKF), the MMNLF is based on the theory of hybrid stochastic systems. However, since it models the probability distribution for the target in a region, rather than just the distribution's first and second moments, a nonlinear filter is able to capture more fine-grained detail of the target motion and requires fewer models than typical IMMKF implementations. This is illustrated here with a two-model MMNLF in which one motion model incorporates terrain constraints while the second is a nearly constant velocity (CV) model. Another feature of the MMNLF is that it enables incorporation of prethresholded measurements. To implement the filter, the target state conditional probability density is discretized on a set of moving grids and recursively updated with sensor measurements via Bayes' formula. The conditional density is time updated between sensor measurements using alternating direction implicit (ADI) finite difference methods, generalized for this hybrid application. In simulation testing against low signal-to-interference-plus-noise ratio (SINR) targets, the MMNLF is able to maintain track in situations where single model filters based on either of the component models or filters that use thresholded data fail. Potential applications of this work include detection and tracking of foliage-obscured moving targets.     

Data fusion for ground moving target tracking

The aim of ground surveillance is the large scale, continuous and near real time determination of a dynamical ground picture. This task comprises detection and tracking of moving single targets and convoys, mobile weapon systems, and military equipment. The sensors of choice are airborne Ground Moving Target Indicator (GMTI) radar and synthetic aperture radar (SAR). As ground target tracking often suffers from dense target situations, high clutter, and low visibility, the integration and fusion of external background information is essential for providing precise and continuous tracks. We present Multi Hypotheses techniques for tracking several targets in complex ground situations with clutter. Methods to incorporate topographic information, in particular digital road maps, are described and demonstrated.     

Automatic target recognition of time critical moving targets using1D high range resolution (HRR) radar

Synthetic Aperture Radar (SAR) imaging and Automatic Target Recognition (ATR) of moving targets pose a significant challenge due to the inherent difficulty of focusing moving targets. As a result, ATR of moving targets has recently received increased interest. High Range Resolution (HRR) radar mode offers an approach for recognizing moving targets by forming focused HRR profiles with significantly enhanced target-to-(clutter+noise) (T/(C+N)) via Doppler filtering and/or clutter cancellation. A goal of HRR ATR transition is the implementation and evaluation of algorithms exhibiting robustness under extended operating conditions (EOC). The public domain Moving and Stationary Target Acquisition and Recognition (MSTAR) data set was used to study 1D template-based ATR development and performance. Due to the unavailability of a statistically significant moving ground target data set, this approach was taken as an interim step in assessing the separability of ground targets when using range only discriminants. This report summarizes the data and algorithm methodology, simulated performance results, and recommendations     

Application of Road Information in Ground Moving Target Tracking

A new algorithm is developed to achieve accurate state estimation in ground moving target tracking by means of using road information. It is an adaptive variable structure interacting multiple model estimator with dynamic models modification （DMM VS-IMM for short）. Firstly, road information is employed to modify the target dynamic models used by filter, including modification of state transition matrix and process noise. Secondly, road information is applied to update the model set of a VS-IMM estimator. Predicted state estimation and road information are used to locate the target in the road network on which the model set is updated and finally IMM filtering is implemented. As compared with traditional methods, the accuracy of state estimation is improved for target moving not only on a single road, but also through an intersection. Monte Carlo simulation demonstrates the efficiency and robustness of the proposed algorithm with moderate computational loads.     

基于均值漂移无味粒子滤波的地面运动目标变结构交互多模型跟踪(英文)

为了跟踪地面运动目标,本文提出在变结构交互多模型基础上使用均值漂移无味粒子滤波的算法。模型滤波中,通过均值漂移将无味粒子滤波产生的采样粒子向目标状态最大后验密度估计方向移动。"停止"模型基础上,提出了"遮蔽"模型:出现地形遮蔽时,使用上一时刻的预测代替下一时刻的测量,且保持道路模型与遮蔽前一致。仿真实验采用地面运动目标指示雷达,考虑地面运动目标的三种常见场景:进入或离开道路、经过道路交叉点以及无测量值。使用了RMSE和ANEES两种评价指标,实验结果表明本文算法有效地提高了目标改变行驶道路时的跟踪精度;且目标速度过低或被遮蔽时,可以避免轨迹中断。     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

High Range Resolution Profile Automatic Target Recognition Using Sparse Representation

Sparse representation is a new signal analysis method which is receiving increasing attention in recent years. In this article, a novel scheme solving high range resolution profile automatic target recognition for ground moving targets is proposed. The sparse representation theory is applied to analyzing the components of high range resolution profiles and sparse coefficients are used to describe their features. Numerous experiments with the target type number ranging from 2 to 6 have been implemented. Results show that the proposed scheme not only provides higher recognition preciseness in real time, but also achieves more robust performance as the target type number increases.     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

Airborne GMTI radar position bias estimation using static-rotatortargets of opportunity

In target tracking systems: using GMTI (ground moving target indicator) radars on airborne platforms, the locations of these platforms are available from GPS-based estimates. However, these estimated locations are subject to errors that are, typically, stationary autocorrelated random processes, i.e., slowly varying biases. In situations where there are no known-location targets to estimate these biases, the next best recourse is to use targets of opportunity at fixed but unknown locations. Such targets can be, e.g., static rotators (ground-based radars with rotating antenna), which yield detections in moving target indicator (MTI) radars. It is shown that these biases can be estimated in such a scenario, i.e., they meet the complete observability condition. Following this, the achievable accuracy for a generic scenario is evaluated. It is shown that accurate georegistration can be obtained even with a small number of measurements     

Target motion compensation in synthetic aperture radar

In a synthetic aperture radar (SAR) targets on the ground that are moving become smeared as a result of velocity components parallel to the motion of the radar and are moved to radically different angular positions if they have velocity components perpendicular to the motion of the radar. Methods for restoring moving targets to their correct size and position are described. The samples collected for SAR processing are frequency-modulated RF pulses. Mathematically this leads to spectra that are described by Fresnel integrals. For stationary targets, the spectrum is symmetrical around the origin. If there is a moving target in a range cell, its Doppler spectrum will be displaced from the origin and may undergo other changes as a result of its nonzero velocity. Proper compensation to locate the target at the correct position requires that the spectrum be translated to a position dependent on the along-track velocity rather than to the origin. From the central frequency, the along-range velocity component can be estimated and the length of the translation can then be found. After translation, the spectrum is converted back to the time domain and the customary SAR processing is performed     

Dynamic Programming Solution for Detecting Dim Moving Targets

An on-board scanning or mosaic sensor is staring down from a satellite to a fixed ground point while producing a set of frames that contain target and background signals. Detecting dim moving targets should ideally be done by exhaustively searching over all in he maery(mached fltering), as ppoed possible trajectories in the imagery (matched filtering) as opposed to assembling trajectories from thresholded frames. The dynamic programming approach equivalently substitutes the above prohibitive exhaustive search by a feasible algorithm.     

基于稀疏阵列和码分信号的机载预警雷达STAP研究

基于稀疏阵列和码分正交信号,研究了机载雷达的空时自适应处理（STAP）技术,用于空中预警背景下的地面杂波抑制和运动目标探测。提出了稀疏阵列码分多相位中心孔径综合方法,采用正交编码信号实现多发多收,使综合后不同编码信号的相位中心在数量和分布情况上和满阵天线的相同,从而避免了稀疏阵列天线旁瓣较高的问题;在孔径综合的基础上,利用空时自适应处理方法完成杂波抑制,实现运动目标检测。仿真结果表明了本文方法的有效性。