Low-altitude target detection by coastline operated marine radar

Relevant to a Richian family of fluctuating targets with a composite background of sea-plus-land clutter, the performance prediction of a radar operating in near-coastal regions is elucidated by assuming noncoherent integration of the pulses. Considering the dominance of land clutter, a modified K-distributed statistic is indicated for the overall clutter envelope; and the corresponding probability of false alarm and probability of detection are deduced for fixed threshold detection (s) based on N pulses integrated in the presence of the sea-plus-land clutter and the noise. Even when the target offers a dominant scattered echo, the worst situations of the land clutter affecting the detection performance are indicated     

Matched subspace CFAR detection of hovering helicopters

A constant false alarm rate (CFAR) strategy for detecting a Gaussian distributed random signal against correlated non-Gaussian clutter is developed. The proposed algorithm is based on Scharf's matched subspace detector (MSD) and has the CFAR property with respect to the clutter amplitude probability density function (apdf), provided that the clutter distribution belongs to the compound-Gaussian family and the clutter covariance matrix is known to within a scale factor. Analytical expressions of false alarm and detection probabilities are derived. An application to the problem of detecting hovering helicopters against vegetated ground clutter is reported     

Detection probability using relative clutter in infrared images

Clutter plays a very important role in the area of machine and human-in-the-loop target acquisition. A great deal of interest has recently been shown in assessing several different definitions of clutter. In spite of so many definitions available, no single clutter definition has been agreed on by the target acquisition modeling community as being the best. Here we develop a new clutter metric, called relative clutter, based on factor analysis which is extensively used for statistical analysis. This relative clutter combines many definitions of clutter. Different methods for calculating the relative clutter based on the magnitude of the eigenvalues obtained from the correlation matrix are suggested. The relative clutter of many images is analyzed. The relative clutter is used to calculate probability of detection on Night Vision Lab (NVL) Terrain Board Infrared images     

Diffusion analysis of track loss in clutter

In tracking a target through clutter, the selection of incorrect measurements for track updating causes track divergence and eventual loss of track. The plot-to-track association algorithm is modeled as a Markov process and the tracking error is modeled as a diffusion process in order to study the mechanism of track loss analytically, without recourse to Monte Carlo simulations, for nearest-neighbor association in two space dimensions. The time evolution of the error distribution is examined, and the connection of the approach with diffusion theory is discussed. Explicit results showing the dependence of various performance parameters, such as mean time to lose track and track half-life, on the clutter spatial density are presented. The results indicate the existence of a critical density region in which the tracking performance degrades rapidly with increasing clutter density. An optimal gain adaptation procedure that significantly improves the tracking performance in the critical region is proposed     

一种基于FPGA的海杂波产生器设计

海杂波是反舰导弹末制导雷达回波的主要背景噪声,在末制导雷达模拟器的设计中,海杂波产生器是一个重要组成部分。在研究海杂波噪声概率分布密度的基础上,给出了一种基于FPGA技术的海杂波产生器的设计方案,并利用Altera公司的cyclone II系列芯片和QuartusII开发软件对设计进行了仿真验证。采用FPGA技术可以方便地对设计方案、海杂波的分布形式、数据量大小进行修改。仿真结果表明,该设计能够产生符合要求的海杂波信号,并且具有结构简单、集成度高、易于修改等特点。     

Analysis of CFAR performance in Weibull clutter

Recent interest has focused on order statistic-based (OS-based) algorithms for calculating radar detection thresholds. Previous analyses of these algorithms are extended, to determine closed-form approximations for the signal-to-clutter ratio required to achieve a particular probability of detection in clutter environments whose amplitude statistics are modeled by the Weibull distribution, and where the clutter dominates receiver noise. Performance is evaluated in both homogeneous and inhomogenous clutter. The analysis shows that the OS-based algorithm is quite robust against both interference and clutter edges. A method is suggested for improving performance at clutter inhomogeneities for short-range targets     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

Estimating matched filter amplitude probability functions byfailure rate analysis

Performance analysis of echolocation systems requires knowledge of the probability density function (pdf) or cumulative distribution function (cdf) of a matched filter output. A method is presented to estimate these and other probability functions from data by estimating the failure rate function, a function employed in reliability theory. The method can also be used to derive approximations to closed-form probability functions. The method is demonstrated using experimental sonar and radar clutter data and a closed-form radar clutter model     

区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

Radar Properties of Non-Rayleigh Sea Clutter

Measurements of sea clutter at low grazing angles using high- resolution radar show that the probability density p(x) of envelope detected sea clutter is not Rayleigh. Using the composite surface scattering model, a special varying clutter density p(x|?0) is proposed and is used to explain the non-Rayleigh nature of clutter. Since the clutter distribution has an enormous effect on the performance of a radar, the variation of the clutter densities, p(x) and p(x|?0), with various radar parameters such as frequency, pulsewidth, and polarization is found. Finally, a simulation of the composite surface scattering model is performed, and it verifies the effect of the various parameters on p(x).     

Spatially distributed target detection in non-Gaussian clutter

Two detection schemes for the detection of a spatially distributed, Doppler-shifted target in non-Gaussian clutter are developed. The non-Gaussian clutter is modeled as a spherically invariant random vector (SIRV) distribution. For the first detector, called the non-scatterer density dependent generalized likelihood ratio test (NSDD-GLRT), the detector takes the form of a sum of logarithms of identical functions of data from each individual range cell. It is shown under the clutter only hypothesis, that the detection statistic has the chi-square distribution so that the detector threshold is easily calculated for a given probability of false alarm P_F. The detection probability P_D is shown to be only a function of the signal-to-clutter power ratio (S/C)_opt of the matched filter, the number of pulses N, the number of target range resolution cells J, the spikiness of the clutter determined by a parameter of an assumed underlying mixing distribution, and P_F. For representative examples, it is shown that as N, J, or the clutter spikiness increases, detection performance improves. A second detector is developed which incorporates a priori knowledge of the spatial scatterer density. This detector is called the scatterer density dependent GLRT (SDD-GLRT) and is shown for a representative case to improve significantly the detection performance of a sparsely distributed target relative to the performance of the NSDD-GLRT and to be robust for a moderate mismatch of the expected number of scatterers. For both the NSDD-GLRT and SDD-GLRT, the detectors have the constant false-alarm rate (CFAR) property that P_F is independent of the underlying mixing distribution of the clutter, the clutter covariance matrix, and the steering vector of the desired signal     

False Alarm Rate for Rank Quantizer When Input Range Samples are not Independent

Under the assumption that the non-independent range samples fed into the rank quantizer form a first-order Markov sequence, the first threshold false alarm probability Pn is written in the form of a multiple integral, the multiplicity being equal to the number of samples or quantizer taps. The Rice model for narrow-band noise (clutter) is used to check the effect of correlation on Pn using the derived formula. For the limited case examined, correlation be tween samples decreases Pn as compared with the independent samples case.     

False alarm control using Doppler estimation

A technique which uses maximum-likelihood estimates (MLEs) of target Doppler and target amplitude is developed for rejecting clutter residues. Multiple estimates are made and consistency checks are applied to the estimates. Simulation results indicate that for large clutter-to-noise ratios (C/N⩾55 dB) the probability of false alarm from clutter residues is reduced from 1.0 to below 0.01     

变量相关情况下基于马尔可夫链样本模拟的线抽样可靠性灵敏度分析方法

针对变量具有相关性的可靠性灵敏度分析问题,提出了一种变量相关情况下基于马尔可夫链样本模拟的线抽样可靠性灵敏度分析方法。在所提方法中,首先将相关变量等价转换为独立正态变量,然后采用基于马尔可夫链样本模拟的线抽样方法,求解失效概率对等价独立正态变量分布参数的偏导数,最后利用等价变换前后变量分布参数之间的解析关系和复合函数求导法则,求得失效概率对相关变量分布参数的可靠性灵敏度。为了解所提方法的效率和精度,对所提方法的可靠性灵敏度估计值进行了方差分析。由于所提方法采用马尔可夫链快速产生失效域中的条件样本,这些失效域中的样本可用来准确获取重要方向,并可作为线抽样的随机样本,因而该方法具有很高的抽样效率。算例结果表明,所提方法是一种计算相关变量可靠性灵敏度的高效率、高精度方法。     

An improved multiple model GM-PHD filter for maneuvering target tracking

In this paper, an improved implementation of multiple model Gaussian mixture probability hypothesis density (MM-GM-PHD) filter is proposed. For maneuvering target tracking, based on joint distribution, the existing MM-GM-PHD filter is relatively complex. To simplify the filter, model conditioned distribution and model probability are used in the improved MM-GM-PHD filter. In the algorithm, every Gaussian components describing existing, birth and spawned targets are estimated by multiple model method. The final results of the Gaussian components are the fusion of multiple model estimations. The algorithm does not need to compute the joint PHD distribution and has a simpler computation procedure. Compared with single model GM-PHD, the algorithm gives more accurate estimation on the number and state of the targets. Compared with the existing MM-GM-PHD algorithm, it saves computation time by more than 30%. Moreover, it also outperforms the interacting multiple model joint probabilistic data association (IMMJPDA) filter in a relatively dense clutter environment.     

一种基于角度-多普勒补偿的均匀圆形天线机载雷达杂波抑制方法

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度 多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

A CFAR Design for a Window Spanning Two Clutter Fields

When the heterogeneous clutter field spanning the spatial sampling sliding window can be modeled as two contiguous homogeneous clutter fields with the statistical parameters of each field unknown and independent from field to field and with the transition point between fields also not known, then the cell-averaging constant false alarm rate (CFAR) performance significantly degrades, yielding target masking effects and loss of false alarm regulation. For the same defined and encountered environment spanning the sliding window, the performance degradation effects are shown to be largely eliminated when a newly developed class of CFAR tests is employed. These tests are designated as heterogeneous clutter estimating CFARs (HCE-CFAR). The test initially involves the combined use of multiple hypothesis testing and maximum likelihood estimation procedures to estimate the statistical parameters of each of the two fields, and the transition point between them, and then makes use of the relevant estimated clutter field parameters to effect the final decision rule. HCE-CFAR designs are presented for both the cases when the contiguous fields have Rayleigh first-order probability distributions, and log-normal probability distribution. However, the focus of the development and the conducted performance evaluation is for the Rayleigh clutter cases.     

基于决策不确定性的多目标跟踪传感器管理

针对高杂波、电子干扰环境,在量测驱动的多目标滤波框架下提出了一种基于决策不确定性的传感器管理方法。首先,根据部分可观测马尔科夫决策过程的理论,给出了基于Rényi信息增量的传感器管理一般方法。其次,综合考虑决策过程的信息完整性、信息质量、信息的内涵等因素,在量测驱动的自适应滤波框架下,基于目标运动态势评估多目标决策不确定性水平,并选取最大决策不确定性目标。最后,以最大决策不确定性目标的信息增量最大化为准则进行传感器分配方案的求解。仿真实验表明所提方法能够有效抑制电子干扰、杂波对多目标跟踪及传感器分配的影响,与基于威胁的传感器管理方法相比,所提方法的平均最优子模式分配（OSPA）距离及平均计算时长均显著降低,且在高杂波、电子干扰情形下具有较高的可靠性。     

The effect of the clutter-to-noise ratio on Doppler filterperformance

The effect of the clutter-to-noise ratio on the performance of a Doppler filter is considered. Clutter is assumed to have a power level which is unknown and varies in range. The assessment of the performance of a Doppler filter is based on the gain of the filter, which is the normalized output signal-to-interference ratio improvement at a given Doppler. The gain is generally a complex function of the statistics of the clutter. New upper and lower bounds on the gain differential between the expected design point clutter-to-noise ratio and the actual clutter-to-noise ratio are found. These bounds are independent of the clutter covariance matrix and are only a function of the unknown clutter-to-noise ratio. The bounds are valid for both Gaussian and non-Gaussian noise and for arbitrary linear filters. The upper and lower bounds differ by the theoretical coherent integration gain, 10 logN dB, where N is the number of pulses. A tighter lower bound is found for the case when the filters are matched filters. A simple exact expression is found for matched filters assuming a Gaussian Markov clutter model as the clutter spectral width approaches zero. An easily implementable adaptive procedure is given which improves performance due to the unknown clutter-to-noise ratio. This work extends a previous result, valid for the Emerson filter, that shows the effect of clutter-to-noise ratio on performance in terms of an average quantity, the improvement factor     

Neural network directed Bayes decision rule for moving targetclassification

In this paper, a new neural network directed Bayes decision rule is developed for target classification exploiting the dynamic behavior of the target. The system consists of a feature extractor, a neural network directed conditional probability generator and a novel sequential Bayes classifier. The velocity and curvature sequences extracted from each track are used as the primary features. Similar to hidden Markov model scheme, several hidden states are used to train the neural network, the output of which is the conditional probability of occurring the hidden states given the observations. These conditional probabilities are then used as the inputs to the sequential Bayes classifier to make the classification. The classification results are updated recursively whenever a new scan of data is received. Simulation results on multiscan images containing heavy clutter are presented to demonstrate the effectiveness of the proposed methods