IMM estimator with out-of-sequence measurements

In multisensor tracking systems that operate in a centralized information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence. In order to avoid either a delay in the output or the need for reordering and reprocessing an entire sequence of measurements, such measurements have to be processed as out-of-sequence measurements (OOSMs). Recent work developed procedures for incorporating OOSMs into a Kalman filter (KF). Since the state of the art tracker for real (maneuvering) targets is the interacting multiple model (IMM) estimator, the algorithm for incorporating OOSMs into an IMM estimator is presented here. Both data association and estimation are considered. Simulation results are presented for two realistic problems using measurements from two airborne GMTI sensors. It is shown that the proposed algorithm for incorporating OOSMs into an IMM estimator yields practically the same performance as the reordering and in-sequence reprocessing of the measurements. Also, it is shown how the range rate from a GMTI sensor can be used as a linear velocity measurement in the tracking filter.     

Update with out-of-sequence measurements in tracking: exact solution

In target tracking systems measurements are typically collected in "scans" or "frames" and then they are transmitted to a processing center. In multisensor tracking systems that operate in a centralized manner, there are usually different time delays in transmitting the scans or frames from the various sensors to the center. This can lead to situations where measurements from the same target arrive out of sequence. Such "out-of-sequence" measurement (OOSM) arrivals can occur even in the absence of scan/frame communication time delays. The resulting "negative-time measurement update" problem, which is quite common in real multisensor systems, was solved previously only approximately in the literature. The exact state update equation for such a problem is presented. The optimal and two suboptimal algorithms are compared on a number of realistic examples, including a GMTI (ground moving target indicator) radar case.     

One-step solution for the multistep out-of-sequence-measurement problem in tracking

In multisensor target tracking systems measurements from the same target can arrive out of sequence. Such "out-of-sequence" measurement (OOSM) arrivals can occur even in the absence of scan/frame communication time delays. The resulting problem - how to update the current state estimate with an "older" measurement - is a nonstandard estimation problem. It was solved first (suboptimally, then optimally) for the case where the OOSM lies between the two last measurements, i.e, its lag is less than a sampling interval - the 1-step-lag case. The real world has, however, OOSMs with arbitrary lag. Subsequently, the suboptimal algorithm was extended to the case of an arbitrary (multistep) lag, but the resulting algorithm required a significant amount of storage. The present work shows how the 1-step-lag algorithms can be generalized to handle an arbitrary (multistep) lag while preserving their main feature of solving the update problem without iterating. This leads only to a very small (a few percent) degradation of MSE performance. The incorporation of an OOSM into the data association process is also discussed. A realistic example with two GMTI radars is presented. The consistency of the proposed algorithm is also evaluated and it is found that its calculated covariances are reliable.     

Particle filters for tracking with out-of-sequence measurements

An extension is presented to the particle filtering toolbox that enables nonlinear/non-Gaussian filtering to be performed in the presence of out-of-sequence measurements (OOSMs) with arbitrary lag, without the need to adopt linearising approximations in the filter and without the degradation of performance that would occur if the OOSMs were simply discarded. An estimate of the performance of the OOSM particle filter (OOSM-PF) is obtained for bearings-only tracking scenarios with a single target and a small number of sensors. These performance estimates are then compared with the posterior Cramer-Rao lower bound (CRLB) for the state estimate rms error and similar performance estimates obtained from the oosm extended Kalman filter (OOSM-EKF) algorithms recently introduced in the literature. For a mildly nonlinear bearings-only tracking problem the OOSM-PF and OOSM-EKF are shown to achieve broadly similar performance.     

图象序列中机动目标的形心跟踪

从边检测边跟踪的角度探讨了图象序列中机动目标的形心跟踪问题,深入分析了强高斯噪声背景下目标形心估计的统计性质及用于形心估计的图象预处理方法。指出经典的图象二值化变换分割后作形心估计的方法面临着估计偏差和方差的矛盾,提出了用自适应交互三模型(ATIMM)跟踪图象序列中机动目标的方法,同时发现在了解目标形状的条件下,空间匹配滤波,二值变换点集聚类和 ATIMM三者的结合对图象序列中的机动目标具有最好的跟踪性能。     

Practical Fusion of Quantized Measurements via Particle Filtering

Most treatments of decentralized estimation rely on some form of track fusion, in which local track estimates and their associated covariances are communicated. This implies a great deal of communication; and it was recently proposed that by an intelligent quantization directly of measurements, the communication needs could be considerably cut. However, several issues were not discussed. The first of these is that estimation with quantized measurements requires an update with a non-Gaussian distribution, reflecting the uncertainty within the quantization "bin."; In general this would be a difficult task for dynamic estimation, but Markov-chain Monte-Carlo (MCMC, and specifically here particle filtering) techniques appear quite appropriate since the resulting system is, in essence, a nonlinear filter. The second issue is that in a realistic sensor network it is to be expected that measurements should arrive out-of-sequence. Again, a particle filter is appropriate, since the recent literature has reported particle filter modifications that accommodate nonlinear-filter updates based on new past measurements, with the need to refilter obviated. We show results that indicate a compander/particle-filter combination is a natural fit, and specifically that quite good performance is achievable with only 2-3 bits per dimension per observation. The third issue is that intelligent quantization requires that both sensor and fuser share an understanding of the quantization rule. In dynamic estimation this is a problem since both quantizer and fuser are working with only partial information; if measurements arrive out-of-sequence the problem is compounded. We therefore suggest architectures, and comment on their suitabilities for the task. A scheme based on delta-modulation appears to be promising.     

Unsupervised Tracking of Maneuvering Vehicles

The design of adaptive filters for the tracking of high-performance maneuvering targets is a fundamental problem in real-time surveillance systems. As is well known, a filter which provides heavy smoothing can not accurately track an evasive maneuver, and conversely. Consequently, one is led to the consideration of adaptive methods of filter design. This paper presents an improved self-adaptive filter algorithm for on-line solution of the above problem. Basically, this algorithm utilizes the orthogonality property of the residual time series to force the filter to automatically track the optimal gain levels in a changing environment.     

Active sonar application of a U-D square root PDAF

The probabilistic data association filter (PDAF) is a suboptimal approach to tracking a target in the presence of clutter. In the PDAF implementation, the Kalman measurement update is performed over the set of validated measurements and the Kalman time update is used to propagate the PDAF measurement update. A popular approach to obtaining a numerically stable set of Kalman update equations is to propagate the U-D factors of the covariance in the measurement and time updates. The PDAF measurement update equation is obtained in U-D factored form by applying the modified weighted Gram-Schmidt (MWG-S) algorithm to the three factored terms. The factors of the first two terms are determined from the U-D factors of the a priori and conditional a posteriori covariances. The third term is factored analytically using the Agee-Turner factorization. The resulting U-D square-root PDAF is then applied to the problem of active tracking of a submarine in reverberation using polar coordinates     

A class of near optimal JPDA algorithms

The crucial problem in multiple target tracking is the hit-to-track data association. A hit is a received signal from a target or background clutter which provides positional information If an incorrect hit is associated with a track, that track could diverge and prematurely terminate or cause other tracks to also diverge. Most methods for hit-to-track data association fall into two categories: multiple hypothesis tracking (MHT) and joint probabilistic data association (JPDA). Versions of MHT use all or some reasonable hits to update a track and delay the decision on which hit was correct. JPDA uses a weighted sum of the reasonable hits to update a track. These weights are the probability that the hit originated from the target in track. The computational load for the joint probabilities increases exponentially as the number of targets increases and therefore, is not an attractive algorithm when expecting to track many targets. Reviewed here is the JPDA filter and two simple approximations of the joint probabilities which increase linearly in computational load as the number of targets increase. Then a new class of near optimal JPDA algorithms is introduced which run in polynomial time. The power of the polynomial is an input to the algorithm. This algorithm bridges the gap in computational load and accuracy between the very fast simple approximations and the efficient optimal algorithms     

基于模板匹配的集中式多传感器群内目标精细跟踪算法

为解决多传感器探测下群内目标精细跟踪的难题,基于非机动情况下各探测周期内群内目标真实回波位置相对固定的特性,提出了一种基于模板匹配的集中式多传感器群内目标精细跟踪算法。该算法通过预关联成功的群状态集合与群量测集合分别建立模板形状矩阵和待匹配形状矩阵,利用匹配搜索模型和匹配矩阵确认规则选出代价最小的匹配矩阵,并基于模板和对应的匹配矩阵利用 kalman滤波完成群内各目标航迹的状态更新。仿真表明,与传统多传感器多目标跟踪算法中性能优越的基于数据压缩的集中式多传感器多假设算法相比,该算法在跟踪精度、实时性、有效跟踪率方面的性能明显优越,能很好的满足群内目标精细跟踪的实际工程需求。     

Data fusion of decentralized local tracker outputs

An approach for fusing offboard track-level data at a central fusion node is presented. The case where the offboard tracker continues to update its local track estimate with measurement and system dynamics models that are not necessarily linear is considered. An algorithm is developed to perform this fusion at a central node without having access to the offboard measurements, their noise statistics, or the location of the local estimator. The algorithm is based on an extension of results that were originally established for linear offboard trackers. A second goal of this work is to develop an inequality constraint for selecting the proper sampling interval for the incoming state estimates to the fusion node. This interval is selected to allow use of conventional Kalman filter algorithms at the fusion node without suffering error performance degradation due to processing a correlated sequence of track state estimates     

Shifted Rayleigh filter: a new algorithm for bearings-only tracking

A new algorithm, the "shifted Rayleigh filter," is introduced for two- or three-dimensional bearings-only tracking problems. In common with other "moment matching" tracking algorithms such as the extended Kalman filter and its modern refinements, it approximates the prior conditional density of the target state by a normal density; the novel feature is that an exact calculation is then performed to update the conditional density in the light of the new measurement. The paper provides the theoretical justification of the algorithm. It also reports on simulations involving variants on two scenarios, which have been the basis of earlier comparative studies. The first is a "benign" scenario where the measurements are comparatively rich in range-related information; here the shifted Rayleigh filter is competitive with standard algorithms. The second is a more "extreme" scenario, involving multiple sensor platforms, high-dimensional models and noisy measurements; here the performance of the shifted Rayleigh filter matches the performance of a high-order bootstrap particle filter, while reducing the computational overhead by an order of magnitude.     

Track labeling and PHD filter for multitarget tracking

Multiple target tracking requires data association that operates in conjunction with filtering. When multiple targets are closely spaced, the conventional approaches (as, e.g., MHT/assignment) may not give satisfactory results. This is mainly because of the difficulty in deciding what the number of targets is. Recently, the probability hypothesis density (PHD) filter has been proposed and particle filtering techniques have been developed to implement the PHD filter. In the particle PHD filter, the track labeling problem is not considered, i.e., the PHD is obtained only for a frame at a time, and it is very difficult to perform the multipeak extraction, particularly in high clutter environments. A track labeling method combined with the PHD approach, as well as considering the finite resolution, is proposed here for multitarget tracking, i.e., we keep a separate tracker for each target, use the PHD in the resolution cell to get the estimated number and locations of the targets at each time step, and then perform the track labeling ("peak-to-track" association), whose results can provide information for PHD peak extraction at the next time step. Besides, by keeping a separate tracker for each target, our approach provides more information than the standard particle PHD filter. For example, in group target tracking, if we are interested in the motion of a specific target, we can track this target, which is not possible for the standard particle PHD filter, since the standard particle PHD filter does not keep track labels. Using our approach, multitarget tracking can be performed with automatic track initiation, maintenance, spawning, merging, and termination     

基于自适应Kalman滤波的导引头随动系统设计

主要研究导引头随动系统中探测器信号处理延迟的影响及其补偿控制算法。提出了一种自适应Kalman滤波延迟补偿方案,利用Kalman滤波的预测能力得到当前时刻视线角的估计值,进而得到此时的跟踪误差的估计值,取代被延迟的探测器输出进行闭环控制。考虑到导引头探测器的低更新频率、非等间隔量测等工程特点,又对上述滤波算法进行了一系列改进。仿真表明方法可以明显提高导引头在弹体扰动情况下的跟踪精度。     

Tracker and signal processing for the benchmark problem with unresolved targets

Radar signal processing is particularly important in tracking closely spaced targets and targets in the presence of sea-surface-induced multipath. Closely spaced targets can produce unresolved measurements when they occupy the same range cell of the radar. These issues are the salient features of the benchmark problem for tracking unresolved targets combined with radar management, for which this paper presents the only complete solution to date. In this paper a modified version of a recently developed maximum likelihood (ML) angle estimator, which can produce two measurements from a single (unresolved) detection, is presented. A modified generalized likelihood ratio test (GLRT) is also described to detect the presence of two unresolved targets. Sea-surface-induced multipath can produce a severe bias in the elevation angle measurement when the conventional monopulse ratio angle extractor method is used. A modified version of a recently developed ML angle extractor, which produces nearly unbiased elevation angle measurements and significantly improves the track accuracy, is presented. Efficient radar resource allocation algorithms for two closely spaced targets and targets flying close to the sea surface are also presented. Finally, the IMMPDAF (interacting multiple model estimator with probabilistic data association filter modules) is used to track these targets. It is found that a two-model IMMPDAF performs better than the three-model version used in the previous benchmark. Also, the IMMPDAF with a coordinated turn model works better than the one using a Wiener process acceleration model. The signal processing and tracking algorithms presented here, operating in a feedback manner, form a comprehensive solution to the most realistic tracking and radar management problem to date.     

The Effect of the Common Process Noise on the Two-Sensor Fused-Track Covariance

This note deals with the effect of the common process noise on the fusion (combination) of the state estimates of a target based on measurements obtained by two different sensors. This problem arises in a multisensor environment where each sensor has its information processing (tracking) subsystem. In the case of an ?-? tracking filter the effect of the process noise is that, over a wide range of its variance, the uncertainty area corresponding to the fused estimates is about 70 percent of the single-sensor uncertainty area as opposed to 50 percent obtained if the dependence is ignored.     

运动平台上基于粒子滤波的目标跟踪技术

在固定平台上实现视频运动目标的准确跟踪本身就是一项富有挑战性的工作。何况在运动平台上,受到背景杂波、亮度变化以及摄像机运动等干扰的影响,要想成功地对目标进行跟踪则更加困难。提出将强度梯度跟踪器与粒子滤波相结合,实现对运动平台上的视频序列中的运动目标的准确跟踪。实验结果表明,跟踪方法能准确、可靠地自动跟踪视频序列中的运动目标。     

Joint integrated probabilistic data association: JIPDA

A new recursive filter for multi-target tracking in clutter is presented. Multiple tracks may share the same measurement(s). Joint events are formed by creating all possible combinations of track-measurement assignments and the probabilities for these joint events are calculated. The expressions for the joint event probabilities incorporate the probabilities of target existence of individual tracks, an efficient approximation for the cluster volume and a priori probability of the number of clutter measurements in each cluster. From these probabilities the data association and target existence probabilities of individual tracks are obtained, which allows track state update and false track discrimination. A simulation study is presented to show the effectiveness of this approach.     

多坐标系下目标跟踪的联合滤波

针对雷达目标观测和处理在不同的坐标系下完成，本文提出了联合滤波算法来跟踪机动目标。该算法以卡尔曼滤波器为基础，直角坐标系下和极坐标系下的算法相联合，不仅克服了两种坐标系下滤波算法的不足，而且对机动目标有很好的跟踪效果。仿真实验结果表明了该算法的有效性。     

密集杂波背景下的水下多目标跟踪方法

水下多目标跟踪是水声信号处理领域研究的热点和难点问题。高斯混合概率假设密度(Gaussian mixture probability hypothesis density, GM-PHD)滤波器以其高效的计算效率为解决水下多目标跟踪问题提供了保证。然而,GM-PHD滤波器在跟踪目标时需要先验已知新生目标的强度,否则其性能会出现严重退化。针对该问题,提出一种滑动窗两步初始化高斯混合概率假设密度(sliding window two step initialization GM-PHD, SWTSI-GMPHD)滤波器。将提出的滑动窗两步初始化方法嵌入GM-PHD滤波器,利用滑动窗两步初始化方法估计新生目标强度,减少杂波干扰导致跟踪结果中出现的虚假目标。仿真实验表明,在杂波密集环境下,相较于其他跟踪方法,提出方法将跟踪精度提高69.84%,52.62%和41.05%。