主被动传感器UT-DC目标定位算法

主被动传感器融合定位具有高度非线性,针对采用传统的线性化方法计算变量统计特性,理论定位结果与实际定位结果相差较大的情况,文章提出了基于不敏变换(UT)的数据压缩(DC)融合定位算法。首先,通过不敏变换精确计算了二维变量的统计特性,减小了非线性误差的影响;其次,针对数据压缩过程中量测信息重复利用的问题进行去相关性处理,获得较高的定位精度;最后,通过理论分析和仿真结果验证,相较于传统的线性化处理方式相差较大的情况,基于不敏变换的数据压缩融合定位方法理论结果与实际结果相吻合。     

基于ECEF的广义最小二乘误差配准技术

 雷达组网数据处理首先要进行误差配准,来准确地估计和消除系统误差。传统的误差配准技术多基于球极投影,当雷达之间距离较远时,给配准结果引入一定的误差。基于地球中心坐标系(ECEF),提出了一种广义最小二乘的ECEF-GLS误差配准技术,较好地解决了远距离误差配准问题,误差分析表明,如果忽略模型线性化引入的误差,配准结果达到了CRLB下限。最后,使用仿真数据验证了算法的性能,并和Zhou提出的基于ECEF坐标系的最小二乘ECEF-LS误差配准算法进行了比较。     

基于图的DTAD的简易稳健自动生成算法

二维任意域(含任意多个空腔)的Delaunay三角剖分(简记为DTAD)广泛应用于有限元网格生成等方面。本文提出了一种基于图的DTAD的简易稳健自动生成算法。该算法首先构造任意域中所有边界点集的约束最小生成树,然后将同时满足本文所给三个简易约束算法的边逐次引入初始三角形网格表,形成边界点集的三角剖分,再通过稳健局部优化算法和贴体生成核插入算法自动生成DTAD。本文同时分析了退化及数值计算误差对剖分结果的影响,在提高局部优化的稳健性方面对该算法做了进一步完善,使之能更好地满足任意域网格剖分的要求。文末给出具体应用实例以说明本文所提算法的有效性。     

Emitter localization using clustering-based bearing association

A closed-form emitter location estimator using time difference of arrival (TDOA) measurements is developed based on triangulation of hyperbolic asymptotes. The problem of associating the asymptotes with the emitter is solved by clustering the bearing angles of the linear asymptotes using a kernel density estimate. A closed-form estimate of the emitter location is obtained from triangulation of the clustered bearings using a weighted version of the pseudolinear estimator. By way of simulation examples, the proposed closed-form estimator is shown to outperform the computationally demanding and divergence-prone maximum likelihood (ML) estimator at moderate TDOA noise levels.     

An all-sky autonomous star map identification algorithm

The attitude of the spacecraft can be obtained with accuracy by using star sensors. Its key technology is how to identify stellar maps. Triangle algorithm is used most widely in the current star map identification algorithms. In the field of physical geography modelling, Delaunay triangulation cutting algorithm has been widely used because of its important characteristic; the result of this triangulation cutting method is unique from a random set of points. This triangulation algorithm is first applied to identify star map for its particular character. In final, the proposed method is applied to simulation; the results show that compared with the current star map identification algorithms, the algorithm presented in this paper has the advantage of real-time properties and robustness. It needs a smaller database of guidance stars and matches more rapidly.     

信道状态信息指纹定位算法性能评价方法研究

基于WiFi的定位技术大多使用接收信号强度,但该方法受多径和噪声干扰较大,精度有待提高。信道状态信息(channel state information, CSI)能够更加精细地描述信道状态,具有更强的稳定性。将CSI作为格点特征建立指纹定位数据库,利用该指纹库和在线测量数据,比较了多种定位算法在位置指纹法中的定位效果,并提出了评价KNN、wKNN和随机森林算法的一种评价依据和样本容量扩充方法,分析了三种方法随样本容量增加时定位时间和定位精度的稳定性,从包含定位精度在内的多种角度更加全面地评估了三种方法。结果表明,在以上三种定位算法中,随机森林算法的定位时间与定位精度的稳定性最好。     

Trajectory Estimation with Multi-range-rate System Based on Sparse Representation and Spline Model Optimization

The classic state methods for trajectory estimation in boost phase with multi-range-rate system include method of point-by-point manner and that of spline-model-based manner. Both are deficient in terms of model-approximation accuracy and systematic error determination thus resulting in the estimation errors well beyond the requirements, especially, concerning the maneuvering trajectory. This article proposes a new high-precision estimation approach based on the residual error analysis. The residual error comprises three components, i. e. systematic error, model truncation error and random error. The approach realizes self-adaptive estimation of systematic errors in measurements following the theory of sparse representation of signals to minimize the low-frequency components of residual errors. By taking median- and high-frequency components as indexes, the spline model-approximation is improved by optimizing node sequence of the spline function and the weight selection for data fusion through iteration. Simulation has validated the performances of the proposed method.     

系统误差条件下的多运动站无源定位性能分析

 系统误差的存在可能对无源定位的性能带来较大影响。针对多运动站得到的含有系统误差的观测量信息,推导了定位误差的克拉美-罗下限(CRLB)。首先根据具体系统误差模型推导测量误差的统计信息,然后根据系统误差导致不同时刻观测量相关的特点,将非对角矩阵的误差协方差矩阵写为分块矩阵的形式,并在此基础上推导其递推计算式,最后以系统误差情况下多运动站只测角无源定位为例进行定位性能的仿真分析。仿真结果表明系统误差的存在对定位误差CRLB影响较大,在定位中需要重点考虑。     

Moving Emitter Classification

One of the problems that plague emitter location systems is the presence of data from emitters that are in motion. If this motion is not detected, erroneous location estimates and filled data files result. An algorithm to classify an emitter as moving or stationary is presented along with extensive illustrations and results based upon simulated data.     

基于Bang-Bang控制思想的迭代学习控制算法研究

根据迭代学习控制基本原理,吸取了Bang-Bang控制的思想,提出了新的迭代学习控制算法。与常用的利用迭代误差或误差变化率进行控制率计算的算法相比,该算法只需根据迭代误差的符号即可计算控制率,不仅大大减小了计算工作量,而且增强了系统的抗干扰能力。给出了算法表达式和控制结构图,进行算法收敛性分析。仿真结果表明该算法的有效性和收敛性。     

A new method for finding electromagnetic emitter location

The position of a source of radiation is often obtained from bearing data, taken over an interval of time, and combining it with navigation data. A new method using total least squares (TLS) has been suggested for the accurate estimation of an emitter location when bearing observation errors are random. Further, an iterative two-stage approach involving TLS and Kalman filtering is developed for accurate estimation of the emitter location when bearing observation errors are an algebraic sum of random and systematic errors. The elegance and efficacy of the proposed methods are illustrated through digital computer simulated examples     

平面近场测试中探头位置误差的分析

文章首先给出了平面近场测试中探头位置误差对远场的误差表达式;然后,利用计算机仿真的方式分析了平面近场测试中位置误差对-50dB副瓣的影响。此种误差分析方法根据概率论的知识,结合天线方向图的特点,从全域的角度对误差进行评估,更全面的考虑了所有的因素,从而结果更为可靠和精确,并得到了一些有用的规律和结果,为平面近场测试中误差的分析提供了一定的理论依据。     

Determination of ground emitter location

Passive techniques to locate ground emitters from an airborne platform provide threat warning to aircraft in hostile airspace while maintaining the electronic silence of the vehicle. These techniques are based on triangulation methods and extended Kalman filters, using only hearing measurements. An approach that takes into consideration the maximum measurement error of the sensor and approximates an area of uncertainty of the emitter location by polygons is proposed. The performance of this algorithm is demonstrated by simulation results, and an example is shown for the comparison of this algorithm and the extended Kalman filter approach     

自校准定轨方法的精度评定

推导了自校准定轨的误差协方差公式。与非校准方法相比,指出了自校准定轨能够同时修正系统误差和改善定轨精度,并提出了敏感度矩阵在选取校准参数中的作用及其值得注意的方面。     

基于星间激光测距的三星时差定位系统标校方法

利用精确的星间激光测距信息,提出了基于星间测距的三星时差定位系统标校方法。该方法消除了副星相对位置系统误差对定位精度的影响,同时提出了副星相对位置系统误差的解析解法,建立了模型误差和对副星相对位置系统误差进行估算的误差的定量关系,并证实了基于星间激光测距的标校方法可以在较大范围内提高定位精度。     

Terrain intervisibility-believe it or not?

Computer generated digital maps with terrain intervisibility displays are becoming a common addition to aircraft cockpits. Also known as masking plots, these displays show dangerous regions exposed to threats, highlight terrain visible from the current (or future) aircraft location, and keep track of regions hidden from view during searches with various types of sensors. High resolution displays of semi-transparent intervisibility overlaid on sharp clear digital maps are very convincing but can they be believed? Not completely. Intervisibility displays serve a valuable function. But to build and use these systems wisely, it is good to understand the errors and limitations involved. At LMFS, we have integrated digital maps from other companies into avionics systems such as Army Special Operations Aircraft and MH-53J, and have analyzed the errors associated with the use of level 1 and level 2 terrain elevation data from the National Imagery and Mapping Agency (NIMA). We have also developed a number of real-time intervisibility and probabilistic intervisibility functions using a hybrid of multiresolution techniques and algorithms to obtain the best results possible for a given set of computer resources. This paper explores some of the problems, solutions, and human/machine interface considerations associated with the generation and use of intervisibility     

Effect of Sensor Errors on Automatic Gunfire Control

A formal approach is introduced toward mathematically relating errors in processed sensor data to their impact on error in gunfire of ground based, antiaircraft defense systems. An initial budget for sensor errors is formulated in terms of the accuracy requirements imposed upon the gunfire. The analysis is applicable to gun sites that are remotely located from the sensor as well as to colocated gun sites. Here, the radial components of sensor errors (along the sensor track line) are found to affect the target-miss distance of a remote gun by at least an order of magnitude more than their effect on the miss distance of a colocated gun. However, the effects of the traverse components of sensor errors (across the sensor track line) are found comparable in magnitude between remote and colocated guns.     

基于强跟踪UPF的重力梯度辅助定位方法

针对重力梯度辅助定位中,存在重力梯度的强非线性分布及系统模型偏差等问题,将STUPF引入匹配定位过程。该方法根据残差信息实时调节系统状态跟踪能力,有效应对模型偏差对定位的影响。基于真实INS数据的仿真实验结果表明,STUPF可达到较好的定位效果,且与标准PF、GPF算法相比,其在定位的精度、稳定性及运算量上具有一定优势。     

Elliptical Error Statistics for Radiolocation Analysis

A review is made of current techniques used in the statistical analysis of radio direction finding data which predict a region of probable transmitter location based upon a collection of intersecting lines of bearing measurements. This region has been conventionally defined by the elliptical error probability (EEP). Two characterizations for EEP are considered, and a technique is proposed for robust estimation of the elliptical region of probable location.     

修正极坐标系下雷达与ESM航迹对准关联

研究了存在系统误差时修正极坐标系(MPC)下的雷达与电子支援措施(ESM)航迹关联问题。系统误差导致MPC下雷达和ESM的角度估计产生偏移,而对角度变化率、距变率与距离的比值(ITG)的估计影响不大;结合非中心卡方分布的知识,分析了雷达与ESM的测量误差对非中心参数和正确关联概率的影响;提出了一种基于积分重合度的雷达与ESM航迹对准关联算法。首先将雷达与ESM的目标映射到角度-角度变化率空间,分别得到了雷达与ESM的目标曲线,然后对两目标曲线求积分重合度,估计出雷达与ESM测角系统误差的偏移量,对偏移量补偿后进行雷达与ESM的航迹关联。仿真结果表明,本文所提算法能有效地提高存在系统误差时雷达与ESM正确航迹关联概率。