大规模场景的百分比近邻软阴影绘制算法

针对传统软阴影绘制算法在面对大规模三维场景时绘制效率较低的问题,文章基于四叉树加速结构的阴影图构建,研究了邻域节点的搜索方法和遍历顺序的选择方法,提出了一种基于四叉树的百分比近邻软阴影算法。实验结果表明,与传统算法相比,该方法能够有效提高大规模三维场景的软阴影绘制效率,且性能稳定,可以渲染出高质量的软阴影效果。     

一种凹多边形凸分解的全局剖分算法

提出了一种凹多边形凸分解的全局剖分算法。首先对局部剖分算法的原理及存在的问题进行了阐述,并对基于正负法搜索可视点串的算法进行了更正和改进,然后利用改进的权函数从全局剖分的角度选择最优的剖分点进行剖分。同局部剖分算法相比,提高了剖分后所得的多边形形态质量。该算法主要作为轮廓偏置算法的前期处理算法,对原轮廓进行分解,提高了原轮廓多边形进行轮廓偏置算法的运行效率。     

用自适应蚁群算法求解集中网站的WEB搜索优化策略

如何提高web信息搜索的效率,改善搜索的性能,是信息检索领域一个重要的研究课题。首先利用自适应蚁群算法求得针对特定类别的最小集中网站集,再通过网页聚类,找到能获得最完全而准确信息的网页序列,从而提高web搜索的速度和准确率。     

三维Euler方程的自适应非结构网络计算

介绍一种三维自适应非结构网格的Euler方程求解技术。采用有限体积中心差分的格点格式对Euler方程进行空间离散,多步龙格-库塔时间推进,并采用当地时间步长、焓阻尼修正等加速收敛。采用Delaunay三角剖分技术生成三维流场的四面体网格。网格自适应技术中的网格局部加密也采用Delaunay三角剖分技术。最后用ONERAM6机翼的跨音速绕流计算说明本文方法的有效性。     

基于值域的多约束GNSS单频单历元定姿新算法

多天线增强了全球卫星导航系统（GNSS）单频单历元姿态测量解算模型的强度,但随着天线数量增加,模糊度维数成倍增加,从模糊度域确定搜索空间的计算量将显著增长。基于此,提出了基于值域的多约束多天线GNSS单频单历元姿态测量新算法：该算法将姿态约束融入值域搜索模型,利用姿态约束条件推导搜索步长,通过姿态域三维搜索确定模糊度搜索空间,以基于最优条件姿态解非迭代近似估计的方法固定模糊度。实验结果表明,新算法中模糊度搜索效率较原方法提高约65.8%,固定模糊度效率较标准迭代算法提高约95.3%,且与标准迭代算法性能相当;所提算法能够实现GNSS单频单历元的模糊度固定和载体全姿态测量,具有较高的正确率。     

基于自适应粒子群优化算法的无人机三维航迹规划

针对传统的粒子群优化算法容易陷入局部最优解的问题,提出了一种自适应粒子群优化算法,在迭代寻优过程中自适应地调节惯性权重和2个学习因子的数值。建立了无人机在山区环境执行勘察任务的航迹规划环境模型,分析了无人机自身约束条件。设计了自适应粒子群优化算法的适应度函数和航迹规划算法流程。分别采用自适应粒子群优化算法和传统粒子群优化算法开展了无人机三维航迹规划仿真实验。仿真结果对比表明,所提出的自适应粒子群优化算法比传统粒子群优化算法具有更高的全局搜索能力和搜索精度。     

一种改进的快速航路规划方法

通过改进启发式A*算法流程及数据结构,结合航迹规划多约束条件的实际,提出了一种快速可行的航迹规划方法.该方法考虑了飞机机动性能约束和终端进人方向角约束,建立专家知识库,缩小了搜索空间.将A*算法中的OPEN表映射到CLOSED表中,采用嵌套二叉树管理OPEN表和CLOSED表,提高了算法的搜索和执行效率.最后提出循环插...     

一种trimmed曲面的半自适应离散方法

提出了一种 trimmed曲面的半自适应离散算法。该算法通过对曲面的参数域进行预剖分,以及引进参数曲面上一点处的“最大法曲率”的概念,采用分区域处理的方法分片对 trimmed曲面的有效参数域进行三角形网格剖分。该方法计算速度快,能根据曲面的法曲率变化来控制 trimmed曲面三角化剖分的密度,并可有效地避免在三维空间产生奇异三角形与“裂缝”。     

分层嵌套重叠网格自适应树结构动态组装方法

采用重叠网格可以有效地进行复杂流动的大规模数值模拟,特别是包含运动部件(如旋翼、投弹)的动态模拟。本文将树结构的自适应直角网格用于重叠网格组装过程中的切割和贡献单元的搜索,大大加快重叠网格的组装速度。通过二叉树自适应直角网格对物体外形进行离散,实现切割过程的快速定位;采用八叉树自适应直角网格对流场区域进行离散,高效地搜索贡献单元。使用基于壁面距离准则的重叠区域最小化方法和分层嵌套重叠策略,能提高重叠网格组装的效率和质量。对于具有运动部件的动态重叠网格问题,采用多个二/八叉树减少组装过程中信息更新的冗余计算,从而大幅度减少重叠网格组装的时间消耗。实际算例的重叠网格组装结果说明本文发展的重叠网格组装方法具有很高的计算效率,可以满足运动边界复杂流动问题的动态计算要求。     

基于一致性预处理技术的作业车间调度算法研究

为降低CSP调度算法的计算复杂度和减少搜索过程中回溯发生概率,采用一致性预处理技术来预先修剪和过滤搜索空间。仿真实验证明:两种方法的综合运用可以显著提高CSP调度算法的搜索效率,从而为CSP调度算法求解大规模作业车间调度问题提供可能。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.