基于PTE的多雷达航迹融合算法

针对杂波背景下的多雷达航迹融合时局部估计误差互协方差矩阵未知的问题,提出基于目标存在概率（PTE）的航迹融合算法,提升了正确航迹率和跟踪精度。首先,通过综合概率数据关联得到单接收站的目标航迹估计集合和对应的目标存在概率。然后,在局部估计误差互协方差矩阵未知的条件下,基于PTE信息提出不带记忆的综合广义凸组合航迹融合算法。进而将前一帧的融合状态进行反馈,提出带记忆的综合广义凸组合航迹融合算法。仿真验证了所提算法的有效性。     

基于空间多特征综合推理的航迹航路关联

针对航迹分类问题,研究了基于空间多特征的综合推理在航路判读中的应用。首先根据空管系统对航路以及飞机飞行的要求,对航迹航路相关问题进行建模。然后根据已知的传感器系统输出的目标特性(位置,航向)与已知的多个航路信息分别进行相关度计算,构造基本信任函数,通过对其融合,得到目标单特征识别结果。其中,通过合理地引入复合类,实现了对目标类别的广义信任分类。建立了多特征折扣融合算法,对多特征基本信任函数进行折扣后再融合,得到目标多特征识别结果。仿真结果以及空管实际数据测试表明:该算法不仅可以实现航迹分类,同时可以有效地降低分类的错误率。     

预警机多传感器信息融合技术研究

针对预警机多传感器信息融合问题,介绍了信息融合的基本原理与框架,在此基础上给出了信息预处理、多航迹相关和航迹融合的具体算法,并针对融合的过程进行了仿真验证,结果表明本算法具有工程可行性。     

基于序贯关联算法的多目标无源跟踪

基于序贯关联算法,对多目标无源跟踪问题进行了研究。在只有角度信息可以利用的情况下,首先,利用波门技术对各个无源传感器角度测量数据进行关联和滤波,形成参数航迹;然后,将各个无源传感器的参数航迹送到融合中心进行关联配对,并在关联过程中通过构造关联质量函数对参数航迹的关联历史情况进行度量,解决参数航迹关联模糊问题;最后,通过对关联成功的参数航迹进行交叉定位,给出多个不同目标的位置信息,实现分布式无源系统对多目标的数据关联和跟踪,并通过仿真分析,对算法的有效性和可行性进行验证。     

基于一致关联数最大化的航迹关联算法

航迹关联(TTTA)是多传感器数据融合系统的核心模块之一,是系统误差估计和航迹融合的前提和基础。传感器存在的固有系统误差使得目标位置状态估计与真值发生偏离,容易诱发TTTA错误。传统的基于全局最小距离准则的TTTA算法,需要获得较高精度的系统误差估计,来对航迹数据进行误差补偿。针对传感器具有系统误差环境下的TTTA问题,在对TTTA进行间接评估的基础上,定义了一致关联数的概念,提出了一致关联数最大化的TTTA准则,并在稳健交替迭代的框架下完成算法设计。与距离函数不同,一致关联数是一个离散量,放松了对系统误差估计精度的要求。最后,仿真实验验证了所提算法的有效性。     

基于模板匹配的集中式多传感器群内目标精细跟踪算法

为解决多传感器探测下群内目标精细跟踪的难题,基于非机动情况下各探测周期内群内目标真实回波位置相对固定的特性,提出了一种基于模板匹配的集中式多传感器群内目标精细跟踪算法。该算法通过预关联成功的群状态集合与群量测集合分别建立模板形状矩阵和待匹配形状矩阵,利用匹配搜索模型和匹配矩阵确认规则选出代价最小的匹配矩阵,并基于模板和对应的匹配矩阵利用 kalman滤波完成群内各目标航迹的状态更新。仿真表明,与传统多传感器多目标跟踪算法中性能优越的基于数据压缩的集中式多传感器多假设算法相比,该算法在跟踪精度、实时性、有效跟踪率方面的性能明显优越,能很好的满足群内目标精细跟踪的实际工程需求。     

分布式无源传感器系统多目标跟踪算法

研究了分布式无源多传感器系统多目标跟踪问题,在只有测向信息可以利用的情况下,分布式系统首先利用波门技术分别对各个无源传感器角度测量数据进行关联配对和滤波;然后,将处理结果送到融合中心,在融合中心通过构造的χ2分布检验统计量进行多目标方位航迹的关联;最后,通过交叉定位和位置信息融合获得多个目标的位置信息估计,实现无源多目标跟踪。论文通过仿真分析对算法的有效性和可行性进行了验证。     

基于高斯混合模型的航迹抗差关联算法

针对雷达系统误差时变、上报目标不完全一致等复杂场景下目标航迹关联问题,采用高斯混合模型（GMM）与航迹间拓扑信息相结合的方法实现航迹抗差关联。将航迹关联问题转化为图像匹配中的非刚性点集匹配问题,建立对非同源航迹具有鲁棒性的高斯混合模型,根据航迹间的邻域拓扑信息决定高斯混合模型中各高斯组成部分的权重,利用期望最大值（EM）算法求解高斯混合模型的最优闭合解,在期望步（E-step）阶段求解航迹的对应关系,在最大化步（M-step）阶段求解非同源航迹比例,最后进行航迹关联判决以获得关联结果。仿真结果表明,该算法在不同系统误差、目标分布密度、探测概率等环境下具有较好有效性和鲁棒性。     

一种分布式异步航迹融合算法

在多被动传感器目标跟踪中,融合中心处理的信息一般是同步的,然而实际情况并非如此。另外,一些被动传感器只能得到目标的方位信息,无法单独形成有效航迹,这就需要将各传感器数据同步到相同时刻,然后应用同步融合算法。针对被动传感器探测系统,采用传感器到传感器融合和系统到传感器融合的分布式融合结构,并对各局部传感器引入全局反馈,对相关信息采用协方差交叉算法进行处理,完成被动传感器异步数据的融合,仿真结果表明,该算法具有较好的融合效果。     

一种基于模糊遗传算法的多传感器多目标跟踪数据关联算法

基于模糊遗传算法发展了一种新的数据关联算法。数据关联的静态部分靠一个模糊遗传算法来得出量测组合序列和S-D分配的m个最优解。在数据关联的动态部分，将得到的S-D分配的m个最优解在一个基于多种群模糊遗传算法的动态2D分配算法中依靠一个卡尔曼滤波估计器估计出移动目标各个时刻的状态。这一基于分配的数据关联算法的仿真试验内容为被动式传感器的航迹形成和维持的问题。仿真试验的结果表明该算法在多传感器多目标跟踪中应用的可行性。另外，对算法发展和实时性问题进行了简单讨论。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.