共查询到19条相似文献,搜索用时 140 毫秒
1.
从"谢菲尔德"号驱逐舰沉没的教训,揭示了固体火箭发动机低易损性设计的重要性.分析、讨论了研制钝感推进剂、采用新型复合材料壳体和壳体采用特殊结构设计等新技术在发动机低易损性设计中的应用.对我国开展战术导弹固体火箭发动机低易损性的研究和应用提出了建议. 相似文献
2.
3.
4.
提出了固体火箭发动机喷管喉衬结构综合设计准则──间隙临界值δk的概念,详细介绍了该设计准则δk的计算公式推导过程及其应用。并通过某固体火箭发动机四种不同技术状态喷喉结构的地面试车得到试验验证。 相似文献
5.
基于图形变形法探索固体火箭发动机优化设计空间,通过可视化展示设计空间形态,能够提高固体火箭发动机优化设计效率和质量。采用试验设计方法对设计变量和约束条件重要性进行排序,简化优化模型;采用图形变形法对简化优化模型在不同试验设计点进行可视化分析;可视化选取可行设计空间中目标函数较小的点作为初始点。应用三种常规优化算法对4个不同初始点进行优化计算,计算结果表明,图形变形法优选的初始点使优化效率有不同程度的提高,优化结果具有更好的全局最优解特性;与遗传算法比较,效率提高400倍以上。 相似文献
6.
7.
8.
设计了橡胶回弹特性的测试实验方法,对固体火箭发动机用氟橡胶圈密封材料(F108)回弹特性进行了研究。分析了固体火箭发动机实际使用条件下材料压缩状态、材料截面直径以及环境温度对橡胶圈回弹特性的影响,给出了部分回弹速度函数,为固体火箭发动机密封圈的设计提供了参考数据。 相似文献
9.
10.
11.
为了降低靶机的生产成本,提高靶机发动机的推重比,建立了基于固体火箭引射式组合发动机模型,其结构包括固体火箭与再燃室,两者之间的布局可分为固体火箭内置式和固体火箭外置式,为了优化发动机布局结构,采用再燃室定量加热方法模拟发动机工作过程,分别对内置式及外置式布局发动机进行了数值计算。计算结果表明:在相同的入口引射面积条件下,随着加热量的增加,内、外置式发动机引射效率都降低,内置式布局发动机推力基本不变,外置式布局发动机推力逐渐增大,具有较高的推力及推力增益(最高达到39.3%);由此可知,外置式发动机具有更好的推力性能。为了进一步优化外置式布局发动机,分别计算了引射口尺寸L与固体火箭出口直径D之比(L/D)为1/6,2/6,3/6,4/6,5/6,6/6的六种工况。结果表明:随着L/D从1/6增大到6/6,引射效率、推力及推力增益呈现先增大后减小的趋势,在L/D为4/6时,发动机引射效率和推力达到最大,此时发动机性能最优。 相似文献
12.
The results of the comprehensive numerical analysis for dynamics of intrachamber processes that appear at nozzleless solid propellant rocket engine (SPRE) actuation are presented. A complete cycle of rocket engine operation is analyzed. We solve a conjugate problem involving the igniter actuation; heating, ignition and following combustion of a solid propellant charge; a combustion product flow in the combustion chamber; depressurization of the combustion chamber, and the subsequent motion of the rocket engine blank; variation of the combustion surface geometry at the expense of the gradual and nonuniform burnout of solid propellant web. 相似文献
13.
14.
15.
16.
本文通过对某单室双推力发动机推力测试技术的探讨,提出了解决单室双推力固体火箭发动机推力测试技术的改进方法。它对其它发动机也是通用的。 相似文献
17.
A new type of plasma rocket engine, the Kabila rocket, using a radioisotope heated thermionic heating chamber instead of a conventional combustion chamber or catalyst bed is introduced and it achieves specific impulses similar to the ones of conventional solid and bipropellant rockets. Curium-244 is chosen as a radioisotope heat source and a thermal reductive layer is also used to obtain precise thermionic emissions. The self-sufficiency principle is applied by simultaneously heating up the emitting material with the radioisotope decay heat and by powering the different valves of the plasma rocket engine with the same radioisotope decay heat using a radioisotope thermoelectric generator. This rocket engine is then benchmarked against a 1 N hydrazine thruster configuration operated on one of the Pleiades-HR-1 constellation spacecraft. A maximal specific impulse and power saving of respectively 529 s and 32% are achieved with helium as propellant.Its advantages are its power saving capability, high specific impulses and simultaneous ease of storage and restart. It can however be extremely voluminous and potentially hazardous. The Kabila rocket is found to bring great benefits to the existing spacecraft and further research should optimize its geometric characteristics and investigate the physical principals of its operation. 相似文献
18.
固体推进剂的老化,会使其燃速、爆热值下降,势必会影响固体火箭发动机的内弹道性能,从而影响导弹的正常飞行。文中介绍了通过3台超期贮存的某型固体发动机的解剖,并对其推进剂的燃速和爆热进行了试验测定;根据试验数据,对该型超期固体发动机进行了内弹道仿真及相关计算,得到了不同贮存期发动机的比冲和推力,为正确评估该型发动机服役寿命提供了参考数据。 相似文献