共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
本文根据稳定性分析的前屈曲完全理论和修正型的Hahn-Tsai非线性本构关系,采用有限元法分析了复合材料层合回转壳的非线性稳定性,讨论了屈曲产壳体法向与面内支承条件和复合材料的横向和剪切非线性性能对壳体结构总体稳定性的影响,为工程结构设计者们提供了一些有益的参考意见。 相似文献
4.
5.
6.
为研究振动载荷和定应变对HTPB推进剂基体/颗粒粘接界面的影响,进行了振动载荷和定应变作用下HTPB推进剂高温老化试验,测试了不同载荷和老化时间下推进剂的宏观力学性能,利用扫描电镜观测了推进剂的细观破坏过程,基于颗粒增强本构理论,分析了推进剂基体/颗粒粘接界面的损伤规律。结果表明,振动载荷和定应变的作用使HTPB推进剂的初始模量和抗拉强度均减小,高温老化、定应变和振动载荷的作用都会破坏推进剂基体/颗粒粘接界面、降低推进剂固体颗粒模量增强效果,定应变状态下振动载荷作用后,粘接界面损伤最严重。 相似文献
7.
8.
9.
含损伤非线性粘弹性本构模型及数值仿真应用 总被引:2,自引:0,他引:2
提出了一种含累积损伤的非线性粘弹性本构方程,通过数值展开,获得该应力更新方程和切线模量矩阵,利用FORTRAN语言编制了自定义材料本构模型子程序,将子程序融合到ABAQUS软件中进行有限元数值仿真。通过验证试验证明了所建立的非线性粘弹性本构方程及数值方法的准确性和实用性,为装药结构完整性数值仿真提供了较为精确的本构模型及材料子程序。 相似文献
10.
11.
从汉译英的赘冗和疏漏问题看汉英语法特征之差异——汉语语法的柔性之于英语语法的刚性 总被引:1,自引:0,他引:1
本文从汉译英的翻译实践出发,从英语译文的错误以及汉英译文对比中,去发现并分析汉语和英语语法特征的差异。论述了英语语法的刚性、显性和汉语语法的柔性、隐性,并从语言对思维的影响的角度,探讨了汉语语言文化的深邃独特和英语语言的缜密精确。 相似文献
12.
Antenna for precise orbit determination 总被引:2,自引:0,他引:2
Johan Wettergren Magnus Bonnedal Per Ingvarson Bo Wstberg 《Acta Astronautica》2009,65(11-12):1765-1771
The ESA SWARM mission will consist of three satellites that will measure the Earth magnetic field. The system calls for metre accuracy knowledge of the measurement locations. To achieve this a GPS receiver is used. At least four GPS signals are tracked to determine the code and carrier ranges, from which the position can be derived. The accuracy improves when using more GPS satellites and by averaging over many measurements. The latter is achieved in ground processing with a model-based orbit prediction, resulting in cm accuracy. The main error contributions in the processing are often measurement errors due to satellite multi-path effects. The multipath effects are characterized by measuring the antenna on a 1.5 m mock-up, representing the 9 m long satellite. In order to verify that the mock-up is representative, extensive electromagnetic simulations were made. The simulations included the antenna and the complete satellite and were then reduced to the antenna and a section of the satellite. The actual design of the antenna was performed with several levels of software. First, a fast bodies-of-revolution simulation found a geometry with the right coverage. Then, a finite element method simulation allowed us to match the antenna at two frequencies simultaneously. 相似文献
13.
陈静 《华北航天工业学院学报》2008,(5):61-62
如何加强档案规范化管理,充分发挥档案在实际工作中的作用,本文从档案的收集、整理、保管、利用和人员的素质五个方面来进行阐述。从而提高人们对档案室管理工作的认识,以确保档案室管理工作的进一步提高。 相似文献
14.
针对高轨伴星时差频差无源定位系统中卫星位置、速度、时差和频差等参数的测量系统误差严重影响定位精度的问题,提出了一种基于四个或四个以上已知位置的地面标校源的高斯-牛顿定位算法。该算法首先利用差分法消除星间时差、频差测量的系统误差,再利用标校源的时差频差测量方程组估计出主星和伴星的相对位置和相对速度误差,最后结合时差、频差、地球球面以确定非合作辐射源位置。理论和数字仿真均表明在时差和频差测量的随机误差较小时,本文算法的均方根误差(MSE)接近克拉美-罗下限(CRLB)。
相似文献
相似文献
15.
HMX含量对HTPB复合固体推进剂微波衰减的影响 总被引:1,自引:0,他引:1
研究了HMX含量对HTPB复合固体推进剂微波衰减的影响。实验结果表明:含HMX的HTPB复合固体推进剂的微波衰减随HMX含量的增加而增加,HMX含量由5%增加到50%时,HTPB复合固体推进剂的微波衰减增加了约1倍。 相似文献
16.
The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure. 相似文献
17.
18.
在新版《军用标准体系表》中,测控技术标准作为24项共用技术之一被单独列项,为测控技术标准体系建设提供了良好机遇。在扼要介绍新版《测控技术标准体系》的基础上,对新版《测控技术标准体系》的构建思路、技术特点进行了简要分析。 相似文献
19.
王玉新 《华北航天工业学院学报》2000,10(2):53-57
运动的破缺产生差异,导致涨落,造成对系统原有方向、轨道的偏离,致使事物发展与进化,由此带来一系列富有生机和活力的启示。作为系统内在机制的协同与竞争,也深深地楔人了我们的生活。 相似文献
20.
介绍了SiC/Al复合材料单向板和正交板试样的拉—拉疲劳特性和疲劳破坏机理研究结果。研究结果表明,SiC/Al板试样拉—拉循环5×10~4次后,其剩余静拉伸强度系数超过0.87,随着循环应力水平的提高,材料的剩余静拉伸强度几乎没有变化,但声发射信号的起始峰值向应变增大方向移动;疲劳将导致复合材料表面产生温升,通过测量材料表面温度的变化,可以提前预告SiC/Al复合材料的疲劳破坏。 相似文献