共查询到17条相似文献,搜索用时 343 毫秒
1.
三维后体尾喷管是吸气式高超声速飞行器产生推力、升力的关键部件,需要精细设计,最大限度地提升三维膨胀过程中的气动特性。本文在二维后体尾喷管优化设计的基础上,发展了一种三维后体尾喷管的优化设计方法。通过参数化建模、三维喷管计算网格自动生成、空间推进CFD解算器及NSGA-II多目标优化软件等技术手段,对后体尾喷管三维构型进行了多目标优化设计。优化后的三维后体尾喷管与原始喷管相比,推力和升力都得到了较大提升。 相似文献
2.
高超声速飞行器后体/尾喷管一体化设计 总被引:7,自引:0,他引:7
采用实数编码、小生境技术、稳态复制策略、多目标定级排序技术,改进了标准遗传算法,建立了多目标遗传算法,并将其应用于高超声速飞行器后体/尾喷管的一体化设计,以尾喷管的推力、升力和附加俯仰力矩系数为性能目标,得到了优化问题的Pareto最优前沿面,优化结果显示了设计变量与性能目标之间的关系,并提出了建议的外形方案。该优化算法可进一步推广应用于包含更加精确的流动模型的优化设计当中。 相似文献
3.
针对超燃冲压发动机宽马赫数、攻角范围内高性能工作要求,建立了基于试验设计方法和代理模型的可调尾喷管多目标优化设计方法,获得了尾喷管结构随马赫数和攻角变化的调节规律.以推力系数、升力系数和力矩系数为优化目标,以三次型线尾喷管为对象,采用遗传算法优化设计,得到Pareto最优解集;以一组Pareto最优解为基准在不同马赫数和攻角下进行尾喷管变结构设计优化,拟合得到尾喷管结构随马赫数和攻角的变化曲线.仿真结果显示了理论分析的正确性,并发现:变结构设计实现了尾喷管大范围高性能工作;尾喷管性能和几何参数,飞行状态参数均高度非线性,任一个改变都会影响其性能;采用试验设计方法和代理模型,能大大缩小优化设计时间,简化设计过程. 相似文献
4.
基于Isight优化平台,将多目标遗传算法与CFD计算相结合,针对超燃冲压发动机非对称尾喷管冷/热态俯仰力矩差较大的问题,对下壁面为三次曲线的尾喷管构型进行多目标优化,分析了初始膨胀角和尾缘角的相互耦合及其对喷管性能影响所占比重。结果表明,设计区间内,下壁面三次曲线构型在保持较高推力特性的前提下,可以大范围调整喷管俯仰力矩,显著改善喷管冷/热态俯仰力矩差较大的问题。在此基础上,选取优化所得点进行冷流缩比风洞实验,根据实验条件进行了相应的数值模拟,对比发现数值模拟与实验结果吻合很好,验证了该优化设计方法及结果的有效性和可靠性。 相似文献
5.
高超声速飞行器后体喷管设计 总被引:2,自引:1,他引:2
为得到二维高超声速飞行器后体喷管优化型面, 建立了基于N-S方程的二维后体喷管设计模型, 分别对内部喷管长度和上壁型面进行设计, 得到了后体喷管优化设计外形, 并将结果与Edwards提供的基准进行比较, 表明改进了后体喷管的推进性能. 相似文献
6.
尾喷管构型对多循环两相脉冲爆轰发动机流场及性能影响 总被引:2,自引:1,他引:2
为了研究尾喷管构型对多循环工况下非定常气液两相脉冲爆轰发动机推进性能的影响,运用适应能力强的非结构网格CE/SE(时空守恒元和求解元)方法数值研究了带尾喷管脉冲爆轰发动机的内外流场.结果表明:尾喷管对脉冲爆轰发动机性能的影响在单次循环和多循环工况下有显著差异;当燃料填充率为1、环境压力为0.1MPa时,完成一个周期各种构型尾喷管产生的平均推力由大到小依次为拉伐尔喷管、塞式收敛扩张喷管、收敛喷管、无喷管、直喷管;研究中塞式收敛扩张喷管可以提供最大的冲量和燃料比冲,但完成单个循环的周期最长. 相似文献
7.
8.
二元保形非对称膨胀喷管流场特性 总被引:1,自引:1,他引:0
利用数值模拟方法对一种与无人飞行器后体一体化设计的二元保形大宽高比非对称膨胀喷管在地面状态的流场特性进行了研究,获得了尾喷管推力性能和三维流动特征随落压比的变化趋势.结果表明:虽然二元保形非对称膨胀喷管沿横向存在非等强度膨胀,但在研究范围内最佳落压比仍主要取决于上方短膨胀面结束位置面积与喉道面积之比;沿横向不等强度膨胀... 相似文献
9.
10.
11.
12.
《Aerospace Science and Technology》2002,6(6):395-405
As continuation of the former study [P. Gruhn et al., Aerospace Science and Technology 4 (2000) 555–565], we examine the flow at a SERN nozzle for a future hypersonic cruise vehicle with help of a nozzle/afterbody wind tunnel model. Main focus is on the flow at the nozzle flap and the separation of the boundary layer at the flap cowl. The location of this separation is determined for different nozzle pressure ratios and different Reynolds numbers. An empirical criterion to predict the separation point at the flap cowl of the nozzle/afterbody model is established.Based on the experiments and recent studies, a geometry for the nozzle flap of the reference configuration ELAC of the Collaborative Research Center 253 of the Aachen University of Technology is suggested. Numerical studies result in an improved axial thrust going along with an improved thrust vector angle for this new flap in the whole examined Mach range between 1.23 and 7. The improvements of up to 11 percent in axial thrust coefficient and up to 15° in thrust vector angle at low Mach numbers exceed the progresses made for the nozzle of the nozzle/afterbody model in the former study. 相似文献
13.
喷流落压比对高超飞行器尾喷管内外流干扰的实验 总被引:1,自引:1,他引:0
为了研究吸气式高超声速飞行器尾喷流对飞行器尾部区域气动性能的影响,在中国空气动力研究与发展中心05m高超声速风洞中,在来流马赫数为50和60条件下,开展了不同落压比条件下的尾喷流干扰测压实验研究,同时采用高清纹影观测了喷流干扰区域的流场结构。实验结果表明:不同喷流落压比时,飞行器尾部区域表面压力分布差别明显,高落压比时喷流干扰作用的区域更大,压强数值更高。纹影也显示高落压比时交叉干扰激波更强、剪切层扩张更明显。喷流干扰区域已影响到了飞行器水平翼区域的压力分布,将会对飞行器操纵特性产生影响。 相似文献
14.
15.
16.
Hypersonic high-enthalpy wind tunnels have been a challenge to ground tests in aerospace research area for decades and its test flow uniformity is one of the most important parameters for evaluating wind tunnel performances. Regarding to the performance requirement, theories and methods for designing hypersonic flow nozzles at high enthalpy conditions are quite difficult, but very interesting topics, especially when air molecule dissociations take place in wind tunnel test gas reservoirs. In thi... 相似文献
17.
Flap contour optimization for highly integrated SERN nozzles 总被引:3,自引:0,他引:3
Patrick Gruhn Andreas Henckels Stefan Kirschstein 《Aerospace Science and Technology》2000,4(8):555-565
The performance of a Single Expansion Ramp Nozzle (SERN) for hypersonic cruise vehicles is examined with focus on the flow at the nozzle flap and the corresponding separation of the boundary layer. Two wind tunnel models are used to analyze the interaction of the free stream and the nozzle flow and the flow at the flap in detail. A finite element flow code is employed to support the design of the flap model and the analysis of the flow.Comparative contour studies show that the size and the location of the separation at the flap cowl and therefore the aerodynamic quality can be influenced by optimizing the flap cowl contour. The position of the separation is measured for different contours and varying Reynolds numbers at laminar, transitional and turbulent flow conditions. Numerical studies of a nozzle/afterbody configuration suggest an improvement of up to 3.5% in axial thrust for optimized flap contours in the examined Mach range between 1.64 and 6. At the same time the rotation of the thrust vector is reduced by up to 5° at lower Mach numbers. 相似文献