发动机连杆的可靠性灵敏度设计

将可靠性设计理论与灵敏度分析方法相结合,讨论了发动机连杆的可靠性灵敏度设计问题,提出了可靠性灵敏度设计的计算方法,给出了可靠性灵敏度的变化规律,研究了设计参数的改变对连杆可靠性的影响,为连杆的可靠性设计提供了理论依据。      

装备可靠性试验与评价技术的进展

在对装备可靠性试验与评价所面临的问题与挑战进行分析的基础上,对装备可靠性试验与评价相关问题的研究现状进行了总结。针对装备可靠性试验与评价工程需求的特点,给出了可靠性试验与评价研究的关键技术。最后,对可靠性试验与评价技术的发展趋势进行了总结。     

机载雷达可靠性设计与试验

在简要说明机载雷达可靠性研究的意义后,详细阐述了对歼击飞机火控雷达开展可靠性设计、可靠性试验、可靠性增长等工作的情况,总结了雷达研制中可靠性设计方法,并给出系统进一步提高可靠性的工作程序。     

机载电子产品可靠性试验实施方法研究

可靠性试验是可靠性工程的重要组成部分,本文对可靠性增长试验和可靠性鉴定试验的基本技术进行了分析和研究,明确了其内涵及实质,同时根据我国军用飞机可靠性工程研制的特点,给出了军用飞机机载电子产品的可靠性试验实施的方式和方法。     

某型产品可靠性鉴定试验研究

结合产品实际给出了可靠性鉴定试验的设计思路,并将整机的可靠性指标分配至相应的分系统,通过对各分系统的可靠性鉴定达到了考核整机可靠性的目的。     

可靠性技术的应用与管理问题的探讨

阐述了可靠性工程的内容 ,对可靠性的管理进行了探讨 ,提出了可靠性管理目前存在的问题和改进建议。     

某型飞机数字防滑刹车控制盒可靠性分析与设计

对某型飞机数字防滑刹车控制盒的可靠性进行了分析,利用工程加权法对控制盒进行了可靠性分配,并通过元器件可靠性预计法对控制盒的可靠性进行预计.对比及验证表明,控制盒可靠性设计合理,满足主机及系统要求.     

军用直升机可靠性的综合化发展

介绍了国内外军用直升机可靠性技术的发展历程,阐述了先进技术对军用直升机可靠性的影响。以某直升机为例,介绍了在研制过程中,为提高其可靠性水平,提出了可靠性、维修性、保障性(简称R&M&S)参数,以及为达到参数指标规定的定量要求需综合考虑的R&M&S工作项目。结合国内可靠性技术特点,提出了对未来军用直升机可靠性工作的几点看法。     

可靠性增长技术及其应用

说明可靠性增长技术包括可靠性分析技术、可靠性试验技术和可靠性管理技术;介绍了在产品寿命周期的早期和后期阶段所实施的不同可靠性增长技术;进行可靠性增长工作应制定可靠性增长大纲,确定可靠性研制／增长试验产品,全面开展可靠性增长工作并重视对有关人员的培训工作。     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

高超声速边界层的转捩及预测

首先描述了边界层转捩的基本过程及研究内容。在此基础上,指出了高超声速边界层不同于不可压缩边界层的流动不稳定性特性,并介绍了边界层的转捩机理与感受性特征;给出了高超声速三维边界层中预测转捩的常用方法,并着重介绍了多用于工程实际的e N方法以及对e N方法的理性改进,同时列举了在高超声速三维边界层中应用e N方法实现转捩预测的多个实例。最后,分析并总结了高超声速边界层转捩预测所存在的困难及需要解决的问题。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.