基于卡尔曼滤波和主元分析的发动机性能衰退

在给定测量参数基础上,通过非线性估计得到对应离散时刻的部件性能参数,利用数据插值方法扩充测量参数。利用主元分析方法对这些测量参数进行分解,提取反映性能衰退的成分,以此构造反映性能变化的统计量,假定该统计量服从,分布,对性能衰退情况做进一步分析,得到在10000时间点附近性能衰退最为严重,已超过阀值,与前面参数估计结果相符。用部件性能衰退分析方法对发动机性能状况监控,为及时采取维护措施提供了一定的指导作用。     

基于非线性约束模型的发动机部件性能衰退研究

引入流量因子和效率因子,通过在稳态模型中修改流量因子和效率因子,模拟几种性能失效形式,分析了它们引起压气机和涡轮测量参数的变化.以发动机稳态模型为基础,构建优化部件性能参数的非线性约束模型,得到部件性能参数的衰退过程.在得到的性能参数基础上,代入到发动机稳态模型,得到对应的测量参数,同时滤掉噪声的干扰.又运用雅克比矩阵建立部件性能参数与测量参数的对应关系,得到的测量参数与非线性结果进行比较,证明了非线性约束模型计算发动机测量参数的优越性     

航空发动机鲁棒线性变参数滤波器设计

针对航空发动机线性变参数(LPV)模型部件性能参数估计问题,给出了一种新的鲁棒LPV滤波器设计方法。基于参数依赖的二次Lyapunov函数及仿射二次稳定性概念得到了稳定且满足H∞性能指标滤波器存在的充分条件,利用函数多凸性概念将其转化为线性矩阵不等式(LMI)约束下的常规凸优化问题,得到了滤波器的解。针对某型退化涡扇发动机部件性能参数估计的仿真结果表明,该滤波器的精度和鲁棒性满足设计要求。     

基于支持向量机和卡尔曼滤波器的航空发动机故障诊断研究

针对航空发动机上可用传感器测量参数偏少情况下的健康参数估计问题,提出1种先分类后估计的方法。将传感器测量参数输入异常监测模块,对发动机工作状态进行监测,若监测结果为无故障则直接给出无部件故障的诊断结论;否则将测量参数输入最小二乘支持向量机(LSSVM),对部件故障进行分类,卡尔曼滤波器根据分类结果只对故障部件的健康参数进行估计。仿真结果表明:该方法可以减少需要估计的健康参数,提高估计精度。     

航空发动机健康参数的卡尔曼滤波估计方法分析

针对航空发动机气路部件健康参数估计问题,研究了基于线性和非线性模型的卡尔曼滤波估计方法.通过对气路部件渐变故障的仿真,比较了卡尔曼滤波(KF)、扩展卡尔曼滤波(EKF)、无味卡尔曼滤波(UKF)三种方法对健康参数的估计效果,对EKF在常增益条件下的仿真用时与估计结果进行了研究.结果表明,EKF可根据需要求取卡尔曼增益,能在较少计算量下得到较好的估计结果,是一种实用的非线性参数估计方法.     

大气湍流退化图像多帧盲复原

针对图像盲复原时PSF（点扩散函数）尺寸参数对复原效果影响较大,提出一种点扩散函数尺寸自适应估计算法,该算法以均方误差为代价函数,通过遍历搜索点扩散函数有限支持域,克服了点扩散函数尺寸参数选择难的问题。仿真结果表明,估计的点扩散函数尺寸接近真实尺寸,对于大气湍流变化快的情形,改进算法取得了较好的图像复原效果。     

基于压缩感知的信源个数与信号参数估计算法

信源个数与信号参数估计是盲信号处理的关键环节,对后续信号的侦察处理意义重大。针对当前盲信号信源个数与信源参数估计研究割裂的问题,提出了一种联合估计算法。通过分析信号的稀疏系数在不同测量矩阵相同稀疏字典下位置相同的特点,提高了信源个数和信号参数的估计精度,实现算法的自适应控制;通过数理分析确定了多级搜索策略的最优级次,大大降低了稀疏字典的原子数目。仿真结果表明：算法在一定信噪比下能够实现信源个数和信号参数的有效估计;信源个数和信号参数的估计精度随着压缩比的降低而逐渐提高,随着信噪比的提高而逐步增强;噪声对信源个数和信号参数估计精度的影响很大,尤其是低信噪比下;第2个信源载波频率和调频斜率的估计误差明显高于第1个信源参数的估计误差。     

基于非参数统计方法的飞机部件可靠性分析

提出了一种适用于复杂部件的非参数估计方法,采用Kaplan-Meier和Nelson-Aalen估计得出部件在不同时间点的可靠度和失效率,进而计算部件的期望寿命和可靠度的置信区间.最后,通过对计算结果的分析,求出部件进行拆修或报废的时限.经实例验证,该方法在实际应用中是有效的.     

基于性能参数残差序列分析的发动机性能衰退研究

为研究发动机在使用过程中的性能衰退,提出了一种发动机部件性能参数残差序列分析方法。利用发动机模型进行发动机测量参数对部件性能参数的敏感度分析,优化选取充分表征发动机性能衰退的部件性能参数,建立性能参数多元线性回归模型,得到了性能参数的残差序列,通过对残差序列的统计量分析,成功地确定了发动机性能突变时刻,为发动机的维护起到了一定的指导作用。     

基于遗传算法的发动机气路性能模型修正研究

确定部件修正参数和目标性能参数作为模型修正基础,结合稳态模型的平衡方程,构造修正发动机非线性模型的代价函数,修正发动机稳态模型。计算了在不同工况修正后的特性参数,并与用影响系数矩阵方法所得结果进行对比,经遗传算法修正后参数精度有了较大提高。利用部件修正参数组合对发动机稳态模型进行修正,其结果表明敏感性参数在模型修正中起关键作用。所用修正方法对发动机性能模型修正、提高模型精度有一定指导意义。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.