An introduction to the lunar and planetary science activities in Korea

Korea is planning a series of lunar space programs in 2020 starting with a lunar orbiter and a lander with a rover. Compared to other countries, Korea has a relatively brief history in space and planetary sciences. With the expected Korean missions on the near-term horizon and the relatively few Korean planetary scientists, Korea Institute of Geoscience and Mineral Resources (KIGAM) has established a new planetary research group focusing on development of prospective lunar instruments, analysis of the publicly available planetary data of the Moon, organizing nationwide planetary workshops, and initiating planetary educational programs with academic institutions. Korea has also initiated its own rocket development program, which could acquire a rocket-launch capability toward the Korean lunar mission. For the prospective Korea’s lunar science program, feasibility studies for some candidate science payloads have been started since 2010 for an orbiter and a lander. The concept design of each candidate instrument has been accomplished in 2012. It is expected that the development of science payloads may start by 2014 as Phase A. Not only developing hardware required for the lunar mission but also educational activities for young students are high priorities for Korea. The new plan of the Korean lunar mission can be successfully accomplished with international cooperative outreach programs in conjunction with internationally accessible planetary data system (PDS). This paper introduces the KIGAM’s international cooperative planetary research and educational programs and also summarizes other nationwide new developments for Korean lunar research projects at Kyung Hee University and Hanyang University.     

Observation of the lunar topography by the laser altimeter LALT on board Japanese lunar explorer SELENE

The SELENE Laser Altimeter (LALT) is designed to map the Moon’s topography and will be launched in summer 2007. LALT incorporates Q-switched Cr doped Nd:YAG laser (1064 nm) with an output energy of 100 mJ and 1 Hz repetition frequency for about one year mission period. The laser pulse travels to the Moon’s surface and reflections from the surface are detected by a silicon avalanche photo-diode. The ranging distance is 50–150 km with about 5 m accuracy. Several corrections for accurate ranging data are investigated. The flight hardware has been qualified and passed all the integration tests. A principal goal of the LALT instrument is to obtain a much more detailed lunar topographic map which is superior in global coverage, measurement accuracy and number of data points to previous observations and models. The overall science objectives of LALT are (1) determination of lunar global figure, (2) internal structure and surface processes, (3) exploration of the lunar pole regions, and (4) reduction of lunar occultation data.     

Gamma-ray detector on board lunar mission Chang’E-1

Gamma-ray spectrometer (GRS) is included in the payload of Chinese first lunar mission Chang’E-1 that will be launched in 2007. Specific objectives of the GRS are to map abundance of O, Si, Fe, Ti, U, Th, K, and perhaps, Mg, Al, and Ca to depths of about 20 cm. There are remarkable advantages for GRS application to remote sensing elemental materials over the entire lunar surface: large effective area and good ability for background rejection. We will describe the design of GRS and present its performance in this paper. Moreover, the GRS calibration will also be introduced.     

The simulation of lunar gravity field recovery from D-VLBI of Chang’E-1 and SELENE lunar orbiters

The lunar gravity field is a foundation to study the lunar interior structure, and to recover the evolution history of the Moon. It is still an open and key topic for lunar science. For above mentioned reasons, it becomes one of the important scientific objectives of recent lunar missions, such as KAGUYA (SELENE) the Japanese lunar mission and Chang’E-1, the Chinese lunar mission. The Chang’E-1 and the SELENE were successfully launched in 2007. It is estimated that these two missions can fly around the Moon longer than 6 months simultaneously. In these two missions, the Chinese new VLBI (Very Long Baseline Interferometry) network will be applied for precise orbit determination (POD) by using a differential VLBI (D-VLBI) method during the mission period. The same-beam D-VLBI technique will contribute to recover the lunar gravity field together with other conventional observables, i.e. R&RR (Range and Range Rate) and multi-way Doppler. Taking VLBI tracking conditions into consideration and using the GEODYNII/SOVLE software of GSFC/NASA/USA [8 and 10], we simulated the lunar gravity field recovering ability with and without D-VLBI between the Chang’E-1 and SELENE main satellite. The cases of overlapped flying and tracking period of 30 days, 60 days and 90 days have been analyzed, respectively. The results show that D-VLBI tracking between two lunar satellites can improve the gravity field recovery remarkably. The results and methods introduced in this paper will benefit the actual missions.     

Contingency target assessment,trajectory design,and analysis for NASA’s NEA scout solar sail mission

The presented study examines contingency target selection and trajectory design for NASA’s Near-Earth Asteroid Scout mission under the assumption of a missed lunar gravity assist. Two previously considered asteroids are selected as potential targets for the given scenario based on favorable orbital characteristics for launch dates ranging from June 27, 2020 through July 26, 2020. Initially, a simplified circular restricted 3-body problem + ideal solar sail model is utilized to survey trajectory options for a month-long launch window. Selected solutions from this data set are then converged in an N-body ephemeris + non-ideal sail model. Results suggest that NEA Scout can still perform asteroid rendezvous mission under the missed lunar gravity assist scenario with new targets, 2019 GF1, 2018 PK21, and 2007 UN12, based on the target launch dates. Further target assessment is carried out for 165 days beyond the current June 27, 2020 launch date.     

CAS-1 lunar soil simulant

Lunar soil simulant is a geochemical reproduction of lunar regolith, and is needed for lunar science and engineering researches. This paper describes a new lunar soil simulant, CAS-1, prepared by the Chinese Academy of Sciences, to support lunar orbiter, soft-landing mission and sample return missions of China’s Lunar Exploration Program, which is scheduled for 2004–2020. Such simulants should match the samples returned from the Moon, all collected from the lunar regolith rather than outcrops. The average mineral and chemical composition of lunar soil sample returned from the Apollo 14 mission, which landed on the Fra Mauro Formation, is chosen as the model for the CAS-1 simulant. Source material for this simulant was a low-Ti basaltic scoria dated at 1600 years from the late Quaternary volcanic area in the Changbai Mountains of northeast China. The main minerals of this rock are pyroxene, olivine, and minor plagioclase, and about 20–40% modal glass. The scoria was analyzed by XRF and found to be chemically similar to Apollo 14 lunar sample 14163. It was crushed in an impact mill with a resulting median particle size 85.9 μm, similar to Apollo soils. Bulk density, shear resistance, complex permittivity, and reflectance spectra were also similar to Apollo 14 soil. We conclude that CAS-1 is an ideal lunar soil simulant for science and engineering research of future lunar exploration program.     

Preliminary Scientific Results of Chang'E-1 Lunar Orbiter: Based on Payloads Detection Data in the First Phase

Chang'E-1 lunar Orbiter was launched by Long March 3A rocket from Xichang Satel-lite Launch Center at 18:05BT(Beijing Time) Oct.24,2007.It is the first step of its ambitious three-stage moon program,a new milestone in the Chinese space exploration history.The primary science objectives of Chang'E-1 lunar orbiter are to obtain three-Dimension(3D) stereo images of the lunar surface,to analyze the distribution and abundance of elements on the surface,to investigate the thickness of lunar soil,evaluate helium-3 resources and other characteristics,and to detect the space environment around the moon.To achieve the above four mission objectives,eight sets of scientific instruments are chosen as the payloads of the lunar orbiter,including a CCD stereo camera(CCD),a Sagnac-based interferometer spectrometer(ⅡM),a Laser Altimeter(LAM),a Microwave Radiometer(MRM),a Gamma-Ray Spectrometer(GRS),an X-ray spectrometer(XRS),a High-Energy Particle Detector(HPD),and two Solar Wind Ion Detectors(SWID).The detected data of the payloads show that all payloads work well.This paper introduces the status of payloads in the first phase and preliminary scientific results.     

Probing the first stars and black holes in the early Universe with the Dark Ages Radio Explorer (DARE)

A concept for a new space-based cosmology mission called the Dark Ages Radio Explorer (DARE) is presented in this paper. DARE’s science objectives include: (1) When did the first stars form? (2) When did the first accreting black holes form? (3) When did Reionization begin? (4) What surprises does the end of the Dark Ages hold (e.g., Dark Matter decay)? DARE will use the highly-redshifted hyperfine 21-cm transition from neutral hydrogen to track the formation of the first luminous objects by their impact on the intergalactic medium during the end of the Dark Ages and during Cosmic Dawn (redshifts z = 11–35). It will measure the sky-averaged spin temperature of neutral hydrogen at the unexplored epoch 80–420 million years after the Big Bang, providing the first evidence of the earliest stars and galaxies to illuminate the cosmos and testing our models of galaxy formation. DARE’s approach is to measure the expected spectral features in the sky-averaged, redshifted 21-cm signal over a radio bandpass of 40–120 MHz. DARE orbits the Moon for a mission lifetime of 3 years and takes data above the lunar farside, the only location in the inner solar system proven to be free of human-generated radio frequency interference and any significant ionosphere. The science instrument is composed of a low frequency radiometer, including electrically-short, tapered, bi-conical dipole antennas, a receiver, and a digital spectrometer. The smooth frequency response of the antennas and the differential spectral calibration approach using a Markov Chain Monte Carlo technique will be applied to detect the weak cosmic 21-cm signal in the presence of the intense solar system and Galactic foreground emissions.     

Perspectives of auroral X-ray measurements in the 1980s

The measurement of auroral X-rays with balloon-borne instruments is an efficient means to study the behaviour of electrons with energies above about 30 keV in the magnetosphere during disturbed periods. Possibilities will be discussed to continue such measurements in the 1980's. It will be pointed out, what kind of investigations may be performed. Recently developed payloads will be described that can be used as a basis for further technical developments. Satellite projects scheduled for the 1980's will be presented that are suited for coordinated X-ray measurements.     

Chang'E-1 Lunar Mission:An Overview and Primary Science Results

Chang'E-1 is the first lunar mission in China, which was successfully launched on Oct. 24th, 2007. It was guided to crash on the Moon on March 1, 2009, at 52.36oE, 1.50oS, in the north of Mare Fecunditatis. The total mission lasted 495 days, exceeding the designed life-span about four months. 1.37 Terabytes raw data was received from Chang'E-1. It was then processed into 4 Terabytes science data at different levels. A series of science results have been achieved by analyzing and applicating these data, especially "global image of the Moon of China's first lunar exploration mission'. Four scientific goals of Chang'E-1 have been achieved. It provides abundant materials for the research of lunar sciences and cosmochemistry. Meanwhile these results will serve for China's future lunar missions.      

Spectroscopic evaluation of polyurea crosslinked aerogels,as a substitute for RTV-based chromatic calibration targets for spacecraft

Room temperature vulcanizing (RTV)-based components have been used on Mars Pathfinder, the Mars rovers, Spirit and Opportunity, as well as the Phoenix Lander as a support matrix for pigmented panoramic camera calibration targets. RTV 655 has demonstrated superiority to other polymers due to its unique range of material properties namely mechanical stability between −115 and 204 °C and UV radiation tolerance. As a result, it has been the number one choice for many space-related missions. However, due to the high mass density and the natural tendency for electrostatic charging RTV materials have caused complications by attracting and retaining dust particles (Sabri et al., 2008). In the current project we have investigated the relevant properties of polymer-reinforced (crosslinked) silica aerogels with the objective of substituting RTV-based calibration targets with an aerogel based design. The lightweight, mechanical strength, ability to accept color pigments, and extremely low dust capture makes polyurea crosslinked aerogels a strong candidate as a chromatic standard for extraterrestrial missions. For this purpose, the reflection spectra, gravimetric analysis, and low temperature response of metal oxide pigmented, polyurea crosslinked silica aerogels have been investigated and reported here.     

A new window on the cosmos: The Stratospheric Observatory for Infrared Astronomy (SOFIA)

The Stratospheric Observatory for Infrared Astronomy (SOFIA) is a joint US/German Project to develop and operate a gyrostabilized 2.5-m telescope in a Boeing 747-SP. This observatory will allow astronomical observations from 0.3 μm to sub-millimeter wavelengths at stratospheric altitudes as high as 45,000 ft where the atmosphere is not only cloud-free, but largely transparent at infrared wavelengths. The dynamics and chemistry of interstellar matter, and the details of embedded star formation will be key science goals. In addition, SOFIA’s unique portability will enable large-telescope observations at sites required to observe transient phenomena and location specific events. SOFIA will offer the convenient accessibility of a ground-based telescope for servicing, maintenance, and regular technology upgrades, yet will also have many of the performance advantages of a space-based telescope. Initially, SOFIA will fly with nine first-generation focal plane instruments that include broad-band imagers, moderate resolution spectrographs that will resolve broad features from dust and large molecules, and high resolution spectrometers capable of studying the chemistry and detailed kinematics of molecular and atomic gas. First science flights will begin in 2010, leading to a full operations schedule of about 120 8–10 h flights per year by 2014. The next call for instrument development that can respond to scientifically exciting new technologies will be issued in 2010. We describe the SOFIA facility and outline the opportunities for observations by the general scientific community with cutting edge focal plane technology. We summarize the operational characteristics of the first-generation instruments and give specific examples of the types of fundamental scientific studies these instruments are expected to make.     

On the measurements of the moon’s infrared temperature and its relation to the phase angle

Radiometric measurements of the thermal radiation originating from the moon’s surface were obtained using an infrared detector operating at wavelengths between 8 and 14 μm. The measurements cover a full moon cycle. The variation of the moon’s temperature with the lunar phase angle was established. The lunar temperatures were 391 ± 2.0 K for the full moon, 240 ± 3.5 K for the first quarter, and 236 ± 3 K for the last quarter. For the rest of the phase angles, the lunar temperature varied between 170 and 380 K. Our results are comparable with those obtained previously at these phase angles. For the new moon phase, the obtained temperature was between 120 and 133 K. With the exception of the new moon phase, our measurements at all the phase angles were consistent with those obtained using Earth-based data and those obtained by the Diviner experiment and the Clementine spacecraft. At the new phase, our measurements were comparable with those obtained from the ground but were significantly higher than those obtained by the Diviner and Clementine data. We attribute this inconsistency to either the calibration curve of our detector, which does not perform well at very low temperatures, or to infrared emission from the atmosphere. A simple linear model to predict the lunar temperature as a function of the phase angle was proposed. The experimental errors that affect the measured temperatures are discussed.     

The Japanese lunar mission SELENE: Science goals and present status

The Japanese lunar mission SELENE (SELenological and ENgineering Explorer) has been in development to target launch scheduled 2007 summer by H-IIA rocket. The SELENE is starting final integration test after SAR (System Acceptance Review), SRR (System Reliability Review) and instrument environment test. The SELENE is a remote-sensing mission orbiting 100 km altitude of the Moon for nominal one year and extended some months to collect the data for studying the origin and evolution of the Moon. Fourteen instruments and experiment systems are preparing for studies of the Moon, in the Moon, and from the Moon; global element and mineral compositions, topological structure, gravity field of whole moon, and electromagnetic and particle environment of the Moon. The new data center SOAC (SELENE Operation and data Analysis Center) are completed to construct in JAXA Sagamihara campus, and end-to-end test will be carried out between SOAC and data downlink stations.     

The Radio Observatory on the Lunar Surface for Solar studies

The Radio Observatory on the Lunar Surface for Solar studies (ROLSS) is a concept for a near-side low radio frequency imaging interferometric array designed to study particle acceleration at the Sun and in the inner heliosphere. The prime science mission is to image the radio emission generated by Type II and III solar radio burst processes with the aim of determining the sites at and mechanisms by which the radiating particles are accelerated. Specific questions to be addressed include the following: (1) Isolating the sites of electron acceleration responsible for Type II and III solar radio bursts during coronal mass ejections (CMEs); and (2) Determining if and the mechanism(s) by which multiple, successive CMEs produce unusually efficient particle acceleration and intense radio emission. Secondary science goals include constraining the density of the lunar ionosphere by searching for a low radio frequency cutoff to solar radio emission and constraining the low energy electron population in astrophysical sources. Key design requirements on ROLSS include the operational frequency and angular resolution. The electron densities in the solar corona and inner heliosphere are such that the relevant emission occurs at frequencies below 10 MHz. Second, resolving the potential sites of particle acceleration requires an instrument with an angular resolution of at least 2°, equivalent to a linear array size of approximately 1000 m. Operations would consist of data acquisition during the lunar day, with regular data downlinks. No operations would occur during lunar night.     

月球粒子辐射环境探测现状

月球表面没有磁场的保护,粒子辐射是人类在月球活动的重要风险要素。概述了月球的辐射环境以及辐射来源,并介绍了月球探测的现状,特别提及了近年来几个较为典型的月球辐射探测实例及其探测结果;介绍了我国“嫦娥4号”上搭载的月表中子与辐射剂量探测仪（Lunar Lander Neutron&Dosimetry,LND）的科学目标及其技术指标。LND的科学目标主要包括：载人登月辐射剂量的测量、月球南极艾特肯盆地水含量的测量、艾特肯盆地FeO含量的测量,以及为日球层科学的研究提供依据。     

Hard X-ray continuum from lunar surface: Results from High Energy X-ray spectrometer (HEX) onboard Chandrayaan-1

The High Energy X-ray spectrometer (HEX) on Chandrayaan-1 was designed to study the photon emission in the range of 30–270 keV from naturally occurring radioactive decay of ²³⁸U and ²³²Th series nuclides from the lunar surface. The primary objective of HEX was to study the transport of volatiles on the lunar surface using radon as a tracer and mapping the 46.5 keV line from ²¹⁰Pb, a decay product of ²²²Rn. HEX was tested for two days during the commissioning phase of Chandrayaan-1 and performance of all sub systems was found to be as expected. HEX started collecting science data during the first non-prime imaging season (February–April, 2009) of Chandrayaan-1. Certain anomalies persisted in this data set and the early curtailment of Chandrayaan-1 mission in August, 2009, did not allow any further operation of HEX. Despite these issues, HEX provided the first data set for 30–270 keV continuum emission, averaged over a significant portion of the lunar surface, including the polar region.     

Lunar cosmic ray radiation environments during Luna and Lunar Reconnaissance Orbiter missions

The RV-2N-series instruments onboard Luna missions and the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) instrument onboard Lunar Reconnaissance Orbiter (LRO) were designed to characterize the global lunar radiation environment and its biological impacts by measuring cosmic ray (CR) intensity. In this study, we have shown that the RV-2N-series instruments onboard of Russian Luna missions and the CRaTER reliably detect both background CRs and solar proton events (SPEs) in the lunar radiation environment using the proton intensity measured by the RV-2N-series onboard Luna missions out of the Russian Luna program for the exploration of the Moon (November 1970–August 1975) and the CR intensity on the Moon observed by the CRaTER (June 2009–March 2011). Those were compared with the CR intensities observed by neutron monitors (McMurdo, Thule, Oulu) on the Earth. The sunspot number is used as the index of solar activity (NOAA National Geophysical Data Center). As a result, the background CR intensities on the Moon turned out to have a good anti-correlation with the solar activity. We have also identified the proton intensity increasing events on the Moon which have the similar profiles to those observed by neutron monitors on the Earth. Most of these events show the significant increase of proton intensities in the lunar radiation environment when the SPEs associated with solar eruptions are verified. Therefore, most of the proton intensity increasing events are associated with the energetic solar particles in the lunar environment.     

电场的标定方法

介绍了球载双球式电场仪、微火箭电场仪和地面旋转式电场仪等3种仪器的标定方法.电场涉及空间物理、空间环境和雷电及地震等多种自然现象的特征参数,对电场的探测或监测应用日益广泛.在我国目前尚未建立电场的国家标准和军用标准的情况下,通过研制的较简易的电场标定系统,对不同结构的电场仪进行标定,均获得了与理论计算相符的结果,为电场测量数据的可信度提供了依据.      

ASTROSAT

The ASTROSAT satellite is an Indian National Space Observatory under development in India. Due for launch in 2010, ASTROSAT will carry a complement of five scientific instruments enabling simultaneous observations from the optical through to the hard X-ray energy band. This capability will enable broad-band spectroscopy and high time-resolution monitoring of both galactic and extra-galactic targets, such as X-ray binaries and AGN. One of the instruments is being built in collaboration with the Canadian Space Agency and another in collaboration with the University of Leicester. ASTROSAT also carries a scanning sky monitor to observe the variable X-ray sky. After an initial period of science verification and guaranteed time, a certain fraction of ASTROSAT observing time will also be made available to the community via a call for proposals. Here I summarise the instrument complement and principle scientific objectives of the mission.