Development of the heat flow measurement system by the LUNAR-A penetrators

Lunar heat flow experiment is planned by using two LUNAR-A penetrators which will be deployed on the near-side and far-side of the lunar surface in 2000. Each penetrator has seven absolute and eleven relative temperature sensors. Impact experiments for real-size penetrator models onto a lunar-regolith analogue target confirmed that the sensors and electronics used in the Lunar-A Heat Flow Experiment can survive the shock loading expected during penetration of the penetrator in a lunar regolith. The calibration experiment demonstrates that the temperature sensors have a resolution of 0.01 degrees and that the thermal conductivity device have 10 % accuracy. In order to determine the heat flow value, we need a good thermal model and numerical simulation for the penetrator and the regolith which in turn requires accurate measurements of thermal properties of the penetrator's components. The current numerical models indicate that we will be able to obtain the lunar heat flow values within 20 to 30 percents in precision with this method.     

Selenodetic experiments of SELENE: Relay subsatellite,differential VLBI,and laser altimeter

Since 1960s, the gravitational potential of the Moon has been extensively studied from Doppler tracking data between a ground station and spacecraft orbiting in front of the Moon (e. g., Lorell and Sjogren, 1968; Bills and Ferrari, 1980; Konopliv et al., 1993; Lemoine et al., 1997). Because direct radio communication is interrupted while spacecraft is orbiting behind the Moon, however, the coverage of tracking data has been limited mostly to the nearside of the Moon so far. In order to compensate for such lack of tracking data, we propose satellite-to-satellite Doppler measurement by using a relay subsatellite in Japanese mission to the Moon in 2003. A complete coverage of Doppler tracking from an orbiter at sufficiently low altitude will significantly improve lunar gravity model and will contribute for future geophysical study of interior and tectonics on the Moon. Further, we propose differential VLBI experiment between the subsatellite and a propulsion module landed on the surface of the Moon. The differential VLBI is about 10 times more accurate than conventional Doppler measurement for long-wavelength gravity field. Besides, differential VLBI is sensitive to the displacement perpendicular to the line of sight. Thus the VLBI experiment provides precise estimates of the lunar gravity potential at low degree. The last proposal for selenodetic experiments is a laser altimeter. Global topography model has been already developed from the analysis of Clementine LIDAR data (Zuber et al., 1994), but it is suggested that the model includes appreciable anisotropy between NS and E-W directions due to highly eccentric orbit of Clementine spacecraft (Bills and Lemoine, 1995). The laser altimeter experiment from an orbiter in nearly circular orbit will provide a new reference for the isotropic lunar topography model.     

Night side lunar surface potential in the Earth’s magnetosphere

In the Earth’s magnetotail, Japanese Moon orbiter Kaguya repeatedly encountered the plasmoid or plasma sheet. The encounters were characterized by the low energy ion signatures including lobe cold ions, cold ion acceleration in the plasma sheet-lobe boundaries, and hot plasma sheet ions or fast flowing ions associated with plasmoids. Different from the previous observations made in the magnetotail by the GEOTAIL spacecraft, the ions were affected by the existence of the Moon. On the dayside of the Moon, tailward flowing cold ions and their acceleration were observed. However, on the night side, tailward flowing cold ions could not be observed since the Moon blocked them. In stead, ion acceleration by the spacecraft potential and the electron beam accelerated by the potential difference between lunar surface and spacecraft were simultaneously observed. These electron and ion data enabled us to determine the night side lunar surface potential and spacecraft potential only from the observed data for the first time.     

月球仍然活跃的构造、火成和内部特征等证据

月球尽管被作为类地行星演化的最终形态的代表,被认为在25亿年前已经完全冷却,根据阿波罗时 代以来、特别是近十余年的月球轨道器和着陆器获得的关于月球构造、火成活动、月震和内部结构等多种证据,表明月球从深层内部到表面仍然活跃,尚未彻底冷却“死亡”。这将完全改变人们关于月球演化历史和状态的观念。     

Planetary penetrators: Their origins,history and future

Penetrators, which emplace scientific instrumentation by high-speed impact into a planetary surface, have been advocated as an alternative to soft-landers for some four decades. However, such vehicles have yet to fly successfully. This paper reviews in detail, the origins of penetrators in the military arena, and the various planetary penetrator mission concepts that have been proposed, built and flown. From the very limited data available, penetrator developments alone (without delivery to the planet) have required ∼$30M: extensive analytical instrumentation may easily double this. Because the success of emplacement and operation depends inevitably on uncontrollable aspects of the target environment, unattractive failure probabilities for individual vehicles must be tolerated that are higher than the typical ‘3-sigma’ (99.5%) values typical for spacecraft. The two pathways to programmatic success, neither of which are likely in an austere financial environment, are a lucky flight as a ‘piggyback’ mission or technology demonstration, or with a substantial and unprecedented investment to launch a scientific (e.g. seismic) network mission with a large number of vehicles such that a number of terrain-induced failures can be tolerated.     

Autonomous navigation for lunar final approach based on gravity gradient measurements

Lunar final approach navigation is critical for pin-point lunar landing in future missions. This study investigates the use of lunar gravity gradient measurements for autonomous navigation of a lunar probe during the final approach phase. As the spacecraft approaches the Moon, the strength of gravity gradient signals improves. A spaceborne gravity gradiometer can precisely measure local gravity gradients, and the latest lunar gravity model GL1500E is used to provide reference values. The employed truncation degree and order of the gravity model are increased stepwise considering the decreasing altitude of the spacecraft in order to reach a compromise between computational costs and model accuracy. An iterative Kalman filter is developed for coupled orbit and attitude estimation using gravity gradient measurements and attitude quaternions obtained from star sensors. A simulated spacecraft with a gradiometer noise level of 0.01 E is considered. Simulation results show that the spacecraft’s position converges rapidly and achieves an accuracy of less than 100 m at the last epoch.     

基于引力场不对称性的三体系统轨道自主导航

以月球背面的中继通信为背景,提出了基于三体系统引力场不对称特性的星–星测距自主定轨方案。该方案以环月极轨卫星和地–月L2点Halo轨道卫星组成中继通信网,以实现对月球两极和背面的覆盖。通过采集极轨卫星与Halo轨道卫星的测距信息,结合卡尔曼滤波在日–地–月动力学模型下获得两颗卫星的绝对轨道。数值仿真结果表明:本文方法能将导航的位置精度和速度精度分别提高到百米和厘米/秒量级。该自主导航方法还可以扩展到不规则引力场小天体附近星群运动的自主导航。     

“嫦娥4号”中继星任务分析与系统设计

作为"嫦娥4号"任务的重要组成部分,中继星将为着陆器和巡视器提供中继通信支持。不同于其它月球探测器,中继星首次选择了绕地月L2平动点运行的晕(Halo)轨道以保证对月球背面的着陆器和巡视器提供连续的中继通信服务,面临诸多技术挑战。在对中继星任务特点进行分析的基础上,梳理了研制中的技术难题,包括使命轨道的选择、使命轨道的到达和长期维持、中继通信体制选择等,并提出了解决方案。中继星的总体设计方案概述也在文中给出。     

Prospects in the orbital and rotational dynamics of the Moon with the advent of sub-centimeter lunar laser ranging

Lunar laser ranging (LLR) measurements are crucial for advanced exploration of the laws of fundamental gravitational physics and geophysics as well as for future human and robotic missions to the Moon. The corner-cube reflectors (CCR) currently on the Moon require no power and still work perfectly since their installation during the project Apollo era. Current LLR technology allows us to measure distances to the Moon with a precision approaching 1 mm. As NASA pursues the vision of taking humans back to the Moon, new, more precise laser ranging applications will be demanded, including continuous tracking from more sites on Earth, placing new CCR arrays on the Moon, and possibly installing other devices such as transponders, etc. for multiple scientific and technical purposes. Since this effort involves humans in space, then in all situations the accuracy, fidelity, and robustness of the measurements, their adequate interpretation, and any products based on them, are of utmost importance. Successful achievement of this goal strongly demands further significant improvement of the theoretical model of the orbital and rotational dynamics of the Earth–Moon system. This model should inevitably be based on the theory of general relativity, fully incorporate the relevant geophysical processes, lunar librations, tides, and should rely upon the most recent standards and recommendations of the IAU for data analysis. This paper discusses methods and problems in developing such a mathematical model. The model will take into account all the classical and relativistic effects in the orbital and rotational motion of the Moon and Earth at the sub-centimeter level. The model is supposed to be implemented as a part of the computer code underlying NASA Goddard’s orbital analysis and geophysical parameter estimation package GEODYN and the ephemeris package PMOE 2003 of the Purple Mountain Observatory. The new model will allow us to navigate a spacecraft precisely to a location on the Moon. It will also greatly improve our understanding of the structure of the lunar interior and the nature of the physical interaction at the core–mantle interface layer. The new theory and upcoming millimeter LLR will give us the means to perform one of the most precise fundamental tests of general relativity in the solar system.     

The ESA SMART-1 mission to the Moon with solar electric propulsion

SMART-1 is planned to be the first Small Mission for Advanced Research in Technology of the ESA Scientific Programme Horizons 2000 for a launch at the end of 2001. The mission is dedicated to the testing of new technologies for preparing future cornerstone missions, using Solar Electrical Propulsion in Deep Space. The mission operational lifetime includes a 6–17 months cruise until a lunar orbit (300–10000 km) with 6 month operations. The SMART-1 spacecraft will be launched either on Ariane 5 as auxiliary passenger or on Eurockot. The expected launch mass is 350 kg. This allows to bring a dedicated payload with spacecraft, instrument and electric propulsion diagnostics technologies, as well as giving an opportunity for new lunar geophysical and geochemical studies, and for cruise science on the way to the Moon.     

Proposal of application of same beam VLBI measurements in precision orbit determination of lunar orbiter and return capsule and lunar gravity field simulation in Chang’E-3 mission

High accuracy differenced phase delay can be obtained by observing multiple point frequencies of two spacecraft using the same beam Very Long Baseline Interferometry (VLBI) technology. Its contribution in lunar spacecraft precision orbit determination has been performed during the Japanese lunar exploration mission SELENE. In consideration that there will be an orbiter and a return capsule flying around the moon during the Chinese lunar exploration future mission Chang’E-3, the contributions of the same beam VLBI in spacecraft precision orbit determination and lunar gravity field solution have been investigated. Our results show that the accuracy of precision orbit determination can be improved more than one order of magnitude after including the same beam VLBI measurements. There are significant improvements in accuracy of low and medium degree coefficients of lunar gravity field model obtained from combination of two way range and Doppler and the same beam VLBI measurements than the one that only uses two way range and Doppler data, and the accuracy of precision orbit determination can reach meter level.     

The Japanese lunar mission SELENE: Science goals and present status

The Japanese lunar mission SELENE (SELenological and ENgineering Explorer) has been in development to target launch scheduled 2007 summer by H-IIA rocket. The SELENE is starting final integration test after SAR (System Acceptance Review), SRR (System Reliability Review) and instrument environment test. The SELENE is a remote-sensing mission orbiting 100 km altitude of the Moon for nominal one year and extended some months to collect the data for studying the origin and evolution of the Moon. Fourteen instruments and experiment systems are preparing for studies of the Moon, in the Moon, and from the Moon; global element and mineral compositions, topological structure, gravity field of whole moon, and electromagnetic and particle environment of the Moon. The new data center SOAC (SELENE Operation and data Analysis Center) are completed to construct in JAXA Sagamihara campus, and end-to-end test will be carried out between SOAC and data downlink stations.     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

Chang'E-1 Lunar Mission:An Overview and Primary Science Results

Chang'E-1 is the first lunar mission in China, which was successfully launched on Oct. 24th, 2007. It was guided to crash on the Moon on March 1, 2009, at 52.36oE, 1.50oS, in the north of Mare Fecunditatis. The total mission lasted 495 days, exceeding the designed life-span about four months. 1.37 Terabytes raw data was received from Chang'E-1. It was then processed into 4 Terabytes science data at different levels. A series of science results have been achieved by analyzing and applicating these data, especially "global image of the Moon of China's first lunar exploration mission'. Four scientific goals of Chang'E-1 have been achieved. It provides abundant materials for the research of lunar sciences and cosmochemistry. Meanwhile these results will serve for China's future lunar missions.      

近月空间带电粒子环境——“嫦娥1号”“嫦娥2号”观测结果

“嫦娥1号”（CE-1）、“嫦娥2号”（CE-2）都安装了1台太阳高能粒子探测器（High-energetic ParticlesDetectors,HPD）和2台太阳风离子探测器（Solar Wind Ion Detectors,SWIDs）,进行了月球轨道200 km和100 km空间环境探测,获得了月球轨道空间高能带电粒子（质子、电子和重离子）能谱随时间的演化特征、等离子体与月球相互作用特征以及太阳风离子速度、密度和温度参量。空间环境探测数据分析结果表明：太阳活动低年、空间环境扰动水平相对较低、月球处于太阳风中时,近月空间带电粒子环境的基本特征与行星际空间相比变化不大。CE-1、CE-2在轨运行期间,发现了多起0.1～2 MeV能量电子急剧增加事件,这些事件发生在月球从太阳风运动到磁尾的所有空间区域,其中20%的事件伴随着卫星周围等离子体离子加速。模拟和统计研究表明：能量电子急剧增加使得绕月卫星和月球表面电位大幅下降导致了离子加速现象的发生;能量电子总流量大于10¹¹ cm^-2时,绕月卫星和月球表面充电电位可达负的上千伏。此外,月表溅射与反射太阳风离子、太阳风“拾起”离子等空间环境事件的发现,揭示了太阳风离子和月球存在复杂的相互作用过程。     

Surface temperatures at the nearside of the Moon as a record of the radiation budget of Earth’s climate system

Understanding the balance between incoming radiation from the Sun and outgoing radiation from Earth is of critical importance in the study of climate change on Earth. As the only natural satellite of Earth, the Moon is a unique platform for the study of the disk-wide radiation budget of Earth. There are no complications from atmosphere, hydrosphere, or biosphere on the Moon. The nearside of the Moon allows for a focus on the solar radiation during its daytime, and on terrestrial radiation during its nighttime. Additionally, lunar regolith temperature is an amplifier of the terrestrial radiation signal because lunar temperature is proportional to the fourth square root of radiation as such is much more sensitive to the weak terrestrial radiation in nighttime than the strong solar radiation in daytime. Indeed, the long-term lunar surface temperature time series obtained inadvertently by the Heat Flow Experiment at the Apollo 15 landing site three decades ago may be the first important observation from deep space of both incoming and outgoing radiation of the terrestrial climate system. A revisit of the lunar surface temperature time series reveals distinct characteristics in lunar surface daytime and nighttime temperature variations, governed respectively by solar and terrestrial radiation.     

X-ray fluorescence spectrometrywith the SELENE orbiter

X-ray fluorescence spectrometry of the Moon using a CCD-based instrument “XRS” is planned with the SELENE (Selenological and Engineering Explorer) orbiter, which will be launched in 2003. In the Apollo 15 and 16 missions, elemental mapping of Mg, Al and Si has been performed at the lunar equatorial regions for only 9% of the total surface. Much improved datasets will be obtained by using the XRS to map most of major elements, for 90% coverage of the total surface, and within 20 km spatial resolution. Key scientific objectives are (a) to measure the global average of lunar surface composition for investigation of the overall properties of lunar crust, (b) to map the rock-type distribution to study the formation and evolution of the crust and the maria, and to speculate the origin of the dichotomy, (c) to survey the chemical pattern of lava flows, or bottoms of craters or basins, for surveying the vertical structure and composition of the lunar crust and mantle. We describe the XRS instrument.     

中国探月工程

"嫦娥4号"于2019年1月3日成功实现人类航天器首次在月球背面软着陆,"玉兔2号"月球车率先在月背刻上了中国足迹。至今,国际月球探测活动共实施126次,期间出现两个探月高潮。20世纪50—70年代,美苏两个航天大国之间的竞争引起第一轮探月高潮。20世纪末至今,各航天国家意识到月球探测的战略意义,纷纷提出月球探测计划并积极实施,月球成为各国争先探测的热点,掀起第二轮探月热潮。中国自2004年首次绕月探测工程立项实施以来,共开展了"嫦娥1号""嫦娥2号""嫦娥3号""嫦娥4号"及再入返回飞行试验共5次月球探测任务,实现"五战五捷",在空间技术、空间科学与应用、国际合作等方面取得了非凡成就,积累了丰富的经验,后续将继续开展以无人月球科研站为主的月球探测活动。     

The simulation of lunar gravity field recovery from D-VLBI of Chang’E-1 and SELENE lunar orbiters

The lunar gravity field is a foundation to study the lunar interior structure, and to recover the evolution history of the Moon. It is still an open and key topic for lunar science. For above mentioned reasons, it becomes one of the important scientific objectives of recent lunar missions, such as KAGUYA (SELENE) the Japanese lunar mission and Chang’E-1, the Chinese lunar mission. The Chang’E-1 and the SELENE were successfully launched in 2007. It is estimated that these two missions can fly around the Moon longer than 6 months simultaneously. In these two missions, the Chinese new VLBI (Very Long Baseline Interferometry) network will be applied for precise orbit determination (POD) by using a differential VLBI (D-VLBI) method during the mission period. The same-beam D-VLBI technique will contribute to recover the lunar gravity field together with other conventional observables, i.e. R&RR (Range and Range Rate) and multi-way Doppler. Taking VLBI tracking conditions into consideration and using the GEODYNII/SOVLE software of GSFC/NASA/USA [8 and 10], we simulated the lunar gravity field recovering ability with and without D-VLBI between the Chang’E-1 and SELENE main satellite. The cases of overlapped flying and tracking period of 30 days, 60 days and 90 days have been analyzed, respectively. The results show that D-VLBI tracking between two lunar satellites can improve the gravity field recovery remarkably. The results and methods introduced in this paper will benefit the actual missions.     

Next-generation electromagnetic sounding of the Moon

Electromagnetic (EM) sounding of the Moon, largely performed during the Apollo program, provided constraints on core size, mantle composition, and interior temperature. We present new analytical and numerical models that demonstrate the abilities of a next generation of EM sounding to (1) determine the electrical structure of the outermost 500 km and its lateral variability, specifically to understand the extent of upper-mantle discontinuities and the structure of the Procellarum KREEP Terrane; (2) determine the temperature and composition of the lower mantle; and (3) better constrain core size. New EM sounding need not rely on the Apollo methodology, which analyzed the magnetic transfer function between a surface station and a distantly orbiting satellite. Instead, a network of magnetometers (as few as two) can be used, or a complete sounding can be performed from a single station by measuring both electric and magnetic fields. Furthermore, in the magnetotail or lunar wake, sensors can operate from orbit, at altitudes up to the desired investigation depth. The twin-spacecraft ARTEMIS mission will test these methods and a lunar geophysical network will provide definitive results.