共查询到20条相似文献,搜索用时 250 毫秒
1.
永磁容错电机最优转矩控制策略实验 总被引:3,自引:0,他引:3
永磁容错(FTPM)电机不仅具有容错和故障隔离能力,还继承了一般永磁电机功率密度大、转矩脉动小的优点,故在航空用电力作动系统中得到大力发展。最优转矩控制(OTC)算法可以实现电机在正常和故障时(一相断路或短路)输出电磁转矩脉动最小化。本文设计了750 W六相十极FTPM电机最优转矩控制系统平台,提出了两种简单实用的绕组故障诊断方法,对最优转矩控制算法进行了实验研究。实验结果表明,该算法能够实现故障前后转矩转速性能基本不变,且转矩脉动均小于20%,故障时动态响应快。 相似文献
2.
Improving fault tolerant performance of permanent magnet synchronous motor has always been the central issue of the electrically supplied actuator for aerospace application. In this paper, a novel fault tolerant permanent magnet synchronous motor is proposed, which is characterized by two stators and two rotors on the same shaft with a circumferential displacement of mechanical angle of 4.5. It helps to reduce the cogging torque. Each segment of the stator and the rotor can be considered as an 8-pole/10-slot five-phase permanent magnet synchronous motor with concentrated, single-layer and alternate teeth wound winding, which enhance the fault isolation capacity of the motor. Furthermore, the motor has high phase inductance to restrain the short-circuit current. In addition, an improved optimal torque control strategy is proposed to make the motor work well under the open-circuit fault and short-circuit fault conditions. Simulation and experiment results show that the proposed fault tolerant motor system has excellent fault tolerant capacity, which is able to operate continuously under the third open-circuit fault and second shortcircuit fault condition without system performance degradation, which was not available earlier. 相似文献
3.
4.
在一些工业场合,无刷直流电机需要在转子偏心故障的情形下保持运行状态,而传统的控制策略无法有效地实现容错运行。针对这个问题,提出了一种无刷直流电机在转子偏心时的故障容错控制策略。分析了在传统无刷直流电机控制方法中,每相定子电流参考在波形上是一致的,仅存在一定的相位延迟,而没有考虑电机偏心后导致的反电动势和相电感变化,因此电机偏心将导致未知的转矩脉动。新型控制策略在传统控制策略的基础上采用了在线估计方法,获取了相电感和反电动势的值,从而控制器设置定子电流参考时包含了对偏心故障的考虑和相关运算,从而使电机能够降低转矩脉动,具备一定的故障容错运行能力。最后通过对比试验的方法对新型控制策略进行了试验验证。 相似文献
5.
6.
7.
永磁同步电机(PMSM)因其优良的转矩特性和宽广的调速范围而广泛应用于船舶电力推进领域。无位置传感器控制是系统可靠运行的重要保障。然而由于温度变化、磁场饱和效应和磁路交叉耦合作用,电机参数会随运行工况而发生变化,因此实时掌握PMSM运行参数是决定系统控制质量的重要保障。针对以上问题,将模型参考自适应法用于PMSM参数的在线辨识,运用RungeKutta方法建立满秩可调模型,依据Popov超稳定性定理推导出自适应律,最后利用搭建的试验测试平台进行算法的试验验证。仿真和试验结果表明提出的在线参数辨识算法可以准确、实时地辨识出电机参数。 相似文献
8.
《中国航空学报》2023,36(5):465-474
This paper investigates fault tolerant attitude control theory and experiment for under-actuated spacecraft with one reaction wheel completely broken and two others suffering actuator faults of partial loss of effectiveness or bias. A non-smooth robust adaptive fault tolerant control law is proposed under the zero-momentum and input saturation conditions. It shows that the available reaction wheels need to produce sufficient control torque for the fault tolerance. Such a new control method is implemented in a semi-physical simulation system of an air-bearing platform. Experimental results show the effectiveness of the proposed method in spacecraft practical engineering. 相似文献
9.
航天器自适应快速非奇异终端滑模容错控制 总被引:1,自引:2,他引:1
针对存在外部干扰、转动惯量矩阵不确定、控制器饱和以及执行器故障的航天器姿态跟踪控制问题,提出了基于自适应快速非奇异终端滑模的有限时间收敛控制方案。通过引入能够避免奇异点的具有有限时间收敛特性的快速非奇异终端滑模面,设计了满足多约束的有限时间姿态跟踪容错控制器,并利用参数自适应方法使控制器设计不依赖于系统惯量信息和外部干扰的上界。此外,所设计的控制器显式考虑了执行器输出力矩的饱和幅值特性,使航天器在饱和幅值的限制下完成姿态跟踪控制任务,并且无须进行在线故障估计。Lyapunov稳定性分析表明:在外部干扰、转动惯量矩阵不确定、控制器饱和以及执行器故障等约束条件下,所设计的控制器能够保证闭环系统的快速收敛性,而且对控制器饱和与执行器故障具有良好的容错性能。数值仿真校验了该控制器在姿态跟踪控制中的优良性能。 相似文献
10.
With the development of more/all electrical aircraft technology,an electro-mechanical actuator (EMA) is more and more used in an aircraft actuation system.The motor system,as the crucial part of an EMA,usually adopts the redundancy technology or fault tolerance technology to improve the reliability.To compare the performances of these two motor systems,a 10-pole/ 12-slot six-phase permanent magnet synchronous motor (PMSM) is designed with the concentrated single-layer winding,which is able to operate at dual-redundant and fault tolerant modes.Furthermore,the position servo performances of the six-phase PMSM at dual-redundant and fault tolerant modes are analyzed,including the normal and fault conditions.In addition,a variable structure proportional-integral-derivative (PID) control strategy is proposed to solve the performance degradation problem caused by phase current saturation.Simulation and experimental results show that the fault tolerant PMSM has a better position servo performance than the dual-redundant PMSM,and the variable structure PID control strategy is able to improve the performance due to phase current saturation. 相似文献
11.
为了更好地、更高性能地适应航天器多极端工况对伺服系统输出特性的需求变化以及高可靠应用需求,提出了一种新型高可靠电机系统,其主要包括变结构控制器、可变结构驱动拓扑和变结构容错电机。根据系统所需,通过在线变换驱动器与电机绕组的连接方式,重构电机系统结构和参数,进而改变电机系统的输出性能,最终实现每个工况下均能达到航天任务所需性能最优的目的;在驱动器或者电机绕组发生故障时,亦可通过电机系统结构变换,将故障进行隔离并进行容错控制,让剩余的正常部分还能输出所需的扭矩,实现电机系统的带故障运行,保证系统具有故障-工作的高可靠性能力。 相似文献
12.
提出了一种新型结构的6/13极定子模块式轴向磁场磁通切换永磁(AFFSPM)电机。该电机具有结构紧凑、转矩密度大、效率高和容错性能强等特点。分析了AFFSPM电机结构和工作原理,推导了AFFSPM电机的数学模型。利用MATLAB/Simulink仿真软件搭建了AFFSPM电机控制系统仿真模型,分别对滑模速度控制和比例谐振控制的控制策略进行仿真研究,分析对比AFFSPM电机的转速、转矩和三相电流的波形。仿真结果表明,与比例谐振控制策略相比而言,滑模控制策略下该新型AFFSPM电机控制系统具有较好的静态和动态性能。 相似文献
13.
为了提高逆变器并联驱动永磁同步电机(PMSM)系统的运行可靠性,基于对比研究方式设计了两种逆变器并联驱动PMSM的容错控制方案,分别为正常通路电流补偿方案和等效电流补偿方案。两种容错控制方案均不同于传统方案,后者将故障逆变器整体隔离,前者则充分利用了所有逆变器非故障桥臂,以降低故障条件下的铜耗,并输出平稳转矩。此外,两种新型容错控制方案均结合了比例谐振电流控制器以实现对不对称参考电流的跟踪,避免了并联逆变器之间可能出现的环流。最后,通过PMSM并联驱动系统的容错控制试验,验证了新型容错控制策略的效果。 相似文献
14.
15.
16.
为了进一步提高异步电机的控制性能,减小磁链和电流脉动,针对传统异步电机有限控制集模型预测转矩控制(FCSMPTC)中目标代价函数权重因子的配置问题,提出一种模糊在线调整权重因子的异步电机FCSMPTC方法。通过判断转矩和磁链误差,采用TakagiSugeno模糊控制方法实现对权重因子的动态调整,并给出了模糊论域和相应的模糊规则设计。同时考虑到三相异步电机驱动系统中逆变器开关故障给控制系统带来的影响,采用三相六开关容错控制策略对系统进行容错控制。仿真结果表明:该控制方法能够平滑磁链和电流输出,减小电流谐波。 相似文献
17.
18.
19.
提出了一种适用于内置式永磁同步电机(IPMSM)直接转矩控制驱动系统的效率优化方法。基于考虑铁心损耗的IPMSM模型,对电机损耗与运行转速、电磁转矩以及定子磁链三者之间的关系进行了研究分析。根据典型的IPMSM直接转矩控制不使用零电压矢量的特点,对电机功率损耗计算式进行了简化,推导得出在一定运行工况条件下IPMSM的效率最优定子磁链幅值。仿真结果验证了该方法不仅可以保持直接转矩控制动态响应的快速性,而且有效地提高了电机在稳态运行时的效率。 相似文献