Altitude characteristic is of great importance for studying when an air-breathing pulsed laser thruster works in the dense atmosphere condition of 0-30 km altitude. The experimental findings all over the world show that the similar relationship between impulse coupling coefficient and altitude. According to strong explosion theory and an ideal gas model, a dimensionless factor indicating energy law of similitude is introduced, and formula of impulse coupling coefficient is deducted. Then theoretical study of altitude characteristic is carried out and mechanism of altitude characteristic is further explained. The results indicate that there is a maximum value of impulse coupling coefficient if the dimensionless factor equals to 0. 41 in theory, and whether the phenomena of maximum appear or not depends on the range of the dimensionless factor related to altitude. As to a conical nozzle with the fixed length of 120 mm, the relationship between the sonic velocity and the dimensionless factor causes the maximum phenomenon at the altitude of about 12. 5 km, and maximum theoretical impulse coupling coefficient is also found in the experimental investigations. The mechanism of altitude characteristic for air-breathing pulsed laser thruster is discovered in this article, which will provide reference for further research on altitude characteristic. 相似文献
In order to provide the line of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle(UCAV), a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribut ion measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators (VGs) is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate: (1) Compared with the baseline serpentine design without flow control the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion () decreases from 11. 7% to 2.3% by using the VGs. (2) With the descent of the free stream Mach number the total pressure loss decreases. How ever, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. (3) When Ma0=0.6-0.8, α= −4°-8° and β= 0°-6°, the total pressure recovery varies between 0.936 and 0.961, the circular total pressure distortion coefficient varies between 1.4% and 5.4% and the synthesis distortion coefficient has a ranges from 3.8% to 7.0%. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs. 相似文献
This article investigates and presents the influences of geometric parameters of a scramjet exerting upon its nozzle performances. These parameters include divergent angles, total lengths, height ratios, cowl lengths, and cowl angles. The flow field within the scramjet nozzle is simulated numerically by using the CFD software--FLUENT in association with coupled implicit solver and an RNG k-ε turbulence model. 相似文献