Presolar Grains in Meteorites and Their Compositions

Small amounts of pre-solar “stardust” grains have survived in the matrices of primitive meteorites and interplanetary dust particles. These grains—formed directly in the outflows of or from the ejecta of stars—include thermally and chemically refractory carbon materials such as diamond, graphite and silicon carbide; as well as refractory oxides and nitrides. Pre-solar silicates, which have only recently been identified, are the most abundant type except for possibly diamond. The detailed study with modern analytical tools, of isotopic signatures in particular, provides highly accurate and detailed information with regard to stellar nucleosynthesis and grain formation in stellar atmospheres. Important stellar sources are Red Giant (RG) and Asymptotic Giant Branch (AGB) stars, with supernova contributions apparently small. The survival of those grains puts constraints on conditions they were exposed to in the interstellar medium and in the early solar system.     

Deep Impact: The Anticipated Flight Data

A comprehensive observational sequence using the Deep Impact (DI) spacecraft instruments (consisting of cameras with two different focal lengths and an infrared spectrometer) will yield data that will permit characterization of the nucleus and coma of comet Tempel 1, both before and after impact by the DI Impactor. Within the constraints of the mission system, the planned data return has been optimized. A subset of the most valuable data is planned for return in near-real time to ensure that the DI mission success criteria will be met even if the spacecraft should not survive the comet’s closest approach. The remaining prime science data will be played back during the first day after the closest approach. The flight data set will include approach observations spanning the 60 days prior to encounter, pre-impact data to characterize the comet at high resolution just prior to impact, photos from the Impactor as it plunges toward the nucleus surface (including resolutions exceeding 1 m), sub-second time sampling of the impact event itself from the Flyby spacecraft, monitoring of the crater formation process and ejecta outflow for over 10 min after impact, observations of the interior of the fully formed crater at spatial resolutions down to a few meters, and high-phase lookback observations of the nucleus and coma for 60 h after closest approach. An inflight calibration data set to accurately characterize the instruments’ performance is also planned. A ground data processing pipeline is under development at Cornell University that will efficiently convert the raw flight data files into calibrated images and spectral maps as well as produce validated archival data sets for delivery to NASA’s Planetary Data System within 6 months after the Earth receipt for use by researchers world-wide.     

Interior Evolution of Mercury

The interior evolution of Mercury—the innermost planet in the solar system, with its exceptional high density—is poorly known. Our current knowledge of Mercury is based on observations from Mariner 10’s three flybys. That knowledge includes the important discoveries of a weak, active magnetic field and a system of lobate scarps that suggests limited radial contraction of the planet during the last 4 billion years. We review existing models of Mercury’s interior evolution and further present new 2D and 3D convection models that consider both a strongly temperature-dependent viscosity and core cooling. These studies provide a framework for understanding the basic characteristics of the planet’s internal evolution as well as the role of the amount and distribution of radiogenic heat production, mantle viscosity, and sulfur content of the core have had on the history of Mercury’s interior. The existence of a dynamo-generated magnetic field suggests a growing inner core, as model calculations show that a thermally driven dynamo for Mercury is unlikely. Thermal evolution models suggest a range of possible upper limits for the sulfur content in the core. For large sulfur contents the model cores would be entirely fluid. The observation of limited planetary contraction (∼1–2 km)—if confirmed by future missions—may provide a lower limit for the core sulfur content. For smaller sulfur contents, the planetary contraction obtained after the end of the heavy bombardment due to inner core growth is larger than the observed value. Due to the present poor knowledge of various parameters, for example, the mantle rheology, the thermal conductivity of mantle and crust, and the amount and distribution of radiogenic heat production, it is not possible to constrain the core sulfur content nor the present state of the mantle. Therefore, it is difficult to robustly predict whether or not the mantle is conductive or in the convective regime. For instance, in the case of very inefficient planetary cooling—for example, as a consequence of a strong thermal insulation by a low conductivity crust and a stiff Newtonian mantle rheology—the predicted sulfur content can be as low as 1 wt% to match current estimates of planetary contraction, making deep mantle convection likely. Efficient cooling—for example, caused by the growth of a crust strongly in enriched in radiogenic elements—requires more than 6.5 wt% S. These latter models also predict a transition from a convective to a conductive mantle during the planet’s history. Data from future missions to Mercury will aid considerably our understanding of the evolution of its interior.     

An all-sky autonomous star map identification algorithm

The attitude of the spacecraft can be obtained with accuracy by using star sensors. Its key technology is how to identify stellar maps. Triangle algorithm is used most widely in the current star map identification algorithms. In the field of physical geography modelling, Delaunay triangulation cutting algorithm has been widely used because of its important characteristic; the result of this triangulation cutting method is unique from a random set of points. This triangulation algorithm is first applied to identify star map for its particular character. In final, the proposed method is applied to simulation; the results show that compared with the current star map identification algorithms, the algorithm presented in this paper has the advantage of real-time properties and robustness. It needs a smaller database of guidance stars and matches more rapidly.     

Photographic tracking of artificial satellites

A review of the development of photographic tracking techniques in different countries during the recent 5–6 yr is given. Main results of scientific investigations based on observations with Baker-Nunn cameras are considered. New large Soviet, English, French, German cameras are described. Important international projects on photographic tracking for satellite geodesy are reviewed. Main directions of research in this domain are discussed.     

Space Weather Research in China

Recent progress in space weather research are briefly presented here from three aspects: establishment or improvement in observation systems, such as extra-soft X-ray detector and γ-ray detector onboard the spacecraft ‘Shen Zhou 2’, new solar radio broad-band spectrometer, magnetometer-chain, ionosonde and digisonde–chain, laser-lidar system and VHF radar; partial topic progresses included in CMEs, multi-streamer structures, evolution of interplanetary magnetic field B _z component, regional properties of traveling ionospheric disturbances, a fully-nonlinear global dynamical model for the middle and upper atmosphere, and a combined prediction method for geomagnetic disturbances; and space weather activity, such as ‘Meridian Project’ — a national major scientific project, ‘International Space Weather Meridian Circle Program’ — a suggestion of internationalization of ‘Meridian Project’, ‘Space Weather Research Plan’ — a major research plan from National Natural Science Foundation of China (NNSFC) and other space weather activities. This revised version was published online in August 2006 with corrections to the Cover Date.     

Organic Chemistry and Exobiology on Titan

Exobiology is not only the study of the origin, distribution and evolution of life in the universe, but also of structures — including at the molecular level, and processes — including organic chemical transformations — related to life. In that respect, with its dense nitrogen atmosphere, which includes a noticeable fraction of methane, and the many organic compounds which are present in the gas and aerosols phases, Titan appears to be a planetary object of prime interest for exobiology in the Solar system, allowing the study of chemical organic evolution in a planetary environment over a long time scale. We describe here some aspects of this extraterrestrial organic chemistry which involves many physical and chemical couplings in the different parts of what can be called ‘Titan's geofluid’ (gas phase, aerosol phases and surface solid and maybe liquid phases). The three complementary approaches which can be followed to study such chemistry of exobiological interest are considered. Those are experimental simulations in the laboratory, chemical and photochemical modeling and of course observation, using both remote sensing and in situ measurements, which is an essential approach. The Cassini-Huygens mission, that offers a unique opportunity to study in detail the many aspects of Titan's organic chemistry, is discussed and the many expected exobiological returns from the different instruments of the Cassini orbiter and the Huygens probe are considered. This revised version was published online in August 2006 with corrections to the Cover Date.     

Deep and Shallow Solid-Earth Structures Reconstructed with Sequential Integrated Inversion (SII) of Seismic and Gravity Data

In this paper, the possibility of using simultaneously seismic and gravity data, for the reconstruction of solid-Earth structures, has been investigated through the use of an algorithm which allows joint efficient and reliable optimisation of compressional velocity and mass density parameters. We view the measured data as a realisation of a stochastic process generated by the physical parameters to be sought and we construct a “probability density function” which includes three kinds of information: information derived from gravity measurements; information derived from seismic travel time inversion and information on the physical correlation among density and velocity parameters. We show that combining data has a beneficial effect on the inversion since: it makes the problem more stable and as a consequence, providing that the quality of data is sufficiently high, enables more accurate and reliable reconstruction of the unknown parameters. In this context, we look forward the GOCE mission, which promises high spatial resolution (100–200 km) and accurate (1–2 mGals) gravity data. We show results obtained from data sets calculated for a lateral inhomogeneous earth synthetic model and from seismic and gravity field data analysed: — in the framework of TOMOVES (TOMOgraphy of Mt. VESuvius) experiment, an European project aiming at reconstructing the 3-D image of Mt. Vesuvius volcano and the crust underneath. using high resolution seismic tomography techniques and other geophysical methods; — for a profile inserted in a project aiming at reconstructing the crustal structure between Corsica and the Northern Appennines which crosses the Ligurian Sea and cuts the Ligurian Appennines W of La Spezia, extending up to Parma. This revised version was published online in August 2006 with corrections to the Cover Date.     

Stellar chromospheres

Observations indicating the presence of stellar chromospheres, that is hot envelopes around stars are summarized. Undisputed indicators (called type I) for hot stellar envelopes are spectral lines of highly ionized atoms, Fe ii emission lines and flares in late type stars and the presence of the He i10830 Å line. Whether indicators (called type II) like emission cores in the Ca ii H and K and Mg ii h and k lines or mass loss signify the presence of stellar chromospheres is still somewhat debated, although the discussion points in favour of the usefulness of these indicators. The combined evidence to date shows that all non degenerate type stars have chromospheres except possibly the A stars. There are however theoretical reasons for expecting chromospheres in A stars. Empirical chromosphere models for a rapidly growing sample of stars have recently been constructed on the basis of Ca ii and Mg ii line observations. A discussion of possible heating mechanisms is given and the relative importance of these mechanisms is evaluated. For the low and middle chromosphere the short period acoustic heating mechanism seems to be the dominant process although there are still uncertainties. Both steady state and time dependent theoretical models of stellar chromospheres, based on the short period acoustic heating theory, are discussed, and predictions of these models are compared with results from empirical models. This relatively favourable comparison shows that the explanation of the Wilson-Bappu effect might be at hand.     

Structure of the Solar Wind and Compositional Variations

The composition of the solar wind is largely determined by the composition of the source material, i.e. the present-day composition of the outer convective zone. It is then modified by the processes which operate in the transition region and in the inner corona. In situ measurements of the solar wind composition give a unique opportunity to obtain information on the isotopic and elemental composition of the Sun. However, elemental — and to some degree also isotopic — fractionation can occur in the flow of matter from the outer convective zone into the interplanetary space. The most important examples of elemental fractionation are the well-known FIP/FIT effect (First Ionization Potential/Time) and the sometimes dramatic variations of the helium abundance relative to hydrogen in the solar wind. A thorough investigation of fractionation processes which cause compositional variations in different solar wind regimes is necessary to make inferences about the solar source composition from solar wind observations. Our understanding of these processes is presently improving thanks to the detailed diagnostics offered by the optical instrumentation on SOHO. Correlated observations of particle instruments on Ulysses, WIND, and SOHO, together with optical observations will help to make inferences for the solar composition. Continuous in situ observations of several isotopic species with the particle instruments on WIND and SOHO are currently incorporated into an experimental database to infer isotopic fractionation processes which operate in different solar wind regimes between the solar surface and the interplanetary medium. Except for the relatively minor effects of secular gravitational sedimentation which works at the boundary between the outer convective zone and the radiative zone, refractory elements such as Mg can be used as faithful witnesses to monitor the magnitude of these processes. With theoretical considerations it is possible to make inferences about the importance of isotopic fractionation in the solar wind from a comparison of optical and in situ observations of elemental fractionation with the corresponding models. Theoretical models and preliminary results from particle observations indicate that the combined isotope effects do not exceed a few percent per mass unit. In the worst case, which concerns the astrophysically important 3He/4He ratio, we expect an overall effect of at most several percent in the sense of a systematic depletion of the heavier isotope. Continued observations with WIND, SOHO, and ACE, and, with the revival of the foil technique, with the upcoming Genesis mission will further consolidate our knowledge about the relation between solar wind dynamics and solar wind composition. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Deep Impact Earth-Based Campaign

Prior to the selection of the comet 9P/Tempel 1 as the Deep Impact mission target, the comet was not well observed. From 1999 through the present there has been an intensive world-wide observing campaign designed to obtain mission critical information about the target nucleus, including the nucleus size, albedo, rotation rate, rotation state, phase function, and the development of the dust and gas coma. The specific observing schemes used to obtain this information and the resources needed are presented here. The Deep Impact mission is unique in that part of the mission observations will rely on an Earth-based (ground and orbital) suite of complementary observations of the comet just prior to impact and in the weeks following. While the impact should result in new cometary activity, the actual physical outcome is uncertain, and the Earth-based observations must allow for a wide range of post-impact phenomena. A world-wide coordinated effort for these observations is described.     

Origin and Evolution of the Light Nuclides

After a short historical (and highly subjective) introduction to the field, I discuss our current understanding of the origin and evolution of the light nuclides D, ³He, ⁴He, ⁶Li, ⁷Li, ⁹Be, ¹⁰B and ¹¹B. Despite considerable observational and theoretical progress, important uncertainties still persist for each and every one of those nuclides. The present-day abundance of D in the local interstellar medium is currently uncertain, making it difficult to infer the recent chemical evolution of the solar neighborhood. To account for the observed quasi-constancy of ³He abundance from the Big Bang to our days, the stellar production of that nuclide must be negligible; however, the scarce observations of its abundance in planetary nebulae seem to contradict this idea. The observed Be and B evolution as primaries suggests that the source composition of cosmic rays has remained ∼constant since the early days of the Galaxy, a suggestion with far reaching implications for the origin of cosmic rays; however, the main idea proposed to account for that constancy, namely that superbubbles are at the source of cosmic rays, encounters some serious difficulties. The best explanation for the mismatch between primordial Li and the observed “Spite-plateau” in halo stars appears to be depletion of Li in stellar envelopes, by some yet poorly understood mechanism. But this explanation impacts on the level of the recently discovered early “⁶Li plateau”, which (if confirmed), seriously challenges current ideas of cosmic ray nucleosynthesis.     

The Strength and Structure of the Coronal Magnetic Field

I discuss a method for determining the strength and spatial structure of the coronal magnetic field by observations of the Faraday rotation of a radio galaxy which is in conjunction with the Sun. Given a knowledge of the plasma density in the outer corona, and the magnetic field sector structure (both independently available), the strength of the coronal field can be determined, as well as the magnitude of spatial variations on scales of 1000 km to several solar radii. Such knowledge is crucial for testing computational models of the solar corona, which are prominently featured in this meeting. Results are presented from observations with the Very Large Array radio telescope of the radio galaxy 3C228 on August 16, 2003, when the line of sight to the source was at heliocentic distances of 7.1−6.2R _⊙. The observations are consistent with a coronal magnetic field which is proportional to the inverse square of the distance in the range 6 ≤ r ≤ 10R _⊙, and has a value of 39 mG at 6.2R _⊙. The Faraday rotation is uniform across the source, indicating an absence of strong plasma inhomogeneity on spatial scales up to 35,000 km.     

The Milky Way 3-Helium Abundance

We are making precise determinations of the abundance of the light isotope of helium, ³He. The ³He abundance in Milky Way sources impacts stellar evolution, chemical evolution, and cosmology. The abundance of ³He is derived from measurements of the hyperfine transition of ³He⁺ which has a rest wavelength of 3.46 cm (8.665 GHz). As with all the light elements, the present interstellar ³He abundance results from a combination of Big Bang Nucleosynthesis (BBNS) and stellar nucleosynthesis. We are measuring the ³He abundance in Milky Way H ii regions and planetary nebulae (PNe). The source sample is currently comprised of 60 H ii regions and 12 PNe. H ii regions are examples of zero-age objects that are young relative to the age of the Galaxy. Therefore their abundances chronicle the results of billions of years of Galactic chemical evolution. PNe probe material that has been ejected from low-mass (M≤ 2M _⊙) to intermediate-mass (M∼2–5M _⊙) stars to be further processed by future stellar generations. Because the Milky Way ISM is optically thin at centimeter wavelengths, our source sample probes a larger volume of the Galactic disk than does any other light element tracer of Galactic chemical evolution. The sources in our sample possess a wide range of physical properties (including object type, size, temperature, excitation, etc.). The ³He abundances we derive have led to what has been called “The ³He Problem”.     

Surface-Exosphere-Magnetosphere System Of Mercury

Mercury is a poorly known planet, since the only space-based information comes from the three fly-bys performed in 1974 by the Mariner 10 spacecraft. Ground-based observations also provided some interesting results, but they are particularly difficult to obtain due to the planet’s proximity to the Sun. Nevertheless, the fact that the planet’s orbit is so close to the Sun makes Mercury a particularly interesting subject for extreme environmental conditions. Among a number of crucial scientific topics to be addressed, Mercury’s exosphere, its interaction with the solar wind and its origin from the surface of the planet, can provide important clues about planetary evolution. In fact, the Hermean exosphere is continuously eroded and refilled by these interactions, so that it would be more proper to consider the Hermean environment as a single, unified system – surface-exosphere-magnetosphere. These three parts are indeed strongly linked to each other. In recent years, the two missions scheduled to explore the iron planet, the NASA MESSENGER mission (launched in March 2004) and the ESA cornerstone mission (jointly with JAXA) BepiColombo (to be launched in 2012), have stimulated new interest in the many unresolved mysteries related to it. New ground-based observations, made possible by new technologies, have been obtained, and new simulation studies have been performed. In this paper some old as well as the very latest observations and studies related to the surface-exosphere-magnetosphere system are reviewed, outlining the investigations achievable by the planned space-based observations. This review intends to support the studies, in preparation of future data, and the definition of specific instrumentation.     

Global Properties of Solar Flares

This article broadly reviews our knowledge of solar flares. There is a particular focus on their global properties, as opposed to the microphysics such as that needed for magnetic reconnection or particle acceleration as such. Indeed solar flares will always remain in the domain of remote sensing, so we cannot observe the microscales directly and must understand the basic physics entirely via the global properties plus theoretical inference. The global observables include the general energetics—radiation in flares and mass loss in coronal mass ejections (CMEs)—and the formation of different kinds of ejection and global wave disturbance: the type II radio-burst exciter, the Moreton wave, the EIT “wave”, and the “sunquake” acoustic waves in the solar interior. Flare radiation and CME kinetic energy can have comparable magnitudes, of order 10³² erg each for an X-class event, with the bulk of the radiant energy in the visible-UV continuum. We argue that the impulsive phase of the flare dominates the energetics of all of these manifestations, and also point out that energy and momentum in this phase largely reside in the electromagnetic field, not in the observable plasma.     

Prospects for space stellar astrometry

Astrometry is the major astronomical technique to measure distances, masses and motions of stars. Dividing astrometric techniques into five types according to the size of the field in which a single instrument can produce measurements, the present achievements of the Earth-based astrometry are described. The astrometric activities such as measurements of star diameters, double star relative positioning or stellar parallaxes, search for invisible companions, photographic plate reduction, visual and photoelectric meridian and astrolable astrometry are reviewed. Then, the methods used to construct a quasi-inertial celestial reference frame and to materialize it by a fundamental catalogue are presented and discussed. A much better definition of an absolute reference frame is made possible by VLBI, but the problem of extending it to stellar positions is not yet satisfactorily resolved.The limitations of the ground based astrometry are: the atmospheric turbulence and refraction, Earth's motions and the impossibility to view the entire sky with a single instrument. These limitations are discussed and it is shown how astrometry from space can overcome them. A priori, a gain of two orders of magnitudes in accuracy for all types of astrometry is expected, but at this new level of precision, new effects and limitations will appear, as already shown in the studies of the approved programs.Then, the ESA astrometric satellite HIPPARCOS presently under development is presented. The satellite and the payload are described as well as the observing procedures. Several limitations, specific to space borne instrumentation and to the milliarc second accuracy expected have been identified. However the main limitation in precision remains the photon noise. The data reduction methods are sketched. The data downlinked at a rate of 20 kilobits per second have to be used with an equal weight all over the 21/2 years of observation. They are expected to yield a mean accuracy of 2 milliarc seconds in position and parallax and 2 m.a.s. per year in proper motion for most of the 100000 stars of the program (M _b < 9). Stars to be observed by HIPPARCOS have to be carefully selected. The main fields in which the results of HIPPARCOS will be used are listed from the proposals made by the scientific community. The task of constructing the HIPPARCOS input catalogue from these proposals is presented.Another feature of the ESA astrometric satellite is the use of the HIPPARCOS star-mapper as a photometric and position survey of the sky. This experiment, called TYCHO, should give at least 400000 star positions with accuracies of the order of 0.03 to 0.15 depending upon the magnitudes. Two colour instantaneous magnitudes should also be obtained to 0.1–0.4 mag. precision.Several Space-Telescope on-board instruments are also capable to make small field astrometric observations. Accurate imaging is possible with the Wide Field and the Faint Object cameras. Lunar occultations will be performed with the High Speed photometer. But the main astrometric mode of the Space Telescope will be the use of the Fine Guidance Sensors to measure the relative positions of stars to ±0.002. It is described together with its main scientific applications.The establishment of an absolute reference frame is subsequently discussed. Plans using simultaneously VLBI, HIPPARCOS, and Space Telescope observations are described. They consist in linking the HIPPARCOS stellar system to quasars via radio-stars or stars in the vicinity of optical quasars.Finally, several space astrometry proposals are described: long focus space astrometry and two versions of space interferometry.     

Mercury’s Surface Composition and Character as Measured by Ground-Based Observations

Mercury’s surface is thought to be covered with highly space-weathered silicate material. The regolith is composed of material accumulated during the time of planetary formation, and subsequently from comets, meteorites, and the Sun. Ground-based observations indicate a heterogeneous surface composition with SiO₂ content ranging from 39 to 57 wt%. Visible and near-infrared spectra, multi-spectral imaging, and modeling indicate expanses of feldspathic, well-comminuted surface with some smooth regions that are likely to be magmatic in origin with many widely distributed crystalline impact ejecta rays and blocky deposits. Pyroxene spectral signatures have been recorded at four locations. Although highly space weathered, there is little evidence for the conversion of FeO to nanophase metallic iron particles (npFe⁰), or “iron blebs,” as at the Moon. Near- and mid-infrared spectroscopy indicate clino- and ortho-pyroxene are present at different locations. There is some evidence for no- or low-iron alkali basalts and feldspathoids. All evidence, including microwave studies, point to a low iron and low titanium surface. There may be a link between the surface and the exosphere that may be diagnostic of the true crustal composition of Mercury. A structural global dichotomy exists with a huge basin on the side not imaged by Mariner 10. This paper briefly describes the implications for this dichotomy on the magnetic field and the 3 : 2 spin : orbit coupling. All other points made above are detailed here with an account of the observations, the analysis of the observations, and theoretical modeling, where appropriate, that supports the stated conclusions.     

Element Settling in the Solar Interior

Element settling inside the Sun now becomes detectable from the comparison of the observed oscillation modes with the results of the theoretical models. This settling is due, not only to gravitation, but also to thermal diffusion and radiative acceleration (although this last effect is small compared to the two others). It leads to abundance variations of helium and heavy elements of ≅ 10% below the convective zone. Although not observable from spectroscopy, such variations lead to non-negligible modifications of the solar internal structure and evolution. Helioseismology is a powerful tool to detect such effects, and its positive results represent a great success for the theory of stellar evolution. Meanwhile, evidences are obtained that the element settling is slightly smoothed down, probably due to mild macroscopic motions below the convective zone. Additional observations of the abundances of both 7Li and 3He lead to specific constraints on these particular motions. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Cosmic Ray Nucleonic Component: The Invention and Scientific Uses of the Neutron Monitor – (Keynote Lecture)

The invention of the neutron monitor pile for the study of cosmic-ray intensity-time and energy changes began with the discovery in 1948 that the nucleonic component cascade in the atmosphere had a huge geomagnetic latitude dependence. For example, between 0° and 60° this dependence was a ∼ 200–400% effect – depending on altitude – thus opening the opportunity to measure the intensity changes in the arriving cosmic-ray nuclei down to ∼1–2 GeV nucl⁻¹ for the first time. In these measurements the fast (high energy) neutron intensity was shown to be a surrogate for the nuclear cascade intensity in the atmosphere. The development of the neutron monitor in 1948–1951 and the first geomagnetic latitude network will be discussed. Among its early applications were: (1) to prove that there exists interplanetary solar modulation of galactic cosmic-rays (1952), and; (2) to provide the evidence for a dynamical heliosphere (1956). With the world-wide distribution of neutron monitor stations that are presently operating (∼ 50) many novel investigations are still to be carried out, especially in collaborations with spacecraft experiments. This revised version was published online in August 2006 with corrections to the Cover Date.