共查询到20条相似文献,搜索用时 515 毫秒
1.
2.
3.
微小卫星基于成本和重量的考虑使用了大量COTS(commercial off-the-shelf,商用货架产品)器件。总剂量效应是制约COTS器件航天应用的主要因素之一。为了更加准确地计算COTS器件的辐射剂量,避免过设计,采用Pro/E二次开发技术自主开发了三维总剂量分析软件。与商业软件Space Radiation在简单模型上进行了对比验证,结果表明自研软件计算结果可信。采用自研软件对在研的型号开展三维总剂量分析,降低了对总剂量敏感器件的抗总剂量要求,减小了屏蔽厚度。 相似文献
4.
5.
6.
随着微电子、微机械和新材料等技术的飞速发展以及空间任务对高性能、低成本、短研制周期需求的日益增强,现有宇航级技术和产品逐渐无法适应上述变化,使得在空间任务中发展与应用商用现货(COTS)技术成为可能。美国、日本、欧洲等航天发达国家和地区率先开展了COTS技术研究与应用实践,积累了丰富经验,值得其他航天国家学习与借鉴。 相似文献
7.
商用现货器件在卫星中的应用 总被引:1,自引:0,他引:1
在卫星设计过程中,采用商用现货(COTS)电子器件替代传统卫星研制中昂贵的高等级产品来降低研制成本是行之有效的方法。文章总结了商用现货器件在卫星中应用时所面临的空间环境干扰,并针对单粒子翻转问题提出冗余设计和特定电路设计等策略。对当前国内外卫星中采用的各种COTS器件设计方法进行了论述,分析了各种提高商用现货器件可靠度方法的优缺点,并结合已经发射的BIRD、ARGOS等卫星和正在研制的容错结构,综述了COTS器件在卫星中的应用,分析了COTS器件的作用和使用方法。文章内容可为工程实践提供一定的参考。 相似文献
8.
9.
我国商业航天的发展及标准化工作探索 总被引:1,自引:0,他引:1
《航天标准化》2021,(1)
在国家政策的鼓励下,商业航天迎来发展潮,在短短5年时间内,我国涌现出一批卫星制造、运营与服务,商业测控、运载火箭等新兴民营企业,成为经济增长新热点。标准化工作作为一项基础性工作,在关键技术和产品研制过程以及产业应用中,都发挥着关键性作用。文章分析了商业航天与传统航天在产业和标准上的差异,围绕着支撑商业航天产业链的健康发展,分析了国内外本领域的标准化现状,规划构建商业航天标准体系以及组建配套的标准化工作组织机构,为开展商业航天标准化工作进行了积极的探索。 相似文献
10.
针对低地球轨道(LEO)卫星对全球卫星定位系统(GPS)卫星的掩星观测任务,在考虑LEO和GPS卫星几何关系及掩星观测天线视场的条件下,建立轨道模拟系统,对全球和区域内的掩星事件进行了模拟。对单颗卫星,用分离变量法讨论了卫星轨道参数对掩星事件数量和时空分辨率的影响,比较了大气层与电离层掩星事件的差别,并根据分析结果用混... 相似文献
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
14.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
15.
16.
17.
18.
金属网由于柔韧性好、使用方便等优势而在电缆屏蔽工程上得到广泛应用。本文对电缆用的金属网屏蔽效能进行工程计算,通过计算,对金属网不同材料、不同规格、单层与双层屏蔽及有缝隙情况下的屏蔽效能进行比较与分析,对工程应用有一定的指导意义。 相似文献
19.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
20.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献