Suborbital and low-thermospheric experiments using sounding rockets in Taiwan

The suborbital flight is a kind of flight, which reaches the space and then comes back to ground without completing one orbital revolution. The atmospheric thermosphere extends from 85 km to 600 km in altitude. Therefore, the suborbital and low-thermospheric experiments to be performed at altitude below 300 km can be combined using the sounding rocket. These experiments include rocket staging, fairing separation, ultrasonic flight, reentry, aerobrake and recovery test, ultraviolet and ionization observations, ozone measurement, etc. The advent of Taiwan's sub-orbital and thermospheric experiments project can be traced back to 1997. This is the year Taiwan's National Space Organization (NSPO) was assigned to be responsible for procuring the sounding rocket for applications in science experiments and space technology research effort. From 1997 to 2010, 8 launches have been completed including one experimental hybrid rocket. All onboard instruments and sensors for sub-orbital and low-thermospheric experiments are developed and integrated by the domestic universities. More launches have been planned in the future. Opportunities for international cooperation in developing new instruments and payloads for future experiments will be possible.     

Tethers and debris mitigation

In recent years, the use of tethers has been proposed for reduction of space debris either through momentum transfer or use of electrodynamic effects. Tethers have been shown to at least theoretically allow for quick, elegant and cost-effective deorbit of defunct satellites or spent stages. On the other hand, the large risk that tethers themselves may pose to other satellites in orbit has been recognized as well. The large collision area of tethers, combined with operational hazards and meteoroid risk may result in a large orbital exposure. For example, in 1997, the ESA/Dutch 35-km tether deployment of YES from TEAMSAT was inhibited after an analysis of the collision risk for the case the tether operation would fail. The question rises how these two points of view compare to eachother. This paper intends to highlight a representative selection of the proposed tether applications while taking into account the added risks caused by the tethers themselves.Typical applications from recent literature will be briefly described, such as an Ariane 502 spent stage re-entry from GTO and the concept of deboost of defunct satellites by interaction of a conductive tether with the Earth magnetic field.Mass savings of the tethered sytems versus conventional equivalents will be evaluated.Based on a crude risk analysis, involving elements such as mission complexity, dynamic stability, meteoroid risk and orbital life time, a general outline of limiting factors can be given for the various applications. Special attention is reserved for implementation of mechanisms that help reduce this tether risk, such as the DUtether (Tether Degradable by Ultraviolet), utilization of airdrag and solar pressure, the effect of residual current in bare tethers, tether retrieval etc.It is proposed how a net tether-induced mitigation can be compared to that of conventional alternatives, i.e. deboost by rocket engine or a completely passive approach.This comparison is put in the perspective of an ever-increasing occupation of the space environment.It is concluded that tethers can in fact help mitigate the debris risk and that for each application a useful niche can be defined. It is argued that eliminating pollution directly after use of the precious resource of space is not only good custom, but also an important way to make the risk of debris controllable and independent of future trends. Although tethers may have large exposure in terms of area-time product, they deliver a quick cleaning service that may be appreciated by the future users of space.     

Experiments and numerical simulations of an electrodynamic tether deployment from a spool-type reel using thrusters

The amount of space debris is ever increasing, and pollution of the space environment has become a serious problem that can no longer be ignored. Consequently, the active removal of large space debris from crowded economically useful orbits should begin as soon as possible. The Japan Aerospace Exploration Agency has been investigating an active debris removal system that employs highly efficient electrodynamic tether (EDT) technology for orbital transfer. This study investigates the tether deployment from a spool-type reel using thrusters by means of numerical simulations of an EDT system. The thrusters are used in order to ensure the deployment of a tether with the length of several kilometers. In the simulations using a multiple mass tether model, the key parameters are estimated from various on-ground experiments. By means of the numerical simulations, the dynamics of tether deployment is studied and requirements of thruster needed for the deployment, such as the thrust forces and the periods of thruster activation, are clarified.     

Benefits and risks of using electrodynamic tethers to de-orbit spacecraft

By using electrodynamic drag to greatly increase the orbital decay rate, an electrodynamic space tether can remove spent or dysfunctional spacecraft from low Earth orbit (LEO) rapidly and safely. Moreover, the low mass requirements of such tether devices make them highly advantageous compared to conventional rocket-based de-orbit systems. However, a tether system is much more vulnerable to space debris impacts than a typical spacecraft and its design must be proved to be safe up to a certain confidence level before being adopted for potential applications. To assess space debris related concerns, in March 2001 a new task (Action Item 19.1) on the “Potential Benefits and Risks of Using Electrodynamic Tethers for End-of-life De-orbit of LEO Spacecraft” was defined by the Inter-Agency Space Debris Coordination Committee (IADC). Two tests were proposed to compute the fatal impact rate of meteoroids and orbital debris on space tethers in circular orbits, at different altitudes and inclinations, as a function of the tether diameter to assess the survival probability of an electrodynamic tether system during typical de-orbiting missions. IADC members from three agencies, the Italian Space Agency (ASI), the Japan Aerospace Exploration Agency (JAXA) and the US National Aeronautics and Space Administration (NASA), participated in the study and different computational approaches were specifically developed within the framework of the IADC task. This paper summarizes the content of the IADC AI 19.1 Final Report. In particular, it introduces the potential benefits and risks of using tethers in space, it describes the assumptions made in the study plan, it compares and discusses the results obtained by ASI, JAXA and NASA for the two tests proposed. Some general conclusions and recommendations are finally extrapolated from this massive and intensive piece of research.     

Deorbiting with electrodynamic tethers: comparison between different tether configurations

Electrodynamic tethers have been recently proposed for satellite and rocket upper stage deorbiting to mitigate the debris problem at Low Earth Orbits (LEOs). The deorbiting performance of several electrodynamic tethers, where the electron collection from the ionosphere is obtained with either simple bare wires or bare wires terminated with conducting spherical collectors, was analyzed and compared. Our results indicate that the use of the spherical collectors at the positive termination of the system significantly enhances the deorbiting capabilities of the electrodynamic bare tethers.     

Long-term biological investigations in space

Missions in space within the next two decades will be of longer duration than those carried out up to the present time, and the effects of such long-term flights on biological organisms are unknown. Results of biological experiments that have been performed to date cannot be extrapolated to results in future flights because of the unknown influence of adaptation over a long period of time. Prior experiments with Axolotl, fishes, and vertebrates by our research team (in part with sounding rockets) showed that these specimens did not appear to be suitable for long-term missions on which minimization of expense, technique, and energy is required. Subsequent investigations have shown the suitability of the leech (Hirudo medicinalis), which consumes blood of mammals up to ten times its own weight (1 g) and can live more than 2 years without further food supply. Emphasis in the experiments with Hirudo medicinalis is placed on metabolic rhythm and motility. Resorption and diffusion in tissue, development, and growth under long-term effects of cosmic proton radiation and zero-gravity are other focal points. The constancy of cellular life in the mature animals is a point in favor of these specimens. We have also taken into account the synergistic effects of the space environment on the problems just mentioned. The life-support system constructed for the leech has been tested successfully in four sounding rocket flights and, on that basis, has been prepared for a long-term mission. Long-term investigations out of the terrestrial biosphere will provide us with information concerning the degree of adaptation of certain physiological and biochemical functions and as to what extent biological readjustment or repair processes can occur under the specific stress conditions of space flight.     

Bacillus subtilis spores on artificial meteorites survive hypervelocity atmospheric entry: implications for Lithopanspermia

An important but untested aspect of the lithopanspermia hypothesis is that microbes situated on or within meteorites could survive hypervelocity entry from space through Earth's atmosphere. The use of high-altitude sounding rockets to test this notion was explored. Granite samples permeated with spores of Bacillus subtilis strain WN511 were attached to the exterior telemetry module of a sounding rocket and launched from White Sands Missile Range, New Mexico into space, reaching maximum atmospheric entry velocity of 1.2 km/s. Maximum recorded temperature during the flight was measured at 145 degrees C. The surfaces of the post-flight granite samples were swabbed and tested for recovery and survival of WN511 spores, using genetic markers and the unique DNA fingerprint of WN511 as recovery criteria. Spore survivors were isolated at high frequency, ranging from 1.2% to 4.4% compared with ground controls, from all surfaces except the forward-facing surface. Sporulation-defective mutants were noted among the spaceflight survivors at high frequency (4%). These experiments constitute the first report of spore survival to hypervelocity atmospheric transit, and indicate that sounding rocket flights can be used to model the high-speed atmospheric entry of bacteria-laden artificial meteorites.     

Electrodynamic Tethered Deorbit System Dynamics and Performance Analysis

Electrodynamic tethered deorbit technology is a novel way to remove abandoned spacecrafts like upper stages or unusable satellites. This paper investigates and analyses the deorbit performance and mission applicability of the electrodynamic tethered system. To do so, the electrodynamic tethered deorbit dynamics with multi-perturbation is firstly formulated, where the Earth magnetic field, the atmospheric drag, and the Earth oblateness effect are considered. Then, the key system parameters, including payload mass, tether length and tether type, are analyzed by numerical simulations to investigate their influences on the deorbit performance and to give the setting principles for choosing system parameters. Based on this and given an appropriate group of system parameters, numerical simulations are undertaken to study the impact of the mission parameters, including orbit height and orbit inclination, and thus to investigate the mission applicability of the electrodynamic tethered deorbit technology.     

Results of the parabolic flight tests of the rapunzel deployer

The tether assisted re-entry of small payloads is a highly interesting tool for space transportation especially for the return of small payloads from Space Station ISSA. The small tether mission Rapunzel was initiated in 1991 by the Institute of Astronautics, TU München and the Kayser-Threde Company, to design a low cost and feasible tether experiment for the verification of the tether assisted re-entry. Together with the Samara State Aerospace University, Russia, a mission concept on a Russian Resurs or Photon capsule was developed. Based on this mission a deployer has been designed, mainly based on technology of the textile industry, which insures high reliability at low cost. Recently a similar configuration is being discussed for the ESA-TSE mission.The main work during the recent time was the development and test of the breadboard model of the deployer system. After successfully completing initial ground tests with the deployer, further tests during the ESA Parabolic Flight campaign in November 1995 were conducted. After a short introduction of the overall mission scenario, the planned configuration in orbit, this paper will present the results of the microgravity test campaign onboard the KC-135 aircraft and compare them with the ground test. The deployer showed a good performance during all tests, including ejection of the end-mass, deployment, and braking. Problems that occurred during the tests will be discussed, and solutions for the detected flaws and the results of the redesign now in progress will be presented. These verifications have shown the feasibility of the concept and will lay the base for the planned development of the flight model of the deployer.     

Stability and control of electrodynamic tethers for de-orbiting applications

Electrodynamic tethers provide a very promising propulsion system for de-orbiting of spent upper stages or LEO satellites. In this application, the Lorentz force generated by the interaction between the current in the wire and the geomagnetic field produces an electrodynamic drag leading to a fast orbital decay. The attractiveness of tether system lies especially in their capability to operate with uncontrollable satellites and in the modest mass requirement.The need for significant along-track forces leads however to the onset of an undesirable torque which, if not controlled, may drive the system into a dangerous instability. The electrodynamic torque determines in-plane and out-of-plane librations whose amplitude depends upon the current in the wire, mass distribution and system dimensions. Even more important, this torque is modulated along the orbit due to the changing magnetic field and ionospheric plasma density, giving rise to forced oscillations. The counteracting (and stabilizing) gravity-gradient torque is generally to small to ensure stability in typical, strongly non-symmetrical mass distributions, where a massive satellite or upper stage is attached at the lower end and a light electron collecting device (or passive ballast mass) is deployed a few kilometers above. Reducing the electron current or increasing the mass at the upper end are both unattractive solutions.In this paper we show how the electrodynamic torque pumps energy into the system (finally leading to large librations angles) and indicate that many proposed configurations are intrinsically unstable. Our results point out the need for a control strategy. Fortunately, the librations amplitudes can be limited by acting on the current flowing in the wire. Our model of a rigid, conductive tether shows that a control based upon timely current switch-off, using energy criteria, is indeed effective and simple to implement. The resultant duty-cycles are satisfactory and affect only marginally the de-orbiting times.     

固液混合火箭发动机研究进展

固液火箭发动机因其推进剂能量较高、安全性好、易实现推力调节、可实现多次启停、药柱稳定型好、温度敏感性低、环保性佳和经济性好的特点,十分符合下一代航天平台绿色环保、智能随控、快速响应的发展需求,在探空火箭、亚轨道飞行器、靶标、小型运载火箭、助推器、上面级动力系统、姿轨控动力系统、着陆器和其他许多民用商业航天领域中都具有良好的应用前景。分析了固液火箭发动机的国内外发展现状及发展趋势,对国内外固液火箭发动机相关的典型项目、工程应用和关键技术发展情况进行了回顾和总结,并以此为基础总结固液火箭发动机技术的发展趋势和有待进一步突破的关键技术。     

Magnetobraking for Mars return vehicles

It is proposed that magnetobraking may be used to dissipate hyperbolic excess velocity from a spacecraft returning from Mars to Earth orbit. In magnetobraking, an electrodynamic tether is deployed from the spacecraft. The Earth's magnetic field produces a force on electrical current in the tether, which can be used to either brake or accelerate the spacecraft without expenditure of reaction mass. The peak acceleration on the Mars return is 0.007 m/s², and the amount of braking possible is dependent on the density and current-carrying capacity of the tether, but is independent of length. Since energy is produced as the spacecraft velocity decreases, no on-board power source is required. As the spacecraft approaches the Earth, the magnetic field increases and the power produced by the tether increases, reaching a maximum of about 800 W per kg of spacecraft mass at closest approach.     

Study on electrodynamic tether system for space debris removal

As a countermeasure for suppressing space debris growth (P. Eighler, A. Bade, Chain Reaction of Debris Generation by Collisions in Space—A Final Threat to Spaceflight? in: 40th Congress of the International Astronautical Federation, IAA-89-628, October 1989), the National Aerospace Laboratory of Japan is investigating a satellite capture, repair and removal system for non-cooperative satellites, part of which involves assessing the viability of electrodynamic tether (EDT) technology as an orbital transfer system. In this paper, some results concerning the time required to remove existing satellites, the behavior of flexible tethers during the debris separation phase, and orbital transfer strategies of EDT systems during space debris removal operations are described. From numerical simulations, it is found that EDT systems can transfer satellites from LEO to orbits with a short lifetime within a realistic timeframe. It is also found that the stability of EDT systems is compromised when debris separation occurs both while a tether current is running and when the ratio of the end mass to that of the service satellite is high. To ensure stability, the end mass should be selected from the target debris group with due regard for the maximum possible mass that can be maneuvered safely. Moreover, it is also found that orbital elements (a, e, i) can be changed independently with an adequate current control strategy.     

大推力液体火箭发动机研究

大推力火箭发动机是航天发展的基础,是国家高科技水平和综合国力的体现。分析了运载火箭主动力发展的现状和趋势,指出大推力液氧煤油发动机和液氧液氢发动机是发展方向和最佳组合。提出了我国重型运载火箭大推力液氧煤油发动机和液氧液氢发动机的总体方案和主要参数,研究了两种发动机的关键技术及其解决途径。这两种大推力发动机的研制,将为我国载人登月、深空探测等重大航天活动和空间利用提供动力支撑。     

瑞典的探空火箭综述

介绍了瑞典航天公司发射的云雀，黑雁和ＭＡＸＵＳ探空火箭及其所用的固体火箭发动机的性能，简要讨论了瑞典探空火箭发展特点。     

电动绳系在低极轨卫星中的应用研究

低极轨卫星具有轨道周期短、对地观测分辨率高等优点,但由于所在轨道大气阻力大,其使用寿命受到较大限制。文章提出采用水平结构电动绳系抵消低极轨卫星大气阻力的方法,通过系绳电流与地球磁场相互作用产生洛仑兹力进行推进,进而在无燃料消耗的情况下实现对低极轨卫星轨道高度的维持。初步分析了该方法在低极轨不同尺寸卫星中的应用潜力,计算了160 、400 和800 km 典型高度低极轨卫星所经历的地球磁场、电离层和高层大气环境相关参数变化,比较了不同条件下电动绳系推力与大气阻力大小随轨道位置的变化。分析结果表明,该方法适用于400 km 轨道高度以上大卫星;在满足一定系绳长度和轨道高度的条件下,电动绳系可以有效延长低极轨卫星的轨道寿命。     

在轨服务中空间系绳的应用及发展

针对空间系绳在空间在轨服务中的应用与发展问题,在简述空间系绳传统应用及试验情况的基础上,综述了空间绳系机器人、空间绳网机器人两类新在轨应用方式的研究和发展,主要包括动力学建模、结构设计、相对状态测量、逼近/抓捕控制、拖曳变轨等。最后进一步讨论了空间系绳未来的研究方向。     

20世纪的中国火箭探空

介绍了中国实用火箭探空系统的种类、实用探空火箭的性能参数和飞行情况、火箭探空取得的技术进步和存在的问题。     

中国航天固体火箭技术的发展

叙述了20世纪50年代以来中国航天固体火箭推进技术的发展历程，介绍了9种最具代表性的固体火箭发动机的技术特征、研制过程、地面试验和飞行情况，这些发动机分别应用于中国的探空火箭、运载火箭上面级和应用卫星变轨系统。文中还简要地评述了中国固体推进各单项技术的发展水平。