首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Solar prominences are magnetic structures incarcerating cool and dense gas in an otherwise hot solar corona. Prominences can be categorized as quiescent and active. Their origin and the presence of cool gas (104?K) within the hot (106K) solar corona remains poorly understood. The structure and dynamics of solar prominences was investigated in a large number of observational and theoretical (both analytical and numerical) studies. In this paper, an analytic model of quiescent solar prominence is developed and used to demonstrate that the prominence velocity increases exponentially, which means that some gas falls downward towards the solar surface, and that Alfvén waves are naturally present in the solar prominences. These theoretical predictions are consistent with the current observational data of solar quiescent prominences.  相似文献   

2.
The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey (2MASS) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as 2.28±0.3 and -0.38±0.11?mas?yr?1 for Teutsch 10 and 0.48±0.3 and 3.35±0.16?mas?yr?1 for Teutsch 25 using PPMXL1 catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as E(B-V)=0.96±0.3?mag for Teutsch 10 and 0.58±0.2?mag for Teutsch 25, while the corresponding distances are 2.4±0.2 and 1.9±0.1?kpc. Ages of 70±10?Myr for Teutsch 10 and 900±100?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as 1.23±0.30 and 1.09±0.35 for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value (x=1.35) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.  相似文献   

3.
The maximum entropy formalism and dimensional analysis are used to derive a power-law spectrum of accelerated electrons in impulsive solar flares, where the particles can contain a significant fraction of the total flare energy. Entropy considerations are used to derive a power-law spectrum for a particle distribution characterised by its order of magnitude of energy. The derivation extends an earlier one-dimensional argument to the case of an isotropic three-dimensional particle distribution. Dimensional arguments employ the idea that the spectrum should reflect a balance between the processes of energy input into the corona and energy dissipation in solar flares. The governing parameters are suggested on theoretical grounds and shown to be consistent with solar flare observations. The flare electron flux, differential in the non-relativistic electron kinetic energy E, is predicted to scale as E-3. This scaling is in agreement with RHESSI measurements of the hard X-ray flux that is generated by deka-keV electrons, accelerated in intense solar flares.  相似文献   

4.
We used the ugr magnitudes of 1437467 F-G type main-sequence stars with metal abundance -2?[Fe/H]?+0.2 dex and estimated radial and vertical metallicity gradients for high Galactic-latitude fields, 50°<b?90° and 0°<l?360°, of the Milky Way Galaxy. The radial metallicity gradient d[Fe/H]/dR=-0.042±0.011 dex kpc?1 estimated for the stars with 1.31<z1.74 kpc is attributed to the thin-disc population. While, the radial gradients evaluated for stars at higher vertical distances are close to zero indicating that the thick disc and halo have not undergone a radial collapse phase at least at high Galactic latitudes. The vertical metallicity gradients estimated for stars with three different Galactic latitudes, 50°<b?65°,65°<b?80° and 80°<b?90° do not show a strong indication for Galactic latitude dependence of our gradients. The thin disc, 0.5<z?2 kpc, with a vertical metallicity gradient dFe/H/dz=-0.308±0.018 dex kpc?1, is dominant only in galactocentric distance interval 6<R?10 kpc, while the thick disc (2<z?5 kpc) could be observed in the intervals 6<R?10 and 10<R?15 kpc with compatible vertical metallicity gradients, i.e. dFe/H/dz=-0.164±0.014 dex kpc?1 and dFe/H/dz=-0.172±0.016 dex kpc?1. Five vertical metallicity gradients are estimated for the halo (z>5 kpc) in three galactocentric distance intervals, 6<R?10,10<R?15 and 15<R?20 kpc. The first one corresponding to the interval 6<R?10 kpc is equal to dFe/H/dz=-0.023±0.006 dex kpc?1, while the others at larger galactocentric distances are close to zero. We derived synthetic vertical metallicity gradients for 2,230,167 stars and compared them with the observed ones. There is a good agreement between the two sets of vertical metallicity gradients for the thin disc, while they are different for the thick disc. For the halo, the conspicuous difference corresponds to the galactocentric distance interval 6<R?10 kpc, while they are compatible at higher galactocentric distance intervals.  相似文献   

5.
6.
The Atacama Large Millimeter-Submillimeter Array (ALMA) has opened a new window for studying the Sun via high-resolution high-sensitivity imaging at millimeter wavelengths. In this contribution I review the capabilities of the instrument for solar observing and describe the extensive effort taken to bring the possibility of solar observing with ALMA to the scientific community. The first solar ALMA observations were carried out during 2014 and 2015 in two ALMA bands, Band 3 (λ=3?mm) and Band 6 (λ=1.3?mm), in single-dish and interferometric modes, using single pointing and mosaicing observing techniques, with spatial resolution up to 2″ and 1″ in the two bands, respectively. I overview several recently published studies which made use of the first solar ALMA observations, describe current status of solar observing with ALMA and briefly discuss the future capabilities of the instrument.  相似文献   

7.
The rotational state of Envisat is re-estimated using the specular glint times in optical observation data obtained from 2013 to 2015. The model is simplified to a uniaxial symmetric model with the first order variation of its angular momentum subject to a gravity-gradient torque causing precession around the normal of the orbital plane. The sense of Envisat’s rotation can be derived from observational data, and is found to be opposite to the sense of its orbital motion. The rotational period is estimated to be (120.674±0.068)·exp(4.5095±0.0096)×10-4·ts, where t is measured in days from the beginning of 2013. The standard deviation is 0.760?s, making this the best fit obtained for Envisat in the literature to date. The results demonstrate that the angle between the angular momentum vector and the negative normal of the orbital plane librates around a mean value of 8.53°±0.42° with an amplitude from about 0.7° (in 2013) to 0.5° (in 2015), with the libration period equal to the precession period of the angular momentum, from about 4.8?days (in 2013) to 3.4?days (in 2015). The ratio of the minimum to maximum principal moments of inertia is estimated to be 0.0818±0.0011, and the initial longitude of the angular momentum in the orbital coordinate system is 40.5°±9.3°. The direction of the rotation axis derived from our results at September 23, 2013, UTC 20:57 is similar to the results obtained from satellite laser ranging data but about 20° closer to the negative normal of the orbital plane.  相似文献   

8.
The solar dipole moment at activity minimum is a good predictor of the strength of the subsequent solar cycle. Through a systematic analysis using a state-of-the-art 2×2D solar dynamo model, we found that bipolar magnetic regions (BMR) with atypical characteristics can modify the strength of the next cycle via their impact on the buildup of the dipole moment as a sunspot cycle unfolds. In addition to summarizing these results, we present further effects of such “rogue” BMRs. These have the ability to generate hemispheric asymmetry in the subsequent sunspot cycle, since they modify the polar cap flux asymmetry of the ongoing cycle. We found strong correlation between the polar cap flux asymmetry of cycle i and the total pseudo sunspot number asymmetry of cycle i+1. Good correlation also appears in the case of the time lag of the hemispheres of cycle i+1.  相似文献   

9.
We report on extensive BVRcIc photometry and low-resolution (λ/Δλ250) spectroscopy of the deep-space debris WT1190F, which impacted Earth offshore from Sri Lanka, on 2015 November 13. In spite of its likely artificial origin (as a relic of some past lunar mission), the case offered important points of discussion for its suggestive connection with the envisaged scenario for a (potentially far more dangerous) natural impactor, like an asteroid or a comet.Our observations indicate for WT1190F an absolute magnitude Rc=32.45±0.31, with a flat dependence of reflectance on the phase angle, such as dRc/d?0.007±2?mag?deg?1. The detected short-timescale variability suggests that the body was likely spinning with a period twice the nominal figure of Pflash=1.4547±0.0005s, as from the observed lightcurve. In the BVRcIc color domain, WT1190F closely resembled the Planck deep-space probe. This match, together with a depressed reflectance around 4000 and 8500 Å may be suggestive of a “grey” (aluminized) surface texture.The spinning pattern remained in place also along the object fiery entry in the atmosphere, a feature that may have partly shielded the body along its fireball phase perhaps leading a large fraction of its mass to survive intact, now lying underwater along a tight (1×80?km) strip of sea, at a depth of 1500?m or less.Under the assumption of Lambertian scatter, an inferred size of 216±30/α/0.1?cm is obtained for WT1190F. By accounting for non-gravitational dynamical perturbations, the Area-to-Mass ratio of the body was in the range (0.006?AMR?0.011)?m2?kg?1.Both these figures resulted compatible with the two prevailing candidates to WT1190F’s identity, namely the Athena II Trans-Lunar Injection Stage of the Lunar Prospector mission, and the ascent stage of the Apollo 10 lunar module, callsign “Snoopy”. Both candidates have been analyzed in some detail here through accurate 3D CAD design mockup modelling and BRDF reflectance rendering to derive the inherent photometric properties to be compared with the observations.  相似文献   

10.
The Medium Earth Orbit (MEO) region hosts satellites for navigation, communication, and geodetic/space environmental science, among which are the Global Navigation Satellites Systems (GNSS). Safe and efficient removal of debris from MEO is problematic due to the high cost for maneuvers needed to directly reach the Earth (reentry orbits) and the relatively crowded GNSS neighborhood (graveyard orbits). Recent studies have highlighted the complicated secular dynamics in the MEO region, but also the possibility of exploiting these dynamics, for designing removal strategies. In this paper, we present our numerical exploration of the long-term dynamics in MEO, performed with the purpose of unveiling the set of reentry and graveyard solutions that could be reached with maneuvers of reasonable ΔV cost. We simulated the dynamics over 120–200?years for an extended grid of millions of fictitious MEO satellites that covered all inclinations from 0 to 90°, using non-averaged equations of motion and a suitable dynamical model that accounted for the principal geopotential terms, 3rd-body perturbations and solar radiation pressure (SRP). We found a sizeable set of usable solutions with reentry times that exceed 40 years, mainly around three specific inclination values: 46°, 56°, and 68°; a result compatible with our understanding of MEO secular dynamics. For ΔV?300 m/s (i.e., achieved if you start from a typical GNSS orbit and target a disposal orbit with e<0.3), reentry times from GNSS altitudes exceed 70 years, while low-cost (ΔV?535 m/s) graveyard orbits, stable for at lest 200?years, are found for eccentricities up to e0.018. This investigation was carried out in the framework of the EC-funded “ReDSHIFT” project.  相似文献   

11.
Classic solar atmospheric models put the Chromosphere-Corona Transition Region (CCTR) at 2 Mm above the τ5000=1 level, whereas radiative MHD (rMHD) models place the CCTR in a wider range of heights. However, observational verification is scarce. In this work we review and discuss recent results from various instruments and spectral domains. In SDO and TRACE images spicules appear in emission in the 1600, 1700 and 304 Å bands and in absorption in the EUV bands; the latter is due to photo-ionization of H i and He i, which increases with wavelength. At the shortest available AIA wavelength and taking into account that the photospheric limb is 0.34 Mm above the τ5000=1 level, we found that CCTR emission starts at 3.7 Mm; extrapolating to λ=0, where there is no chromospheric absorption, we deduced a height of 3.0±0.5 Mm, which is above the value of 2.14 Mm of the Avrett and Loeser model. Another indicator of the extent of the chromosphere is the height of the network structures. Height differences produce a limbward shift of features with respect to the position of their counterparts in magnetograms. Using this approach, we measured heights of 0.14±0.04 Mm (at 1700 Å), 0.31±0.09 Mm (at 1600 Å) and 3.31±0.18 Mm (at 304 Å) for the center of the solar disk. A previously reported possible solar cycle variation is not confirmed. A third indicator is the position of the limb in the UV, where IRIS observations of the Mg ii triplet lines show that they extend up to 2.1 Mm above the 2832 Å limb, while AIA/SDO images give a limb height of 1.4±0.2 Mm (1600 Å) and 5.7±0.2 Mm (304 Å). Finally, ALMA mm-λ full-disk images provide useful diagnostics, though not very accurate, due to their relatively low resolution; values of 2.4±0.7 Mm at 1.26 mm and 4.2±2.5 Mm at 3 mm were obtained. Putting everything together, we conclude that the average chromosphere extends higher than homogeneous models predict, but within the range of rMHD models..  相似文献   

12.
We investigate the conditions under which the fluting (m=2), m=3, and m=12 magnetohydrodynamic (MHD) modes in a uniformly twisted flux tube moving along its axis become unstable in order to model the Kelvin–Helmholtz (KH) instability in a twisting solar coronal hole jet near the northern pole of the Sun. We employed the dispersion relations of MHD modes derived from the linearized MHD equations. We assumed real wavenumbers and complex angular wave frequencies, namely complex wave phse velocities. The dispersion relations were solved numerically at fixed input parameters (taken from observational data) and varying degrees of torsion of the internal magnetic field. It is shown that the stability of the modes depends upon five parameters: the density contrast between the flux tube and its environment, the ratio of the external and internal axial magnetic fields, the twist of the magnetic field lines inside the tube, the ratio of transverse and axial jet’s velocities, and the value of the Alfvén Mach number (the ratio of the tube axial velocity to Alfvén speed inside the flux tube). Using a twisting jet of 2010 August 21 by SDO/AIA and other observations of coronal jets we set the parameters of our theoretical model and have obtained that in a twisted magnetic flux tube of radius of 9.8 Mm, at a density contrast of 0.474 and fixed Alfvén Mach number of ?0.76, for the three MHD modes there exist instability windows whose width crucially depends upon the internal magnetic field twist. It is found that for the considered modes an azimuthal magnetic field of 1.31.4 G (computed at the tube boundary) makes the width of the instability windows equal to zero, that is, it suppress the KH instability onset. On the other hand, the times for developing KH instability of the m=12 MHD mode at instability wavelengths between 15 and 12 Mm turn out to be in the range of 1.94.7 min that is in agreement with the growth rates estimated from the temporal evolution of the observed unstable jet’s blobs in their initial stage.  相似文献   

13.
Physics based SRP (Solar Radiation Pressure) models using ray tracing methods are powerful tools when modelling the forces on complex real world space vehicles. Currently high resolution (1?mm) ray tracing with secondary intersections is done on high performance computers at UCL (University College London). This study introduces the BVH (Bounding Volume Hierarchy) into the ray tracing approach for physics based SRP modelling and makes it possible to run high resolution analysis on personal computers. The ray tracer is both general and efficient enough to cope with the complex shape of satellites and multiple reflections (three or more, with no upper limit). In this study, the traditional ray tracing technique is introduced in the first place and then the BVH is integrated into the ray tracing. Four aspects of the ray tracer were tested for investigating the performance including runtime, accuracy, the effects of multiple reflections and the effects of pixel array resolution.Test results in runtime on GPS IIR and Galileo IOV (In Orbit Validation) satellites show that the BVH can make the force model computation 30–50 times faster. The ray tracer has an absolute accuracy of several nanonewtons by comparing the test results for spheres and planes with the analytical computations. The multiple reflection effects are investigated both in the intersection number and acceleration on GPS IIR, Galileo IOV and Sentinel-1 spacecraft. Considering the number of intersections, the 3rd reflection can capture 99.12%,99.14%, and 91.34% of the total reflections for GPS IIR, Galileo IOV satellite bus and the Sentinel-1 spacecraft respectively. In terms of the multiple reflection effects on the acceleration, the secondary reflection effect for Galileo IOV satellite and Sentinel-1 can reach 0.2?nm/s2 and 0.4?nm/s2 respectively. The error percentage in the accelerations magnitude results show that the 3rd reflection should be considered in order to make it less than 0.035%. The pixel array resolution tests show that the dimensions of the components have to be considered when choosing the spacing of the pixel in order not to miss some components of the satellite in ray tracing. This paper presents the first systematic and quantitative study of the secondary and higher order intersection effects. It shows conclusively the effect is non-negligible for certain classes of misson.  相似文献   

14.
The precise modeling and knowledge of non-gravitational forces acting on satellites is of big interest to many scientific tasks and missions. Since 2002, the twin GRACE satellites have measured these forces in a low Earth orbit with highly precise accelerometers, for about 15?years. Besides the significance for the GRACE mission, these measurement data allow the evaluation of modeling approaches and the improvement of force models. Unfortunately, before any scientific usage, the accelerometer measurements need to be calibrated, namely scale factor and bias have to be regularly estimated.In this study we demonstrate an accelerometer calibration approach, solely based on high precision non-gravitational force modeling without any use of empirically or stochastically estimated parameters, using our in-house developed satellite simulation tool XHPS. The aim of this work is twofold, first we use the accelerometer data and the residuals resulting from the calibration to quantitatively analyze and validate different non-gravitational force model approaches. In a second step, we compare the calibration results to three different calibration methods from different authors, based on gravity field recovery, GPS-based precise orbit determination, and based on modeled accelerations.We consider atmospheric drag forces and winds, as well as radiation forces due to solar radiation pressure, albedo, Earth infrared and thermal radiation (TRP) of the satellite itself. For TRP, we investigate different transient temperature calculation approaches for the satellite surfaces with absorbed power from the aforementioned radiation sources. A detailed finite element model of the satellite is utilized for every force, considering orientation, material properties and shadowing conditions for each element.For cross-track and radial direction, which are mainly affected by the radiative forces, our calibration residuals are quite small when drag is not super dominant (1–3?nm/s2 for total accelerations around ±50?nm/s2). For these directions the calibration seems to perform better than the other compared methods, where some bigger differences were found. For the drag dominated along-track direction it is vice versa, here our method is not sensitive enough because the difference between modeled and measured drag is bigger (e.g. residuals around 10?nm/s2 for total accelerations around ±70?nm/s2 for low solar activity). In along-track direction the orbit determination based methods are more sensitive and produce more reliable results. Results for the complete GRACE mission time span from 2003 to 2017 are shown, covering different seasonal environmental conditions.  相似文献   

15.
For the first time, empirical model of daytime vertical E×B drift based on Empirical Orthogonal functions (EOF) decomposition technique is presented. Day-to-day variability of E×B drift inferred from horizontal (H) geomagnetic field data around dip latitude for the period of 2008–2013 is used to both develop and validate the model. Results show that the EOF technique is promising with modelled values and data giving correlation coefficient values of at least 0.90 for geomagnetic conditions of both Kp?3 and Kp>3 within 2008–2013. Independent model validation shows that in situ E×B values from ion velocity meter (IVM) instrument on-board C/NOFS satellite are closer to model E×B estimates than the climatological Scherliess-Fejer (SF) model incorporated within the International Reference Ionosphere (IRI).  相似文献   

16.
We study the effects of space weather on the ionosphere and low Earth orbit (LEO) satellites’ orbital trajectory in equatorial, low- and mid-latitude (EQL, LLT and MLT) regions during (and around) the notable storms of October/November, 2003. We briefly review space weather effects on the thermosphere and ionosphere to demonstrate that such effects are also latitude-dependent and well established. Following the review we simulate the trend in variation of satellite’s orbital radius (r), mean height (h) and orbit decay rate (ODR) during 15 October–14 November 2003 in EQL, LLT and MLT. Nominal atmospheric drag on LEO satellite is usually enhanced by space weather or solar-induced variations in thermospheric temperature and density profile. To separate nominal orbit decay from solar-induced accelerated orbit decay, we compute r,h and ODR in three regimes viz. (i) excluding solar indices (or effect), where r=r0,h=h0 and ODR=ODR0 (ii) with mean value of solar indices for the interval, where r=rm,h=hm and ODR=ODRm and (iii) with actual daily values of solar indices for the interval (r,h and ODR). For a typical LEO satellite at h?=?450?km, we show that the total decay in r during the period is about 4.20?km, 3.90?km and 3.20?km in EQL, LLT and MLT respectively; the respective nominal decay (r0) is 0.40?km, 0.34?km and 0.22?km, while solar-induced orbital decay (rm) is about 3.80?km, 3.55?km and 2.95?km. h also varied in like manner. The respective nominal ODR0 is about 13.5?m/day, 11.2?m/day and 7.2?m/day, while solar-induced ODRm is about 124.3?m/day, 116.9?m/day and 97.3?m/day. We also show that severe geomagnetic storms can increase ODR by up to 117% (from daily mean value). However, the extent of space weather effects on LEO Satellite’s trajectory significantly depends on the ballistic co-efficient and orbit of the satellite, and phase of solar cycles, intensity and duration of driving (or influencing) solar event.  相似文献   

17.
We study the roto-orbital motion of a triaxial rigid body around a sphere, which is assumed to be much more massive than the triaxial body. The associated dynamics of this system, which consists of a normalized Hamiltonian with respect to the fast angles (partial averaging), is investigated making use of variables referred to the total angular momentum. The first order approximation of this model is integrable. We carry out the analysis of the relative equilibria, which hinges principally in the dihedral angle between the orbital and rotational planes and the ratio among the moments of inertia ρ=(B-A)/(2C-B-A). In particular, the dynamics of the body frame, though formally given by the classical Euler equations, experiences changes of stability in the principal directions related to the roto-orbital coupling. When ρ=1/3, we find a family of relative equilibria connected to the unstable equilibria of the free rigid body.  相似文献   

18.
19.
With the combination of two evolutionary algorithms EDA and DE, a new method of initial orbit determination for satellites based on ground-based too-short-arc is established. Compared with other algorithms, the proposed method focuses on the most densely populated region in the solution space rather than the individual with best fitness value. Both the global information and local information are well fused in the search of optimum. In the method (a,e,M) are treated as variables of the optimization, and the optimization procedure is carried out as a two-stage hierarchical optimization problem which has three variables for each stage. Kernel density estimation is applied to build the probability distribution model without any assumptions of the specified distribution, accompanied by handling semi-major axis and eccentricity as a pair of dependent variables in the construction of the probability for the correlation between them in the practice. Numerical experiments with real ground-based observations show that the proposed method is applicable to too-short-arc with even 3?s, and the result of bias in several kilometers can be achieved with 5 error added to angular measurements.  相似文献   

20.
This paper introduces the Sheffield Magnetohydrodynamics Algorithm Using GPUs (SMAUG+), an advanced numerical code for solving magnetohydrodynamic (MHD) problems, using multi-GPU systems. Multi-GPU systems facilitate the development of accelerated codes and enable us to investigate larger model sizes and/or more detailed computational domain resolutions. This is a significant advancement over the parent single-GPU MHD code, SMAUG (Griffiths et al., 2015). Here, we demonstrate the validity of the SMAUG?+?code, describe the parallelisation techniques and investigate performance benchmarks. The initial configuration of the Orszag-Tang vortex simulations are distributed among 4, 16, 64 and 100?GPUs. Furthermore, different simulation box resolutions are applied: 1000×1000,2044×2044,4000×4000 and 8000×8000. We also tested the code with the Brio-Wu shock tube simulations with model size of 800 employing up to 10?GPUs. Based on the test results, we observed speed ups and slow downs, depending on the granularity and the communication overhead of certain parallel tasks. The main aim of the code development is to provide massively parallel code without the memory limitation of a single GPU. By using our code, the applied model size could be significantly increased. We demonstrate that we are able to successfully compute numerically valid and large 2D MHD problems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号