Spiral evolution applied to legacy avionics systems

The US Department of Defense (DoD), through the Office of the Secretary of Defense (OSD), has determined that evolutionary acquisition is their strategy of choice for future software-intensive systems, and that the spiral development model (SDM) is the preferred method/process for software-intensive development life cycles. Electronic Systems Command (ESC) at Hanscom AFB, Massachusetts, has written a draft handbook on the use of Spiral Development for all future Command and Control (C2) systems, including reference to the DoD 5000 series and Air Force Program Directive 63-1, Acquisition System, which deploys this OSD mandate for future C2 systems. Barry Boehm's continued work on SDM which he conceived in the 1980s, is heavily biased toward development of new systems that are software-intensive, as noted in a workshop he gave at the Software Engineering Institute (SEI) in 2000.     

Surveillance through walls and other opaque materials

The Department of Defense (DoD) has funded a dazzling array of “high tech” solutions for many of the problems facing our military forces. Many of these “solutions” have been effective for long range mass destruction but have not been applicable for the close-in hand-to-hand combat that is on our streets. Our goal at the Hughes AET Center has been to convert “high tech” DoD capabilities into cost effective tools to help law enforcement agencies do their jobs better. Surveillance systems presently used by law enforcement officers make extensive use of television, infrared and other Line-of-Sight (LOS) surveillance systems. However, these systems cannot tell what is happening on the other side of a wall, behind bushes, around the corner, in the dark or through a dense fog. A new sensor has been developed that uses technology developed by the DoD for missile warhead fuzing. This small, light weight, low power “Radar” is based upon the fact that radio waves can penetrate nonmetallic materials. This new surveillance capability can help provide information about what is in a wall, ceiling or floor or on the other side of a door or concrete wall. Real field scenarios are used in this paper to show how this radar works and how field users can tell if someone is moving inside a building, even from remote locations     

A Survey of Software Quality Assurance

This summarizes the authors' research into the state-of-the-practice of software quality assurance (SQA) in software organizations throughout the Department of Defense (DoD). Information was obtained through personal visits to a limited number of software facilities and by utilizing a SQA questionnaire that was mailed to 27 DoD software organizations. Twenty questionnaires were returned from Army, Navy, Marine Corps, and Air Force organizations involved in the Life Cycle Software Support (LCSS) process. The survey developed information regarding such topics as: staffing; personnel qualifications; quality standards used; SQA responsibilities; error data collection; adequacy of existing documentation; staff composition; distribution of SQA effort; and workforce mix. In addition, a list of SQA ``Lessons Learned' was developed from comments made by DoD quality managers. The results of this study indicate a wide variance in the application of SQA within the DoD.     

Generic Integrated Maintenance Diagnostics

Maintenance Support for a weapon system involves both preventive and corrective maintenance actions. Preventive maintenance is normally associated with mechanical equipment, and requires prognostic maintenance techniques to predict failures before they occur. Corrective maintenance is more closely associated with electronic equipment, and requires diagnostic maintenance techniques to detect and isolate failures after they occur. To pursue a systems approach to weapon system maintenance using both prognostics and diagnostics, the Air Force has initiated a program entitled, ``Generic Integrated Maintenance Diagnostics (GIMADs)'. This paper provides insight into the GIMADS program at Aeronautical Systems Division.     

Open system concepts for modular avionics

Advanced communications, guidance and navigation systems play key roles in determining superiority of one combat aircraft over another. The use of advanced technology is essential to meeting the mission requirements of present as well as future aircraft. Modular avionics are being used in next generation aircraft, such as the Air Force F-22 fighter and the Army Comanche helicopter, as the means of achieving higher levels of performance, including reduced volume and improved adaptability, maintainability, and expandability. New system acquisitions such as Joint Strike Fighter will attempt to achieve these same performance levels but at dramatically reduced life cycle cost. Retrofit applications will also take on increasing roles in meeting this affordability need as the Department of Defense (DoD) struggles to maintain readiness in the face of the shrinking defense budget. The government is encouraging the use of open standards practices as a means of addressing the affordability issue. The Open Systems Joint Task Force (OS-JTF), formed in September 1994, is chartered to “sponsor and accelerate the adoption of open systems in weapons systems and subsystem electronics to reduce life-cycle costs and facilitate effective weapon system intra- and interoperability”. The purpose of this paper is to relate the concept of open systems to modular avionics. It discusses the key attributes of an open systems approach and identifies key technologies necessary for its success     

Advances in DoD's ATS Framework

The Automatic Test System (ATS) Executive Directorate (ED) is charged with developing objectives for the Department of Defense (DoD) ATS modernization. The DoD ATS Framework Working Group (FWG) was established by the ATS ED to create a Framework addressing these objectives. The FWG consists of two sub-groups: Management, that includes members from all of the DoD Services, and Technical. The Framework is made up of key elements and associated specifications and standards that form the open system architecture approach for DoD ATSs. In addition to creating and updating key element definitions, the FWG focuses on identifying commercial ATS related specifications that might satisfy the elements in the Framework. The standards specified in the DoD ATS Framework are documented in the DoD's Information Technology Standards Repository (DISR) and thereby become a mandatory requirement for all DoD ATS acquisitions. The Framework is also being specifically called out in DoD ATS requirements documents so that its standards are incorporated in future DoD ATS acquisitions, such as the Navy's eCASS.     

Sole means navigation in US Navy aircraft

The current edition of the US Federal Radionavigation Plan, issued in 1984, presents a consolidated federal plane on the management of those radionavigation systems which are used by both the civilian and military sectors. It states the US Dept. of Defense (DoD) goal to phase out the use of TACAN, VOR/DME, OMEGA, LORAN C, and TRANSIT in military platforms and for Global Positioning System (GPS) to become the standard radionavigation system for DoD. This would eliminate all the current sole-means air navigation systems (TACAN and VOR/DME) aboard military aircraft. Instrument Flight Rule (IFR) operations within controlled airspace requires an operating sole-means air navigation system to be aboard the aircraft. The authors investigate the requirements for GPS certification as a sole means air navigation system in the US National Airspace System (NAS); discuss the implication for GPS user equipment (UE) hardware and software; describe the actual UE implementation; and discuss approaches for UE integration with flight instruments on US Navy aircraft     

Proposal to TPS delivery in 4 months?

Decreasing the often lengthy Test Program Set (TPS) development time is a high priority for both DoD and commercial industry. A protracted test development time for a commercial product can make or break its success. It can impact time-to-market goals for a product, which in turn, can result in a loss of market share. Though the DoD world has different objectives, they, too, are concerned with long test development times which can increase costs and jeopardize a weapon system's mission readiness. The case study for this paper is a test system developed by BAE Systems in less than four months to meet a commercial customer's stringent schedule requirements. The factors that contributed to the success of this project are examined, as is their relevance to the DoD world. The desire is to apply relevant lessons learned from the commercial industry to DoD programs, yielding a decrease in TPS development time     

AFRL Cryogenic Technology Development Programs

This is an overview of the cryogenic refrigerator and cryogenic integration programs in development and characterization under the Cryogenic Technologies Group, Space Vehicles Directorate of the Air Force Research Laboratory (AFRL). The vision statement for the Air Force Research Laboratory Cryogenic Technologies Group is to support the space community as the center of excellence for developing and transitioning space cryogenic thermal management technologies. The primary customers for the AFRL cryogenic technology development programs are Ballistic Missile Defense Organization (BMDO), the USAF SBIRS (space based infrared) Low program office, and DoD space surveillance programs. This describes a variety of Stirling, pulse tube, Reverse Brayton, Joule-Thomson, and Sorption cycle cryocoolers currently under development to meet current and future Air Force and DoD requirements. The AFRL customer single stage cooling requirements at 10 K, 35 K, 60 K, 150 K, and multi-stage cooling requirements at 35/60 K are addressed. In order to meet these various requirements, the AFRL Cryogenic Technologies Group is pursuing various strategic cryocooler and cryogenic integration options. The Air Force Research Laboratory is also developing several advanced cryogenic integration technologies that will result in the reduction in current cryogenic system integration penalties and design time. These technologies include the continued development of the cryogenic systems integration model (CSIM), 60 K, and 100 K thermal storage units and heat pipes, cryogenic straps, thermal switches, and development of an integrated lightweight cryogenic bus (CRYOBUS).     

Near term approach to data relay for satellites under test

The increasing need for a continuous communications link with U.S. Department of Defense (DoD) spacecraft during test missions in low Earth orbit (LEG) has resulted in greater interest in geosynchronous data relay services. This may be a more economical alternative to building additional remote tracking stations for the Air Force Satellite Control Network (AFSCN), and avoids tying up operational assets for a test mission. A low-cost near-term approach for such a space-based data relay system would utilize two existing Defense Satellite Communication System III spacecraft, two existing ground terminals, and a small, standardized terminal using autonomous antenna pointing for the space vehicle under test. Such a system design is presented     

Successful deployment of commercial ATE to an Air Force I-level (back-shop) repair facility

In today's world of constrained budgets, one of the problems the military faces is the challenge of trying to maintain organic maintenance capabilities. Historically, the US Air Force has desired to achieve an autonomous capability to maintain the equipment it uses. This has been achieved, traditionally, by setting-up three levels of maintenance: organizational; intermediate (back-shop); and depot. The I-level back-shops often utilize militarized automatic test equipment (ATE) and test program sets (TPSs) to test today's complex aircraft line replaceable units (LRUs). And even though this is still a cost-effective maintenance philosophy, it has become costly to develop militarized ATE. The Department of Defense (DoD) has been very active in trying to reduce the total ownership cost of ATE in the government inventory. One approach is to utilize commercial, instead of Mil-Spec, ATE. However, utilizing commercial ATE at an USAF back-shop is not without its tradeoffs and challenges as it represents a significant deviation from the way the USAF maintenance squadrons are accustomed to "doing business." This paper documents the current success story of replacing the legacy C-17 I-level ATE with a commercial ATE.     

Definitions of Effectiveness Terms: A Report on the Purpose and Contents of MIL-STD-721B

The impact of the Systems Effectiveness concept upon U.S. military terminology required for acquisition of modern weapon systems necessitated a thorough revision of MIL-STD-721A and consolidation with MIL-STD-778 and MIL-STD447. Inclusion of a number of new terms and their definitions, as well as addition of standard definitions for terms on human factors and safety, was found to be necessary. The resulting military standard has been approved by the U.S. Department of Defense for use by all of its departments and agencies. Its contents should be of great interest to management and engineers in private industry who are concerned with the development and production of weapon systems for the Army, Navy, and Air Force. This standard is now in print and will be available for distribution early in 1967; this paper is written by one of the participants in the revision and compilation of this military standard and is published here for the purpose of information on its scope and contents.     

武器装备电磁兼容性的系统验证技术探讨

针对武器装备电磁兼容性系统验证技术的特点和必要性以及国内外的发展情况,提出了武器装备电磁兼容性系统验证技术的研究内容和验证项目。     

Mission/flight systems integration study: a long-term electronicsplanning project

The objective of the Mission/Flight System Integration Study (M/FSIS) is to identify the requirements and development objectives for electronics systems technologies and conceptual architectures in future weapon system applications (in and around the year 2005), based on analyses of future missions, threats, scenarios, aerospace system concepts, and technology trends. The products are substantiated requirements for future electronics functions, systems, and architecture; technology development objectives and roadmaps; and conceptual electronics architectures and functional definitions. The study outputs will serve to guide laboratory technology development planning and programs; guide weapon system program office long-range electronics planning; illustrate user needs in terms of electronics requirements; and guide air logistics center weapon-system master planning     

DESC efforts for parts quality improvement

Some of the impact that the test program at the Defense Electronics Supply Center (DESC) is having on improving the quality of products being supplied to its customers is illustrated. DESC test program non-mil lot rejection rates were nearing 50% for discrete semiconductors tested in receiving inspection. The associated part reject rate was nearly 15%. The part reject rate for all federal supply classes (FSCs) being sampled is less than 1%. Plans to drive the defect rate toward 100 PPM are discussed. Data indicate an increase in the quality of DESC-sampled devices being supplied for the military services over the last few years. The test programs and the sampling and test requirements are described     

Vertical test integration

Today, most every weapon system is electronics intensive. Digital computers are at the core of military aircraft, ship, and vehicle weapons systems. Indeed, each weapon system's performance is largely determined by its digital computers and other electronics. This electronics dependency is necessary in order to provide the speed, functional compliance, and accuracy to achieve the required weapon system performance. Historically, test systems required for the various maintenance levels and also at the manufacturing site have each been uniquely developed, employed, and sustained for only one area of weapon system electronics support. There are a number of reasons for this situation including different organizations responsible for the levels of support, different funding sources, timing limitations, and technical feasibility. In recent years, however, commercial-off-the-shelf (COTS) advances in measurement and stimulation hardware, personal computers, Windows operating systems, flexible test programming languages, and more, have made it technically feasible to develop a family of test systems that provide common weapon system electronics support at all levels. Some use the phrase Vertical Test Integration to describe this concept of factory/field/depot integration     

Automated testing

Since the DoD was the leader in incorporating transistors, ICs and embedded processors, they also were on the forefront in developing automatic test equipment. The term automatic test equipment (ATE) encompasses all phases of computer controlled testing. It is based on the integration of instruments, computers and software. These systems generally include five basic elements: control, stimulus, measurement, switching and software. A special interface device or interface test adapter connects the unit under test (UUT) to the ATE. Test program software connects the ATE to the appropriate UUT test points, programs the input stimulus and monitors the output response     

末敏弹减速运动和稳态扫描段运动特性的研究

对末敏弹这一全新反坦克武器在减速运动和稳态扫描段的运动特性进行了仔细的研究。恰当地引入了降落伞的附加质量和附加惯性矩,完整地分析了伞体和弹体所受的外力和外力矩,建立了由伞体和弹体组成的末敏弹系统二体运动模型。编制了完整的计算程序。给出了末敏弹扫描角速度、扫描角和扫描曲线随时间的变化,以及扫描覆盖区随高度的变化。计算结果与试验结果有很好的一致性。该模型可进一步用于末敏弹系统的弹道修正、参数优化和弹道模拟。     

Software architecture requirements for DoD automatic test systems

The DoD has achieved success with recent automatic test equipment (ATE) families, as evidenced by the navy's consolidated automated support system (CASS) and the army's integrated family of test equipment (IFTE) programs. However, as these systems age, the increased requirements for technology insertion due to instrument obsolescence and the demands of advanced electronics are becoming evident. Recent advances in test technology promise to yield reduced total ownership costs (TOC) for ATE which can incorporate the new technology. The DoD automatic test system (ATS) executive agent office (EAO) objective is to significantly reduce total ownership cost. Several objectives have been identified including use of synthetic instruments, support for legacy test product sets (TPSs), and more efficient ways of developing TPSs. The NxTest software architecture will meet the objectives by providing an open systems approach to the system software. This will allow for the incorporation of commercial applications in the TPS development and execution environments and support current advances in test technology