基于常规多普勒滤波器组结构的合成宽带距离像性能分析

为了消除散布效应对宽带信号的不利影响,可以利用多个窄带信号合成宽带信号;同时,通过在子带内处理相干脉冲串,可进行杂波抑制、目标速度估计和区分不同速度的目标。然而,在子带内分别使用常规多普勒滤波器组,会引进多普勒散布效应所造成的输出失配误差,从而造成合成距离像的失真。分析了多普勒散布效应与子带常规多普勒滤波器组输出失配之间的关系,推导了运动目标通过滤波器组后所成高分辨距离像的距离走动公式,给出了适合子带常规多普勒滤波器组的目标速度临界值。仿真实验验证了以上结论。     

基于超短基线声传感器阵的高速目标轨迹估计

针对低空高速飞行目标跟踪问题,首先研究了某典型目标噪声信号的时频特性,发现其信号呈现宽带低频特征,难以从频域对目标轨迹进行估计。在此基础上,从各路接收信号的到达时延量入手,考虑到声基阵只能布设于有限空间内的制约,提出了一种基于超短基线阵时延估计的目标跟踪方法。该方法利用各个超短基线阵接收声强极值点分别估计目标运动轨迹垂线方向,计算多个垂线的叉乘向量实现对目标运动方向的估计,再利用多面交汇的方式获估计得到目标运动轨迹。分别对目标俯仰角、方位角及运动轨迹估计的理论误差进行了推导,根据理论估计误差,为能够实现对目标运动轨迹的估计,各个超短基线阵应尽量保证与目标运动轨迹不在同一平面上。根据仿真结果,在采用4个传感器基阵时,角度估计平均误差在4°以内,位置估计相对误差在5%左右。仿真结果验证了该方法的有效性。     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

Low-cost technology for multimode radar

A flexible test bed radar architecture is described which includes an integrated RF electronics package that can support multiple radar applications, including surveillance, fire control, target acquisition, and tracking. This type of architecture can significantly reduce the cost, power, size, and weight of electronics on future weapon delivery platforms. The Army Research Laboratory (ARL) is developing technology to support multimode radar requirements. These requirements include the detection and location of moving or stationary low radar cross section targets in heavy ground clutter and the classification and/or recognition of these targets. We address these requirements with commercial-off-the-shelf (COTS) products and the integration of several enabling technologies. The test bed radar includes a direct digital synthesizer (DDS) for frequency-diverse waveform generation, a flexible wideband transceiver for bandwidth extension and frequency translation, and an open architecture signal processor with embedded wideband analog-to-digital converters for real-time acquisition and processing. Efficient signal processing algorithms have been developed to demonstrate multimode radar capability. This paper discusses the various subassemblies, algorithm efficiency, and field experiment results     

基于广义Kalman估计的机载雷达高精度控制系统

 研究了在某型现役机载雷达系统中, 采用广义Kalman 滤波器方法来预估目标机的俯仰角和方位角,产生跟踪目标用的雷达天线驱动信号, 替代传统的速率陀螺测量元件来补偿本机机动所造成的扰动的方法,同时对探测信号本身所具有的延迟起到了补偿作用。对目标的运动采用直角坐标系中的Singer 模型描述, 而对测量信号则是应用极坐标系中的描述, 采用广义Kalman 滤波器来完成估计, 即在每一步的估计和控制中对计算测量方程进行线性化结果, 实现两种坐标系的转换。通过应用Matlab/ Simulink 软件对整个系统的建模、设计及仿真研究, 得到了满意的结果。     

一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

一种基于DRFM和数字信道化技术的 宽带雷达目标干扰模拟器设计

提出了一种DRFM和数字信道化技术的宽带雷达目标干扰模拟器设计方案,详细讨论了宽带雷达信号的数字信道化接收算法和基于DRFM的扩展目标/干扰生成方法。仿真分析结果表明,该方案可以实现1 GHz带宽的雷达导引头目标干扰信号模拟,并可推广用于宽带雷达导引头干扰机和宽带雷达导引头数据采集系统设计。     

Range, radial velocity, and acceleration MLE using radar LFM pulsetrain

An efficient implementation of the maximum likelihood estimator (MLE) is presented for the estimation of target range, radial velocity, and acceleration when the radar waveform consists of a wideband linear frequency modulated (LFM) pulse train. Analytic properties of the associated wideband ambiguity function are derived; in particular the ambiguity function, with acceleration set to zero, is derived in closed form. Convexity and symmetry properties of the ambiguity function over range, velocity, and acceleration are presented; these are useful for determining region and speed of convergence for recursive algorithms used to compute the MLE. In addition, the Cramer-Rao bound (CRB) is computed in closed form which shows that the velocity bound is decoupled from the corresponding bounds in range and acceleration. A fast MLE is then proposed which uses the Hough transform (HT) to initialize the MLE algorithm. Monte Carlo simulations show that the MLE attains the CRB for low to moderate signal-to-noise depending on the a priori estimates of range, velocity, and acceleration     

Detection of moving targets in wideband SAR

A likelihood ratio is proposed for moving target detection in a wideband (WB) synthetic aperture radar (SAR) system. WB is defined here as any systems having a large fractional bandwidth, i.e., an ultra wide frequency band combined with a wide antenna beam. The developed method combines time-domain fast backprojection SAR processing methods with moving target detection using space-time processing. The proposed method reduces computational load when sets of relative speeds can be tested using the same clutter-suppressed subaperture beams. The proposed method is tested on narrowband radar data.     

空间自旋目标宽带雷达干涉三维成像方法

空间目标三维成像可为目标的特征提取、分类与识别提供重要依据。基于L型三天线干涉成像原理,提出了一种宽带雷达条件下空间自旋目标干涉三维成像方法。首先,分析了雷达发射线性调频(LFM)信号条件下,空间自旋目标在距离-慢时间平面上的成像特点,建立了基于距离-慢时间平面的空间自旋目标干涉三维成像模型;其次,针对建立的干涉三维成像模型中,不同散射点的回波在距离-慢时间平面上会相互交叠的问题,对回波曲线分离、交叉点处理以及一维距离旁瓣的影响等进行了讨论,并给出了解决方法,从而获得目标三维图像。与已有方法相比,该方法可有效克服单基雷达三维成像无法获得目标各散射点真实三维位置以及在双/多基雷达三维成像时多部雷达回波联合处理较困难的问题。最后,仿真实验结果验证了所提方法的有效性。     

Target tracking with a network of Doppler radars

By observing a Doppler signal at several points in space, it is possible to determine the position, velocity, and acceleration of a moving target. Parameter identification for a constant-acceleration motion model is studied, and the Cramer-Rao bound on motion parameter uncertainty is obtained for phaseand frequency-based estimation strategies, with the result that the preferred strategy depends upon the sensor/target geometry and target motion. Direct identification of the constant-acceleration trajectory model from the Doppler signal requires a 9-dimensional nonlinear optimization. Exploiting symmetry in the sensing geometry, a novel trajectory representation is presented which reduces the nonlinear optimization to one in 3 dimensions, with additional parameters obtained by linear identification. Baseball tracking using a network of four Doppler radars is experimentally demonstrated     

Efficient wideband signal parameter estimation using a radon-ambiguity transform slice

A novel efficient technique based on a single slice Radon-ambiguity transform (RAT) for time-delay and time-scale estimation is proposed. The proposed approach combines the narrowband cross-ambiguity function (NBCAF), the wideband cross-ambiguity function (WBCAF), and a single slice RAT to estimate multiple target parameters in noisy environments. The square modulus of Gaussian-enveloped linear frequency modulated (GLFM) signals has high-energy centrality in the ambiguity plane. Its peaks in the NBCAF fall along nearly straight lines whose slopes depend on the Doppler rates of the moving targets. These lines could be effectively detected by computing the entire Radon transform of the NBCAF for all possible angles; however, it is a computationally intensive procedure. It is shown that without calculating the entire RAT, it is possible to estimate target parameters using only a single slice of the RAT, i.e., using an appropriate projection of the NBCAF. It is demonstrated that the proposed method can successfully separate overlapping targets efficiently. The efficiency is achieved due to fast Fourier transform (FFT)-bascd processing, use of a single slice of RAT, and the use of only one-dimensional (1-D) searches.     

分布式接收宽带多目标信号盲检测迭代处理方法

随着软硬件技术的飞速发展和宽带接收机的广泛使用,频谱检测向着高瞬时带宽的方向发展,传统基于信道化处理的频谱检测方法存在搜索速度慢、处理效率低下的问题。文章提出了 1种新的分布式接收宽带多目标信号盲检测迭代处理方法,在无须预先知道信号数目及信号频谱位置的情况下,能够实现特定虚警概率多信号盲检测,具备较高的灵活性和稳健性。首先,在对信号特征进行分析的基础上,通过构造线性模型,将分布式接收多目标信号检测转化为线性模型求解问题进行处理;然后,基于贝叶斯多参数联合求解模型,在对未知参数先验分布进行合理假设的基础上,推导了各未知参数变分分布及信号检测门限的解析表达式,采用变分分布软信息迭代的方式实现多传感器信号、多参数联合估计,并利用每次迭代参数估计结果,对信号检测门限进行更新,通过置零操作实现预设虚警概率下的多信号盲检测;最后,通过仿真实验对所提方法性能进行了分析,并与相关方法进行了对比。仿真结果表明,所提方法能够有效利用多路接收信号信息,实现宽带未知多目标信号的盲检测,有效提升短数据下的算法处理效能,与现有方法相比,在接收单元数目较多以及信噪比较低时具有明显优势。     

SAR ATR performance using a conditionally Gaussian model

A family of conditionally Gaussian signal models for synthetic aperture radar (SAR) imagery is presented, extending a related class of models developed for high resolution radar range profiles. This signal model is robust with respect to the variations of the complex-valued radar signals due to the coherent combination of returns from scatterers as those scatterers move through relative distances on the order of a wavelength of the transmitted signal (target speckle). The target type and the relative orientations of the sensor, target, and ground plane parameterize the conditionally Gaussian model. Based upon this model, algorithms to jointly estimate both the target type and pose are developed. Performance results for both target pose estimation and target recognition are presented for publicly released data from the MSTAR program     

The Design of Huffman Sequences

The paper presents a method by which the zeros of the polynomial representing a Huffman (impulse-equivalent) pulse sequence can be chosen so as to exert a degree of control on the form of the energy distribution of the signal in the time-frequency plane. This makes it possible to design Huffman pulse sequences which are suitable for use as radar or sonar signals in situations where significant target velocity occurs.     

A Logarithmic Frequency Allocation Algorithm for Wideband Discrete Frequency Pulse Trains

It is shown that signal waveforms utilizing discrete frequency modulation (DFM) which are generated using a narrowband or frequency shift algorithm have ambiguity sidelobe distortion which is caused by the approximation of time compression by frequency shift. A logarithmic frequency allocation algorithm is presented which couches the signal design problem in terms of band and step ratios, rather than in terms of bandwidth and frequency steps, and is consistent with the wideband formulation of the ambiguity function. The algorithm makes use of the same basic code generating sequence used for narrowband frequency allocation, but the resulting signal will have invariant ambiguity sidelobe positions for any receiver realization in the delay-time compression plane.     

Senrad: an advanced wideband air-surveillance radar

The generic characteristics and performance of an experimental long-range air-surveillance radar, known at the Naval Research Laboratory as Senrad, is described. Its distinguishing feature is that it can operate with simultaneous transmissions over a very wide bandwidth-from 850 to 1400 MHz. The technology and type of experimental radar equipment employed are discussed and examples are given of its performance capabilities obtained by means of very wideband operation. The unusually wide bandwidth of this radar allows 1) improved detection and tracking performance because of the absence of the nulls that are common in the antenna elevation radiation-pattern of a single-frequency radar; 2) moving target indication (MTI) without loss of targets due to blind speeds and without the need for multiple PRFs (pulse repetition frequencies); 3) accurate height finding with a fan-beam radar by taking advantage of the multipath time difference as a function of target height; 4) a form of limited target recognition based on high range-resolution; and 5) a reduction of the effectiveness of electronic countermeasures that can seriously degrade more narrowband radars     

Target motion compensation in synthetic aperture radar

In a synthetic aperture radar (SAR) targets on the ground that are moving become smeared as a result of velocity components parallel to the motion of the radar and are moved to radically different angular positions if they have velocity components perpendicular to the motion of the radar. Methods for restoring moving targets to their correct size and position are described. The samples collected for SAR processing are frequency-modulated RF pulses. Mathematically this leads to spectra that are described by Fresnel integrals. For stationary targets, the spectrum is symmetrical around the origin. If there is a moving target in a range cell, its Doppler spectrum will be displaced from the origin and may undergo other changes as a result of its nonzero velocity. Proper compensation to locate the target at the correct position requires that the spectrum be translated to a position dependent on the along-track velocity rather than to the origin. From the central frequency, the along-range velocity component can be estimated and the length of the translation can then be found. After translation, the spectrum is converted back to the time domain and the customary SAR processing is performed     

Time-frequency method for detecting an accelerating target in sea clutter

The authors design a time-frequency (TF) method for use in high-frequency surface-wave radar (HFSWR) for detecting a small accelerating target in sea clutter. The clutter is modelled by pseudo targets moving with Bragg velocity towards and away from the radar. The design is based on the Wigner distribution (WD) defined by Chan (type-III WD, in our terminology) rather than the WD defined by Claasen and Mecklenbrauker (1980) (2times type-I WD, in our terminology). Like the type-I WD, the type-III WD also concentrates a chirp signal onto a straight line in the TF plane. The type-III WD has the following advantages: 1) Its range of unambiguously measurable frequencies (RUMF) is [-pi,pi] rad/s, whereas for the type-I WD the RUMF is [-pi/2,pi/2] rad/s. 2) It allows a target separated from the clutter by pi rad/s to be detected, whereas the type-I WD coalesces such a target with the clutter and thereby mask it. An ambiguity function (AF) was defined corresponding to the type-III WD and use it to derive a smoothed type-III WD that mitigates the clutter. The smoothed type-III WD method is applied to real radar data and shown to be superior to the conventional Fourier transform method. The advantages of the type-III WD over the type-I WD are also demonstrated. The design principles laid out in the paper can also be used to develop a TF method for use in air traffic control radar (ATCR) for detecting an accelerating target in land clutter     

基于空域稀疏性的宽带DOA估计

利用宽带阵列接收信号的空域稀疏性,将宽带信号的波达方向(DOA)估计转化为一个稀疏信号重构的问题,提出了一种新的宽带信号DOA估计算法。该算法将宽带信号分解为多个子带信号,联合利用多个子带信号的空域稀疏性进行重构。它是对用于稀疏重构的标准的稀疏贝叶斯学习算法的推广,可适用于多冗余字典的信号模型。另外,通过对多快拍的阵列接收信号进行奇异值分解(SVD),提取信号子空间作为算法的输入数据,可以在有效减少运算复杂度的同时,提高对噪声的稳健性。与传统的宽带阵列DOA估计方法相比,该算法能够用于低信噪比、快拍有限和信源相关性较高的场合,同时算法的性能对信源个数的估计值不太敏感。仿真实验表明,该算法相对现有的基于子空间类的方法,具有更好的DOA估计性能。