基于时间反转和降阶Keystone的SAR-GMTI快速聚焦方法

对合成孔径雷达（SAR）地面运动目标聚焦技术进行了研究。针对现有运动目标聚焦方法存在的问题,提出了一种基于时间反转和降阶Keystone的SAR地面运动目标检测（SAR-GMTI）快速聚焦方法。首先,根据目标的机动特性建立了3阶距离模型;其次,针对目标多普勒中心模糊引起的多普勒谱分裂现象,结合所提时间反转处理（TRP）和降阶Keystone变换处理估计出运动目标2阶参数。此后,构造2阶相位补偿函数补偿运动目标的2阶距离徙动和多普勒徙动,从而完成运动目标的聚焦。同时,所提方法没有任何参数搜索过程,降低了计算复杂度。最后,仿真实验验证了所提算法的正确性和有效性。     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

SAR极坐标格式成像算法对运动目标响应特性

运动目标的合成孔径雷达（SAR）成像特征是SAR地面运动目标指示（SAR/GMTI）系统进行运动目标检测、成像和重定位的基础。为此,从信号二维解耦合校正距离徙动角度推导和分析了极坐标格式算法（PFA）对运动目标的响应特性,揭示了极坐标格式转换过程中的距离插值和方位插值对运动目标距离徙动的校正原理。理论分析表明：PFA在完成对静止目标成像的同时,还能够自动校正所有运动目标的线性距离徒动,且校正过程无需目标运动信息,因此对于径向运动目标,在忽略波前弯曲条件下PFA也能够对其进行完全聚焦。最后,通过仿真数据处理对理论分析结果进行了验证,表明PFA作为一种运动目标成像预处理方法具有很大的应用前景。     

Detecting moving targets in SAR imagery by focusing

A new method for detecting moving targets in a synthetic aperture radar (SAR) image is presented. It involves segmenting a complex-valued SAR image into patches, focusing each patch separately, and measuring the sharpness increase in the focused patch. The algorithm is sensitive to azimuth velocities and is exquisitely sensitive to radial accelerations of the target, allowing it to detect motion in any direction. It is complementary to conventional Doppler-sensing moving target indicators, which can sense only the radial velocity of rapidly moving targets.     

利用分数阶Fourier域滤波的机载SAR多运动目标检测

 强度相差较大的多运动目标检测是机载合成孔径雷达 ( SAR)技术的一个重点和难点,传统的频域滤波和现代的时频分布方法都无法解决这个问题。首先分析了机载 SAR运动目标回波本质上为线性调频信号,据此提出一种基于分数阶 Fourier域滤波的运动目标检测新方法,并且应用逐次消去的思想有效地解决了强度相差较大的多目标检测问题。仿真的结果验证了算法的有效性。     

Moving target imaging algorithm for SAR data

A digital processing algorithm for fine-resolution imaging of synthetic aperture radar (SAR) moving targets is described. The targets may have any translational and rotational motion components relative to the data collection platform. The algorithm requires the presence of up to three prominent points in the image of the target; the signals from these points provide estimates of the unknown target motion parameters. Phase compensation and data formatting based on these estimates eliminate motion-induced phase errors. This algorithm has been implemented on a VAX computer and used to process both simulated and real SAR data of moving targets. Results obtained using the simulated data are presented     

Moving Targets Processing in SAR Spatial Domain

This paper presents a novel technique to estimate the initial coordinates and velocity vector of moving targets, including those with velocities above the Nyquist limit, using a single synthetic aperture radar (SAR) sensor without increasing the pulse repetition frequency (PRF). The basic reasoning is that, although the returned echoes may be undersampled in the azimuth direction, their phase and amplitude are informative with respect to the moving target trajectory parameters. Therefore, the so-called blind angle ambiguity, inherent to systems using a single SAR sensor, is overcome. The proposed method samples the data in the spatial domain, along the signature curve which depends on the moving target trajectory parameters. The resulting algorithm is a highly efficient (from the computational point of view) ID matched filter. The effectiveness of the proposed scheme is illustrated using simulated SAR data and real data from the MSTAR public release data set, corresponding to a static SAR scene and a static BTR-60 with simulated motion.     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

Automatic target recognition of time critical moving targets using1D high range resolution (HRR) radar

Synthetic Aperture Radar (SAR) imaging and Automatic Target Recognition (ATR) of moving targets pose a significant challenge due to the inherent difficulty of focusing moving targets. As a result, ATR of moving targets has recently received increased interest. High Range Resolution (HRR) radar mode offers an approach for recognizing moving targets by forming focused HRR profiles with significantly enhanced target-to-(clutter+noise) (T/(C+N)) via Doppler filtering and/or clutter cancellation. A goal of HRR ATR transition is the implementation and evaluation of algorithms exhibiting robustness under extended operating conditions (EOC). The public domain Moving and Stationary Target Acquisition and Recognition (MSTAR) data set was used to study 1D template-based ATR development and performance. Due to the unavailability of a statistically significant moving ground target data set, this approach was taken as an interim step in assessing the separability of ground targets when using range only discriminants. This report summarizes the data and algorithm methodology, simulated performance results, and recommendations     

Feature enhancement and ATR performance using nonquadratic optimization-based SAR imaging

We present an evaluation of the impact of a recently proposed synthetic aperture radar (SAR) imaging technique on feature enhancement and automatic target recognition (ATR) performance. This image formation technique is based on nonquadratic optimization, and the images it produces appear to exhibit enhanced features. We quantify such feature enhancement through a number of criteria. The findings of our analysis indicate that the new feature-enhanced SAR image formation method provides images with higher resolution of scatterers, and better separability of different regions as compared with conventional SAR images. We also provide an ATR-based evaluation. We run recognition experiments using conventional and feature-enhanced SAR images of military targets, with three different classifiers. The first classifier is template based. The second classifier makes a decision through a likelihood test, based on Gaussian models for reflectivities. The third classifier is based on extracted locations of the dominant target scatterers. The experimental results demonstrate that the new feature-enhanced SAR imaging method can improve the recognition performance, especially in scenarios involving reduced data quality or quantity.     

FrFT-CSWSF:Estimating cross-range velocities of ground moving targets using multistatic synthetic aperture radar

Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small compared with that of the satellite, it is difficult to correctly estimate it using a conventional monostatic platform algorithm. To overcome this problem, a novel method employing multistatic SAR is presented in this letter. The proposed hybrid method, which is based on an extended space-time model（ESTIM） of the azimuth signal, has two steps： first, a set of finite impulse response（FIR） filter banks based on a fractional Fourier transform（FrFT） is used to separate multiple targets within a range gate; second, a cross-correlation spectrum weighted subspace fitting（CSWSF） algorithm is applied to each of the separated signals in order to estimate their respective parameters. As verified through computer simulation with the constellations of Cartwheel, Pendulum and Helix, this proposed time-frequency-subspace method effectively improves the estimation precision of the cross-range velocities of multiple targets.     

High Range Resolution Profiles as Motion-Invariant Features for Moving Ground Targets Identification in SAR-Based Automatic Target Recognition

A quantitative model analysis is presented to justify the extraction of high range resolution (HRR) profiles from synthetic aperture radar (SAR) images as motion-invariant features for identifying moving ground targets. A comparative study is conducted to assess the effectiveness in the identification process between using HRR profiles and SAR images as target signatures. The results indicate that HRR profiles are just as viable as SAR image for identification. Furthermore, a score-level multi-look fusion identification method has been investigated. It is found that a correct accurate identification rate of greater than 99 percent, a low false alarm rate, and a high level of identification confidence can be achieved, providing very robust performance.     

Multiple moving target feature extraction for airborne HRR radar

This study considers the clutter suppression and feature extraction of multiple moving targets for airborne high range resolution (HRR) phased array radar. To avoid the range migration problems that occur in the HRR radar data, we divide each HRR profile into nonoverlapping low range resolution segments. No information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector auto-regressive filtering technique to suppress the clutter. Then a relaxation-based parameter estimation algorithm is presented for multiple moving target feature extraction. Numerical results are given to demonstrate the effectiveness of the algorithm     

一种孔径和频率二维稀疏的步进频SAR成像方法

 步进频率信号(SFWs)在不增加雷达系统瞬时带宽的情况下能够获得高的距离向分辨率的同时,也存在着抗干扰能力较差及其等效重复频率较低的问题,并且在方位向积累时间内由于雷达载机工作状态的变化,会导致方位向的数据录取不完整。针对上述问题,提出一种孔径和频率二维稀疏的步进频合成孔径雷达(SAR)成像方法。首先,分析了稀疏步进频率信号(SSFWs)的SAR成像模型,然后基于压缩感知理论完成距离向成像处理。其次,针对稀疏孔径的回波数据,通过构造成像算子和压缩感知重建模型的方法实现其距离徙动校正和方位压缩处理,进而获得二维成像结果。相比于传统的步进频率信号SAR成像,利用所提方法能够在少量的频率资源和雷达回波数据情况下实现准确的SAR成像。最后,通过对仿真和实测的步进频率雷达数据进行成像处理,验证了所提方法的有效性和可行性。     

A low-cost space-based radar system concept

A space-based radar system concept is described that can provide continuous world-wide, all-weather, day-night observation and tracking of ships, aircraft, vehicles and ground facilities of interest. The system employs a constellation of radar satellites in low-earth orbit to provide continuous world-wide target access. The radars employ reflector antennas, TWT transmitters and high frequency (e.g., X band) to achieve long range with relatively low weight, complexity and cost. The radars operate in moving-target-detection (MTD) and synthetic-aperture-radar (SAR) spotlight imaging modes to observe moving and fixed targets, respectively. The system could support a wide range of military, intelligence, law-enforcement and civilian missions     

A Velocity Estimation Algorithm of Moving Targets using Single Antenna SAR

A new algorithm is proposed for velocity estimation of moving targets in single antenna synthetic aperture radar (SAR). Based on the fact that different velocity vectors cause different geometrical figures of the two-dimensional (2-D) signature in the range-Doppler (RD) domain, this algorithm estimates the azimuth and range velocities by a 2-D search such that the range cell migration correction (RCMC) and the second range compression (SRC) are correctly performed. It is shown that, using the proposed algorithm, the Doppler ambiguity problem can be avoided and satisfactory accurate velocity estimation can be obtained in high signal-to-clutter ratio (SCR) scenarios.     

Target motion compensation in synthetic aperture radar

In a synthetic aperture radar (SAR) targets on the ground that are moving become smeared as a result of velocity components parallel to the motion of the radar and are moved to radically different angular positions if they have velocity components perpendicular to the motion of the radar. Methods for restoring moving targets to their correct size and position are described. The samples collected for SAR processing are frequency-modulated RF pulses. Mathematically this leads to spectra that are described by Fresnel integrals. For stationary targets, the spectrum is symmetrical around the origin. If there is a moving target in a range cell, its Doppler spectrum will be displaced from the origin and may undergo other changes as a result of its nonzero velocity. Proper compensation to locate the target at the correct position requires that the spectrum be translated to a position dependent on the along-track velocity rather than to the origin. From the central frequency, the along-range velocity component can be estimated and the length of the translation can then be found. After translation, the spectrum is converted back to the time domain and the customary SAR processing is performed     

一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

A novel visual attention method for target detection from SAR images

Synthetic Aperture Radar(SAR) imaging systems have been widely used in civil and military fields due to their all-weather and all-day abilities and various other advantages. However, due to image data exponentially increasing, there is a need for novel automatic target detection and recognition technologies. In recent years, the visual attention mechanism in the visual system has helped humans effectively deal with complex visual signals. In particular, biologically inspired top-down attention models have garnered much attention recently. This paper presents a visual attention model for SAR target detection, comprising a bottom-up stage and top-down process.In the bottom-up step, the Itti model is improved based on the difference between SAR and optical images. The top-down step fully utilizes prior information to further detect targets. Extensive detection experiments carried out on the benchmark Moving and Stationary Target Acquisition and Recognition(MSTAR) dataset show that, compared with typical visual models and other popular detection methods, our model has increased ability and robustness for SAR target detection, under a range of Signal to Clutter Ratio(SCR) conditions and scenes. In addition, results obtained using only the bottom-up stage are inferior to those of the proposed method, further demonstrating the effectiveness and rationality of a top-down strategy. In summary, our proposed visual attention method can be considered a potential benchmark resource for the SAR research community.     

Emulating Dynamic Target in Compact Radar Ranges. Part I: Theory

Analytical expressions are developed that describe the artifacts encountered when translating, rotating, and vibrating point sources are imaged by compact radar ranges (CRRs) emulating airborne synthetic-aperture radar (SAR). The approach starts with coherent-aperture imaging basics and develops a general solution for imaging using the Born approximation. We show that moving-target artifacts on CRRs are similar to the artifacts encountered with SAR moving targets, suggesting that CRRs may be suitable for such emulations.