共查询到19条相似文献,搜索用时 140 毫秒
1.
根据高温合金的切削性能,确定刀具结构、刀具角度、刀具材料和切削用量。通过多次实验建立高温合金切削力经验公式,并与切45~#钢的经验公式对比,证明商温合金的切削力比切45~#钢大43%左右。 相似文献
2.
3.
4.
本文对Ti-1023钛合金的切削现象以及车削过程进行了系统的实验研究,建立了Ti-1023的切削力和切削速度的经验公式,推荐了合理的车削参数 相似文献
5.
6.
使用聚晶金刚石(PCD)刀具并采用正交试验设计法,对含不同体分比的碳化硅颗粒增强铝基复合材料(SiCp/2009Al)进行高速铣削试验。在测量切削力和切屑厚度的基础上,建立了剪切角、剪切应力和摩擦角的预测模型,并结合金属切削基本理论公式建立了切削力的预测模型。该模型包含铣削速度、每齿进给量、径向切宽、增强颗粒体分比等重要参数,模型对进给方向最大铣削力预测值的平均误差为5.9%,对铣刀径向切深方向最大铣削力预测值的平均误差为9.2%,皆高于普通经验公式的预测精度,从而可对SiCp/2009Al复合材料高速铣削时的铣削力进行有效预测。 相似文献
7.
铣削加工技术是加工航空航天中薄壁件及复杂曲面零件的关键技术之一,可以实现复杂曲面零件高精度、高质量及高效率成形。作为铣削加工的重要现象之一,切削力直接影响刀具的磨损、变形,以及工件的加工效率和质量,为了能够更好地利用切削技术,有必要对切削力的预测进行回顾分析研究。作为铣削力预测技术的关键手段,基于经验的铣削力模型被广泛应用。因此,本研究总结分析了当前关于基于经验的切削力预测技术,综述了切削力系数、未变形切屑厚度、刀具跳动和变形对切削力的影响规律,以期对切削加工质量提供有益参考,最后对该领域未来研究的方向进行了思考。 相似文献
8.
9.
铍材作为一种典型难加工材料,其加工方式主要为车削,但铍材较硬较脆,经常会出现局部断裂以及锐边崩边的缺陷;切削力作为影响刀具磨损以及加工质量的重要因素,预测车削铍材的切削力对选取切削参数具有十分重要的意义。本文基于力学分析的半经验预测公式建立了一种基于热力耦合的铍材车削切削力预测模型,并进行了试验验证。结果发现,模型预测值与试验值数值拟合良好,整体误差为10.79%,误差范围为2.96%~20.53%。研究分析了不同切削参数下刀具磨损以及表面粗糙度的变化机理,为铍材车削加工提供一定的理论参考。 相似文献
10.
SiC晶须增强铝复合材料的切削力研究 总被引:1,自引:0,他引:1
通过SiCw/2024铝复合材料的车削试验,得出了不同刀具材料,不同切削用量对切削力的影响规律,并指出用PDC切削力最小。 相似文献
11.
An improved method to determine cutting force coefficients for bull-nose cutters is proposed based on the semi-mechanistic cutting force model. Due to variations of cutting speed along the tool axis in bull-nose milling, they affect coefficients significantly and may bring remarkable discrepancies in the prediction of cutting forces. Firstly, the bull-nose cutter is regarded as a finite number of axial discs piled up along the tool axis, and the rigid cutting force model is exerted. Then through discretization along cutting edges, the cutting force related to each element is recalculated, which equals to differential force value between the current and previous elements. In addition, coefficient identification adopts the cubic polynomial fitting method with the slice elevation as its horizontal axis. By calculating relations of cutting speed and cutting depth, the influences of speed variations on cutting force can be derived. Thereby, several tests are conducted to calibrate the coefficients using the improved method, which are applied to later force predictions. Eventually, experimental evaluations are discussed to verify the effectiveness. Compared to the conventional method, the results are more accurate and show satisfactory consistency with the simulations. For further applications, the method is instructive to predict the cutting forces in bull-nose milling with lead or tilt angles and can be extended to the selection of cutting parameters. 相似文献
12.
13.
螺旋铣削加工工艺具有降低轴向力,改善排屑、散热条件等优点,螺旋铣削力是其重要过程指标之一。对单向CFRP螺旋铣削力建模方法展开研究,预测给定加工参数下的螺旋铣削力。首先,通过对螺旋铣削过程进行运动学分析和切屑几何分析,建立了螺旋铣削过程中侧刃、底刃动态切屑层模型,纤维切削方向角度模型和动态切削力计算模型。然后,分别通过侧刃直线槽铣实验和底刃半齿插铣实验,对各个切削方向角度下侧刃、底刃切削力系数进行了标定,并利用人工神经网络对切削力系数进行拟合。最后,将标定所得的切削力系数代入动态切削力计算模型中,建立了单向CFRP螺旋铣削过程动态切削力预测模型,并通过实验验证了模型的准确性。与现有模型相比,该模型不仅能够预测刀具螺旋运动周期内的切削力变化情况,还可以对每个刀具自转周期内的细节进行预测,通过考虑纤维切削方向角度对切削力系数的影响,反映了单向CFRP材料的各向异性,较为准确地预测了螺旋铣削力。 相似文献
14.
15.
超声振动方向对TC4钛合金铣削特性的影响 总被引:1,自引:2,他引:1
为充分发挥超声铣削钛合金的优势,改善钛合金的加工效果,增强表面服役性能,分别对刀具和工件施加超声振动,以寻求合适的振动方向和加工参数。理论推导了侧刃断续切削时的临界速度,试验研究了不同振幅和切削速度对表面形貌、切屑形态、切削力和刀具磨损的影响,同时探究了表面微织构对摩擦特性的影响。试验表明在两种振动方向下,增大振幅均使切屑的锯齿化程度降低,并且增加轴向振幅可使锯齿形切屑转变为带状切屑。轴向振动更有利于表面形成微织构、减小切削力、减缓刀具磨损、减小工件摩擦时的磨合时间,但需合理控制切削速度和超声振幅。同时,对切削力进行频谱分析,为工作状态下超声振动频率的测量提供了一种参考方法。 相似文献
16.
建立了振动切削中切削力的数学模型,进行振动切削中频率对切削力影响机理的研究,并通过数值模拟的方法,首次从理论上给出精密振动切削中频率对切削力的影响规律。同时,还研究了在不同的振动切削条件下,切削力随切削参数变化的变化规律。 相似文献
17.
本文用最大误差方法,对固体火箭发动机六分力立式试验台的静态误差进行了分析.分析结果是,其静态误差主要来源于动架纵轴的调整.并建立了发动机推力偏心距和推力偏心角的静态误差计算公式.文中也谈到减小立式试验台静态误差的调整方法. 相似文献
18.
A deduced cutting force prediction model for circular end milling process is presented in this paper. Traditional researches on cutting force model usually focus on linear milling process which does not meet other cutting conditions, especially for circular milling process. This paper presents an improved cutting force model for circular end milling process based on the typical linear milling force model. The curvature effects of tool path on chip thickness as well as entry and exit angles are analyzed, and the cutting force model of linear milling process is then corrected to fit circular end milling processes. Instantaneous cutting forces during circular end milling process are predicted according to the proposed model. The deduced cutting force model can be used for both linear and circular end milling processes. Finally, circular end milling experiments with constant and variable radial depth were carried out to verify the availability of the proposed method. Experiment results show that measured results and simulated results corresponds well with each other. 相似文献