区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

Analysis of array errors and a short-time processor in airbornephased array radars

Array errors are inherent in a realistic phased array radar system. The influence of array errors on the clutter degrees of freedom and the clutter subspace in an airborne phased array radar is analyzed. Based on the presented theoretic results, a method of short-time processing followed by coherent integration is proposed for clutter suppression in airborne phased array radars. It can approximate the two-dimensional optimal processor well even in the presence of array errors, clutter fluctuations and aircraft drift, with a considerable saving in computations     

Nonparametric rank detectors under K-distributed clutter in radar applications

This correspondence deals with a comparative analysis of parametric detectors versus rank ones for radar applications, under K-distributed clutter and nonfluctuating and Swerling II target models. We show that the locally optimum detectors (LODs) (optimum for very low signal-to-clutter ratio (SCR)) under K-distributed clutter are not practical detectors; on the contrary, asymptotically optimum detectors (optimum for high SCR) are the practical ones. The performance analysis of the parametric log-detector and the nonparametric (linear rank) detector is carried out for independent and identically distributed (IID) clutter samples, correlated clutter samples, and nonhomogeneous clutter samples. Some results of Monte Carlo simulations for detection probability (P/sub d/) versus SCR are presented in curves for different detector parameter values.     

Analysis of CA-CFAR processors for linear-law detection

A method for evaluating the performance of cell-averaging constant false alarm rate (CA-CFAR) processors which use the amplitude of echo signals rather than their squared amplitude is presented. Results for the case of Rayleigh clutter/noise statistics are given. Detection probabilities are evaluated for the case of a Rayleigh fluctuating target embedded in Rayleigh clutter/noise for linear-law CA-CFAR processors. These results are observed to be practically identical to those of square-law CA-CFAR processors for which analytical expressions are readily available. These observations are verified using Monte Carlo simulations. The same conclusion is reached in the case of a nonfluctuating target embedded in Rayleigh clutter/noise for which only simulation results are presented     

Testing the Independence of Nonhomogeneous Rayleigh Clutter

Two attractive real-time implementation tests are presented that discriminate between correlated and uncorrelated clutter. A clutter model is assumed in which the envelope distribution within a cell is Rayleigh, but the mean clutter level fluctuates from cell to cell. Both the tests utilize observations made in pairs on two clutter envelopes corresponding to two consecutive azimuth sweeps. The results are applicable to real-time testing of the effectiveness of various decorrelation techniques employed by radar systems.     

A Generalized Clutter Computation Procedure for Airborne Pulse Doppler Radars

A general procedure for analyzing ground clutter effects in airborne pulse Doppler radars is described. The quantity computed is the expected clutter power at the output of any specified range gate/ Doppler filter processing cell. The procedure has been computerized and is quite general with respect to antenna gain pattern, clutter cross section variation, PRF, pulse and range gate shapes, and the various receiver processing functions. It is applicable only to distributed ground clutter and linear processing, and excludes the dynamic effects of continuous antenna scanning. To exemplify the use of the procedure, two studies conducted for a postulated high PRF radar are described, and the results are presented.     

Correlated K-distributed clutter generation for radar detection andtrack

The generation of correlated vectors for non-Gaussian clutter is considered for log normal, Weibull, and K-probability distributions. Previous results for log normal and Weibull distributions are summarized. Expressions for the probability distributions and moments of K-distributed clutter of any correlation are derived. Procedures for forming samples of each type of clutter are shown to be equivalent to passing white Gaussian noise through a linear filter followed by a nonlinear operation. Curves of correlation coefficients necessary for the simulation of these vectors are presented for each distribution     

An effect of range-heterogeneous clutter on adaptive Dopplerfilters

The practical implementation of adaptive Doppler filters requires estimates of clutter parameters to determine the adaptive weights. A method of deriving the estimate via the sample matrix inversion (SMI) algorithm using multiple data snapshots from adjacent range cells is presented. For homogeneous clutter environments, the results of this technique asymptotically approach the optimum (a priori known covariance matrix) as the number of snapshots approaches infinity; this asymptotic behavior does not occur for heterogeneous clutter environments. An equation for the decrease in improvement factor is derived. To promote understanding, the simplified special case of narrowband clutter is considered in detail. In almost all cases, the loss is small     

Biparametric CFAR procedures for lognormal clutter

The authors consider procedures for constant false alarm rate in lognormal clutter, accounting for variations of both the scale and a shape parameter of the clutter. Adaptivity to both parameters is obtained through biparametric estimation based on a sliding window surrounding the radar cell under test. Some procedures exploiting best linear unbiased estimation (BLUE) are presented and compared to a previous procedure called Log-t, which uses maximum likelihood estimation (MLE). The comparison is carried on for both a homogeneous clutter environment and for instances of inhomogeneous environment (clutter edges and spurious targets). In the latter instances, some advantages of BLUE procedures which stem from the opportunity of censoring are highlighted     

基于先验门限优化准则的探测阈值自适应选择

针对 2维测量和 4 -sigma确认门 ,把先验检测门限优化准则和修正 Riccati方程的解析近似表示相结合 ,得到了在瑞利起伏环境下使跟踪性能优化的信号探测阈值解析表示式 ,从而使在线求解自适应信号探测阈值能比较容易地实现。通过研究和仿真发现 :在滤波稳定阶段 ,本文给出的自适应信号检测门限方法的跟踪性能优于固定虚警率方法的跟踪性能 ;基于先验检测门限优化准则实现检测 -跟踪的联合优化要求信噪比要大于一定的门限 ,在瑞利起伏环境下 ,对 2维测量和 4 -sigma确认门 ,该门限为 1 .57     

Adaptive Radar Detection in Doubly Nonstationary Autoregressive Doppler Spread Clutter

The problem of adaptive radar detection in clutter which is nonstationary both in slow and fast time is addressed. Nonstationarity within a coherent processing interval (CPI) often precludes target detection because of the masking induced by Doppler spreading of the clutter. Across range bins (i.e., fast time), nonstationarity severely limits the amount of training data available to estimate the noise covariance matrix required for adaptive detection. Such difficult clutter conditions are not uncommon in complex multipath propagation conditions where path lengths can change abruptly in dynamic scenarios. To mitigate nonstationary Doppler spread clutter, an approximation to the generalized likelihood ratio test (GLRT) detector is presented wherein the CPI from the hypothesized target range is used for both clutter estimation and target detection. To overcome the lack of training data, a modified time-varying autoregressive (TVAR) model is assumed for the clutter return. In particular, maximum likelihood (ML) estimates of the TVAR parameters, computed from a single snapshot of data, are used in a GLRT for detecting stationary targets in possibly abruptly nonstationary clutter. The GLRT is compared with three alternative methods including a conceptually simpler ad hoc approach based on extrapolation of quasi-stationary data segments. Detection performance is assessed using simulated targets in both synthetically-generated and real radar clutter. Results suggest the proposed GLRT with TVAR clutter modeling can provide between 5–8 dB improvement in signal-to-clutter plus noise ratio (SCNR) when compared with the conventional methods.     

Stap using knowledge-aided covariance estimation and the fracta algorithm

In the airborne space-time adaptive processing (STAP) setting, a priori information via knowledge-aided covariance estimation (KACE) is employed in order to reduce the required sample support for application to heterogeneous clutter scenarios. The enhanced FRACTA (FRACTA.E) algorithm with KACE as well as Doppler-sensitive adaptive coherence estimation (DS-ACE) is applied to the KASSPER I & II data sets where it is shown via simulation that near-clairvoyant detection performance is maintained with as little as 1/3 of the normally required number of training data samples. The KASSPER I & II data sets are simulated high-fidelity heterogeneous clutter scenarios which possess several groups of dense targets. KACE provides a priori information about the clutter covariance matrix by exploiting approximately known operating parameters about the radar platform such as pulse repetition frequency (PRF), crab angle, and platform velocity. In addition, the DS-ACE detector is presented which provides greater robustness for low sample support by mitigating false alarms from undernulled clutter near the clutter ridge while maintaining sufficient sensitivity away from the clutter ridge to enable effective target detection performance     

Airborne adaptive MTI scheme with preventing the whitening of thetarget

A new airborne MTI scheme that applies to non-homogeneous clutter environment is presented. Results of simulation have proved that the scheme has a superior ground clutter suppression performance and can effectively prevent the whitening of a target     

An Adaptive MTI for Weather Clutter Suppression

A digital realization of an adaptive clutter-locking loop is presented. The purpose of the loop is to estimate the mean Doppler frequency of the clutter. The clutter spectrum is then shifted toward the zero Doppler by this estimate. A fixed moving target indicator (MTI) canceler following the loop suppresses the shifted clutter. Experimental simulations illustrate the feasibility of the loop. Results indicate that the proposed canceler works significantly better than a fixed canceler, while not as well as the 10-pulse moving target detector (MTD) processor. However, the complexity of the MTD is significantly more than the relatively simple adaptive processor presented here.     

基于约束序贯M估计的时空域融合红外杂波抑制

针对红外弱小目标检测中的强背景杂波干扰抑制问题进行研究,提出了一种基于参数约束序贯M估计的时空域融合自适应杂波抑制算法.该算法首先在分析序列图像帧间失配的基础上建立了一种改进的时空域融合背景预测模型,结合二维离散傅里叶快速变换图像配准和双线性插值方法进行灰度值估计;然后,基于约束序贯M估计方法进行模型参数的自适应估计,...     

Sum-difference Reduced-dimensional Processing in SAR Image Domain and Statistical Analysis for Ground Moving Target Indication

In this article, a new reduced-dimensional adaptive processing algorithm based on joint pixels sum-difference data for clutter rejection is proposed. The sum-difference data are obtained by orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multi-satellite radar system. In the sense of statistical expectation, the sum-differ- ence data contain the common and different information of the SAR images. Therefore, the objective of clutter cancellation can be achieved by adaptive processing. Moreover, based on the residual image after clutter rejection, statistical analysis of constant false-alarm rate (CFAR) detection of moving targets is also presented. Simulation results demonstrate the effectiveness and robustness of the proposed algorithm even with heterogeneous clutter and image co-registration error.     

Improvement Factor of the Phase-Sensitive Noncoherent MTI

The phase-sensitive noncoherent MTI detects targets by relative motion between the target and an extended clutter background. In this type of MTI, the phase of the target is compared with the phase of the clutter in an adjacent range bin. Theoretical analysis of the system's performance is presented. The improvement factors for single- and double-delay periodic filters are derived and computational results are included.     

Threshold Control for Automatic Detection in Radar Systems

In automatic detection in radar systems an estimate of background clutter power is used to set the detection threshold. Usually detection cells surrounding the cell under test for the presence of a target are used to estimate the clutter power. In the research reported herein, the target location is taken to be uncertain and thus returns from a target could corrupt this clutter power estimate. It is shown how the threshold should be varied to compensate for the resulting degradation in detection performance. The threshold control procedure is based on a priori information about target location that could be supplied by the radar's tracking system. In addition, a simple procedure for calculating detection and false alarm probabilities for Swerling II target models is presented.     

High resolution radar clutter statistics

The generalized compound probability density function (GC-pdf) is presented for modeling high resolution radar clutter. In particular, the model is used to describe deviation of the speckle component from the Rayleigh to Weibull or other pdfs with longer tails. The GC-pdf is formed using the generalized gamma (GΓ) pdf to describe both the speckle and the modulation component of the radar clutter. The proposed model is analyzed and thermal noise is incorporated into it. The validation of the GC-pdf with real data is carried out employing the statistical moments as well as goodness-of-fit tests. A large variety of experimental data is used for this purpose. The GC-pdf outperforms the K-pdf in modeling high resolution radar clutter and reveals its structural characteristics     

Robust range alignment algorithm via Hough transform in an ISARimaging system

The inverse synthetic aperture radar (ISAR) algorithm for imaging objects moving in a straight line requires range alignment as a preprocessing step since scatterers migrate through the various range bins. The conventional correlation alignment method fails when applied in ground scenarios like an airport due to the clutter environment. A procedure using Hough Transform (HT) alignment is presented which overcomes this disadvantage and provides information for clutter elimination