An Analysis of the Low-Frequency Component in Measurements of Angular Velocity and Microacceleration onboard the Foton-12 Satellite

We compare the results of two methods used to determine the angular velocity of the Foton-12 satellite and the low-frequency component of microaccelerations onboard it. The first method is based on reconstruction of the satellite's rotational motion using the data of onboard measurements of the strength of the Earth's magnetic field. The motion (time dependence of the orientation parameters and angular velocity) was found from the condition of best approximation of the measurement data by the functions calculated along the solutions to equations of attitude motion of the satellite. The solutions found were used to calculate the quasistatic component of microaccelerations at certain points of the satellite, in particular, at the point of location of an accelerometer of the QSAM system. Filtration of the low-frequency component of the angular velocity and microacceleration from the data of measurements by a sensor of angular velocity and by the accelerometer of this system served as a second method. The filtration was made using the discrete Fourier series. A spectral analysis of the functions representing the results of determining the angular velocity and microacceleration by both methods is performed. Comparing the frequencies and amplitudes of the harmonic component of these functions allowed us to estimate the accuracy of measurements made by the QSAM system in the low-frequency range.     

Study of microaccelerations onboard the <Emphasis Type="Italic">International Space Station</Emphasis> with the DAKON-M convection sensor

The results of experiments with the DAKON-M convection sensor onboard the Russian orbital segment of the International Space Station are described. A comparison of the sensor measurements with the results of calculation of the quasistatic microacceleration component at the point of installation is made. For this comparison we have used three measurement intervals of the experiments in 2009, during which spacecraft were docked with the station, undocked from it, and actuation of jet engines of the attitude control system took place. When calculating microacceleration, we use the measurement data of the low-frequency MAMS accelerometer, installed on the American segment, and the telemetry data on the ISS rotational motion. This information allowed one to convert the MAMS measurements to the point of installation of the DAKON-M convection sensor. A comparison of sensor measurements with calculated microaccelerations showed sufficiently accurate coincidence between the calculated and measured data.     

The Mode of Gravitational Orientation for the International Space Station

The results of the determination of the uncontrolled attitude motion of the International Space Station during its unmanned flight in 1999 are presented. The data of onboard measurements of three components of the angular velocity are used for this determination. These data covering an interval of slightly less than one orbit were jointly processed by the least squares method, by integrating the equations of motion of the station relative to its center of mass. As a result of this processing, the initial conditions of the motion and the parameters of the mathematical model used were estimated. The actual motion of the station has been determined for 20 such intervals during April–November. Throughout these intervals, the station rotated about the axis of the minimum moment of inertia, the latter executing small oscillations relative to the local vertical. Such a mode, known as the mode of gravitational orientation of a rotating satellite or the mode of generalized gravitational orientation, was planned before the flight. The measurements were made to verify it. The quasistatic component of the microaccelerations aboard the station is estimated for this mode.     

Determination of the Microacceleration Quasisteady Component onboard the International Space Station

A comparison of two methods of determination of the microacceleration quasisteady component arising onboard the International Space Station was performed. In the first method the acceleration was calculated using the relative motion of the station reconstructed on the basis of telemetry data. The second method was a direct measurement of the microacceleration by a low-frequency accelerometer and a smoothing of the data obtained. The used measurements were made by the American accelerometer MAMS. The above comparison can theoretically be used to refine the position of the station center of mass relative to its body.     

Analysis of Low-Frequency Microaccelerations onboard the Foton-11Satellite

The method and the results of investigating the low-frequency component of microaccelerations onboard the Foton-11satellite are presented. The investigation was based on the processing of data of the angular velocity measurements made by the German system QSAM, as well as the data of measurements of microaccelerations performed by the QSAM system and by the French accelerometer BETA. The processing was carried out in the following manner. A low-frequency (frequencies less than 0.01 Hz) component was selected from the data of measurements of each component of the angular velocity vector or of the microacceleration, and an approximation was constructed of the obtained vector function by a similar function that was calculated along the solutions to the differential equations of motion of the satellite with respect to its center of mass. The construction was carried out by the least squares method. The initial conditions of the satellite motion, its aerodynamic parameters, and constant biases in the measurement data were used as fitting parameters. The time intervals on which the approximation was constructed were from one to five hours long. The processing of the measurements performed with three different instruments produced sufficiently close results. It turned out to be that the rotational motion of the satellite during nearly the entire flight was close to the regular Eulerian precession of the axially symmetric rigid body. The angular velocity of the satellite with respect to its longitudinal axis was about 1 deg/s, while the projection of the angular velocity onto the plane perpendicular to this axis had an absolute value of about 0.2 deg/s. The magnitude of the quasistatic component of microaccelerations in the locations of the accelerometers QSAM and BETA did not exceed 5 × 10^–5–10^–4m/s²for the considered motion of the satellite.     

Uncontrolled Attitude Motion of the Foton-12 Satellite and Quasi-Steady Microaccelerations onboard It

The results of determination of the uncontrolled attitude motion of the Foton-12 satellite (placed in orbit on September 9, 1999, terminated its flight on September 24, 1999) are presented. The determination was carried out by the onboard measurement data of the Earth's magnetic field strength vector. Intervals with a duration of several hours were selected from data covering almost the entire flight. On each such interval the data were processed simultaneously using the least squares method by integrating the satellite's equations of motion with respect to the center of mass. The initial conditions of motion and the parameters of the mathematical model employed were estimated in processing. The results obtained provided for a complete representation of the satellite's motion during the flight. This motion, beginning with a small angular velocity, gradually sped up. The growth of the component of the angular velocity with respect to the longitudinal axis of the satellite was particularly strong. During the first several days of the flight this component increased virtually after every passage through the orbit's perigee. As the satellite's angular velocity increased, its motion became more and more similar to the regular Euler precession of an axisymmetric rigid body. In the last several days of flight the satellite's angular velocity with respect to its longitudinal axis was about 1 deg/s and the projection of the angular velocity onto the plane perpendicular to this axis had a magnitude of approximately 0.15 deg/s. The deviation of the longitudinal axis from the normal to the orbit plane did not exceed 60°. The knowledge of the attitude motion of the satellite allowed us to determine the quasi-steady microacceleration component onboard it at the locations of the technological and scientific equipment.     

Estimating the accuracy of the technique of reconstructing the rotational motion of a satellite based on the measurements of its angular velocity and the magnetic field of the Earth

The paper has studied the accuracy of the technique that allows the rotational motion of the Earth artificial satellites (AES) to be reconstructed based on the data of onboard measurements of angular velocity vectors and the strength of the Earth magnetic field (EMF). The technique is based on kinematic equations of the rotational motion of a rigid body. Both types of measurement data collected over some time interval have been processed jointly. The angular velocity measurements have been approximated using convenient formulas, which are substituted into the kinematic differential equations for the quaternion that specifies the transition from the body-fixed coordinate system of a satellite to the inertial coordinate system. Thus obtained equations represent a kinematic model of the rotational motion of a satellite. The solution of these equations, which approximate real motion, has been found by the least-square method from the condition of best fitting between the data of measurements of the EMF strength vector and its calculated values. The accuracy of the technique has been estimated by processing the data obtained from the board of the service module of the International Space Station (ISS). The reconstruction of station motion using the aforementioned technique has been compared with the telemetry data on the actual motion of the station. The technique has allowed us to reconstruct the station motion in the orbital orientation mode with a maximum error less than 0.6° and the turns with a maximal error of less than 1.2°.     

Experiments with the DAKON-M convection sensor

We have described an express technique for processing the results of experiments with a DAKON-M convection sensor on board the Service Module of the International Space Station (ISS) in 2011. The technique uses a certain rule to compare the sensor measurements with the calculated data on the quasistatic component of microacceleration at the point of installation. The sensor experiments have been conducted during shuttle docking and undocking, when low-frequency microaccelerations on the ISS were significant. The microaccelerations have been calculated using measurement data of the MAMS low-frequency accelerometer installed in the Lab module and the telemetry data on the ISS rotational motion. This has made it possible to convert the MAMS measurement data to the DAKON-M convection sensor installation point. A comparison of sensor readings with calculated microaccelerations has revealed fairly good agreement between them.     

一种模型独立的拟欧拉轴航天器大角度姿态机动

刚性航天器初始姿态捕获 ,要求从任意初始状态机动到角速度要求为零的指定状态。本文基于姿态偏差四元数和瞬时旋转轴偏离欧拉轴程度信息反馈 ,设计了一种拟欧拉轴旋转姿态捕获控制规律。对于刚体的任意初始状态 ,角速度可能不平行于欧拉轴。为减少瞬时旋转轴的偏移程度 ,将初始角速度分解为平行和垂直欧拉轴的两个分量 ,控制器在初始阶段尽快消除垂直角速度分量 ,随后进行拟欧拉旋转机动。最后给出了分析的仿真结果     

Determination of parameters of attitude motion of a small communication satellite using the data of measurements of current of solar panels

A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result, the problem arose to determine the rotational satellite motion according to the available indirect information: current taken from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously processed by the least squares method integrating the equations of rotational satellite motion. We present the results of processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate the total angular momentum of flywheel engines.     

Reconstruction of spacecraft rotational motion using a Kalman filter

Quasi-static microaccelerations of four satellites of the Foton series (nos. 11, 12, M-2, M-3) were monitored as follows. First, according to measurements of onboard sensors obtained in a certain time interval, spacecraft rotational motion was reconstructed in this interval. Then, along the found motion, microacceleration at a given onboard point was calculated according to the known formula as a function of time. The motion was reconstructed by the least squares method using the solutions to the equations of satellite rotational motion. The time intervals in which these equations make reconstruction possible were from one to five orbital revolutions. This length is increased with the modulus of the satellite angular velocity. To get an idea on microaccelerations and satellite motion during an entire flight, the motion was reconstructed in several tens of such intervals. This paper proposes a method for motion reconstruction suitable for an interval of arbitrary length. The method is based on the Kalman filter. We preliminary describe a new version of the method for reconstructing uncontrolled satellite rotational motion from magnetic measurements using the least squares method, which is essentially used to construct the Kalman filter. The results of comparison of both methods are presented using the data obtained on a flight of the Foton M-3.     

Experimental investigation of the modes of operation of uncontrolled attitude motion of the Progress spacecraft

Results of in-flight tests of three modes of uncontrolled attitude motion of the Progress spacecraft are described. These proposed modes of experiments related to microgravity are as follows: (1) triaxial gravitational orientation, (2) gravitational orientation of the rotating satellite, and (3) spin-up in the plane of the orbit around the axis of the maximum moment of inertia. The tests were carried out from May 24 to June 1, 2004 onboard the spacecraft Progress M1-11. The actual motion of this spacecraft with respect to its center of mass, in the above-mentioned modes, was determined by telemetric information about an electric current tapped off from solar batteries. The values of the current obtained during a time interval of several hours were processed jointly using the least squares method by integration of the equations of the spacecraft’s attitude motion. The processing resulted in estimation of the initial conditions of motion and of the parameters of mathematical models used. For the obtained motions the quasi-static component of microaccelerations was computed at a point onboard, where installation of experimental equipment is possible.     

利用反作用飞轮阵实现飞行器大角度姿态机动的非线性快速控制

本文首先给出了采用姿态角速度和四元数矢量部分表示的姿态动力学模型。然后,构造了一个可逆的全局非线性坐标变换,使得非线性姿态动力学模型与一个具有可控标准形的线性系统等价。进一步的设计了反作用飞轮电机力矩的快速控制规律。给出了机动时间和系统状态的简单计算公式。最后,文中还介绍了数字仿真实例和结果。     

Results of Space-Flight Tests of the Vibration-Protective Platform VZP-1K

The data of microacceleration measurements performed onboard the Mirstation are analyzed. The data were taken while testing the passive vibration-protective platform VZP-1K developed by the NPO Kompozit. We have processed the results of simultaneous microacceleration measurements on the vibration-protective platform and on the station body close to the platform. Two sets of the French equipment Microaccelerometer were used for these measurements. It was found that the platform reduces the vibrational component of microaccelerations in the band of frequencies above 3 Hz by more than a factor of 10. In this case, all harmonics with large amplitudes are damped by a factor of 50 and more, and some harmonics with small amplitude are damped only by a factor of 10. In the band 0.3–0.6 Hz (close to natural frequencies of the platform), the several-fold increase in amplitude of the vibrational component of microaccelerations is observed, but since the initial values of this amplitude in all performed experiments were small, the above indicated increase practically has not decreased the vibration-protective properties of the platform. The estimations of natural frequencies and damping coefficients of the platform found as a result of data processing of microacceleration measurements made during its free oscillations are obtained. The dependence of frequencies on the amplitude of oscillations is revealed for one mode, which testifies to appreciable nonlinear effects.     

Rotational motion of <Emphasis Type="Italic">Foton M-4</Emphasis>

The actual controlled rotational motion of the Foton M-4 satellite is reconstructed for the mode of single-axis solar orientation. The reconstruction was carried out using data of onboard measurements of vectors of angular velocity and the strength of the Earth’s magnetic field. The reconstruction method is based on the reconstruction of the kinematic equations of the rotational motion of a solid body. According to the method, measurement data of both types collected at a certain time interval are processed together. Measurements of the angular velocity are interpolated by piecewise-linear functions, which are substituted in kinematic differential equations for a quaternion that defines the transition from the satellite instrument coordinate system to the inertial coordinate system. The obtained equations represent the kinematic model of the satellite rotational motion. A solution of these equations that approximates the actual motion is derived from the condition of the best (in the sense of the least squares method) match between the measurement data of the strength vector of the Earth’s magnetic field and its calculated values. The described method makes it possible to reconstruct the actual rotational satellite motion using one solution of kinematic equations over time intervals longer than 10 h. The found reconstructions have been used to calculate the residual microaccelerations.     

Determination of the inertia tensor of the <Emphasis Type="Italic">International Space Station</Emphasis> on the basis of telemetry data

We describe the method and results of determination of the inertia tensor of the International Space Station using telemetry data related to its attitude motion and the total angular momentum of gyrodines. A linear system of differential equations describing the variation of the total angular momentum of gyrodines on some time interval is derived on the basis of the data related to the station orientation in the same time interval. This linear system represents the theorem related to the variation of the total angular momentum of the station and gyrodines and takes into account the action of gravitational and aerodynamic moments upon the station. The solution to the system depends linearly on the components of the inertia tensor of the station and on the parameters specifying the aerodynamic moment. The estimates of these quantities are carried out by the least squares method on the condition of the best approximation by the solutions to the considered linear system of the telemetry values of the total angular momentum of the gyrodines.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 2, 2005, pp. 135–146.Original Russian Text Copyright © 2005 by Banit, Belyaev, Dobrinskaya, Efimov, Sazonov, Stazhkov.     

Measurement of the Quasistatic Component of Microaccelerations Using a Convection Sensor onboard a Satellite

The problem of the interpretation of measurements made by means of a convection sensor is considered. The sensor is a cubic chamber filled by a viscous fluid (gas). Fixed and unequal temperatures are maintained on two opposite sides of the cube; the other sides are perfect heat conductors. Two differential thermocouples are placed inside the chamber to measure the temperature difference at two pairs of fixed points. The sensor is mounted aboard the Earth's satellite. Mathematical models of various degrees of complexity are proposed which describe processes of heat and mass transfer under the action of a quasistatic component of microaccelerations. The results of mathematical simulation of the data of sensor thermocouples presenting a response to the real quasistatic component of microaccelerations which took place aboard the Mirstation are given. It is shown that under usual conditions of an orbital mission the sensor presents a linear low-frequency filter. By combining the data of several identical sensors, tightly arranged and oriented in a certain way, it is possible to measure low-frequency components of the angular acceleration of the satellite and linear microaccelerations at the point of the sensor position.     

Some Features of Vibrational Perturbations onboard the MirOrbital Station

A number of scientific and technical experiments were carried out and are still being carried out onboard the Mirorbital station in various fields: physics of fluids, space materials study, astrophysics, biotechnology, and so on. The quality and reliability of space experiments are essentially dependent on a knowledge of real microgravitational situation onboard a satellite, which essentially depends on vibrational perturbations. A lot of vibration processes studies have been done up to now on the Mirstation in the following lines of research: control of dynamic and exploitation regimes when carrying out biotechnological and technological experiments; determination of the contribution of different onboard systems and mechanisms to the total vibration perturbations power; and investigation of distributions of microacceleration levels and dynamics of vibration processes in different modules and segments of the orbital station. This paper presents the results of the analysis of vibration perturbations produced by some standard onboard Mirstation systems in a configuration when the KVANT-2 and KRISTALL modules were arranged along the yaw axis of the mainframe. It is shown that due to strong requirements for tolerable levels of the microaccelerations onboard the International Space Station (ISS), the investigations of microgravitational situation, as an integral part of the technological environment, now have a high priority.     

用三轴转台辨识陀螺仪误差模型系数时的速率试验设计

介绍了用三轴转台的匀角速率功能标定捷联陀螺仪的动态误差模型系数的方法。首先计算了陀螺仪的输出，陀螺仪的误差模型系数以及三轴转台三轴同时施加的角速率的函数关系。其次在给定不同的中、内环角速率比时，用傅立叶分析的方法得出了陀螺仪输出的各次谐波幅值与动态误差模型系数的关系，以及相应的结构矩阵和信息矩阵。最后根据信息矩阵行列式值与外环角速率的关系，选定了标定陀螺仪动态误差模型系数时的最优三轴速率试验计划。     

Low-Frequency Microaccelerations onboard the Foton-11 Satellite

We analyze the microacceleration measurements carried out onboard the Foton-11 satellite with the three-component accelerometer BETA. The microaccelerations were recorded virtually throughout the entire orbital flight of the Foton-11 satellite. The data obtained were analyzed in the following way. First they were used to determine the actual rotational motion of the satellite for several arbitrarily selected time intervals 4 h long. This problem was solved by constructing the approximation of the microacceleretation low-frequency component (previously determined from the data) by its calculated analog computed along the solutions to differential equations of rotational motion of the satellite. The approximation was made by the least squares method. As a result, those mathematical model parameters and the solutions to equations of motion were found that gave the best consistency of the microacceleretation low-frequency component and its calculated analog. Then the spectral analysis of the low-frequency component and its calculated analog was made. It was shown that, although basic harmonics of these functions coincided sufficiently well, some harmonics of the low-frequency component failed to be interpreted in terms of the satellite's rotational motion.