Magnetic levitation-based Martian and Lunar gravity simulator.

Missions to Mars will subject living specimens to a range of low gravity environments. Deleterious biological effects of prolonged exposure to Martian gravity (0.38 g), Lunar gravity (0.17 g), and microgravity are expected, but the mechanisms involved and potential for remedies are unknown. We are proposing the development of a facility that provides a simulated Martian and Lunar gravity environment for experiments on biological systems in a well controlled laboratory setting. The magnetic adjustable gravity simulator will employ intense, inhomogeneous magnetic fields to exert magnetic body forces on a specimen that oppose the body force of gravity. By adjusting the magnetic field, it is possible to continuously adjust the total body force acting on a specimen. The simulator system considered consists of a superconducting solenoid with a room temperature bore sufficiently large to accommodate small whole organisms, cell cultures, and gravity sensitive bio-molecular solutions. It will have good optical access so that the organisms can be viewed in situ. This facility will be valuable for experimental observations and public demonstrations of systems in simulated reduced gravity.     

Modeling gravity effects on water retention and gas transport characteristics in plant growth substrates

Growing plants to facilitate life in outer space, for example on the International Space Station (ISS) or at planned deep-space human outposts on the Moon or Mars, has received much attention with regard to NASA’s advanced life support system research. With the objective of in situ resource utilization to conserve energy and to limit transport costs, native materials mined on Moon or Mars are of primary interest for plant growth media in a future outpost, while terrestrial porous substrates with optimal growth media characteristics will be useful for onboard plant growth during space missions. Due to limited experimental opportunities and prohibitive costs, liquid and gas behavior in porous substrates under reduced gravity conditions has been less studied and hence remains poorly understood. Based on ground-based measurements, this study examined water retention, oxygen diffusivity and air permeability characteristics of six plant growth substrates for potential applications in space, including two terrestrial analogs for lunar and Martian soils and four particulate substrates widely used in reduced gravity experiments. To simulate reduced gravity water characteristics, the predictions for ground-based measurements (1 − g) were scaled to two reduced gravity conditions, Martian gravity (0.38 − g) and lunar gravity (0.16 − g), following the observations in previous reduced gravity studies. We described the observed gas diffusivity with a recently developed model combined with a new approach that estimates the gas percolation threshold based on the pore size distribution. The model successfully captured measured data for all investigated media and demonstrated the implications of the poorly-understood shift in gas percolation threshold with improved gas percolation in reduced gravity. Finally, using a substrate-structure parameter related to the gaseous phase, we adequately described the air permeability under reduced gravity conditions.     

Investigation of vertical profile of rain microstructure at Ahmedabad in Indian tropical region

The microstructure of rain has been studied with observations using a vertical looking Micro Rain Radar (MRR) at Ahmedabad (23.06°N, 72.62°E), a tropical location in the Indian region. The rain height, derived from the bright band signature of melting layer of radar reflectivity profile, is found to be variable between the heights 4600 m and 5200 m. The change in the nature of rain, classified on the basis of radar reflectivity, is also observed through the MRR. It has been found that there are three types of rain, namely, convective, mixed and stratiform rain, prevailing with different vertical rain microstructures, such as, Drop Size Distribution (DSD), mean drop size, rain rate, liquid water content and average fall speed of the drops at different heights. It is observed that the vertical DSD profile is more inhomogeneous for mixed and stratiform type rain than for convective type rain. It is also found that the large number of drops of size <0.5 mm is present in convective rain whereas in stratiform rain, drops concentration is appreciable up to 1 mm. A comparison of measurements taken by ground based Disdrometer and that from the 200 m level obtained from MRR shows good agreement for rain rate and DSD at smaller rain rate values. The results may be useful for understanding rain structures over this region.     

The simulation of lunar gravity field recovery from D-VLBI of Chang’E-1 and SELENE lunar orbiters

The lunar gravity field is a foundation to study the lunar interior structure, and to recover the evolution history of the Moon. It is still an open and key topic for lunar science. For above mentioned reasons, it becomes one of the important scientific objectives of recent lunar missions, such as KAGUYA (SELENE) the Japanese lunar mission and Chang’E-1, the Chinese lunar mission. The Chang’E-1 and the SELENE were successfully launched in 2007. It is estimated that these two missions can fly around the Moon longer than 6 months simultaneously. In these two missions, the Chinese new VLBI (Very Long Baseline Interferometry) network will be applied for precise orbit determination (POD) by using a differential VLBI (D-VLBI) method during the mission period. The same-beam D-VLBI technique will contribute to recover the lunar gravity field together with other conventional observables, i.e. R&RR (Range and Range Rate) and multi-way Doppler. Taking VLBI tracking conditions into consideration and using the GEODYNII/SOVLE software of GSFC/NASA/USA [8 and 10], we simulated the lunar gravity field recovering ability with and without D-VLBI between the Chang’E-1 and SELENE main satellite. The cases of overlapped flying and tracking period of 30 days, 60 days and 90 days have been analyzed, respectively. The results show that D-VLBI tracking between two lunar satellites can improve the gravity field recovery remarkably. The results and methods introduced in this paper will benefit the actual missions.     

The relationship between profiles of plagiogravitropism and morphometry of columella cells during the development of lateral roots of Vigna angularis

There has been no convincing explanation on a mechanism inducing plagiogravitropism of lateral roots. The present work deals with gravitropic features of Vignaangularis lateral roots during the course of their growth and morphometric analysis of root caps, columella cells and amyloplasts. Regardless of the magnitude of deviation of the primary root axis from the gravity vector, the newly emerging lateral roots tended to keep a constant angle to the gravity vector. They modified gravireaction several times during the course of their development: a first horizontal-growth stage when they grow in the cortex of primary roots (stage I), a sloping-down growth stage from their emergence to a length of about 1 mm (stage II), a second horizontal-growth stage from a length of about 1 mm to that of over 4 mm (stage III) and a curving-down stage thereafter (stage IV). The columella cells with amyloplasts large enough to sediment were not fully differentiated in the stage I but the turning point from the stage I to II was associated with the development of amyloplasts which were able to sediment toward the distal part of the cell. Amyloplasts were significantly small in the lateral roots over 10 mm long compared with those in ones 0–10 mm long, suggesting that they rapidly develop immediately after the lateral roots emerge from primary roots and then gradually decrease their size when the lateral roots grow over 10 mm long. This dimensional decrease of amyloplasts may be partially involved in weak gravireaction in the stage III. Evidence was not presented indicating that a switchover from the stage III to IV was connected with the dimension of root caps, the number of columella cells and the development of amyloplasts. Some factors at the molecular level rather than at the cellular and tissue levels are probably dominant to induce the stage IV.     

Comparison analyses on the 150 × 150 lunar gravity field models by gravity/topography admittance,correlation and precision orbit determination

We analyzed the 150 × 150 lunar gravity field models, LP150Q, GLGM-3 and SGM150, using the power spectrum on the lunar nearside and farside, the lunar global and localized gravity/topography admittance and correlation, and Chang’E-2 precision orbit determination to investigate which model is a more effective tool to estimate geophysical parameters and determine the lunar satellite precision orbit. Results indicate that all gravity field models can be used to estimate the lunar geophysical parameters of the nearside of the Moon. However, SGM150 is better in such computation of the farside. Additionally, SGM150 is shown to be the most useful model for determining the lunar satellite orbit.     

A simulation of Martian gravity field recovery by using a near equatorial orbiter

An improvement to the Martian gravity field may be achieved by means of future orbiting spacecraft with small eccentricity and low altitude exemplified through a newly proposed mission design that may be tested in upcoming reconnaissance of Mars. Here, the near equatorial orbital character (with an inclination approximating 10°, eccentricity as 0.01 and semi-major axis as 4000 km) is considered, and its contribution to Martian gravity field solution is analyzed by comparing it with a hypothetical polar circular orbiter. The solution models are evaluated in terms of the following viewpoints: power spectra of gravity field coefficients, correlations of low degree zonal coefficients, precise orbit determination, and error distribution of both Mars free air gravity anomaly and areoid. At the same time, the contributions of the near equatorial orbiters in low degree zonal coefficients time variations are also considered. The present results show that the near equatorial orbiter allows us to improve the accuracy of the Martian gravity field solution, decrease correlation of low degree zonal coefficients, retrieve much better time variable information of low degree zonal coefficients, improve precise orbit determination, and provide more accurate Mars free air gravity anomaly and areoid around the equatorial region.     

Intracellular molecular distributions in spacecraft experiments in orbit around Earth

It is possible that the nucleolous inside the cell plays the role of a “gravity receptor”. Furthermore, cells up to 10 μm in diameter can demonstrate some effect due to the redistribution of mitochondria or nucleolous. Effects of gravity should be present in various cell systems where larger objects such as the ribosomes move from cell to cell. In this paper we study the effects of gravity on cells. In particular, we examine the resulting intracellular molecular distribution due to Brownian motion and the ordered distribution of molecules under the action of gravity, where n₀ is the number per unit volume at certain level, and n is the number per unit volume above that level. This is an experiment that takes place at a certain orbital altitude in a spacecraft in orbit around Earth, where the acceleration due to the central field is corrected for the oblateness and also the rotation of the Earth. We found that equatorial circular and elliptical orbits have the highest n/n₀ ratios. This experiment takes place in circular and elliptical orbits, with eccentricities e = 0, 0.1 and involves a bacterial cell at an orbital altitude of 300 km. We found that n/n₀ = 1.00299 and 1.0037 respectively, which is still a 0.6–0.7 % higher than n/n₀ = 0.0996685 calculated on the surface of the Earth. Examining mitochondria in similar orbital experiments we found that equatorial orbits result to higher n/n₀ ratios. In particular, we found that n/n₀ = 8.38119, where an elliptical orbit of eccentricity e = 0.1 results to n/n₀ = 13.8525. Both are high above 100%, signifying the importance of Brownian motion over gravity. Our results are of interest to biomedical applications. Molecular concentrations are important for various processes such as the embryogenesis, positional homeostasis and its relation to cell energy expenditure, cell torque, cell deformation, and more. These results indicate that statistical molecular distributions play an important role for the recognition of a particular environment by the cell, in biological space experiment to come.     

Electrostatic gravity gradiometer design for the future mission

Satellite gravity gradiometry has been applied in GOCE mission to obtain higher harmonics of the Earth’s gravity mapping. In-orbit results showed that the precision of GOCE gradiometry achieved a level of 10–20 mE/Hz^1/2 in the bandwidth of 38–100 mHz, and the major error source came from the intrinsic noise of the core sensor electrostatic accelerometer. Two schemes for improving sensitivity of such accelerometer are presented by optimizing the parameters to reduce the dynamic range and choosing the heavier proof mass to suppress the thermal noise limited by the discharging gold wire. As a result, an accelerometer with a better resolution of 6.6×$6.6\times$10⁻¹³ m/s²/Hz^1/2 could be developed, and then a precision of 3 mE/Hz^1/2, corresponding to a spatial resolution of about 78 km half wavelength, is achievable for the future satellite gradiometric mission.     

Passive cooling of superconducting magnetic systems in space

The equilibrium temperature of a system in space can be lowered by a suitable choice of its geometry and its attitude. This remark is important for devices based on medium temperature and high temperature superconducting materials, and offers the possibility of their fully passive cooling without or with a marginal recourse to active systems. General parameterizations are given and simple schemes discussed. The adopted geometrical configuration and the attitude can enhance the role of passive cooling of the large superconducting magnetic systems required for protecting from ionizing radiation manned habitats in deep space. A specific example based on MgB₂ cable for protecting large volume habitats (500 and 1000 m³) is treated. The systems can be run in deep space at equilibrium temperatures around 20 K mainly by passive cooling, provided that their geometry and attitude would be suitably chosen.     

Time variations of cosmic-ray helium isotopes with BESS-Polar I

The Balloon-borne Experiment with a Superconducting Spectrometer (BESS) is configured with a solenoidal superconducting magnet and a suite of precision particle detectors, including time-of-flight hodoscopes based on plastic scintillators, a silica-aerogel Cherenkov detector, and a high resolution tracking system with a central jet-type drift chamber. The charges of incident particles are determined from energy losses in the scintillators. Their magnetic rigidities (momentum/charge) are measured by reconstructing each particle trajectory in the magnetic field, and their velocities are obtained by using the time-of-flight system. Together, these measurements can accurately identify helium isotopes among the incoming cosmic-ray helium nuclei up to energies in the GeV per nucleon region. The BESS-Polar I instrument flew for 8.5 days over Antarctica from December 13th to December 21st, 2004. Its long-duration flight and large geometric acceptance allow the time variations of isotopic fluxes to be studied for the first time. The time variations of helium isotope fluxes are presented here for rigidities from 1.2 to 2.5 GV and results are compared to previously reported proton data and neutron monitor data.     

Contribution of satellite laser ranging to combined gravity field models

In the framework of satellite-only gravity field modeling, satellite laser ranging (SLR) data is typically exploited to recover long-wavelength features. This contribution provides a detailed discussion of the SLR component of GOCO02S, the latest release of combined models within the GOCO series. Over a period of five years (January 2006 to December 2010), observations to LAGEOS-1, LAGEOS-2, Ajisai, Stella, and Starlette were analyzed. We conducted a series of closed-loop simulations and found that estimating monthly sets of spherical harmonic coefficients beyond degree five leads to exceedingly ill-posed normal equation systems. Therefore, we adopted degree five as the spectral resolution for real data analysis. We compared our monthly coefficient estimates of degree two with SLR and Gravity Recovery and Climate Experiment (GRACE) time series provided by the Center for Space Research (CSR) at Austin, Texas. Significant deviations in C₂₀ were noted between SLR and GRACE; the agreement is better for the non-zonal coefficients. Fitting sinusoids together with a linear trend to our C₂₀ time series yielded a rate of (−1.75 ± 0.6) × 10⁻¹¹/yr; this drift is equivalent to a geoid change from pole to equator of 0.35 ± 0.12 mm/yr or an apparent Greenland mass loss of 178.5 ± 61.2 km³/yr. The mean of all monthly solutions, averaged over the five-year period, served as input for the satellite-only model GOCO02S. The contribution of SLR to the combined gravity field model is highest for C₂₀, and hence is essential for the determination of the Earth’s oblateness.     

Generation of vertical–horizontal and horizontal–horizontal gravity gradients using stochastically modified integral estimators

The Earth’s gravity field modelling is an ill-posed problem having a sensitive solution to the error of data. Satellite gravity gradiometry (SGG) is a space technique to measure the second-order derivatives of geopotential for modelling this field, but the measurements should be validated prior to use. The existing terrestrial gravity anomalies and Earth gravity models can be used for this purpose. In this paper, the second-order vertical–horizontal (VH) and horizontal–horizontal (HH) derivatives of the extended Stokes formula in the local north-oriented frame are modified using biased, unbiased and optimum types of least-squares modification. These modified integral estimators are used to generate the VH and HH gradients at 250 km level for validation purpose of the SGG data. It is shown that, unlike the integral estimator for generating the second-order radial derivative of geopotential, the system of equations from which the modification parameters are obtained is unstable for all types of modification, with large cap size and high degree, and regularization is strongly required for solving the system. Numerical studies in Fennoscandia show that the SGG data can be estimated with an accuracy of 1 mE using an integral estimator modified by a biased type least-squares modification. In this case an integration cap size of 2.5° and a degree of modification of 100 for integrating 30′ × 30′ gravity anomalies are required.     

Vertical wavenumber spectra of atmospheric ozone measured from ozonesonde observations

Vertical profiles of ozone have been measured at balloon altitudes. Our purpose is to examine the character of vertical wavenumber spectra of ozone fluctuations, to assess the possible roles of gravity wave field in ozone fluctuations, and to determine dominant vertical wavelengths of ozone spectra. Vertical wavenumber spectra of 12 ozone fluctuations obtained during June–August 2003 are presented. Results indicate that mean spectral slopes in the wavenumber range from 4.69 × 10⁻⁴ to 2.50 × 10⁻³ cyc/m are about −2.91 in the troposphere and −2.87 in the lower stratosphere, which is close to the slope of −3 predicted by current gravity wave saturation models. The consistency of the observed spectral slopes with the value of −3 predicted by current gravity wave saturation models suggests that the observed ozone fluctuations are due primarily to atmospheric gravity waves. At m = 1/(1000 m) the mean spectral amplitude is over 30 times larger in the lower stratosphere than in the troposphere. Mean vertical wavenumber spectra in area-preserving form reveal dominant vertical wavelengths of ∼2.6 km in the troposphere and ∼2.7 km in the lower stratosphere, which is consistent with the values varying between 1.5 and 3.0 km estimated from the velocity field and temperature field at these heights.     

The LAGEOS satellites orbit and Yukawa-like interactions

LAGEOS II general relativity pericenter precession has been analysed in terms of the errors produced by the mismodelling of both the gravitational and non-gravitational perturbations acting on the satellite orbit. The accuracy in the pericenter determination may be considered as an upper-bound value for the estimate of the strength α of a possible new-long-range-interaction described by a Yukawa-like potential. In the present work we have focused on the constraints in α that can be obtained with the current best multi-satellites gravity field model EGM96 (α < 2.6 × 10⁻¹⁰) and also with the first promising models from the CHAMP (α < 1.8 × 10⁻¹⁰) and GRACE (α < 1.2 × 10⁻¹⁰) gravimetric missions. These results represent, potentially, an improvement of two or three orders-of-magnitude with respect to the best constraints obtained in the past with Earth–LAGEOS and Lunar–LAGEOS data (|α| < 10⁻⁵–10⁻⁸). The impact of the non-gravitational perturbations mismodelling in the final error budget has been determined together with the improvements obtainable in the constraint of the strength α with the proposed LARES satellite.     

MPDT超导磁喷管外部磁场影响分析

由于传统提供附加磁场的液冷铜线圈存在体积大、质量大、电耗大等显著缺点,因此电流密度高、体积小、损耗低的高温超导（HTS）磁体在附加场磁等离子发动机（AF MPDT）上的应用受到了广泛的关注。然而由于超导材料的临界特性,HTS磁体容易受到外部磁场的影响而发生失超。文章通过对MPDT放电回路的简化,采用仿真和试验的方法来分析简化回路通电时激发的磁场,并研究其对外围HTS磁体的影响程度。仿真结果表明,MPDT放电室内部磁场以周向磁场为主,且由于阳极壁面电流对内部磁场的屏蔽作用,使得外部几乎没有磁场分布。试验结果和仿真也取得了良好的一致性,因此在设计超导磁喷管时几乎可以不考虑来自MPDT放电室磁场的影响。该研究为HTS磁体在AF MPDT上的应用提供了参考。     

Debris flux comparisons from the Goldstone Radar,Haystack Radar,and Hax Radar prior,during, and after the last solar maximum

The continual monitoring of the low Earth orbit (LEO) debris environment using highly sensitive radars is essential for an accurate characterization of these dynamic populations. Debris populations are continually evolving since there are new debris sources, previously unrecognized debris sources, and debris loss mechanisms that are dependent on the dynamic space environment. Such radar data are used to supplement, update, and validate existing orbital debris models. NASA has been utilizing radar observations of the debris environment for over a decade from three complementary radars: the NASA JPL Goldstone radar, the MIT Lincoln Laboratory (MIT/LL) Long Range Imaging Radar (known as the Haystack radar), and the MIT/LL Haystack Auxiliary radar (HAX). All of these systems are highly sensitive radars that operate in a fixed staring mode to statistically sample orbital debris in the LEO environment. Each of these radars is ideally suited to measure debris within a specific size region. The Goldstone radar generally observes objects with sizes from 2 mm to 1 cm. The Haystack radar generally measures from 5 mm to several meters. The HAX radar generally measures from 2 cm to several meters. These overlapping size regions allow a continuous measurement of cumulative debris flux versus diameter from 2 mm to several meters for a given altitude window. This is demonstrated for all three radars by comparing the debris flux versus diameter over 200 km altitude windows for 3 nonconsecutive years from 1998 to 2003. These years correspond to periods before, during, and after the peak of the last solar cycle. Comparing the year to year flux from Haystack for each of these altitude regions indicate statistically significant changes in subsets of the debris populations. Potential causes of these changes are discussed. These analysis results include error bars that represent statistical sampling errors.     

Inversion of satellite gradiometry data using statistically modified integral formulas for local gravity field recovery

The satellite gravity gradiometric data can be used directly to recover the gravity anomaly at sea level using inversion of integral formulas. This approach suffers by the spatial truncation errors of the integrals, but these errors can be reduced by modifying the formulas. It allows us to consider smaller coverage of the satellite data over the region of recovery. In this study, we consider the second-order radial derivative (SORD) of disturbing potential (T_rr) and determine the gravity anomaly with a resolution of 1° × 1° at sea level by inverting the statistically modified version of SORD of extended Stokes’ formula. Also we investigate the effect of the spatial truncation error on the quality of inversion considering noise of T_rr. The numerical investigations show satisfactory results when the area of T_rr coverage is the same with that of the gravity anomaly and the integral formula is modified by the biased least-squares modification. The error of recovery will be about 6 mGal after removing the regularization bias in the presence of 1 mE noise in T_rr measured on the orbit.     

Use of principal component analysis in the identification of the spatial pattern of an ionospheric total electron content anomalies after China’s May 12, 2008, M = 7.9 Wenchuan earthquake

This paper uses principal component analysis (PCA) to determine the spatial pattern of total electron content (TEC) anomalies in the ionosphere post the China’s Wenchuan Earthquake of 12 May, 2008 (UTC) (M_w = 7.9). PCA and image processing are applied to the global ionospheric map (GIM) with transforms conducted for the time period 08:00–10:00 UT on 12 May 2008. Results show that at a height of approximately 200 km the anomaly is widespread and less intense; however, it becomes more localized with height reaching maximum intensity and localization at an altitude of 300 km. The spatial distribution is remarkably similar to that reported for a TEC anomaly previously identified as a precursor anomaly on May 9, 2008 for the same time period. Potential causes of the results are discussed with emphasis given to vertical acoustic gravity waves based on the spatial pattern identified.     

IDS contribution to ITRF2008

For the first time, the International DORIS Service (IDS) has produced a technique level combination based on the contributions of seven analysis centers (ACs), including the European Space Operations Center (ESOC), Geodetic Observatory Pecny (GOP), Geoscience Australia (GAU), the NASA Goddard Space Flight Center (GSFC), the Institut Géographique National (IGN), the Institute of Astronomy, Russian Academy of Sciences (INASAN, named as INA), and CNES/CLS (named as LCA). The ACs used five different software packages to process the DORIS data from 1992 to 2008, including NAPEOS (ESA), Bernese (GOP), GEODYN (GAU, GSC), GIPSY/OASIS (INA), and GINS (LCA). The data from seven DORIS satellites, TOPEX/Poseidon, SPOT-2, SPOT-3, SPOT-4, SPOT-5, Envisat and Jason-1 were processed and all the analysis centers produced weekly SINEX files in either variance–covariance or normal equation format. The processing by the analysis centers used the latest GRACE-derived gravity models, forward modelling of atmospheric gravity, updates to the radiation pressure modelling to improve the DORIS geocenter solutions, denser parameterization of empirically determined drag coefficients to improve station and EOP solutions, especially near the solar maximum in 2001–2002, updated troposphere mapping functions, and an ITRF2005-derived station set for orbit determination, DPOD2005. The CATREF software was used to process the weekly AC solutions, and produce three iterations of an IDS global weekly combination. Between the development of the initial solution IDS-1, and the final solution, IDS-3, the ACs improved their analysis strategies and submitted updated solutions to eliminate troposphere-derived biases in the solution scale, to reduce drag-related degradations in station positioning, and to refine the estimation strategy to improve the combination geocenter solution. An analysis of the frequency content of the individual AC geocenter and scale solutions was used as the basis to define the scale and geocenter of the IDS-3 combination. The final IDS-3 combination has an internal position consistency (WRMS) that is 15 to 20 mm before 2002 and 8 to 10 mm after 2002, when 4 or 5 satellites contribute to the weekly solutions. The final IDS-3 combination includes solutions for 130 DORIS stations on 67 different sites of which 35 have occupations over 16 years (1993.0–2009.0). The EOPs from the IDS-3 combination were compared with the IERS 05 C04 time series and the RMS agreement was 0.24 mas and 0.35 mas for the X and Y components of polar motion. The comparison to ITRF2005 in station position shows an agreement of 6 to 8 mm RMS in horizontal and 10.3 mm in height. The RMS comparison to ITRF2005 in station velocity is at 1.8 mm/year on the East component, to 1.2 mm/year in North component and 1.6 mm/year in height.