主带小行星采样返回任务中的离子电推进应用方案

由于离子电推进的高比冲特性,采用它执行小行星探测器巡航阶段轨道机动任务时,将使探测器在同样的有效载荷下的发射重量大大减轻。针对我国规划中的主带小行星采样返回任务,调研了国外离子电推进在深空探测任务中的应用情况,在借鉴国外成功经验和任务需求分析的基础上,设计了主带小行星探测器离子电推进系统方案和应用策略,计算了在目前离子推力器寿命水平下,既定探测任务对离子电推进推力、比冲、推进剂量以及功耗需求。研究表明,目前研制的离子推力器可以满足规划中的主带小行星探测任务需求。研究成果对探测器的方案设计有参考价值。     

载人小行星探测的总体方案设想

载人探测近地小行星的工程规模和技术难度介于载人探月和载人火星探测之间,是人类开展载人火星探测和飞向更遥远深空的跳板,对于航天技术的发展和科学问题的探索有着极其重要的意义。在调研国外载人小行星探测方案设想的基础上,结合我国航天技术现状和发展趋势,提出了一种载人小行星探测的总体方案设想,并梳理了载人小行星探测的关键技术。研究成果可以作为我国载人小行星探测任务论证和设计的有益参考。     

Mars Sample Return: Do Australians trust NASA?

Mars Sample Return (MSR) represents an important scientific goal in space exploration. Any sample return mission will be extremely challenging from a scientific, economic and technical standpoint. But equally testing, will be communicating with a public that may have a very different perception of the mission. A MSR mission will generate international publicity and it is vital that NASA acknowledge the nature and extent of public concern about the mission risks and, perhaps equally importantly, the public’s confidence in NASA’s ability to prepare for and manage these risks. This study investigated the level of trust in NASA in an Australian population sample, and whether this trust was dependent on demographic variables. Participants completed an online survey that explored their attitudes towards NASA and a MSR mission. The results suggested that people believe NASA will complete the mission successfully but have doubts as to whether NASA will be honest when communicating with the public. The most significant finding to emerge from this study was that confidence in NASA was significantly (p < 0.05) related to the respondent’s level of knowledge regarding the risks and benefits of MSR. These results have important implications for risk management and communication.     

A small mission for in situ exploration of a primitive binary near-Earth asteroid

We present a concept for a challenging in situ science mission to a primitive, binary near-Earth asteroid. A sub-400-kg spacecraft would use solar electric propulsion to rendezvous with the C-class binary asteroid (175706) 1996 FG3. A campaign of remote observations of both worlds would be followed by landing on the ∼1 km diameter primary to perform in situ measurements. The total available payload mass would be around 34 kg, allowing a wide range of measurement objectives to be addressed. This mission arose during 2004 from the activities of the ad-hoc Small Bodies Group of the DLR-led Planetary Lander Initiative. Although the particular mission scenario proposed here was not studied further per se, the experience was carried over to subsequent European asteroid mission studies, including first LEONARD and now the Marco Polo near-Earth asteroid sample return proposal for ESA’s Cosmic Vision programme. This paper may thus be of interest as much for insight into the life cycle of mission proposals as for the concept itself.     

A sample collector for robotic sample return missions II: Radiation tests

Sample return from small solar system objects is playing an increasingly important part in solar system exploration. Critical to such missions is a robust, simple, and economic sample collector. We have developed a collector such as this for near-Earth asteroid sample return missions that we have termed the Touch-and-Go Impregnable Pad (TGIP). The collector utilizes a silicone substrate that is pushed into the dust and gravel surface layer of the asteroid. As part of a systematic evaluation of the TGIP, we have investigated the resilience of this substrate to ionizing radiations. Several miniature versions of the collector, containing typically ∼3 g of the collection substrate, were exposed to 0.564 MeV beta particles from a ⁹⁰Sr source and a 6 MeV electron beam in a linear accelerator to simulate the wide range of energies of solar and galactic ionizing radiation. Various radiation levels up to eight times greater than expected on a six-year asteroid mission (in the case of beta radiation) and 50 times greater than expected (in the case of the 6 MeV electron radiation) were administered to the substrate. After irradiation, the efficiency of the substrate in collecting samples of mock regolith was compared with that of collectors that had not been irradiated. No difference beyond experimental uncertainty was observed and we suggest that the operational TGIP will not be affected adversely by radiation doses expected during a typical six-year inner solar system mission.     

Encounter trajectories for deep space mission ASTER to the triple near Earth asteroid 2001-SN263. The laser altimeter (ALR) point of view

In cooperation with Russia, the Brazilian deep space mission ASTER plans to send a small spacecraft to investigate the triple asteroid 2001-SN263. The nearest launch opportunities for this project include June 2022 and June 2025. One main exploration campaign is being planned with focus on the largest asteroid (Alpha). Among the instruments under development, a laser altimeter (named ALR) was preliminarily designed and presented in 2010–2011. Many studies to define mission and instruments requirements were performed aiming at the characterization of important issues for the successful realization of the mission. Among them, the identification of a suitable trajectory that could be followed by the ASTER spacecraft in the encounter phase, when the main campaign will take place. This paper describes the effort undertaken with focus on the laser altimeter operation. Possible encounter trajectories were modelled and simulated to identify suitable approach parameters and conditions allowing the accomplishment of the intended investigation. The simulation also involves the instrument operation, considering approach geometry, attitude, relative motion, time/date, and the dynamics of the main asteroid. From the laser altimeter point of view, keeping in mind the desired coverage results (50% minimum surface coverage of asteroid Alpha, complying with horizontal and vertical resolution requirements), results point out crucial features for the encounter trajectory, like the need for a small inclination (10^-6 degrees; with respect to the asteroid's orbit), the most favourable spacecraft positioning (between the Sun and the asteroid) and pointing condition (back to the Sun), the minimum amount of achievable surface coverage (58%, focused on central areas), and the most proper time to conduct the main campaign (January 2025). Concerning the instrument, results offer refined values for divergence angle (500 to 650 μrad, half-cone), pulse repetition frequencies (from 1/20 to 1 Hz), and consequent data generation rates. A simulation tool that can use any 3D generated trajectories as input data was created for the analyses presented here. Although created for the ALR in this mission, this simple analysis tool can be adapted to other instruments in this or other missions.     

Mars Phobos and Deimos Survey (M-PADS) – A martian Moons orbiter and Phobos lander

We describe a Mars ‘Micro Mission’ for detailed study of the martian satellites Phobos and Deimos. The mission involves two ∼330 kg spacecraft equipped with solar electric propulsion to reach Mars orbit. The two spacecraft are stacked for launch: an orbiter for remote investigation of the moons and in situ studies of their environment in Mars orbit, and another carrying a lander for in situ measurements on the surface of Phobos (or alternatively Deimos). Phobos and Deimos remain only partially studied, and Deimos less well than Phobos. Mars has almost always been the primary mission objective, while the more dedicated Phobos project (1988–89) failed to realise its full potential. Many questions remain concerning the moons’ origins, evolution, physical nature and composition. Current missions, such as Mars Express, are extending our knowledge of Phobos in some areas but largely neglect Deimos. The objectives of M-PADS focus on: origins and evolution, interactions with Mars, volatiles and interiors, surface features, and differences. The consequent measurement requirements imply both landed and remote sensing payloads. M-PADS is expected to accommodate a 60 kg orbital payload and a 16 kg lander payload. M-PADS resulted from a BNSC-funded study carried out in 2003 to define candidate Mars Micro Mission concepts for ESA’s Aurora programme.     

China's Future Missions for Deep Space Exploration and Exoplanet Space Survey by 2030

Four future missions for deep space exploration and future space-based exoplanet surveys on habitable planets by 2030 are scheduled to be launched. Two Mars exploration missions are designed to investigate geological structure, the material on Martian surface, and retrieve returned samples. The asteroids and main belt comet exploration is expected to explore two objects within 10 years. The small-body mission will aim to land on the asteroid and get samples return to Earth. The basic physical characteristics of the two objects will be obtained through the mission. The exploration of Jupiter system will characterize the environment of Jupiter and the four largest Moons and understand the atmosphere of Jupiter. In addition, we further introduce two space-based exoplanet survey by 2030, Miyin Program and Closeby Habitable Exoplanet Survey (CHES Mission). Miyin program aims to detect habitable exoplanets using interferometry, while CHES mission expects to discover habitable exoplanets orbiting FGK stars within 10 pc through astrometry. The above-mentioned missions are positively to achieve breakthroughs in the field of planetary science.      

A sample collector for robotic sample return missions I: Temperature effect on collected mass

Sample return is playing an increasingly important role in solar system exploration. Among the possible mission on the horizon, are sample return from asteroids, comets, the Moon and Mars. A collector initially intended for near-Earth asteroids is the touch-and-go-impregnable-pad (TGIP). Here we explore the effect of temperature on its collection capabilities. Temperatures expected on near-Earth asteroid mission targets range from −43 to 36 °C. Experiments were conducted at −75, −50, −25, 23, 65, and 105 °C. It was found that the mass of sample collected by the TGIP increased almost linearly to 23 °C and then leveled off at higher temperatures. We also found that the collector did not lose its ability to collect samples after being subjected to −75 °C temperatures (essentially frozen) and then thawed. These experiments have shown that the TGIP can operate effectively at temperatures expected on near-Earth asteroids, especially if collection is performed on the sunward side of the asteroid.     

小行星探测电推进系统方案研究

小行星探测以及资源开发与利用对国家抢占深空探测主动权和制高点有着不可估量的战略意义。电推进具有高比冲、长寿命和高度自主巡航等特点,小行星探测器采用电推进执行巡航阶段轨道机动任务,将大幅减少推进剂重量和提高载重比。调研了国外小行星探测的电推进系统方案,针对我国小行星探测对电推进系统的任务需求及现有电推力器的技术基础,提出了5种电推进系统方案,并进行多维度对比,对最优方案进行了设计和关键技术梳理。     

Proposal for a multiple-asteroid-flyby mission with sample return

Asteroid exploration provides a new approach to study the formation of the solar system and the planetary evolution. Choosing a suitable target and designing of feasible profile for asteroid mission are challenging due to constraints such as scientific value and technical feasibility. This paper investigates a feasible mission scenario among the potential candidates of multiple flybys and sample return missions. First, a group of potential candidates are selected by considering the physical properties and accessibility of asteroids, for the sample return missions. Second, the feasible mission scenarios for multiple flybys and sample return missions to various spectral-type asteroids are investigated. We present the optimized design of preliminary interplanetary transfer trajectory for two kinds of missions. One is the single sample return mission to asteroids with various spectral types. The other is the multiple flybys and sample return mission to several asteroids. In order to find the optimal profiles, the planetary swing-by technique and Differential Evolution algorithm are used.     

Synergistic approach of asteroid exploitation and planetary protection

The asteroid and cometary impact hazard has long been recognised as an important issue requiring risk assessment and contingency planning. At the same time asteroids have also been acknowledged as possible sources of raw materials for future large-scale space engineering ventures. This paper explores possible synergies between these two apparently opposed views; planetary protection and space resource exploitation. In particular, the paper assumes a 5 tonne low-thrust spacecraft as a baseline for asteroid deflection and capture (or resource transport) missions. The system is assumed to land on the asteroid and provide a continuous thrust able to modify the orbit of the asteroid according to the mission objective. The paper analyses the capability of such a near-term system to provide both planetary protection and asteroid resources to Earth. Results show that a 5 tonne spacecraft could provide a high level of protection for modest impact hazards: airburst and local damage events (caused by 15–170 m diameter objects). At the same time, the same spacecraft could also be used to transport to bound Earth orbits significant quantities of material through judicious use of orbital dynamics and passively safe aero-capture manoeuvres or low energy ballistic capture. As will be shown, a 5 tonne low-thrust spacecraft could potentially transport between 12 and 350 times its own mass of asteroid resources by means of ballistic capture or aero-capture trajectories that pose very low dynamical pressures on the object.     

Trajectory optimization of multiple asteroids exploration with asteroid 2010TK7 as main target

In this study, the Earth’s Trojan asteroid 2010 TK₇ is selected as the rendezvous target. The multiple flyby sequence of asteroid exploration was proposed by optimizing the probe’s orbit. Impulsive maneuvers and low-thrust propulsion were used respectively to design the trajectories of the multiple asteroids exploration mission. Under impulsive maneuvers, gravity assist technique was adopted to reduce fuel consumption. First a reference orbit with only 2010 TK₇ as the rendezvous target was designed. Then five asteroids near the reference orbit were selected as candidates. Finally, we obtained a multiple asteroids exploration sequence of three asteroids based on gravity assist technique and genetic algorithm, and an additional velocity impulse of 0.4?km/s was required. In the subsequent section, a sixth-degree inverse polynomial shape-based method is applied to the low-thrust trajectory design of 2010 TK₇, and the exploration sequence under the action of low-thrust propulsion was provided.     

China's Lunar and Deep Space Exploration Program for the Next Decade (2020-2030)

China has carried out four unmanned missions to the Moon since it launched Chang'E-1, the first lunar orbiter in 2007. With the implementation of the Chang'E-5 mission this year, the three phases of the lunar exploration program, namely orbiting, landing and returning, have been completed. In the plan of follow-up unmanned lunar exploration missions, it is planned to establish an experimental lunar research station at the lunar south pole by 2030 through the implementation of several missions, laying a foundation for the establishment of practical lunar research station in the future. China successfully launched its first Mars probe on 23 July 2020, followed in future by an asteroid mission, second Mars mission, and a mission to explore Jupiter and its moons.      

A multiple-rendezvous,sample-return mission to two near-Earth asteroids

We propose a dual-rendezvous mission, targeting near-Earth asteroids, including sample-return. The mission, Asteroid Sampling Mission (ASM), consists of two parts: (i) flyby and remote sensing of a Q-type asteroid, and (ii) sampling of a V-type asteroid. The targeted undifferentiated Q-type are found mainly in the near-Earth space, and to this date have not been the target of a space mission. We have chosen, for our sampling target, an asteroid from the basaltic class (V-type), as asteroids in this class exhibit spectral signatures that resemble those of the well-studied Howardite–Eucrite–Diogenite (HED) meteorite suite. With this mission, we expect to answer specific questions about the links between differentiated meteorites and asteroids, as well as gain further insight into the broader issues of early Solar System (SS) evolution and the formation of terrestrial planets. To achieve the mission, we designed a spacecraft with a dry mass of less than 3 tonnes that uses electric propulsion with a solar-electric power supply of 15 kW at 1 Astronomical Unit (AU). The mission includes a series of remote sensing instruments, envisages landing of the whole spacecraft on the sampling target, and employs an innovative sampling mechanism. Launch is foreseen to occur in 2018, as the designed timetable, and the mission would last about 10 years, bringing back a 150 g subsurface sample within a small re-entry capsule. This paper is a work presented at the 2008 Summer School Alpbach,“Sample return from the Moon, asteroids and comets” organized by the Aeronautics and Space Agency of the Austrian Research Promotion Agency. It is co-sponsored by ESA and the national space authorities of its Member and Co-operating States, with the support of the International Space Science Institute and Austrospace.     

Phobos-Grunt: Russian sample return mission

As an important milestone in the exploration of Mars and small bodies, a new generation space vehicle “Phobos-Grunt” is planned to be launched by the Russian Aviation and Space Agency. The project is optimized around a Phobos sample return mission and follow up missions targeted to study some main asteroid belt bodies, NEOs and short period comets. The principal constraint is use of the “Soyuz-Fregat” rather than the “Proton” launcher to accomplish these challenging goals. The vehicle design incorporates innovative SEP technology involving electrojet engines that allowed us to increase significantly the mission's energetic capabilities, as well as highly autonomous on-board systems. Basic criteria underlining the “Phobos-Grunt” mission scenario, scientific objectives and rationale including Mars observations during the vehicle's insertion into Mars orbit and Phobos approach maneuvers, are discussed and an opportunity for international cooperation is suggested.     

小行星探测发展综述

小天体上保存着太阳系形成初期的原始成分,同时可能蕴含着地球生命与水起源的重要线索,是研究太阳系起源和演化历史的活化石。近年来,小行星探测已成为主要航天国家深空探索领域的重点发展目标之一。简要总结了国际上小天体探测历程,对小行星探测的研究和发展趋势进行了综述,重点探讨了未来小行星探测任务面临的主要关键技术,并对中国后续开展小行星探测活动提出了相关建议。     

小行星与陨石的光谱联系

Bus-DeMeo光谱分类系统中有24种小行星光谱类型以及约27种陨石矿物学类型。小行星和陨石之间的光谱联系在质量和可靠性上差异很大原因主要是某些矿物学中缺乏诊断特征和空间风化作用。将回顾从可见光和近红外光谱中远程获取的小行星矿物学信息,讨论如何从地质学家的角度理解小行星的光谱辨识。     

METHIS: Mercury thermal infrared spectrometer

The BepiColombo mission to Mercury is devoted to the thorough exploration of Mercury and its environment, with the aim to understand the processes of planetary formation and evolution in the hottest part of the protoplanetary nebula. This mission represents an unique opportunity for the European community to extend the understanding of the Solar Nebula evolution from its outer edge – ideally represented by comets – to its inner and warmer edge. Obviously this exploration asks for a detailed knowledge of the main constituents of the matter present in the different Solar System areas. Spectroscopy is a powerful tool to acquire this knowledge. We have participated with a large consortium of European researchers to the development of the Rosetta imaging spectrometer. We propose here to use our experience to develop a newly designed spectrometer to investigate the mineralogical composition of the Mercurial surface. Given the particular thermodynamical situation of the Mercurial surface, we have developed a concept that combines a medium IR low spectral resolution imager with a moderate spectral resolution NIR point spectrometer. The main goal of METHIS is to provide the mineralogical characterisation of the surface with sufficient spectral resolution in a scientifically diagnostic spectral range.     

低速溅射小行星表面采样的动力学仿真

开发了适用于小行星环境的大规模三维离散元程序DEMBody,针对低速射弹溅射表层风化层的小行星采样方案,仿真了相同质量不同形状的射弹在微重力环境下垂直射入颗粒床的过程,研究了溅射物质在采样器中的运动历程及最终收集质量与射弹形状的关系。结果表明,90°锥形射弹的采样效率最高。