关于雷达抗干扰能力的度量方法

雷达抗干扰能力是军用雷达最重要的性能之一,但迄今还没有通用的度量方法。本文首先评价了前人的有关论述,又分析了决定雷达抗干扰能力的各项因子,它们是:雷达平均发射功率P、雷达对目标的观察时间T_O、雷达的瞬时带宽B_I、雷达的天线增益G、雷达的天线质量因子F_A与雷达的信号质量因子F_S,最后提出这些因子的乘积可作为综合度量雷达抗干扰能力的表达式。     

红外探测设备抗烟幕干扰试验及评估方法

红外探测设备抗烟幕干扰能力是其抗干扰能力的重要部分。常规方法对场地和实施要求很高,试验次数安排有限。文章对该试验设计的关键问题开展分析和研究,根据红外探测设备作用距离与目标能量的关系,采用"等效试验"构建外场静态试验干扰环境,并合理选择试验因素采用均匀设计方法进行试验设计,确定抗干扰试验方案和评估方法。该方案可指导试验获得科学合理有效的数据,从而实现烟幕干扰环境下红外探测设备的抗干扰能力的准确评估。     

基于嵌入式仿真的雷达训练系统设计

介绍了嵌入式仿真技术及其发展,将嵌入式仿真与雷达模拟训练相结合,构成了能够嵌入到机械扫描雷达实装的模拟训练系统。描述了对嵌入式仿真训练系统的结构组成以及部分模块的功能,研究了模拟雷达视频回波数据的方法和模型,包括目标回波、地物杂波、海杂波、气象杂波、有源干扰和接收机内部噪声,利用数学模型计算回波的强度、方位、距离等特性,调制实际录取的回波数据,生成与态势设置参数相应的模拟回波数据,能够对信号处理操作和抗干扰操作做出响应。通过对视频回波进行仿真,由终端显示画面可知模拟的回波数据具有较高的逼真度,经测试模拟视频回波能够被雷达显控终端识别。     

对空情报雷达的费用-效能分析

 本文目的是研究对空情报雷达的全寿命费用与效能之定量评价。首先分析该类雷达全寿命费用的组成。其次着重研究和推导了该类雷达性能和效能的数学表达式。最后统计和计算了多种雷达的费用、性能、效能与费效比的数值,绘制了发展曲线,讨论了这些计算和曲线在雷达总体工程中的应用。     

GPS信号FFT自适应抗干扰技术的FPGA工程实现

针对自适应抗干扰技术展开研究,提出了易于FPGA实现的FFT自适应窄带抗干扰技术.这种方法减小了数字信号处理部分的计算量,提高了系统处理的实时性,降低了系统的复杂程度.实验表明在有宽带干扰存在的情况下,使用所提出的方法可以自适应检测并剔除窄带干扰.与GPS接收机的对接测试表明,该技术能大大提高接收机的抗干扰能力.     

一种软件质量度量模型的研究与应用

软件质量度量是软件工程方面的研究重点之一.通过量化的手段对软件产品进行度量和评价是最有效的质量保证手段.本文提出了软件质量度量模型,根据标准的评价过程模型对其进行了分析,从而确立了质量特性、质量子特性、度量特性和度量标准,并给出了这些特性的之间的关系以及它们的权值.然后运用一组公式对度量方法进行了表示并提出了该模型的应用.本文为软件质量度量提供了一套可行的定量评价方法.     

干扰机应对自适应捷变频雷达的一种干扰方法

雷达干扰机与雷达抗干扰相互促进发展,现在自适应捷变频雷达具有很强的抗窄带瞄准式干扰和宽带阻塞式干扰的能力。文章中提出了现有干扰机对自适应捷变频雷达实施干扰的一种新方法及实施方案——频谱拖引。     

末制导雷达抗舷外有源诱饵干扰研究

针对舷外有源雷达诱饵干扰末制导雷达的原理,提出了末制导雷达发射复杂信号对抗舷外有源雷达诱饵的方法,建立了发射信号模型,并从时域参数测量和时频分析两方面仿真分析了发射信号的反侦察能力;同时,对末制导雷达去干扰能力进行了仿真分析,验证了此种发射信号抗舷外有源雷达诱饵的有效性。     

一种新的雷达抗干扰视频处理方法

针对雷达的干扰环境,提出了一种新的雷达抗干扰视频处理系统,分析了抗各种干扰的原理,并给出了该系统的实现方法.     

基于神经网络的雷达抗干扰效能评估方法

雷达抗干扰效能是衡量雷达设备性能的重要指标,如何准确、客观、快捷地评估雷达抗干扰效能,对雷达、干扰双方均具有重要的现实意义。文章通过对雷达传统的抗干扰效能加权评估方法的分析,提出了基于神经网络的雷达抗干扰效能综合评估方法,并将该评估方法应用于雷达接收机抗干扰的技术等级评判实例中。实例结果表明,该评估方法能客观、定量地评估雷达抗干扰效能,具有一定的实用性。     

CESM-a new category of radar ECCM

Radar ECCM techniques are well known. Heretofore the listed ECCM effects have generally been to counteract the effects of ECM. This approach is one of attempting to cure an illness, rather than preventing it. Modem ECM systems usually include an ESM receiver to detect the radar signal, identify it by its emission characteristics, assess its importance, select the proper ECM, and signal to initiate ECM. If the ESM receiver detection of the radar signal can be delayed/denied, or the identification be confused, either the wrong ECM may be applied, or delayed. The radar may thus not be confronted with timely, proper ECM. Radar operation may therefore be possible. This paper introduces and defines CESM, a new category of radar ECCM. There are two principles of CESM-those which delay/deny ESM receiver detection, and those which confuse/impede signal identification. Illustrative examples of CESM techniques/operating techniques are given. It is shown that many CESM techniques may have multiple roles by impeding detection, impeding identification, and also diluting effects of ECM     

ECCM capabilities of an ultrawideband bandlimited random noise imaging radar

Investigated here is high-resolution imaging of targets in noisy or unfriendly radar environments through a simulation analysis of the ultrawideband (UWB) continuous-wave (CW) bandlimited random noise waveform. The linear FM chirp signal was selected as a benchmark radar waveform for comparison purposes. Simulation of the recovery of various types of target reflectivity functions (TRFs) for these waveforms were performed and analyzed. In addition, electronic counter-countermeasure (ECCM) capabilities for both types of systems were investigated. The results are compared using the error between the interference (jamming)-free recovered TRF and the recovered TRF under noisy conditions as a function of the signal-to-interference/jamming ratio (SIR/SJR). Our analysis shows that noise waveforms possess better jamming immunity (of the order of 5-10 dB improvement over the linear FM chirp) due to the unique radar correlation processing in the receiver.     

Resolution and synthetic aperture characterization of sparse radar arrays

The concept of radar satellite constellations, or clusters, for synthetic aperture radar (SAR), moving target indicator (MTI), and other radar modes has been proposed and is currently under research. These constellations form an array that is sparsely populated and irregularly spaced; therefore, traditional matched filtering is inadequate for dealing with the constellation's radiation pattern. To aid in the design, analysis, and signal processing of radar satellite constellations and sparse arrays in general, the characterization of the resolution and ambiguity functions of such systems is investigated. We project the radar's received phase history versus five sensor parameters: time, frequency, and three-dimensional position, into a phase history in terms of two eigensensors that can be interpreted as the dimensions of a two-dimensional synthetic aperture. Then, the synthetic aperture expression is used to derive resolution and the ambiguity function. Simulations are presented to verify the theory.     

Tracking Performance of a Monopulse Radar in the Presence of Multiple Targets

The equations derived by A. J. Rainal for the probability density function of the angle error output of a monopulse radar excited by a Gaussian signal and Gaussian thermal noise are generalized to include the presence of multiple targets. The examples given demonstrate the radar's behavior for various combinations of target and noise parameters.     

有源对消隐身系统设计研究

针对有源对消隐身要求的系统延时短、反应速度快、信号参数测量和对消波幅相控制精度高的特点,设计了一个基于相控阵技术、数字射频存储器(DRFM)和现场可编程门阵列(FPGA)的有源对消系统。为了解决目标雷达散射截面计算量太大、不能有流水线延迟和难以实现实时计算等问题,采用离线计算的方法,预先建立目标的全向雷达散射截面(RCS)数据库、杂波数据库和噪声数据库,由FPGA根据测得的雷达信号参数在数据库中查找到相应的目标回波数据,实时调整对消波的幅度和相位,使对方的雷达接收机始终处于合成方向图的零点。最后通过仿真计算验证了该设计方案的有效性。