Multistage partially adaptive STAP CFAR detection algorithm

A new method of partially adaptive constant false-alarm rate (CFAR) detection is introduced. The processor implements a novel sequence of orthogonal subspace projections to decompose the Wiener solution in terms of the cross-correlation observed at each stage. The performance is evaluated using the general framework of space-time adaptive processing (STAP) for the cases of both known and unknown covariance. It is demonstrated that this new approach to partially adaptive STAP outperforms the more complex eigen-analysis approaches using both simulated DARPA Mountain Top data and true pulse-Doppler radar data collected by the MCARM radar     

On adaptive multiband signal detection with GLR algorithm

An adaptive multiband detector based on the principle of the generalized likelihood ratio test (GLR) is presented. Its detection performance is studied and compared with that of the corresponding single-band GLR detector. The multiband detector is shown to significantly outperform the single-band under the chosen system constraint, especially when the amount of data available from a single frequency band is severely limited by the environment     

On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment     

涡轮泵实时故障检测的改进自适应相关阈值算法

1引言火箭发动机在飞行使用之前,需要分析试车振动数据以评估发动机的性能与状态[1]。涡轮泵是液体火箭发动机中最复杂故障概率最高的部件[2],而振动是涡轮泵故障的重要起因[3],因此,涡轮泵振动数据的分析显得尤为重要。目前,它的主要分析方法有时域统计[4]、频谱分析[5]、神经     

涡轮泵实时故障检测短数据均值自适应阈值算法

为了实时监控液体火箭发动机涡轮泵的状态，提高其安全性，降低其故障带来的破坏程度，提出了短数据均值自适应阈值算法(SDM—ATA)，建立了实时故障检测的统计学模型、研究了阈值区间均值与方差的自适应计算及其带宽系数的自适应训练、故障综合决策逻辑，以及故障数据对阈值贡献的踢除等方法，并利用某型火箭发动机地面试车涡轮泵振动测量数据和某型转子试验平台实时测量数据对该算法进行离线和实时在线故障检测试验验证。结果表明，SDM—ATA没有发生误检测情况，并具有实时故障检测的能力。     

Analysis of an adaptive algorithm for unbiased multipath time delay estimation

The multipath equalization time delay estimator (METDE) provides an adaptive approach for estimating the difference in arrival times of a signal received at spatially separated sensors as well as the multipath channel characteristics. However, the parameter estimates of the METDE are biased in the presence of noise. The METDE algorithm is improved for unbiased parameter estimation via minimizing a modified cost function. Convergence behaviors and variances of the system variables of the amended method are derived. Computer simulations are included to corroborate the theoretical analysis and to evaluate the adaptive multipath delay estimation performance of the proposed algorithm.     

An adaptive array detector with mismatched signal rejection

An adaptive detection algorithm with a sensibility parameter for rejecting unwanted signals is presented. This algorithm is a simple modification of the generalized likelihood ratio (GLR) detector (or test) for detecting a signal in zero mean Gaussian noise with unknown correlation matrix. Specifically, the adaptive detection algorithm is obtained by introducing an arbitrary positive scalar, which is called the sensitivity parameter, into the GLR detector as a multiplier of an already existing quadratic term. The GLR detector then becomes a special case of this detector for the unity sensitivity parameter. It is shown that the sensitivity parameter controls the degree to which unwanted signals are rejected. From numerical examples, it is demonstrated how the sensitivity parameter can be chosen such that unwanted signals, can be rejected while maintaining acceptable detection loss for slightly mismatched signals. Further insight into previous work on adaptive detection is also given     

Likelihood-ratio detection of frequency-hopped signals

The optimum system for intercepting frequency-hopped signals uses a channelized receiver and a likelihood-ratio test (LRT). Previous results on the performance of the optimum system have been based on Gaussian assumptions, which are generally valid for transmissions having large time-bandwidth areas. Results, obtained by Monte Carlo simulation, for relatively small time-bandwidth transmissions are given here. The signal model is a simple one known as “pure frequency hopping.” Comparisons with the LRT show that energy detection loss increases when the time-bandwidth product of the transmission is increased by increasing the number of frequencies, even when the number of pulses is also increased. The loss decreases when only the number of pulses is increased. Over the parameter range observed, binary detection loss tends to increase with the number of pulses and decrease with the number of frequencies. Results are included for a moving-window version of the LRT. A parameter of the LRT is the signal-to-noise ratio (SNR). The effect of using a design value not equal to the true SNR is shown     

Robust detection of small stochastic signals

We consider the problem of detecting a stochastic signal in white not-necessarily-Gaussian noise, using vector valued observations. The locally optimal detector is presented and its performance evaluated. The least-favorable signal spectrum and noise density (over specified classes) are found, and it is shown that the detector using these least-favorable assumptions is minimax robust. The class of spectra is that of any stochastic signal of specified power whose spectrum can be bounded from above and from below by two given positive functions. The class of densities is the ε-contamination model. We present examples of the performance achievable with the robust detector in one of these the spectral uncertainty class corresponds to the unknown Doppler shift of a radar return signal. It is demonstrated that the standard matched-filter's performance degradation with increasing Doppler shift can be avoided almost entirely through use of the robust processor     

Performance of an adaptive feature-based processor for a wideband ground penetrating radar system

A two-stage algorithm for landmine detection with a ground penetrating radar (GPR) system is described. First, 3-D data sets are processed using a computationally inexpensive pre-screening algorithm which flags potential locations of interest. These flagged locations are then passed to a feature-based processor which further discriminates target-like anomalies from naturally occurring clutter. Current field trial (over 6500 square meters) and blind test results (over 39000 square meters) are presented and these show at least an order of magnitude improvement over other radar system-based detection algorithms on the same test lanes.     

Switched adaptive active disturbance rejection control of variable structure near space vehicles based on adaptive dynamic programming

Based on the switched nonlinear system, a switched adaptive Active Disturbance Rejection Control(ADRC) law is proposed for the Variable Structure Near Space Vehicle(VSNSV) with unknown uncertainties and external disturbances. The reduced-order Extended State Observers(ESOs) are constructed for the attitude angle system and the angular rate system to estimate the total disturbance in real time. With the extended state introduced to counteract the effects of uncertainties and disturbances, a systematic procedure is presented for the synthesis of the switched adaptive ADRC strategy. Rigorous proof shows that the estimation errors of the reduced-order ESOs would converge to a small neighborhood of zero in finite time, and that the output of the closedloop system can track a given signal stably for a class of switching signals with average dwell time via the proposed approach. The variable gain control strategy based on Adaptive Dynamic Programming(ADP) with the actor-critic structure is also designed to improve the dynamic performance of the system. Simulation results verify the effectiveness and advantage of the proposed control scheme.     

一种基于冗余测量的自适应卡尔曼滤波算法

针对目前自适应滤波算法的不足,在测量系统量测噪声方差未知的情况下,设计了一种基于冗余测量的自适应卡尔曼滤波(RMAKF)算法。通过对系统冗余测量值的一阶、二阶差分序列进行有效的统计分析,可以准确估计系统量测噪声统计特性,进而在滤波过程中自适应调节噪声方差阵R,提高滤波精度。以全球定位系统/惯性导航系统(GPS/INS)松组合导航系统为对象进行了仿真实验,结果表明该算法在测量系统噪声特性未知或发生改变时,可对其进行准确估计,在采用低精度惯性器件情况下,滤波结果较其他主要自适应卡尔曼滤波算法有较明显的改进。     

A self-normalizing gradient search adaptive array algorithm

A method is described to normalize the step parameter and perturbation amount used for gradient search adaptive algorithms. The step normalization assures rapid stable convergence. The perturbation normalization also assures rapid stable convergence and limits the output perturbation noise to a level below thermal noise. The normalizations are computationally simple and are consistent with the use of a single receiver at the adaptive array output. Results are presented to verify the robustness of the technique.<>     

Application of Gram-Schmidt algorithm to fully adaptive arrays

The Gram-Schmidt orthogonalization (GSO) algorithm has excellent numerical performance and is readily applicable to systolic implementations such as in a field of adaptive cancellation systems. A modified GSO algorithm for a fully adaptive array is proposed and computer simulations show that the proposed algorithm gives superior performance. A systolic implementation of the proposed GSO algorithm for fully adaptive array is presented. A feedback mode GSO algorithm for use with analog weights is also presented and has been shown to have excellent performance in the presence of weight errors     

A comparison of two adaptive detection schemes

Two schemes for adaptive detection are compared: Kelly's generalized likelihood ratio test (GLRT) and the mean level adaptive detector (MLAD). Detection performance, P_D, is predicted for the two schemes under the assumptions that the input noises are zero-mean complex Gaussian random variables that are temporally independent but spatially correlated; and the amplitude of the desired signal is Rayleigh distributed. P_D is computed as a function of the false alarm probability, the number of input channels, the number of independent samples per channel, and the matched filtered output signal-to-noise (S/N) power ratio. In this analysis the GLRT is shown to have better detection performance than the MLAD. The difference in detection performance increases as one uses fewer input samples. However, the required number of samples necessary to have only a 3 dB detection loss for both detection schemes is approximately the same. This is significant since for the present, the MLAD is considerably less complex to implement than the GLRT     

Minimax detection for signals with unknown parameters

Minimax detectors are often used for the detection of signals with unknown parameters in additive white Gaussian noise. Several minimax strategies are discussed for both real and complex signals, including one based on the least favorable distribution of the unknown parameters and a second, distribution-free method based on the worst case parameter values. Also discussed are the relationships between these minimax detectors and equal correlation filters for real signals and equal deflection quadratic detectors for complex signals. Conditions are given under which the two different minimax strategies produce identical detectors     

Spatial adaptive subspace detection in OTH radar

The work presented here addresses the problem of target detection against spatially structured interference composed of jamming plus noise, where for practical reasons, the received target wavefront may also deviate from the traditional plane wave model. This detection problem arises in over-the-horizon (OTH) radar systems where spatially distributed targets often compete for detection against directional interference that is spread over the entire range-Doppler search space. Conventional detection processing schemes are compared with a recently proposed adaptive subspace detector (ASD) that takes both the spatial structure of the interference and the possibility of target wavefront distortions into account. Experimental array data recorded by the Jindalee sky-wave and Iluka surface-wave OTH radar systems, located in central and northern Australia respectively, is used to evaluate detection performance.     

Blind adaptive decision fusion for distributed detection

We consider the problem of decision fusion in a distributed detection system. In this system, each detector makes a binary decision based on its own observation, and then communicates its binary decision to a fusion center. The objective of the fusion center is to optimally fuse the local decisions in order to minimize the final error probability. To implement such an optimal fusion center, the performance parameters of each detector (i.e., its probabilities of false alarm and missed detection) as well as the a priori probabilities of the hypotheses must be known. However, in practical applications these statistics may be unknown or may vary with time. We develop a recursive algorithm that approximates these unknown values on-line. We then use these approximations to adapt the fusion center. Our algorithm is based on an explicit analytic relation between the unknown probabilities and the joint probabilities of the local decisions. Under the assumption that the local observations are conditionally independent, the estimates given by our algorithm are shown to be asymptotically unbiased and converge to their true values at the rate of O(1/k/sup 1/2/) in the rms error sense, where k is the number of iterations. Simulation results indicate that our algorithm is substantially more reliable than two existing (asymptotically biased) algorithms, and performs at least as well as those algorithms when they work.     

Performance enhancement of a multiple model adaptive estimator

We describe performance improvement techniques for a multiple model adaptive estimator (MMAE) used to detect and identify control surface and sensor failures on an unmanned flight vehicle. Initially failure identification was accomplished within 4 s of onset, but by removing the “β dominance” effects, bounding the hypothesis conditional probabilities, retuning the Kalman filters, increasing the penalty for measurement residuals, decreasing the probability smoothing, and increasing residual propagation, the identification time was reduced to 2 s