中国航天的“太空长征”

2012年12月13日16时30分,飞离拉格朗日L2点195天的嫦娥二号卫星,在北京航天飞行控制中心的精确控制下,成功飞越探测图塔蒂斯小行星,抵达距离地球约700万千米远的深空,在国际上首次实现对该小行星近距离的探测,将中国航天"太空长征"的轨道铺向小行星。     

“龙江2号”月球轨道微卫星定轨分析

微纳卫星深空探测任务中,通常所分配的测控资源有限,因此有必要对有限测控资源条件下微纳卫星的定轨精度进行分析。以微纳卫星深空探测为背景,采用"龙江2号"微卫星的轨道测量数据对其定轨精度进行了分析。"龙江2号"微卫星只有USB轨道测量数据,且环月段测控资源相对紧张,每天有两站跟踪,共约3～4 h的轨道测量数据。首先介绍了"龙江2号"微卫星飞行任务及其飞行过程中影响测定轨的因素;其次给出了定轨的动力学模型,对微卫星地月转移段的定轨精度进行了分析;最后通过分析摄动力、动量轮卸载以及数据弧段长度的影响,给出了微卫星环月阶段所使用的定轨策略,并通过重叠弧段比较的模式,给出了微卫星环月段的定轨精度。研究结论可以为后续微纳卫星深空探测任务提供有益参考。     

双站跟踪模式下“嫦娥4号”中继星定轨仿真分析

位于地月平动点的探测器因为较差的观测几何,需要地基USB/UXB与天文VLBI长时间的联合跟踪数据获取稳定精确的轨道。提出了利用中国深空网双站共视跟踪平动点探测器,获取双程、三程测距及VLBI测量数据,解算探测器精确轨道的模式。以"鹊桥"卫星为分析对象,首先评估中国深空网对"鹊桥"的跟踪能力。然后分析不同观测组合模式下的定轨计算精度。结果表明:双站共视约束下,深空站每天对"鹊桥"跟踪弧长大于5 h;使用长于6 h的双站跟踪数据进行定轨,系统差的解算更有利于轨道精度提升;跟踪时长超过2天时,必须在轨道解算的同时估计光压系数,并有望实现优于百米的轨道精度。     

"嫦娥一号"卫星轨控标定方法研究与实现

在航天测控任务中,对轨控效果进行标定并合理利用可以实现更为精准的轨道控制.提出了一种综合利用控前控后精密轨道、轨控过程遥测姿态数据、遥测加速度计测量数据对沉底发动机、轨控发动机、加速度计刻度系数进行标定的方法;介绍了该方法在中国首次月球探测任务中的应用情况;最后分析了标定结果对定轨及定姿精度的敏感程度,从而在理论上进一步说明在后续深空探测中利用精密轨道进行轨控标定的可行性和重要性.     

USB观测数据时标偏差影响分析与评估

USB系统是目前中国载人航天和月球探测任务的主要测控网.由于USB测量设备本身以及无线电信号传播媒介以及其他误差因素的影响,USB测量数据中包含了各种误差,需要在定轨时对观测数据进行误差修正.通常,例行的USB测量误差修正包括对流层折射修正、电离层延迟修正和通道延迟修正,但对定轨过程中可能影响观测数据计算精度的时标偏差并未作修正.针对USB测距测速观测数据,详细研究了观测数据时标偏差对观测值计算精度的影响,分析了误差影响特性,建立了相应的误差修正模型,并通过与卫星星历偏差对USB测距测速观测值计算精度影响特征的比较,发现时标偏差对测量的影响与轨道沿迹误差对观测计算值的影响等效,这使得在定轨过程中分离时标偏差的难度较大.提出了基于星载GPS定位数据分离时标偏差的方法,并利用某次任务的实测数据,分离出了该次任务中USB测量的时标偏差.最后针对目前USB数据时标偏差影响和观测误差量级相当的情况,建议将目前的观测时标精度提高到优于0.1ms的水平,使得时标偏差的影响降低到比观测误差小一个量级的水平.     

华丽转身的嫦娥二号

2012年12月13日,备受世人瞩目的嫦娥二号卫星,与距离地球约700万千米的图塔蒂斯小行星交会,首次实现飞跃小行星探测,我国成为第4个探测小行星的国家。从成功发射到全面实现既定的工程目标和科学探测任务;从设计寿命期满到拓展试验、再拓展试验。嫦娥二号好比一只春蚕,在生命将要完结的时刻,依然要吐     

嫦娥系列探月卫星无线电科学实验简介

在"嫦娥1/2/3号"系列探测任务中开展了行星无线电科学探测实验,这些工作包括:使用天文VLBI技术对探测器进行工程和科学测轨、定位观测,开环和闭环测速测距观测,基于微波观测重构和优化月球重力场模型,通过重力异常揭示质量瘤和撞击盆地。星载或器载主/被动雷达设备还用于探测月壤和月球内部结构。在"嫦娥2号"任务中,实现了对拉格朗日平动点利萨如轨道飞行的测控,以及对图塔蒂斯小行星的飞掠探测。在"嫦娥3号"任务中,实现了多通道开环3向相位测距和多普勒测速技术。该月球无线电相位测距技术LRPR作为一种新的空间测量技术,可以用于测定台站的位置、潮汐、星体的自转特性。还可以与月球激光测距技术LLR融合,监测月球动力学运动变化,并有潜力用于未来的火星探测任务。     

钟差和动力学参数联合约束下的北斗卫星轨道快速确定

受地球非球形引力、第三体摄动和太阳光压等摄动因素的影响,导航卫星位置存在长周期变化趋势,需要定期对导航卫星进行轨道机动,以保持卫星轨位和导航服务区.导航卫星机动后的定轨,特别是GEO卫星,其频繁轨控后的轨道快速确定问题,是制约卫星可用度和导航系统服务性能的重要因素.在基于伪距相位数据的轨道测定中,轨道与钟差的统计相关是制约卫星轨道快速确定的关键因素,特别是在观测弧段短的情况下,待估参数之间的相关性更强,动力学参数估计结果严重失真会导致轨道预报精度衰减明显.当卫星钟差与测站钟差通过外部手段高精度测定后,可以减少待估参数的估计,同时利用长弧定轨的动力学与运动学参数先验信息,对短弧定轨模式进行参数约束,卫星定轨精度将有很大的提升空间.通过钟差与力学参数的联合约束,实现了北斗卫星短弧快速定轨,解决了卫星机动后的轨道快速确定问题,SLR评估的卫星机动后4 h定轨外符视向精度优于0.71 m,比常规方法提高了3倍,预报1 h轨道视向精度为1.89 m,用户等效距离误差(UERE)精度达到1.85 m.     

导航卫星的地面站定轨算法

导航星座轨道的长期保持是星座导航系统运营管理的重要组成部分,而现有的导航卫星地面定轨算法又存在精度不高或计算量大不适合工程应用的问题。为此,研究了单向、被动测量模式的导航卫星地面定轨算法。基于单向伪距观测,将导航卫星钟差参数作为状态量,推导了滤波算法的状态方程、测量方程,并最终建立了滤波器模型。以不同轨道面的4颗GPS导航卫星为例进行了2天的仿真试验,考虑卫星的可见性仿真中加入了测量中断,并设计在测量恢复后重启滤波算法。仿真结果表明,4颗卫星的轨道位置估计精度可以达到米级,钟差随机偏差的估计精度可以达到纳秒级,并且在滤波中断后重启滤波器,仍然可以达到此估计精度,表明此定轨算法具有收敛性和稳定性。     

2016HO3探测任务星载光学观测量建模及定轨

以中国首次小行星探测任务为背景，根据星载相机获取的光学影像构造三种观测量，分别为小行星相对于航天器的高度角和方位角、赤经赤纬以及探测器与行星/小行星之间的夹角，分析了其在探测器定轨中的作用。仿真定轨结果表明，观测时长为100 h，探测器三轴位置误差小于50 km，满足工程上对巡航段的轨道精度要求，但x和y方向的位置和速度分量具有较强自相关性。此外还发现，使用单一观测数据类型比联合观测量的定轨精度低3～4个量级，第三类观测量相对于其他两类观测量在定轨精度方面具有显著作用，这表明在2016HO3探测中，利用太阳系大天体的位置信息有助于约束探测器轨道，提高探测器的定轨精度。     

Proposal of application of same beam VLBI measurements in precision orbit determination of lunar orbiter and return capsule and lunar gravity field simulation in Chang’E-3 mission

High accuracy differenced phase delay can be obtained by observing multiple point frequencies of two spacecraft using the same beam Very Long Baseline Interferometry (VLBI) technology. Its contribution in lunar spacecraft precision orbit determination has been performed during the Japanese lunar exploration mission SELENE. In consideration that there will be an orbiter and a return capsule flying around the moon during the Chinese lunar exploration future mission Chang’E-3, the contributions of the same beam VLBI in spacecraft precision orbit determination and lunar gravity field solution have been investigated. Our results show that the accuracy of precision orbit determination can be improved more than one order of magnitude after including the same beam VLBI measurements. There are significant improvements in accuracy of low and medium degree coefficients of lunar gravity field model obtained from combination of two way range and Doppler and the same beam VLBI measurements than the one that only uses two way range and Doppler data, and the accuracy of precision orbit determination can reach meter level.     

火星探测VLBI测定轨技术

我国将于2020年首次发射由环绕器和着陆巡视器组成的火星探测器,火星探测器的跟踪及精密测定轨是完成工程任务和科学探测的基础。火星探测器的跟踪和测定轨,目前主要采用基于地面无线电测量的测距、测速和甚长基线干涉VLBI测角3种手段。主要针对VLBI技术予以介绍,主要内容为:△DOR型VLBI技术在国内外的应用情况、火星探测器VLBI测定轨技术分析、基于同波束VLBI的火星车定位技术、火星探测器VLBI观测等。这些内容对我国的火星探测器测定轨有重要的应用价值。     

Chang’E-1 precision orbit determination and lunar gravity field solution

In this paper we present results assessing the role of Very Long Baseline Interferometry (VLBI) tracking data through precision orbit determination (POD) during the check-out phase for Chang’E-1, and the lunar gravity field solution CEGM-01 based on the orbital tracking data acquired during the nominal phase of the mission. The POD of Chang’E-1 is performed using S-band two-way Range and Range Rate (R&RR) data, together with VLBI delay and delay rate observations. The role of the VLBI data in the POD of Chang’E-1 is analyzed, and the resulting orbital accuracies are estimated for different solution strategies. The final orbital accuracies proved that the VLBI tracking data can improve the Chang’E-1 POD significantly. Consequently, CEGM-01 based on six-month tracking data during Chang’E-1 nominal mission phase is presented, and the accuracy of the model is assessed by means of the gravity field power spectrum, admittance and coherence between gravity and topography, lunar surface gravity anomaly and POD for both Chang’E-1 and Lunar Prospector (LP). Our analysis indicates that CEGM-01 has significant improvements over a prior model (i.e. GLGM-2), and shows the potential of Chang’E-1 tracking data in high resolution lunar gravity field model solution by combining with SELENE and LP tracking data.     

基于机动力模型的GEO卫星恢复期间定轨

北斗卫星导航系统(BDS)中GEO卫星频繁的轨道机动对高精度、实时不间断的导 航服务需求提出了更高要求, 如何在短弧跟踪条件下提高GEO卫星轨道快速 恢复能力, 是提升导航系统服务精度的关键因素. 针对该问题, 本文提出了基 于机动力模型的动力学定轨方法, 尝试利用高精度的C波段转发式测距数据, 辅 以机动期间的遥测遥控信息建立机动力模型, 联合轨控前后的观测数据进行动 力学长弧定轨. 利用BDS中GEO卫星实测数据进行了定轨试验与分析, 结果表明, 恢复期间需要采用解算机动推力的定轨方法, 联合机动前、机动期间和机 动后4h数据定轨的轨道位置精度在20m量级, 径向精度优于2.5m. 该方 法克服了短弧跟踪条件下动力学法定轨和单点定位中的诸多问题, 提供了解决 GEO卫星机动后轨道快速恢复问题的技术方法.      

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

Three-dimensional tracking of a lunar satellite with differential Very-Long-Baseline-Interferometry

Lunar gravimetry mission in the Japanese lunar exploration project SELENE (Selenological and Engineering Explorer) is characterized by inter-satellite tracking by means of a relay satellite in a high eccentric orbit, combined with differential Very-Long-Baseline-Interferometry (ΔVLBI) and conventional 2-way Doppler tracking. ΔVLBI provides information on the satellite position and velocity complementary to conventional range and range rate measurement, and allows us to measure lunar gravitational accelerations in all the three components. In this article, ΔVLBI and 2-way Doppler numerical simulation results are compared to those obtained from 2-way Doppler observations only, so that we can evaluate the contribution of ΔVLBI to the SELENE lunar gravimetry mission.     

北斗卫星导航系统实时定轨与钟差处理策略

目前鲜有对北斗卫星导航系统（BeiDouNavigationSatelliteSystem,BDS）实时精密定轨与钟差确定的研究,文章提出了BDS实时轨道与实时钟差处理策略,包括了观测与动力学模型、实时轨道与实时钟差处理流程与评估方法。尤其对于实时钟差,为了提高计算效率,联合使用两个独立并行的线程估计非差绝对钟差和历元间相对钟差。利用多模全球卫星导航系统试验(MGEX)与全球连续检测评估系统（iGMAS）实测数据进行了北斗实时轨道与钟差解算,BDS实时轨道径向平均精度对于GEO卫星优于20cm,对于IGSO与MEO一般优于10cm;钟差精度对于GEO卫星为0.5~4.5ns,对于IGSO／MEO为0.2~2.0ns。基于目前的轨道与钟差结果,实时精密单点定位（PrecisePointPositioning,PPP）结果可以达到分米量级。     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.