Low cost satellite ground control facility design

A design approach common to the areas of satellite operations command and control, tracking, subsystem analysis, system planning and scheduling, orbit determination and maintenance, and data routing and control is discussed. Specific satellite mission applications and operations are isolated from the remainder of the design to allow application to a broad variety of satellite systems. Discussions of specific satellite missions are limited to the context of understanding the general magnitude and scope of what a ground control facility is required to support. By isolating the common satellite operational functions, a low cost generic approach that allows for phased implementation of system changes with minimal impact to on-orbit assets and mission performance is developed. The goals of this approach are to provide the capability for growth, maintainability, and operability of the satellite system. A brief discussion of satellite systems followed by the introduction of the general function of any satellite control facility sets the stage for the overall design approach. The factors that define the design along with the key design features are presented, with a discussion of each product available in each functional area     

小卫星编队飞行队形设计与轨道要素确定

用两体相对运动的线性Hill方程进行了小卫星编队飞行队形的初步设计，并给出编队飞行中各绕飞小卫星轨道要素的确定过程，以空间圆形编队为例，在未考虑摄动情况下，通过仿真验证了Hill方程在小卫星编队队形初步设计中的有效性。     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

Use of MOBITEX wireless wide area networks as a solution toland-based positioning and navigation

The emergence of land-based positioning and navigation systems is the direct result of advancements in technologies relating to geographic information, wireless data communication, and navigation. The increasing demand for these systems has stimulated their rapid development. This paper identifies the wide variety of land-based positioning and navigation systems and classifies them into five groups. The basic system elements that are required in all land-based positioning and navigation systems are also discussed. A proposed system infrastructure that supports the five types of land-based positioning and navigation systems is described. The specific technologies integrated in this proposed infrastructure include the Global Positioning System (GPS), differential GPS, and the MOBITEX wireless wide area packet data networks. Real-time wireless mobile data communication is a key component of any land-based positioning and navigation system. Finally, the evaluation criteria necessary for field testing a pilot land-based positioning and navigation system are presented. This pilot system is used to determine the feasibility and effectiveness of the proposed system design     

Design and integration of a solar AMTEC power system with anadvanced global positioning satellite

A 1,200-W solar AMTEC (alkali metal thermal-to-electric conversion) power system concept was developed and integrated with an advanced global positioning system (GPS) satellite. The critical integration issues for the SAMTEC with the GPS subsystems included: (1) packaging within the Delta II launch vehicle envelope; (2) deployment and start-up operations for the SAMTEC; (3) SAMTEC operation during all mission phases; (4) satellite field of view restrictions with satellite operations; and (5) effect of the SAMTEC requirements on other satellite subsystems. The SAMTEC power system was compared with a conventional planar solar array/battery power system to assess the differences in system weight, size, and operations, Features of the design include the use of an advanced multitube, vapor anode AMTEC cell design with 24% conversion efficiency, and a direct solar insolation receiver design with integral LiF salt canisters for energy storage to generate power during the maximum solar eclipse cycle, The modular generator design consists of an array of multitube AMTEC cells arranged into a parallel/series electrical network with built-in cell redundancy. Our preliminary assessment indicates that the solar generator design is scaleable over a 500 to 2,500-W range. No battery power is required during the operational phase of the GPS mission. SAMTEC specific power levels greater than 5 We/kg and 160 We/m² are anticipated for a mission duration of 10 to 12 years in orbits with high natural radiation backgrounds     

一种长期稳定的卫星编队队形优化设计方法

 对于卫星编队飞行设计长期稳定以节省控制燃料的队形是一项非常重要的工作，本文提出了一种队形长期稳定的优化设计方法。首先利用Hill方程设计出满足任务要求的相对位置和相对速度的约束关系，以剩下的自由相对位置或相对速度作为优化变量。优化目标选择为主从星在J2摄动下的各平均轨道根数相对漂移率最小。文中的优化算法采用改进的遗传算法，遗传算法作为一种通用的全局最优随机搜索算法，在解决一些复杂问题时它还存在着过早收敛和收敛速度慢的缺陷，针对此问题，本文提出一种改进的遗传算法。仿真结果表明利用这种优化设计方法设计的队形在各种摄动力下能够长期保持稳定。     

Optical fiber geostationary tether satellite (F-GTS) system design

The geostationary satellite orbit (GSO) is a limited natural resource and its efficient utilization is very important. The geostationary tether satellite (GTS) system has a number of satellites aligned along the local vertical on either side of the nominal geostationary position. The system is synchronized with the Earth's rotation and all the various altitudes are geostationary, Furthermore, optical-fiber geostationary tether satellite (F-GTS) system has been introduced to improve the GTS system, with regard to increment of communication capacity, simplification of interference paths and intersatellite link (ISL) capability. The F-GTS system design is discussed with the purpose of achieving a realistic satellite network. Three frequency bands, i.e., the 14/11, 30/20, and 50/40 GHz bands, are examined for selection of the optimum frequency band. The F-GTS system example for covering the service areas in Japan is discussed with regard to satellite antenna diameter, communication capacities, etc. To apply the F-GTS system to the whole GSO, the diagonal azimuth orbit arrangement method is proposed for low latitude service areas. Moreover, the F-GTS communication capacity and total communication capacity, when the F-GTS systems are applied to the whole GSO, are also examined.     

构建卫星状态诊断系统的一种实现方法

简要分析了卫星状态诊断专家系统在卫星管理工作中的必要性,说明了其应用范围和基本功能,着重介绍了该系统的设计与实现方法,说明了该系统在卫星管理过程中的应用情况。     

Verifying command sequences for satellite systems

A formal basis for the design of a checker used in validating safe schedules and in selecting error recovery schedules for satellite control systems is presented. This design includes a high-level specification of checker behavior and properties (called flight rules) of safe schedules. Specifications are written in timed linear logic (TLL). Validation of schedules is performed in terms of real-time telemetry and deduction system proof rules. Telemetry (state information for satellite subsystems) serves as input to the checker. Detection of violation of a flight rule by the checker results in the selection of a contingency plan (error recovery schedule). The checker is illustrated by an example involving the TOPEX/Poseidon Oceanographic Satellite System     

平均轨道根数与密切轨道根数的互换

基于双行轨道根数和简化普适摄动算法,提出平均轨道根数与密切轨道根数的互换算法。以在轨Tan-DEM-X编队的双星为例进行仿真。与传统的只考虑J2项摄动短周期影响的转换算法相比,本文提出的互换算法精度更高：由平均轨道根数转换的密切轨道根数与STK 8软件给出的结果一致;由密切轨道根数转换的平均轨道根数与北美防空司令部公布的双行轨道根数一致。仿真结果表明该互换方法具有科学性和工程应用价值。     

A satellite interference location system using differential timeand phase measurement techniques

The design and development of a system for inferring the position of terrestrial satellite uplink stations using existing domestic satellites with minimal disruption to normal satellite operation are described. Two methods are presented by which a quantity measured at a terrestrial receiving site is mapped into a curve of possible uplink locations on the Earth's surface. One method involves measuring differential time delays of a single uplink signal observed through two adjacent spacecraft. The other uses a short baseline interferometer composed of the two cross-polarized and spatially separated antenna feeds aboard an affected satellite. A unique location is obtained by using an appropriate combination of the two methods. A system for measurement of the required differential delays and phases and experimental work performed to demonstrate the feasibility of the location methods are described     

分布式卫星干涉测高系统编队构形优化设计方法

 分布式卫星干涉合成孔径雷达（InSAR）编队构形设计是系统总体设计的关键问题。从系统测高性能优化角度出发,提出分布式InSAR编队优化设计一般方法,将其概括为求解一个优化问题,以主星带辅星群体制分布式InSAR为例建立目标函数,针对其星载双站、斜视、空间基线等特点建立测高精度与辅星轨道根数的关系,基于近似的相对运动数学模型对该优化问题进行简化,并采用遗传算法求解。在此基础上,对多颗卫星组成编队以提高系统测高性能提出了一种多星编队设计方法。仿真分析表明,经优化得到的编队测高性能要优于干涉车轮和钟摆编队,该结果验证了优化设计方法的有效性和正确性。     

Nonlinear adaptive spacecraft attitude control using solar radiation pressure

Spacecraft and interplanetary probes orbiting at high altitudes experience forces due to solar radiation pressure, which can be used for maneuvering. The question of large angle pitch attitude maneuvers of satellites using solar radiation torque is considered. For pitch axis maneuver, two highly reflective control surfaces are used to generate radiation moment. The solar radiation moment is a complex nonlinear function of the attitude and parameters of the satellite, the orbital parameters, and the deflection angles of the reflective control surfaces. It is assumed that the parameters of the satellite model are unknown. Based on a backstepping design technique, a nonlinear adaptive control law is derived for the control of the pitch angle. In the closed-loop system, the pitch angle asymptotically tracks prescribed reference trajectories. Simulation results are presented to show that the adaptive control system accomplishes attitude control of the satellite in spite of the parameter uncertainties in the system.     

1kW级肼电弧加热发动机工程样机研究

为了满足静止轨道卫星及中低轨道卫星降低重量、延长寿命的需要,北京控制工程研究所近年来开展了电弧加热发动机的研究工作,目前正在进行1kW级肼电弧加热发动机工程样机的研制。介绍了1kW级肼电弧加热发动机工程样机研制工作的进展情况。该项研制工作的目标是：完成电弧加热发动机的设计、加工和500h寿命试验。预期发动机功耗为1kW左右,比冲为4.5～5.5N.s/g,推力为75～150mN。目前已经完成了第一轮的发动机设计、加工和性能测试工作。出于安全性的考虑,目前的测试暂时是用N2和NH3的混合气体模拟肼进行的,测试获得了发动机的比冲、推力、效率等数据。在模拟肼的流量为18～30mg时,发动机的推力为100～150mN,比冲在5N.s/g左右,满足设计指标要求。预期采用单组元肼作为推进剂后,比冲将有所提高。     

Satellite Charges for a Mixed Pre-Demand-Assigned System

The problems of satellite charges with reduced G/T stations for different pre-assigned and demand-assigned modes of operation are considered. A mixed pre-assigned demand-assigned operation is assumed as a model, in which large standard stations use the demand-assigned system for their overflow traffic. Determination of the optimum percentage of overflow for each link and of the global satellite revenue and occupancy, in terms of a general traffic matrix, is carried out and then used in the specific case of the Atlantic satellites to establish demand-assignment and pre-assignment charges as a function of G/T, based on a cost per unit bandwidth criterion. The effects of various demand-assignment systems on the economic balance is also considered.     

GNSS无线电掩星大气探测混合星座设计

针对目前GNSS无线电掩星大气探测卫星星座参数依赖大量仿真计算进行统计选取的研究现状,通过将探测卫星星下点与大气测点间地心角距作为观测半径提出了一种虚拟“星—地”遥感假设,给出了一种崭新的掩星测点预估方法,具有计算速度快的特点.基于该方法推导了探测星座参数与大气探测覆盖性之间的极值相关特性,建立了GNSS无线电掩星大气探测卫星星座设计准则,并以GPS和BD为兼容性观测信源完成了GNSS掩星大气探测混合卫星星座设计.通过仿真试验,验证了设计方法的快速性和可行性,GPS+BD掩星大气探测混合星座每日可实现掩星探测量为COSMIC星座的3倍以上,12h内掩星测点全球分布均匀度提升12％.     

Ionospheric Time-Delay Algorithm for Single-Frequency GPS Users

The goal in designing an ionospheric time-delay correctionalgorithm for the single-frequency global positioning system userwas to include the main features of the complex behavior of theionosphere, yet require a minimum of coefficients and usercomputational time, while still yielding an rms correction of at least50 percent. The algorithm designed for this purpose, andimplemented in the GPS satellites, requires only eight coefficientssent as part of the satellite message, contains numerousapproximations designed to reduce user computationalrequirements, yet preserves the essential elements required to obtaingroup delay values along multiple satellite viewing directions.     

鲁棒性固定反馈增益阵控制系统设计

讨论了一种鲁棒性控制器的设计方法。此法已在总能量控制系统(TECS)的设计中得到应用。本文基于根平面理论来讨论这一问题,从而避免了复杂的数学计算,仅利用几何作图或计算机辅助设计,使控制器成为满足一定带宽和超调要求的鲁棒控制器。     

卫星星座结构自稳定设计研究

提出了卫星星座结构自稳定概念。在分析星座构型稳定性的基础上,将只考虑星座几何结构的星座优化设计结果与卫星轨道动力学相结合来设计星座构型初始参数以实现星座结构自稳定,推导了星座结构自稳定设计公式并设计了星座结构自稳定设计流程。对实例星座的结构自稳定设计进行了分析,结果表明,星座结构自稳定设计后其长期稳定性得到了很好的保持。