减少飞机对风切变敏感性的研究

本文用时域内改变加权阵Q方法,优化设计有风切变时飞机的下滑控制系统。在设计过程中将风切变强度v′_f作为系统中的一个变量,使设计出的系统对风切变强度的灵敏度减少,即系统具有鲁棒稳定性。为了比较,文中还用二次型性能指标优化设计同一个系统。另外对性能指标中加权阵Q和鲁棒矢量加权阵Q_5元素的选取作了探索。     

大飞机风切变探测告警系统

介绍了国内外在机载风切变告警系统方面的研究进展,通过对比国内外的研究情况,发现由于国内的需求不足,使得在具体产品的研究进展上与国外存在较大差距。由于中国大飞机研究项目的全面展开．也必然为包括机载风切变告警系统在内的、与大飞机有关的各种机载产品的发展提供了很好的机会。指出为了尽快弥补国内研究的差距,需在风切变建模、风切变探测及风切变告警系统的试飞验证方面做出进一步努力。     

Star recognition algorithm for APS star tracker: oriented triangles

An efficient star pattern recognition algorithm is presented. The purpose of this algorithm is to make sure of the compatibility of the software and the imaging sensor noise level. The new CMOS APS sensors have not currently reached the same accuracy as the former CCD sensors in position as well as in magnitude determination, especially in the dynamic stages. This algorithm allows the system to recognize the star pattern 20% faster than with reference algorithms. No false recognition has been noticed. Used databases have a size 5 to 10 times smaller, depending on other reference algorithms. Oriented triangles are used to compare the measured star pattern with the catalogue stars. The triangle's characterization criteria propose several solutions in a first time. A unique solution is selected by means of identification and validation methods in a second time. First results, presented hereinafter, are very encouraging, and this algorithm may be used in the future APS star trackers. APS star tracker robustness is significantly enhanced by this method during the critical navigation phases     

基于注意力机制和特征匹配的空对地多目标检测与跟踪算法

多目标跟踪算法是实现无人机自主导航的关键技术，为解决现有方法存在的小目标检测能力弱、计算能耗大、鲁棒性差等问题，提出一种基于注意力机制和特征匹配的多目标空对地跟踪算法，以实现航拍视角下对目标的精准高效跟踪。首先，引入通道可分离卷积，实现目标检测模型的轻量化；其次，构造融合空间注意力机制的小目标检测分支，提高对小微目标的检测精度，最后，优化目标跟踪算法的外观重识别网络，提高多目标跟踪效率。使用Visdrone2019-MOT数据集对所提算法进行验证，实验结果表明，所提算法的MOTA值提高了0.６%，FPS值为21.31帧/s，在模型大小和跟踪精度上实现了较好的平衡。     

Multi-Target/Multi-Sensor Tracking using Only Range and Doppler Measurements

A new approach is described for combining range and Doppler data from multiple radar platforms to perform multi-target detection and tracking. In particular, azimuthal measurements are assumed to be either coarse or unavailable, so that multiple sensors are required to triangulate target tracks using range and Doppler measurements only. Increasing the number of sensors can cause data association by conventional means to become impractical due to combinatorial complexity, i.e., an exponential increase in the number of mappings between signatures and target models. When the azimuthal resolution is coarse, this problem will be exacerbated by the resulting overlap between signatures from multiple targets and clutter. In the new approach, the data association is performed probabilistically, using a variation of expectation-maximization (EM). Combinatorial complexity is avoided by performing an efficient optimization in the space of all target tracks and mappings between tracks and data. The full, multi-sensor, version of the algorithm is tested on simulated data. The results demonstrate that accurate tracks can be estimated by exploiting spatial diversity in the sensor locations. Also, as a proof-of-concept, a simplified, single-sensor range-only version of the algorithm is tested on experimental radar data acquired with a stretch radar receiver. These results are promising, and demonstrate robustness in the presence of nonhomogeneous clutter.     

基于联邦滤波的SINS/GNSS/OD/高度计多源组合导航算法研究

针对城市情况下车载导航时单一导航源易受干扰的问题,提出了一种基于自适应联邦Kalman滤波的多源组合导航算法.该模型具有两级结构,由子滤波器进行各信息源局部估计后,通过主滤波器进行最优融合估计.融合具有不同工作特点的导航传感器的输出信息组成多源信息组合导航系统,从而提高了导航系统的精度和鲁棒性,且通过故障诊断算法实时检...     

Real-time decision aiding: aircraft guidance for wind shearavoidance

Modern estimation theory and artificial intelligence technology are applied to the Wind Shear Safety Advisor, a conceptual airborne advisory system to help flight crews avoid or survive encounter with hazardous low-altitude wind shear. Numerical and symbolic processes of the system fuse diverse, time-varying data from ground-based and airborne measurements. Simulated wind-shear-encounter scenarios illustrate the need to consider a variety of factors for optimal decision reliability. The wind-shear-encounter simulations show the potential of the Wind Shear Safety Advisor for effectively integrating the available information, highlighting the benefits of the computational techniques employed     

基于时空显著性建模的空中飞行器跟踪方法

以复杂背景下空中飞行器的鲁棒视觉跟踪问题为研究背景，为解决现有跟踪方法目标表征模型不够精确，算法鲁棒性严重受到目标形变、宽高比变化、复杂背景等因素干扰的问题，提出了建模跟踪场景中独立物体的显著性特性，用于构建精确的目标模型。提出的显著性估计方法有别于传统的单帧检测方法，利用跟踪算法提供的背景先验知识以及多帧图像观测数据，使用时空联合的方式进行建模估计，其结果用来指导目标跟踪算法选取有效视觉特征，建立精确目标表征模型，减小背景区域对算法模型的干扰。实验表明，提出的方法为上述难点问题提供了有效的解决方案，对空中飞行器的跟踪精度与鲁棒性优于大多数最先进的主流方法，在其他类型的目标跟踪任务中也有十分优越的性能表现。     

Space-time registration of radar and ESM using unscented Kalman filter

Space and time alignments are the prerequisites for the successful fusion of multiple sensors. A space-time registration model is proposed to estimate the system biases and to perform time synchronization together for mobile radar and electronic support measure (ESM) systems. A space-time registration model for radar and ESM is first developed, and an unscented Kalman filter (UKF) is proposed to estimate the space-time biases and target states simultaneously. The posterior Cramer-Rao bounds (PCRBs) are derived for the proposed UKF registration algorithm for ESM detection probability less than or equal to one. Theoretical analyses are performed to evaluate the accuracy and robustness of the proposed method. Computer simulations show that the UKF registration algorithm is indeed effective and robust for different radar and ESM tracking scenarios.     

基于高斯混合模型的航迹抗差关联算法

针对雷达系统误差时变、上报目标不完全一致等复杂场景下目标航迹关联问题,采用高斯混合模型（GMM）与航迹间拓扑信息相结合的方法实现航迹抗差关联。将航迹关联问题转化为图像匹配中的非刚性点集匹配问题,建立对非同源航迹具有鲁棒性的高斯混合模型,根据航迹间的邻域拓扑信息决定高斯混合模型中各高斯组成部分的权重,利用期望最大值（EM）算法求解高斯混合模型的最优闭合解,在期望步（E-step）阶段求解航迹的对应关系,在最大化步（M-step）阶段求解非同源航迹比例,最后进行航迹关联判决以获得关联结果。仿真结果表明,该算法在不同系统误差、目标分布密度、探测概率等环境下具有较好有效性和鲁棒性。     

绝对同相支路输出的GNSS欺骗检测

针对功率随时间变化,载波同步欺骗场景下,传统检测算法的欺骗检测性能不理想的问题,提出了一种基于绝对同相支路输出求和(SAIBO)的欺骗检测算法,为改善欺骗检测性能,进一步提出了SAIBO滑动平均(SAIBO-MA)算法。SAIBO-MA算法的构建过程使用接收机跟踪环的同相支路的输出结果取绝对值后求和形成SAIBO检测量,再做滑动平均处理后得到SAIBO-MA检测量。实验使用德克萨斯大学奥斯汀分校的德州欺骗测试电池(TEXBAT)的场景7(DS7)为数据集,比较并分析所提算法与传统算法的检测概率、欺骗判决数目和稳健性等欺骗检测性能。实验结果表明,SAIBO-MA具有更高的检测概率和检测精度、更好的即时性和稳健性以及更宽的检测范围。提出的SAIBO-MA算法克服了传统算法的缺点,具有更优的欺骗检测性能。     

Robust LPV modeling and control of aircraft flying through wind disturbance

This article deals with the disturbance attenuation control of aircraft flying through wind shear via Linear Parameter Varying(LPV) modeling and control method. A Flight Dynamics Model(FDM) with wind shear effects considered was established in wind coordinate system. An LPV FDM was built up based on function substitution whose decomposing function was optimized by Genetic Algorithm(GA). The wind disturbance was explicitly included in the system matrix of LPV FDM. Taking wind disturbance as external uncertainties, robust LPV control method with the LPV FDM was put forward. Based on ride quality and flight safety requirements in wind disturbance, longitudinal and lateral output feedback robust LPV controllers were designed respectively,in which the scheduling flight states in LPV model were actually dependent parameters in LPV control. The results indicate that LPV FDM can reflect the instantaneous dynamics of nonlinear system especially at the boundary of aerodynamic envelope. Furthermore, the LPV FDM also can approach nonlinear FDM's response in wind disturbance special flight. Compared with a parameter-invariant LQR controller designed with a small-disturbance FDM, the LPV controllers show preferable robustness and stability for disturbance attenuation.     

刀具磨损估计的多传感器融合神经网络方法研究

研究了利用声发射、振动和电机功率信号经BP算法信息融合估计刀具磨损量的方法,采用简单有效的灰色模型关联分析法选择特征参数,研究了网络参数对性能的影响以及网络性能的稳定性。     

Detection and diagnosis of sensor and actuator failures using IMMestimator

An approach to detection and diagnosis of multiple failures in a dynamic system is proposed. It is based on the interacting multiple-model (IMM) estimation algorithm, which is one of the most cost-effective adaptive estimation techniques for systems involving structural as well as parametric changes. The proposed approach provides an integrated framework for fault detection, diagnosis, and state estimation. It is able to detect and isolate multiple faults substantially more quickly and more reliably than many existing approaches. Its superiority is illustrated in two aircraft examples for single and double faults of both sensors and actuators, in the forms of “total”, “partial”, and simultaneous failures. Both deterministic and random fault scenarios are designed and used for testing and comparing the performance fairly. Some new performance indices are presented. The robustness of the proposed approach to the design of model transition probabilities, fault modeling errors, and the uncertainties of noise statistics are also evaluated     

Low altitude wind shear detection using airport surveillance radars

This paper describes an enhanced weather processor for the Federal Aviation Administration's Airport Surveillance Radar (ASR-9) that will include Doppler wind estimation for the detection of low altitude wind shear, scan-to-scan tracking to provide estimates of the speed and direction of storm movement and suppression' of spurious weather reports currently generated by the ASR-9's six-level weather channel during episodes of anomalous radar energy propagation (AP). This ASR-9 Wind Shear Processor (WSP) will be implemented as a retrofit to the ASR-9 through the addition of interfaces, receiving chain hardware and high-speed digital processing and display equipment. Thunderstorm activity in terminal airspace (the volume extending approximately 30 nmi from an airport and to 15,000 feet altitude) is an obvious safety issue and makes a significant overall contribution to delay in the United States commercial aviation industry. Analysis and on-line testing of the prototype ASR-9 WSP has confirmed that the system can provide operationally beneficial detection of low-altitude wind shear phenomena and enhanced weather situational awareness for Air Traffic Control teams     

飞行传感器的故障检测与识别

 飞行传感器是飞行控制和导航系统中的薄弱环节,它们的故障率一般是比较高的。为了提高系统的可靠性,对传感器的故障应能实时地检测和识别,并重构传感器所测量的信号(修正)。为此,在系统中常采用传感器的硬件余度和解析余度。本文介绍了飞行传感器硬件余度和解析余度的原理以及几种实用的余度方案,对解析余度中的统计决策原理和故障检测的鲁棒性问题也作了简单介绍。     

An intelligent algorithm for coherent sound source localization based on a strong tracking filter

Background noise is inevitable when sensor arrays are used for aeroacoustic measurements in wind tunnels. The direct removal of background noise, however, would affect the measurement accuracy. In particular, the existing array signal processing algorithms are either invalid or inefficient for removing the noise that is coherent with the signal of interest. In this paper, an intelligent algorithm is developed to localize the coherent sound sources and background noise in real time by iteratively checking the collected data from the array. The proposed method can automatically adjust the suboptimal fading factor to extract useful information as much as possible in residual sequence. This algorithm is tested in simulations and then demonstrated in an experiment.Compared to the two existing methods, the results indicate that the new method has a good phase-shift tracking ability and rapid estimation-error convergence speed, and can achieve an acceptable performance even for low-cost acoustic sensors. Overall, the proposed method should assist array beamforming and hence benefit aeroacoustic measurement.     

声学风洞内气动噪声源识别定位方法研究

声学风洞流场和试验环境会影响声音的传播,进而会影响声源识别。根据用于静态声源识别的经典Beamforming算法,利用声波在气流场和风洞射流剪切层中的传播规律,给出了一种能够用于声学风洞试验的基于麦克风阵列的气动噪声源识别分析方法,并进行了数值仿真和数值验算。数值验算结果表明风洞流场和剪切层对噪声源识别效果影响明显,采用本文所总结的计算方法能有效地修正这些影响。     

An all-sky autonomous star map identification algorithm

The attitude of the spacecraft can be obtained with accuracy by using star sensors. Its key technology is how to identify stellar maps. Triangle algorithm is used most widely in the current star map identification algorithms. In the field of physical geography modelling, Delaunay triangulation cutting algorithm has been widely used because of its important characteristic; the result of this triangulation cutting method is unique from a random set of points. This triangulation algorithm is first applied to identify star map for its particular character. In final, the proposed method is applied to simulation; the results show that compared with the current star map identification algorithms, the algorithm presented in this paper has the advantage of real-time properties and robustness. It needs a smaller database of guidance stars and matches more rapidly.     

恶劣天气下的仿生偏振定向方法

针对偏振光导航在恶劣天气下精度显著下降的问题,提出了一种可以在恶劣天气下基于大气偏振模式的定向算法。与现有方法相比,首次将三维块匹配与canny边缘检测结合的思想应用于修复被不同天气破坏的偏振角度图像中。具体而言,将偏振角度图像的修复分为噪声粗处理和边缘提取处理去噪两部分。在噪声粗处理阶段采用三维块匹配算法,在边缘提取处理去噪部分,利用canny边缘检测算法对偏振角度图像进行二次去噪。实验结果表明,该方法不仅能够提高晴朗天空下的定向精度,而且能够显著提升在阴天、沙尘、雾霾等恶劣天气条件下的导航定向精度,即使在偏振角图像对称∞模式被破坏的情况下,航向角精度仍可由9.4470°提高到1.6859°。