A Fault Sample Simulation Approach for Virtual Testability Demonstration Test

Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach for virtual testability demonstration test based on stochastic process theory is proposed.First,the similarities and differences of fault sample generation between physical testability demonstration test and virtual testability demonstration test are discussed.Second,it is pointed out that the fault occurrence process subject to perfect repair is renewal process.Third,the interarrival time distribution function of the next fault event is given.Steps and flowcharts of fault sample generation are introduced.The number of faults and their occurrence time are obtained by statistical simulation.Finally,experiments are carried out on a stable tracking platform.Because a variety of types of life distributions and maintenance modes are considered and some assumptions are removed,the sample size and structure of fault sample simulation results are more similar to the actual results and more reasonable.The proposed method can effectively guide the fault injection in virtual testability demonstration test.     

HISTORICAL PROCEDURES AND G-DSG METHOD BASED MANUFACTURING PLANNING

Oriented to CAD/CAM seamless integration, this paper presents an idea for synthetically considering the qualitative history model, which represents the whole course of modeling, and the quantitative geometry model, which contains the extended Brep model, CSG and feature pedigree. History model building captures in background the dynamic interactive definition of engineering requirement and then explicitly conveys the original intention to successive application layers, which isc onductive to the decision support of manufacturing planning in not only automatic geometry re-constructing but also machining set-up. G-DSG theory as an earlier achievement is applied to generate the topology-independent generalized mid-model as an input to manufacturing planning, which istherefore simplified and its accuracy is simultaneously improved. Manufacturing planning lays emphasis on optimizing the mapping in both geometry and function from part itself to detail machining scheme. Comparatively, process planning pays more attention to the mapping to those items like tool, fixture, etc. Theoretically, such an idea is also beneficial to realizing the parametric NC machining trajectory generation and maintaining its dynamic consistency with the update of the design model.     

Effect of nickel introduced by electroplating on pyrocarbon deposition of carbon-fiber preforms

In order to improve the deposition rate and microstructure of pyrocarbon, nickel was introduced by electroplating on carbon fibers and used as a catalyst during the deposition of pyrocarbon at 1000 C using methane as a precursor gas. The distribution of nickel catalyst and the microstructure of pyrocarbon were characterized by scanning electron microscopy（SEM）, energy dispersive spectroscopy（EDS）, X-ray diffraction（XRD）, and Raman micro-spectrometry. Results show that nano-sized nickel particles could be well distributed on carbon fibers and the pyrocarbon deposited catalytically had a smaller d002 value and a higher graphitization degree compared with that without catalyst. In addition, the deposition rate of pyrocarbon in each hour was measured.The deposition rate of pyrocarbon in the first hour was more than 10 times when carbon cloth substrates were doped with nickel catalysts as compared to the pure carbon cloths. The pyrocarbon gained by rapid deposition may include two parts, which are generation directly on the nickel catalyst and formation with the carbon nanofibers as crystal nucleus.     

Investigation of MHD power generation with supersonic non-equilibrium RF discharge

Magnetohydrodynamic (MHD) power generation with supersonic non-equilibrium plasma is demonstrated. Capacitively coupled radio frequency (RF) discharge (6 MHz, maximum continual power output of 200 W) was adopted to ionize the Mach number 3.5 (650 m/s), 0.023 kg/m3 airflow. In a MHD channel of 16 mm × 10 mm × 20 mm, MHD open voltage of 10 V is realized in the magnetic field of 1.25 T, and power of 0.12 mW is extracted steadily and con-tinuously in the magnetic field of 1 T. The reasons for limited power generation are proposed as:low conductivity of RF discharge; large touch resistance between MHD electrode and plasma;strong current eddies due to flow boundary layer. In addition, the cathode voltage fall is too low to have obvious effects on MHD power generation.     

Type synthesis of 2-DoF rotational parallel mechanisms actuating the inter-satellite link antenna

This paper focuses on the type synthesis of two degree-of-freedom (2-DoF) rotational parallel mechanisms (RPMs) that would be applied as mechanisms actuating the inter-satellite link antenna. Based upon Lie group theory, two steps are necessary to synthesize 2-DoF RPMs except describing the continuous desired motions of the moving platform. They are respectively generation of required open-loop limbs between the fixed base and the moving platform and definition of assembly principles for these limbs. Firstly, all available displacement subgroups or submanifolds are obtained readily according to that the continuous motion of the moving platform is the inter-section of those of all open-loop limbs. These subgroups or submanifolds are used to generate all the topology structures of limbs. By describing the characteristics of the displacement subgroups and submanifolds intuitively through employing simple geometrical symbols, their intersection and union operations can be carried out easily. Based on this, the assembly principles of two types are defined to synthesize all 2-DoF RPMs using obtained limbs. Finally, two novel categories of 2-DoF RPMs are provided by introducing a circular track and an articulated rotating platform, respectively. This work can lay the foundations for analysis and optimal design of 2-DoF RPMs that actuate the inter-satellite link antenna.     

Experimental study on ceramic membrane technology for onboard oxygen generation

The ceramic membrane oxygen generation technology has advantages of high concentra-tion of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT). Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.     

Nonlinear dynamics of a flapping rotary wing: Modeling and optimal wing kinematic analysis

The analysis of the passive rotation feature of a micro Flapping Rotary Wing(FRW)applicable for Micro Air Vehicle(MAV) design is presented in this paper. The dynamics of the wing and its influence on aerodynamic performance of FRW is studied at low Reynolds number(~10~3).The FRW is modeled as a simplified system of three rigid bodies: a rotary base with two flapping wings. The multibody dynamic theory is employed to derive the motion equations for FRW. A quasi-steady aerodynamic model is utilized for the calculation of the aerodynamic forces and moments. The dynamic motion process and the effects of the kinematics of wings on the dynamic rotational equilibrium of FWR and the aerodynamic performances are studied. The results show that the passive rotation motion of the wings is a continuous dynamic process which converges into an equilibrium rotary velocity due to the interaction between aerodynamic thrust, drag force and wing inertia. This causes a unique dynamic time-lag phenomena of lift generation for FRW, unlike the normal flapping wing flight vehicle driven by its own motor to actively rotate its wings. The analysis also shows that in order to acquire a high positive lift generation with high power efficiency and small dynamic time-lag, a relative high mid-up stroke angle within 7–15° and low mid-down stroke angle within -40° to -35° are necessary. The results provide a quantified guidance for design option of FRW together with the optimal kinematics of motion according to flight performance requirement.     

Aerodynamic shape optimization for alleviating dynamic stall characteristics of helicopter rotor airfoil

In order to alleviate the dynamic stall effects in helicopter rotor, the sequential quadratic programming(SQP) method is employed to optimize the characteristics of airfoil under dynamic stall conditions based on the SC1095 airfoil. The geometry of airfoil is parameterized by the class-shape-transformation(CST) method, and the C-topology body-fitted mesh is then automatically generated around the airfoil by solving the Poisson equations. Based on the grid generation technology, the unsteady Reynolds-averaged Navier-Stokes(RANS) equations are chosen as the governing equations for predicting airfoil flow field and the highly-efficient implicit scheme of lower–upper symmetric Gauss–Seidel(LU-SGS) is adopted for temporal discretization. To capture the dynamic stall phenomenon of the rotor more accurately, the Spalart–Allmaras turbulence model is employed to close the RANS equations. The optimized airfoil with a larger leading edge radius and camber is obtained. The leading edge vortex and trailing edge separation of the optimized airfoil under unsteady conditions are obviously weakened, and the dynamic stall characteristics of optimized airfoil at different Mach numbers, reduced frequencies and angles of attack are also obviously improved compared with the baseline SC1095 airfoil. It is demonstrated that the optimized method is effective and the optimized airfoil is suitable as the helicopter rotor airfoil.     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

Experimental Investigation of the Effects of Various Plasma Actuator Configurations on Lift and Drag Coefficients of a Circular Cylinder Including the Effects of Electrodes

In this paper, the effects of the existence of plasma actuator electrodes and also various configurations of the actuator for controlling the flow field around a circular cylinder are experimentally investigated. The cylinder is made of PVC (Polyvinyl Chloride) and considered as a dielectric barrier. Two electrodes are flush-mounted on the surface of the cylinder and are connected to a DC high voltage power supply for generation of electrical discharge. Pressure distribution results show that the existence of the electrodes and also the plasma are able to change the pressure distribution around the cylinder and consequently the lift and drag coefficients. It is found that the effect of the existence of the electrodes is comparable with the effect of plasma actuator in controlling the flow field around the cylinder and this effect is not reported by other researchers. Eventually it is concluded that the existence of the electrodes or any extra objects on the cylinder and also the existence of the plasma are capable of changing the flow field structure around the cylinder so that the behavior of the lift and drag coefficients of the cylinder will be changed significantly.     

内套筒对预紧力齿连接接头预紧力的影响

为了研究内套筒材料性能与几何尺寸等参数对预紧力影响规律，本文首先通过实验对不同内套筒材料与壁厚对预紧力的影响规律进行研究。然后通过有限元软件ANSYS建立了接头预紧力施加的数值模型，模拟结果与实验实测值吻合较好，并通过有限元对实验现象进行了分析。结果表明：相同挤压量下，接头壁厚越高，所产生预紧力越高；对于塑性材料的内套筒接头，当外部挤压量超过一定值时，塑性材料完全进入塑性，变形增加，但应力值不再显著增长，预紧力趋于稳定；而对于弹性材料的内套筒接头，弹性材料应力一直随着应变线性增长，因此预紧力随着挤压量增加不断增加。     

The Threshold of Civil Aviation and The Discount of Tickets

In the planned economy era, taking plane was a kind of treatment in China.There were few people who can travel by plane and even less people paid attentionto the price of tickets. Single price management system in Chinese civil aviation isthe product of that era: After the 1990s, market economic system was employed inChina. The problem of price appeared following the development and reform ofChina civil aviation, and has been the concern of more and more people and themedia. Let alone "doubl…     

航空电子系统综合技术的发展与模块化趋势

在系统阐述了航空电子综合技术及系统结构发展的基础上,全面论述了综合化及模块化的含义,指出了综合化系统及模块化在大系统结构中的层次关系。最后,提出了我国发展综合化系统应采取的策略。     

The Formation Of The First Stars In The Universe

In this review, I survey our current understanding of how the very first stars in the universe formed, with a focus on three main areas of interest: the formation of the first protogalaxies and the cooling of gas within them, the nature and extent of fragmentation within the cool gas, and the physics – in particular the interplay between protostellar accretion and protostellar feedback – that serves to determine the final stellar mass. In each of these areas, I have attempted to show how our thinking has developed over recent years, aided in large part by the increasing ease with which we can now perform detailed numerical simulations of primordial star formation. I have also tried to indicate the areas where our understanding remains incomplete, and to identify some of the most important unsolved problems.     

录音机外语学习附加器的设计

本文介绍了录音机外语学习附加器的设计思想、工作原理以及独特的语音存储和各种重放功能。     

高分辨率电流频率转换电路设计

随着惯性技术的发展,对电流频率转换电路的分辨率要求越来越高,以往常用的I/F转换电路已经不能满足要求,本文在传统电路的基础上结合FPGA和DSP提出了一种电路设计思路来提高分辨率.设计了硬件电路和软件电路.根据大量的试验数据分析,此改进电路在不损失电流频率转换电路线性度和稳定性的精度下,把电路的分辨率提高了一个数量级,解决了高精度电流频率转换电路分辨率低的问题,进一步扩大了电流频率转换电路的使用范围.     

武装直升机抗坠毁技术研究

随着直升机的迅猛发展,直升机乘员应急救生问题日益得到重视,国内外研究了一些比较成熟的救生方案。该文简要地介绍了武装直升机的救生技术,重点论述了抗坠毁能力和抗坠毁设计中应该采用的措施,以有利于武装直升机的救生,提高武装直升机的生存能力。     

美国西南航适航指令事件始末

在2007年3月,美国西南航空公司(SWA)发现自己所运营的飞机不符合适航指令(AD)后将这一问题通过自愿报告系统(VDRP)向其审定管理叻公室(CMO)进行汇报,并采取补救措施.与此同时,SWA有46架与AD不符的波音737飞机又继续运营了9天.SWA的主管称其误以为CMO准许其继续运营.