航天器智能诊断系统开发研究

提出了基于故障树的故障报警方法和诊断方法,提出了面向故障树的报警知识和诊断知识表示方法及相应的报警和诊断推理策略,最后,在Windows环境下,用BorlandC++实现了一个原型系统,并通过对“实践-四号”卫星能源系统故障模拟实验台的诊断验证了系统的有效性。     

A novel two-stage extended Kalman filter algorithm for reaction flywheels fault estimation

This paper investigates the problem of two-stage extended Kalman filter(TSEKF)-based fault estimation for reaction flywheels in satellite attitude control systems(ACSs). Firstly, based on the separate-bias principle, a satellite ACSs with actuator fault is transformed into an augmented nonlinear discrete stochastic model; then, a novel TSEKF is suggested such that it can simultaneously estimate satellite attitude information and actuator faults no matter they are additive or multiplicative; finally, the proposed approach is respectively applied to estimating bias faults and loss of effectiveness for reaction flywheels in satellite ACSs, and simulation results demonstrate the effectiveness of the proposed fault estimation approach.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

基于自适应滑模观测器的航空发动机故障诊断

为解决现有航空发动机基于模型的在线故障诊断方法存在对模型精度要求高等的问题,利用滑模方法设计一种自适应滑模观测器对航空发动机进行在线故障重构、诊断与隔离。对传感器故障和执行机构故障分别设计了重构算法,针对两者重构故障的特点提出了判断逻辑,讨论了设计参数对于观测效果与抖振的影响。 Matlab/Simulink仿真结果显示,重构的故障与实际故障基本吻合,对故障的诊断、隔离、定位具有良好效果,并对环境不确定性具有优良的鲁棒性。     

人工神经网络融合诊断航空发动机气路故障

为了提高诊断的准确性,提出了一种利用人工神经网络融合诊断航空发动机气路故障的新算法.由4个子系统有机结合起来建立了神经网络融合诊断系统,对从飞参数据中得到的气路故障数据进行预处理之后,分别输入广义回归神经网络子系统和BP神经网络子系统进行诊断,然后研究了一种新的信息融合算法对两者的诊断结果进行融合,使诊断结果的故障特征更加明显,提高了诊断的准确性.通过测试表明,该信息融合算法十分有效,具有较高的实用价值.      

基于面向对象的故障诊断专家系统模型研究

讨论了一种基于面向对象技术和专家系统理论的飞机起落架故障诊断模型 ,并且给出了整个系统模型的具体结构框架。着重讨论了总控系统的结构、控制方法、工作流程和子系统的知识面向对象的表示和推理。并且 ,以波音 737飞机起落架刹车系统的故障为例 ,具体分析了它的故障树结构 ,并用c 语言实现了该故障树面向对象的表示     

有效性因子在卫星姿控系统集成故障诊断与容错控制中的应用

 研究了在轨卫星姿态控制系统(ACS)发生可修复性故障状况下的集成故障诊断与容错控制。考虑执行机构和敏感器分别或同时出现故障,相应地分别或同时在姿态动力学和运动学方程引入控制有效性因子和测量有效性因子,利用二级卡尔曼滤波算法求解其值,以说明系统的控制以及测量的有效程度。采用统计假设检验通过其幅值变化判断系统是否存在故障,当故障发生时,引入重构容错控制器对原控制器进行补偿控制。建立卫星闭环姿态控制系统对算法进行了仿真验证,仿真结果表明该算法快速可靠,能够满足在轨卫星姿态控制系统故障状况下的性能要求。     

涡扇发动机气路故障定量诊断的BP网络研究

为了克服ＢＰ算法收敛速度慢的问题,提出了一种基于混合学习规则的ＢＰ算法,并采用模归一化方法,成功地定量组织了故障的学习样本,建立了能够定量分析发动机气路部件故障的人工神经网络（ＢＰＮ）。通过分析测量系统随机误差的影响和实际试车数据的效验结果,表明该网络具有较强的推广能力及适应性,能基本满足故障定量诊断的要求,并具有较好的工程实用性。     

卫星故障诊断的最优奇偶向量法

 提供一种卫星故障诊断方法以提高 GPS导航的完整性。该方法利用最优奇偶向量来检测和诊断卫星故障以提高卫星故障诊断的准确性。仿真结果显示,在故障幅值较小的情况下最优奇偶向量方法相比广义似然比方法可以提高故障的正确检测率和正确诊断率。该方法还可以缩短检测斜坡型故障的时间,从而提高了系统的可靠性。     

Satellite fault diagnosis using a bank of interacting Kalman filters

The main objective of this work is development and testing of a detection, isolation, and diagnosis algorithm based on interacting multiple model (IMM) filters for both partial (soft) and total (hard) reaction wheels faults in a spacecraft. This is shown to be accomplished under a number of different faulty mode scenarios for these actuators associated with the attitude control system (ACS) of a satellite. Various operating and faulty conditions due to changes and anomalies in the temperature, the power supply line voltage, and the loss of effectiveness of the torque and the current are considered in each reaction wheel associated with the three axes of the satellite. Once a fault mode is detected and isolated the recovery procedure can subsequently be engaged by invoking appropriate switching control strategies for the ACS. The application of a bank of interacting multiple Kalman filters for detection and diagnosis of anticipated reaction wheel failures in the ACS is described and developed. Compared with other model-based fault detection, diagnosis and isolation(FDDI) strategies developed in the control systems literature, our FDDI strategy is shown, through extensive numerical simulations, to be more accurate and robust with potential for extension to a number of other application areas.     

Spacecraft design considerations for small satellite remote sensing

The idea of adapting existing small satellite technology for remote sensing purposes is discussed. The major design problems and constraints influencing the design of a small low-cost remote sensing satellite bus are identified using the subsystem approach. Key design areas include the improvement of battery technology and the development of a deployable solar array, attitude control assemblies, on-board data processing/storage, and ground station data acquisition. Although the eventual satellite would also have to be somewhat larger, more powerful and, above all, more sophisticated than the previous small satellites, this is considered to be a natural progression of research in this area     

DF Vectoring: Application to Stationary Synchronous Satellites

Several methods of using an earth-based radio reference signal to determine the three-axis attitude of a synchronous satellite, and two types of spacecraft electronic systems (amplitude measurement and phase measurement), which obtain attitude and pointing information from the radio reference signal for orientating the spacecraft and for directing large-aperture antennas aboard the spacecraft are described. The earth-based radio reference signal also enables the electronic systems to determine angles to other ground stations with respect to fixed (reference) stations on the earth. These attitude- and angle-determining techniques are applicable to communications satellites, navigational satellites, and intersatellite data relay systems.     

基于ATSUKF算法的卫星姿控系统故障估计

针对卫星姿态控制过程中可能发生的执行机构或敏感器故障,提出了一种基于无损卡尔曼滤波（UKF）及偏差分离原理的自适应二阶无损卡尔曼滤波（ATSUKF）算法。首先,提出TSUKF算法,通过UKF处理姿态机动时的非线性并通过偏差分离原理将非线性系统的状态及故障分别估计,避免非线性模型的线性化过程同时降低了计算过程中的矩阵维度。然后,在TSUKF算法的基础上提出了ATSUKF算法,通过滑动窗口内的残差计算自适应矩阵,使滤波器在统计特性不准确的情况下仍然具有较快的收敛速度,特别适用于卫星快速机动过程中的姿态与故障估计。数值仿真结果表明,ATSUKF算法相较于TSUKF算法能有效降低统计特性不准对系统造成的不利影响,实现卫星姿态、执行机构/敏感器故障的快速估计。     

基于SVM和SNN的航空发动机气路故障诊断

为了区分航空发动机气路故障诊断过程中出现的相似故障,提高诊断准确率,提出了一种支持向量机(SVM)和协同神经网络(SNN)相结合的故障诊断方法.首先利用参数优化后的SVM对测量数据进行初步故障诊断分类,对诊断结果进行分析统计,得出难以区分的相似故障类型,并根据SNN对这些相似故障进一步地区分判断,最后根据实际数据对此故障模型进行仿真.结果显示:基于SVM的初步故障诊断准确率达到96%;而经过SNN进一步地相似故障区分后,诊断准确率提升到100%.     

基于SPSO-SVR的融合航空发动机传感器故障诊断

针对航空发动机常见的传感器故障问题, 提出了一种利用改进的粒子群算法训练支持向量回归机, 并利用融合机制将其应用于传感器故障诊断.论述了用一簇支持向量回归机(SVR)预测器对传感器进行实时检测, 通过逻辑判断机制隔离故障传感器, 并且依据剩余的无故障传感器信息实现信号重构.以某型航空发动机传感器在其整个工作范围内受到的冲击、偏置和漂移故障为例, 验证了基于自协调粒子群优化支持向量回归机(SPSO-SVR)算法的融合诊断机制对传感器单一故障和多重故障具有较高的精度和计算效率.      

航天器姿控系统的PD型学习观测器故障重构

针对满足Lipschitz条件的航天器姿态控制系统这一非线性系统中存在的执行器加性故障、空间干扰与测量噪声问题,提出了基于PD型迭代学习观测器的故障重构方法。该方法具有期望的鲁棒性能指标,能够在系统存在空间干扰与测量噪声情况下实现对突变故障与时变故障等故障类型的精确重构。基于线性矩阵不等式技术给出系统化PD型迭代学习观测器的设计方法,并根据Lyapunov稳定性理论对上述设计方法的稳定性条件进行了理论证明,同时利用鲁棒技术抑制空间干扰与测量噪声对执行器故障重构的影响,通过线性矩阵不等式工具箱求解观测器参数矩阵。最后,将该方法应用到航天器姿态控制系统中,仿真结果证明了该方法的有效性。     

DOA estimation for attitude determination on communication satellites

In order to determine an appropriate attitude of three-axis stabilized communication satellites, this paper describes a novel attitude determination method using direction of arrival （DOA） estimation of a ground signal source. It differs from optical measurement, magnetic field measurement, inertial measurement, and global positioning system （GPS） attitude determination. The proposed method is characterized by taking the ground signal source as the attitude reference and acquiring attitude information from DOA estimation. Firstly, an attitude measurement equation with DOA estimation is derived in detail. Then, the error of the measurement equation is analyzed. Finally, an attitude determination algorithm is presented using a dynamic model, the attitude measurement equation, and measurement errors. A developing low Earth orbit （LEO） satellite which tests mobile communication technology with smart antennas can be stabilized in three axes by corporately using a magnetometer, reaction wheels, and three-axis magnetorquer rods. Based on the communication satellite, simulation results demonstrate the effectiveness of the method. The method could be a backup of attitude determination to prevent a system failure on the satellite. Its precision depends on the number of snapshots and the input signal-to-noise ratio （SNR） with DOA estimation.     

机载捷联航姿系统精度超差故障分析

捷联航向姿态参考系统是一种重要的机载导航设备,可实现飞机航向、姿态、角速率,以及加速度多维信息的测量。针对某型捷联航姿系统在改装试飞过程中出现的精度超差故障,结合工作原理和捷联航姿系统软硬件设计方案,进行故障机理分析,建立故障树。利用故障树,对底事件进行逐一排查,筛查问题原因,成功定位并顺利排除该故障。通过故障树的定性分析表明,精度超差的原因是系统软件设计中将轮载信号作为地速反馈的先决条件所致。     

基于分层传递系统模型的航天器故障诊断方法

 针对传统的传递系统模型在航天器自主诊断系统中只能表示单一粒度诊断知识,知识表示的完备性差,导致诊断结果的分辨率不高,且诊断系统执行效率低的问题,提出了分层传递系统模型和诊断方法。为了保证不同粒度诊断知识的完备性表示,将系统模型按不同粒度和结构关系进行分层。通过自顶向下的递归搜索,先监测系统异常,再匹配故障类型,逐层缩小搜索空间,最终找出故障候选集和故障的层次关系。同时为了减小计算规模,在诊断过程中引入了分离策略,降低实时诊断计算量。应用该方法建立了某卫星测控分系统模型并进行故障仿真,结果表明该方法可以增加模型知识表示的完备性,并能有效提高诊断效率和结果的分辨率。     

通信卫星模拟器通用基础平台设计研究

卫星模拟器主要是对地面测控系统遥测接收和遥控指令发送的工作状态进行检查和验证,验证地面测控系统设备正确性,提高地面测控系统对卫星故障的应急处理能力等。本文从软件系统架构高度对不同卫星各分系统模型共有属性进行抽象提炼和设计研究,提高软件架构及模块的复用性、扩展性和维护性,通信卫星模拟器通用基础平台可同时验证不同卫星对地面测试系统的任务要求,使不同卫星模拟器的建设和地面系统测试支持可以纳入一个规范化、通用化的系统框架中。