Spectral Analysis and Subtraction of Noise in Radar Signals

A new method of maximum entropy spectral estimation called the revised maximum entropy method (MEM) is formulated and is applied to the spectral analysis of the echo signals from atmospheric turbulence observed by an incoherent scatter radar. The revised MEM is shown free from many demerits of the other methods for spectral analysis. Further it makes it possible to subtract the white noise usually contained in the data during the processing. Some examples of spectral estimation are shown for the actual radar signals and the simulated data. Another application of the revised MEM is the subtraction of the clutter component which is difficult to do by linear filtering. The method is successfully applied to several data abounding with the clutter to obtain the spectra of the echo signals with less clutter distortion.     

相关系数ARMA(p,q)序列分析方法

本文提出相关系数ARMA(p,q)序列分析方法。相关系数ARMA(p,q)序列是从非平稳序列中分离出的一类工程上常见且便于研究的时间序列,在模式识别、故障诊断、信号处理、自动控制和结构响应分析等领域有着广泛的应用。传统的相关函数ARMA(p,q)序列仅是它的一个特例。文中建立了相关系数ARMA(p,q)序列的条件极大似然估计和精确极大似然估计,前者在样本较大时简单便于工程应用,后者则在样本较小时仍具有较高的精度,它们通过时域的全程分析,充分利用样本信息确定相关系数ARMA(p,q)序列的均值函数、方差函数和相关系数函数。在此基础上可进行高精度的频谱分析。     

Range, radial velocity, and acceleration MLE using radar LFM pulsetrain

An efficient implementation of the maximum likelihood estimator (MLE) is presented for the estimation of target range, radial velocity, and acceleration when the radar waveform consists of a wideband linear frequency modulated (LFM) pulse train. Analytic properties of the associated wideband ambiguity function are derived; in particular the ambiguity function, with acceleration set to zero, is derived in closed form. Convexity and symmetry properties of the ambiguity function over range, velocity, and acceleration are presented; these are useful for determining region and speed of convergence for recursive algorithms used to compute the MLE. In addition, the Cramer-Rao bound (CRB) is computed in closed form which shows that the velocity bound is decoupled from the corresponding bounds in range and acceleration. A fast MLE is then proposed which uses the Hough transform (HT) to initialize the MLE algorithm. Monte Carlo simulations show that the MLE attains the CRB for low to moderate signal-to-noise depending on the a priori estimates of range, velocity, and acceleration     

Outlier resistant adaptive matched filtering

Robust adaptive matched filtering (AMF) whereby outlier data vectors are censored from the covariance matrix estimate is considered in a maximum likelihood estimation (MLE) setting. It is known that outlier data vectors whose steering vector is highly correlated with the desired steering vector, can significantly degrade the performance of AMF algorithms such as sample matrix inversion (SMI) or fast maximum likelihood (FML). Four new algorithms that censor outliers are presented which are derived via approximation to the MLE solution. Two algorithms each are related to using the SMI or the FML to estimate the unknown underlying covariance matrix. Results are presented using computer simulations which demonstrate the relative effectiveness of the four algorithms versus each other and also versus the SMI and FML algorithms in the presence of outliers and no outliers. It is shown that one of the censoring algorithms, called the reiterative censored fast maximum likelihood (CFML) technique is significantly superior to the other three censoring methods in stressful outlier scenarios.     

基于声波传播时间估计的气流速度测量方法

 为实现对亚声速和超声速气流速度的统一测量,提出了一种基于声传感器的新型测量方法。首先,根据声波在亚声速和超声速气流中的传播特性,利用特定的测量装置建立了声波传播时间与气流速度之间的数学模型,从而将气流速度的测量问题转化为声波传播时间的测量问题。然后,在此基础上,利用计时法和最大似然估计(MLE)方法来估计声波传播时间;其中,计时法在实时性上优势明显,而MLE方法则在可靠性上优于前者。最后,分别从阵元位置扰动性、计时误差和克拉美-罗界(CRB)3个方面对所提算法的性能进行了分析与仿真验证。结果表明,该算法能够实现对亚声速和超声速气流速度的精确测量。     

竞争失效场合步进应力加速试验统计分析

竞争失效场合加速试验(AT)技术是加速试验由简单结构产品向复杂结构产品推广应用的基础.但目前的方法主要针对恒定应力加速试验.而对竞争失效场合步进应力加速试验缺乏相关研究.针对这一问题,对最一般形式(突发型失效和退化型失效并存)的竞争失效场合步进应力试验进行建模与分析.充分考虑了试验数据由于试验截尾和失效样本对应的失效模...     

论加速可靠性增长试验 (Ⅶ )步进应力试验方案的统计分析

对幂律-线性化模型步进应力加速可靠性增长试验方案，给出了模型参数，加速系数及MTBF的极大似然估计，极大后验估计，Bayes估计及其计算方法，对这些方案给出了Monte Carlo模拟方法，并用数值例说明了这些方法。     

Monopulse-radar tracking of swerling III-IV targets using multiple observations

This paper proposes a novel statistical prediction of monopulse errors (Levanon, 1988) for a radar Swerling III-IV target embedded in noise or noise jamming where multiple observations are available. First, the study of the maximum likelihood estimator (MLE) of the complex monopulse ratio for a Swerling III-IV target embedded in spatially white noise allows us to extend the use of the MLE practical approximate form introduced by Mosca (1969) for Swerling 0-I-II cases. Afterward, we derive analytical formulas for both the mean and variance of the MLE in approximate form conditioned by the usual detection step performed on the sum channel of a monopulse antenna. Last, we provide a comparison of target direction of arrival (DOA) estimation performance based on monopulse ratio estimation as a function of the Swerling model in the context of a multifunction radar.     

Model-based multifrequency array signal processing for low-angletracking

Tracking low-altitude targets over the sea is problematic because of interference between the direct and reflected signal. Standard monopulse trackers can experience large errors because of multipath maximum likelihood estimation (MLE) has been used to more accurately estimate the target height in the presence of multipath MLE is a model-fitting technique where the model parameters are chosen to maximize the likelihood function. It is shown that the type of observation model has a large effect on performance. Tracking performance is compared using three different observation models employing varying amounts of a priori information. Results are presented for different array sizes: eight and 32-element arrays and two-element subarrays typical of phase monopulse. Performance is compared with that of standard techniques such as Fourier beamforming and phase monopulse     

Estimation of Time of Arrival for Rectangular Pulses

We consider the performance of the maximum likelihood estimator (MLE) for the time of arrival of a rectangular pulse in additive white Gaussian noise. Upper and lower bounds are derived for the mean square error. These bounds are tight for both medium and large energy-to-noise ratios.     

Estimation near "Zero Information" points: angle-of-arrival near the endfire

We examine large-sample properties of the maximum- likelihood estimator (MLE) in the vicinity of points where the Fisher information measure (FIM) equals zero. Under mild regularity conditions the MLE is asymptotically efficient and therefore lower bounded by the Cramer-Rao lower bound (CRLB) [5], which diverges for such points. When a linear sensor array is used for angle-of-arrival (AOA) estimation, the CRLB diverges as the AOA approaches pi/2. We provide new results characterizing the MLE performance in the AOA problem.     

On radar detection and direction finding using sparse arrays

The potential performance of radar systems employing sparse arrays is investigated. Different sparse array geometries are evaluated with respect to detection and estimation performance. We present appropriate tools for analytical computation of the detection and estimation performance of the likelihood ratio test (LRT) and the maximum likelihood estimator (MLE), respectively. Particular attention is paid to the effect of ambiguity errors on system performance. The results show that sparse arrays have several advantages over nonsparse arrays, but that ambiguities deteriorate performance when sidelobe interference is present. Some ways to mitigate the ambiguity effects on system performance are briefly discussed.     

某型涡喷发动机的可靠性增长分析

针对某型涡喷发动机的一组含零故障的多台不同步截尾故障数据。给出了趋势检验、AMSAA模型的拟合优度检验及模型参数的极大似然估计方法。分析表明，该型发动机有显著的可靠性增长，且可用AMSAA模型拟合其故障数据，在考虑零故障后，其参数及MTBF的极大似然估计（MLE）更为可信。     

基于自适应步长选择的周期格型线搜索估计

稀疏、含噪观测条件下周期点过程的周期估计是一个经典的信号处理问题。针对该问题,提出了一种格型线搜索(LLS)算法,该算法通过数值方式搜索似然函数的最大值,但其性能取决于人为预先选取的搜索步长。推导了一个步长计算公式,并利用该公式改进了LLS算法。改进的LLS算法能够自适应选择搜索步长,其达到的克拉美-罗界(CRLB)的信噪比(SNR)门限与最大似然估计(MLE)算法一致,但计算复杂度比后者低一个多的数量级。性能分析与仿真实验表明,所提算法比已有算法能更好地实现估计精度与复杂度的折中。     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

Numerical and experimental study of twin-fluid two-phase internal-mixing atomizer to develop maximum entropy method

This paper presents an analytical, numerical, and experimental study on atomization characteristics and droplet distribution of a twin-fluid two-phase internal mixing atomizer to develop a Maximum Entropy Method (MEM). A two-phase Eulerian-Lagrangian method is utilized for atomization modeling of the inside and outside atomizer. In order to modify energy and momentum sources in the MEM, parametric studies are performed, and experimental tests are carried out to verify the results by applying the shadowgraph method. An advanced test stand is developed to prepare a wide range of changes in atomization characteristics and mixing ratios. A high degree of consistency is found between numerical results from the developed MEM and experimental tests with different gas-phase pressures and liquid flow rates. The droplet diameter and velocity distribution are reviewed based on various Weber numbers, sources of energy, and momentum. Turbulence modeling assists to estimate the breakup length and time scale precisely in the developed MEM, and distribution ranges with mean values are achieved. With reference to a strong correlation between upstream turbulence flow and the developed MEM verified by experimental tests, an ideal droplet size and velocity distribution prediction is observed.     

Biparametric CFAR procedures for lognormal clutter

The authors consider procedures for constant false alarm rate in lognormal clutter, accounting for variations of both the scale and a shape parameter of the clutter. Adaptivity to both parameters is obtained through biparametric estimation based on a sliding window surrounding the radar cell under test. Some procedures exploiting best linear unbiased estimation (BLUE) are presented and compared to a previous procedure called Log-t, which uses maximum likelihood estimation (MLE). The comparison is carried on for both a homogeneous clutter environment and for instances of inhomogeneous environment (clutter edges and spurious targets). In the latter instances, some advantages of BLUE procedures which stem from the opportunity of censoring are highlighted     

Airborne/spacebased radar STAP using a structured covariance matrix

It is shown that partial information about the airborne/spacebased (A/S) clutter covariance matrix (CCM) can be used effectively to significantly enhance the convergence performance of a block-processed space/time adaptive processor (STAP) in a clutter and jamming environment. The partial knowledge of the CCM is based upon the simplified general clutter model (GCM) which has been developed by the airborne radar community. A priori knowledge of parameters which should be readily measurable (but not necessarily accurate) by the radar platform associated with this model is assumed. The GCM generates an assumed CCM. The assumed CCM along with exact knowledge of the thermal noise covariance matrix is used to form a maximum likelihood estimate (MLE) of the unknown interference covariance matrix which is used by the STAP. The new algorithm that employs the a priori clutter and thermal noise covariance information is evaluated using two clutter models: 1) a mismatched GCM, and 2) the high-fidelity Research Laboratory STAP clutter model. For both clutter models, the new algorithm performed significantly better (i.e., converged faster) than the sample matrix inversion (SMI) and fast maximum likelihood (FML) STAP algorithms, the latter of which uses only information about the thermal noise covariance matrix.     

一种双时间尺度函数Wiener过程性能退化模型

为通过性能退化数据评估产品的可靠性,基于广义Wiener过程提出了一种双时间尺度函数模型以描述产品退化过程。采用极大似然估计(MLE)法求解模型参数,推导了其寿命分布(FTD),进而进行可靠度分析和寿命评估。对模型进行了Monte Carlo模拟验证和实例应用,并将目前常用的混合效应Wiener过程模型作为参考方法进行了对比分析。结果表明:根据90%可靠度曲线的定义,该方法较参考方法的结果更为合理、准确。进一步的寿命评估结果表明,该方法与参考方法的平均寿命相差232.9h,90%可靠寿命结果相差109.4h,且参考方法计算结果偏于危险。      

Convex optimization of asteroid landing trajectories driven by solar radiation pressure

High-area/mass ratio landers driven by Solar Radiation Pressure(SRP) have potential applications for future asteroid landing missions. This paper develops a new convex optimization-based method for planning trajectories driven by SRP. A Minimum Landing Error(MLE) control problem is formulated to enable planning SRP-controlled trajectories with different flight times. It is transformed into Second Order Cone Programming(SOCP) successfully by a series of different convexification technologies. A t...