Effect of Envelope Limiting in Adaptive Array Control Loops

The properties of an adaptive array antenna, including transient response rate and control loop noise, depend on the intensity of the external noise field. This dependence can be reduced by envelope hard limiting in the control loops, without degrading the performance of the adaptive array.     

Control-Loop Noise in Adaptive Array Antennas

Adaptive array receiving antennas can be designed to sense the external noise field and to optimize the array illumination function. A substantial improvement in signal-to-noise ratio can be obtained with adaptive arrays when the external noise field is nonuniformly distributed in angle. The external noise process may be time varying and contain both discrete sources and continuously distributed sources. Two adaptive array implementations which maximize the signal-to-noise ratio are described in this paper. Expressions are derived for control-loop noise, i.e., the variance of the array element weights, and for the additional noise in the array output due to this element weight noise. It is shown that both the element weight noise and the array convergence rate are determined by the eigenvalues of the noise covariance matrix.     

Theory of Adaptive Radar

This paper reviews the principles of adaptive radar in which both the spatial (antenna pattern) and temporal (Doppler filter) responses of the system are controlled adaptively. An adaptive system senses the angular-Doppler distribution of the external noise field and adjusts a set of radar parameters for maximum signal-to-interference ratio and optimum detection performance. A gradient technique for control of the radar array/filter weights is described and shown to generate weights which asymptotically approach optimum values. Simulation results illustrate the convergence rate of adaptive systems and the performance improvement which can be achieved.     

Proposals for Simplifying Envelope Normalization in Adaptive Antenna Arrays

In adaptive antenna arrays using control loops the processing is determined under certain conditions by the covariance matrix Bmn = E(f(v*m)vn)?n), where ?1,..., ?N are N-complex Gaussian noise video signals and f is some function of the phase of ?m. Half of the storages and real multiplications could be saved by taking only the real part of ?n. It will be shown that this can be done without changing the performance of the adaptive antenna array significantly.     

小波域的自适应波束形成算法

在分析传统自适应波束形成的基础上,首次提出了一种小波域的自适应波束形成算法。与通常的自适应波束形成算法相比,该算法利用小波变换对小波空间进行了分解,信号经小波变换自相关性会下降,收敛速度提高,同时在此分解过程中,根据信号与白噪声在不同尺度上的小波变换模极大值表现完全不同的特性进行信号的消噪。理论分析和仿真结果表明了该算法收敛速度较快,且计算量增加较少,易于实时实现,而且具有较好性能。同时仿真实验表明该算法收敛速度与小波基和尺度的选择有关,尺度越大收敛速度越快;对于同一小波基系列,小波基的正则性越好收敛速度越快。     

The Effect of Integrator Pole Position on the Performance of an Adaptive Array

The LMS adaptive array requires an integrator in each weight feedback control loop. In practice the integrator is often replaced by a low-pass filter, i.e., by a filter with a single pole at s = - ? (where s is complex frequency). The effect of this pole position on array performance is examined. It is shown that to obtain optimal performance from the array, ? must be less than k?2, where k is the loop gain and ?2 is the thermal noise power per element. When at exceeds k?2, the output signal-to-inter ference-plus-noise ratio from the array is degraded for intermediate values of interference power.     

Fast Algorithms for Time Domain Broadband Adaptive Array Processing

Recursive algorithms are presented for time domain, broadband, adaptive beamforming. The algorithms are rapidly converging and can be computationally efficient for a certain range of array processor parameters. The algorithms are presented for two forms of array processor. One form is a Frost-type structure in which explicit constraints are required for defining the array-look direction and also to control the sensitivity of the array processor to implementation errors. The other form is a partitioned array processor in which constraints are built into the processor and the adaptive weight control algorithm is therefore unconstrained. The two processors presented are both element-space processors but the algorithms can be applied also to beam-space processors.     

Equivalent transformation for a partially adaptive array

A partially adaptive array is one in which elements of a phased array are controlled or adaptively weighted in groups or in which certain elements, called auxiliary elements, are made controllable. Mathematically, this type of array is formed by transforming all of the elements of an array by a nonsquare matrix such that the resulting output vector has a length less than the number of array elements. It is shown that there is an equivalent matrix transform that can effectively be utilized in analyzing the partially adaptive array's performance when a small number of external jammers are present. Processor implementation and convergence rate considerations lead to the desirability of reducing the dimensionality of the cancellation processor while maintaining good sidelobe interference protection. A meaningful measure of canceller performance is to compute the optimal output signal-to-noise ratio. This expression is a function of the jammer, direction-of-arrival vectors (DOAVs), jammer powers, the array steering vector, and internal noise. It is shown that if this expression is computed for the fully adaptive array then it is easily computed for the partially adaptive array by transforming the jammer DOAVs and the steering vector by the orthogonal projection matrix defined by the rows of the subarray transformation matrix and substituting these vectors back into the original expression for the fully adaptive array     

Multiplier Offset Voltages in Adaptive Arrays

The effects of multiplier offset voltages in adaptive arrays are examined. Multiplier offset voltages arise when active circuits are used to implement the error-by-signal multipliers required in an array based on the LMS algorithm. These offset voltages are known from experimental work to have a strong effect on array performance. It is first shown how multiplier offset voltages may be included in the differential equations for the array weights. Then their effect on weight behavior is studied. It is found that the offset voltages affect the final values of the weights, but not the time constants. Furthermore, the effect they have is influenced by the amount of element noise in the array. An adequate amount of noise is necessary to minimize weight errors due to offset voltages. An example is treated to show the effect of offset voltages on the final array weights and the output signal-to-noise ratio (SNR). With offset voltages present, it is found that there is a maximum SNR that can be obtained from the array. A specific input SNR is required to obtain this maximum output SNR. Finally, it is shown that a finite operating range for the weights places a further restriction on the acceptable values of offset voltages and noise.     

Analysis of a Signal Processor for an Antenna Array

A signal processor that provides ratio-squared predetection combining, has been investigated for application in an adaptive antenna array. The analysis and experimental data presented here pertain to the signal processing gain when the antenna array is illuminated by a coherent signal source and a partially coherent noise source. For a noise source which is coherent, the processing gain depends on relative strength of the signal and noise, relative directions of arrival, and the usual "array factor." The array exhibits capturing effects much as in an FM receiver. The effective antenna pattern is a superposition of two beams of different magnitudes, one directed to the signal source and the other to the noise source. When the noise is partially coherent, the behavior of the signal processor is quite complex. Analytical prediction and experimental simulation measurement on a four-channel system indicate that the partially coherent noise may be regarded as the source of an incoherent noise component plus a coherent noise component with the magnitude of the latter determined by the coherence coefficient for the noise source.     

Adaptive array CFAR detection

Presented here is a large class of adaptive array detection algorithms with constant false alarm rate (CFAR), so that the false alarm rate can be set to any preassigned number without knowledge of the noise covariance matrix. This class map incorporate any usual method of cell averaging and any method for array weight vector synthesis. A sufficient condition for CFAR is derived, which is easy to satisfy in practice. Basic system parameters are discussed. An example of detection performance for a simple cell-averaging detector, in which the array weight vector is synthesized by the method of diagonal loading, is provided using Monte Carlo simulations     

圆台阵列杂波模型及空时二维自适应处理

针对圆台共形阵列,建立了空时二维自适应处理(STAP)的杂波模型,给出了圆台阵列杂波抑制最优权值的计算方法。在此基础之上,为了实现可应用到实际环境中的自适应处理方法,进一步讨论了将局部联合域(JDL)降维算法推广至圆台阵列中的问题。得出了圆台阵列JDL算法降维变换矩阵的表达形式,研究了参考波束的数目选取、波束指向等因素对降维损失的影响。理论分析以及仿真结果表明,通过合理选择通道数、波束方位向指向间隔等参数,该算法能够减少自适应波束形成的计算量,而且可以用较少的训练样本获得较好的处理性能。     

Wideband cancellation of interference in a GPS receive array

We have demonstrated that by using an adaptive space-time array the interference from multiple, strong interferers plus multipath can be canceled down close to the noise floor without producing serious loss or distortion of a GPS signal. Design criteria are presented and limitations are examined. We also compare space-time processing with suboptimum space-frequency processing, and demonstrate by simulation that for equal computational complexity space-time processing slightly outperforms suboptimum space-frequency processing     

The Effects of Gaussian Interference on Communication Systemswith Adaptive Arrays

The performance of a bandlimited binary phase-shift-keyed (BPSK) communication system is examined when the received BPSK signal is corrupted by both thermal noise and a directional Gaussian noise interfering signal. The system uses an LMS adaptive array to suppress this interference. The effects of signal power levels, arrival angles, bandwidths, and the array bandwidth are examined. The performance of a system that uses tapped delay lines for the array weights is also examined. It is shown that the performance of a system with tapped delay lines is not affected by the interference bandwidth for a single interferer.     

A self-normalizing gradient search adaptive array algorithm

A method is described to normalize the step parameter and perturbation amount used for gradient search adaptive algorithms. The step normalization assures rapid stable convergence. The perturbation normalization also assures rapid stable convergence and limits the output perturbation noise to a level below thermal noise. The normalizations are computationally simple and are consistent with the use of a single receiver at the adaptive array output. Results are presented to verify the robustness of the technique.<>     

Effects of finite weight resolution and calibration errors on theperformance of adaptive array antennas

Adaptive antennas are now used to increase the spectral efficiency in mobile telecommunication systems. A model of the received carrier-to-interference plus noise ratio (CINR) in the adaptive antenna beamformer output is derived, assuming that the weighting units are implemented in hardware, The finite resolution of weights and calibration is shown to reduce the CINR. When hardware weights are used, the phase or amplitude step size in the weights can be so large that it affects the maximum achievable CINR. It is shown how these errors makes the interfering signals “leak” through the beamformer and we show how the output CINR is dependent on power of the input signals. The derived model is extended to include the limited dynamic range of the receivers, by using a simulation model. The theoretical and simulated results are compared with measurements on an adaptive array antenna testbed receiver, designed for the GSM-1800 system. The theoretical model was used to find the performance limiting part in the testbed as the 1 dB resolution in the weight magnitude. Furthermore, the derived models are used in illustrative examples and can be used for system designers to balance the phase and magnitude resolution and the calibration requirements of future adaptive array antennas     

An anticipative adaptive array for frequency-hopping communications

To fully utilize the theoretical processing gain achievable when an adaptive array and frequency hopping are combined, frequency compensation is required. Improved versions of an anticipative adaptive array are examined that provide efficient compensation by adapting the complex weights at each antenna element to the appropriate values for a carrier frequency before that frequency is received. The underlying adaptive algorithm used is the maximum algorithm. Computer simulation results are used to compare the different versions of anticipative processing. These results show that an appropriate version ensures the rapid convergence of weights to values that provide wideband nulling of the interference and noise     

Theory of partially adaptive radar

This work extends the recently introduced cross-spectral metric for subspace selection and dimensionality reduction to partially adaptive space-time sensor array processing. A general methodology is developed for the analysis of reduced-dimension detection tests with known and unknown covariance. It is demonstrated that the cross-spectral metric results in a low-dimensional detector which provides nearly optimal performance when the noise covariance is known. It is also shown that this metric allows the dimensionality of the detector to be reduced below the dimension of the noise subspace eigenstructure without significant loss. This attribute provides robustness in the subspace selection process to achieve reduced-dimensional target detection. Finally, it is demonstrated that the cross-spectral subspace reduced-dimension detector can outperform the full-dimension detector when the noise covariance is unknown, closely approximating the performance of the matched filter.     

相阵列技术在民机机体气动噪声研究中的应用

麦克风相阵列测量技术是进行民机机体气动噪声研究的主要手段。针对民机机体气动噪声,开展了闭口风洞麦克风相阵列测量技术研究。提出了一种适用于闭口风洞气动噪声测量的阵列优化设计方法,分别设计了适用于民机增升装置、起落架气动噪声测量的阵列。将麦克风相阵列技术应用于某飞机增升装置缩比模型、起落架缩比模型气动噪声闭口风洞试验。研究结果显示：利用侧壁阵列清晰地识别出了增升装置主要气动噪声源,并显示出降噪措施的降噪效果;利用组合阵列,实现了较宽频率范围内起落架气动噪声源探测,识别出了起落架主要气动噪声源。     

Principal components, covariance matrix tapers, and the subspaceleakage problem

A new class of robust space-time adaptive beamforming techniques is introduced to address a broad range of subspace leakage phenomena that arise in many sensor array applications. When present, these leakage phenomena can significantly increase the effective rank of the dominant colored noise interference spectrum, thereby reducing the appeal of techniques that exploit low-rank dominant interference (such as principal components (PC) or diagonal loading) to reduce sample support (training) requirements. By combining the covariance matrix taper (CMT) approach with either PC or diagonal loading, the minimal sample support properties of these techniques can be preserved