首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
本文根据民航卫星通信网的具体情况,讨论了网内卫星通信地球站射频低噪声放大器的性能指标要求,在此基础上提出一种简便、实用且又符合民航卫星通信网运行维护要求的LNA在线测试方法。  相似文献   

2.
基于噪声匹配的有源接收天线设计   总被引:1,自引:0,他引:1  
为了提高接收天线的增益和灵敏度,采用将天线与低噪声放大器集成到一起设计的方案,将天线的输出阻抗作为放大器的源阻抗,省略了天线与放大器之间的阻抗匹配网络。通过调节天线馈电系统的尺寸调节天线阻抗,使其等于放大器的最佳源阻抗。利用HFSS仿真软件计算天线的辐射特性及阻抗,用ADS Designer软件对低噪声放大器进行优化设计。利用2SC5507晶体管设计了一个工作于2.0GHz的与低噪声放大器集成在一起的缝隙耦合微带天线,所设计的噪声系数为1.664dB,放大器增益为16.75dB。  相似文献   

3.
针对在高密度封装的微波模块中MMIC芯片性能测试不精确导致故障定位不准确的修理需求,借助探针台开展了GaAs驱动放大芯片、GaAs低噪声放大芯片的在片测试研究,掌握了MMIC芯片在片测试的方法,通过测试结果与本身芯片资料的对比,可直观反应芯片本身性能是否下降或损坏。该方法可以精确地对高集成化、小型化微波模块中的微波MMIC芯片进行性能测试并判定故障。相关研究成果已应用于X波段T/R组件的修理。  相似文献   

4.
本文介绍一种10通道NovAtel GPS单板接收机。这种接收机是一种价格低廉高性能的GPS接收机扳,它具有支持所有OEM应用的特性和能力。位于Calgary的NovAtel是一家蜂窝系统和用户设备制造厂,已被立研制了一种全新的GPS接收机。接收机每一级主要部件的设计部采用了先进技术,包括天线、射频下变频器、低噪声放大器、ASIC信号处理器、CPU和可用软件配置的接口。这种接收机有十个专用通道,可进行精密的C/A码和L_1载波相位跟踪。本文叙述了已获专利的采用宽带多比特采样方法(能满足P码精度)的C/A码跟踪方案。NovAtel的GPS接收机板既能输出原始数据又能输出最终位置数据,其输出速率能满足最高要求的应用。  相似文献   

5.
针对超磁致伸缩致动器(GMA)输出位移有限的问题,采用柔性铰链放大机构放大GMA输出位移,利用材料力学理论、拉格朗日动力学方程和有限元法对柔性铰链放大机构的位移放大倍数、动力学特性进行了分析.结合Jiles-Atherton(J-A)模型和二次畴转模型建立了柔性铰链放大式GMA的磁弹耦合模型,并在软件AMESim&Simulink联合仿真环境中进行了数值仿真.制作了柔性铰链放大式GMA样机,对其进行了动态性能实验,仿真和实验表明:经过放大,柔性铰链放大式GMA输出位移可以达到0.4mm;频带宽超过100Hz;所建立的磁弹耦合模型是有效的.   相似文献   

6.
固态光学陀螺的优势正受到一种新型的旋转质量装置的挑战,这种较低成本的器件具有良好的低噪声漂移及高可靠性的性能。微型战术陀螺是一种性能优良的双轴陀螺,它采用先进的旋转质量装置的技术,以建立新的低成本标准。它具有不不带挠性支撑系统的调谐转子陀螺的低噪声性能。综合了球形动压气浮轴承及三轴永磁直流电机和力矩器的优点,设计成动态范围大于10^7的微型双轴陀螺。本文介绍了该设计及验证这种低成本下一代速率陀螺性  相似文献   

7.
通过研究国内外主要测控通信技术现状与发展动态,梳理出了目前我国在月地及月地以远距离测控通信技术遇到的挑战:面临测量精度尚不能满足科学探测更高的要求,数据传输能力难以满足更高的数据传输速率需求,关键器件自主可控较为薄弱,激光通信高精度快速捕获手段单一,以及星载终端设计与关键技术在轨验证较少等。针对这些问题,提出了对天线组阵、激光测控通信技术、Ka波段及毫米波低温接收机、超导纳米线单光子探测器、深空光学跟瞄系统、窄线宽激光光源的产生技术、光通信调制技术和高功率低噪声放大器的迫切需求,并介绍了国外最新的用于深空测控通信的新概念与前沿技术,即一体化微波/光学混合通信系统与微波光子射频信号稳相传输技术。最后,结合我国现状,讨论了我国测控通信重点发展方向及其关键技术的建议,可供构建月地及月地以远测控通信系统参考。  相似文献   

8.
陀螺系统的微机械敏感结构部分的性能提升受到成本、工艺的限制,有较高难度,故提升接口电路的各项性能成为提升整个系统性能的关键。因此,电容读出电路作为微机械陀螺系统中非常重要的组成部分,该电路性能的优劣直接决定着陀螺的测量精度。为实现硅微陀螺高精度检测,设计了一款低噪声的电容读出电路。在陀螺与读出电路之间设计斩波开关,基于斩波技术进行低噪声设计,采用相关双采样技术用来降低关键的第一级放大电路的低频闪烁噪声和开关噪声。采用了一种简化的陀螺测试模型,用于读出电路的独立测试。读出电路在0.18μm CMOS工艺下设计流片,测试结果表明,该电容读出电路输出噪声为-122.8dBV/Hz1/2,可实现0.06aF/Hz1/2的电容分辨率。  相似文献   

9.
基于核方法的航空发动机推力估计器设计   总被引:1,自引:5,他引:1       下载免费PDF全文
刘毅男  张胜修  张超 《推进技术》2013,34(6):829-835
鉴于实现航空发动机的直接推力控制需要高精度及高可靠性的推力估计器,基于核方法,提出了结合全局核k-means聚类与鲁棒最小二乘支持向量回归机的推力估计器设计方案,通过核诱导的隐性映射将原始输入数据映射到特征空间,使数据样本特征信息被提取并放大,具有更好的可分性.在每个聚类内设计推力子估计器,用鲁棒代价函数代替最小二乘代价函数,增强了推力估计器的整体鲁棒性.通过对涡扇发动机的仿真试验表明,本推力估计器设计方法能够满足直接推力控制需要,与其它方法相比,在估计精度及鲁棒性上存在一定优势.  相似文献   

10.
为了进一步满足振梁式加速度计(VBA)对前端放大接口电路增益、带宽以及噪声的更高要求,提出了一种适用于硅微振梁式加速度计的可实现增益、带宽独立调控的低噪声前端放大接口电路。该设计基于T型接口电路的两级拓扑结构,有效解决了增益、带宽和噪声之间的制约问题。通过仿真与实验结果表明,该设计在等效跨阻增益为40MΩ的前提下,最终实现了带宽为410kHz、相位误差为1.2°、等效输入电流噪声密度为■。基于该设计的实验样机在上电稳定后1h零偏不稳定性达1.156μg,相较于传统一级跨阻接口电路减小了49.2%(2.274μg),验证了该新型接口电路的可行性和优越性。  相似文献   

11.
This work describes the principle of operation, assembly and performance of one branch of the 44 GHz back end module (BEM) for the Planck low frequency instrument (LFI). This subsystem constitutes a fully representative branch of the qualification-model version (QM). It includes waveguide to microstrip transition, GaAs pseudomorphic high electron mobility transistor (PHEMT) low noise amplifiers (LNA), bandpass filter, square-law detector and dc amplifier. The fundamentals of the design of the RF part are described and all of the components have been tested individually before integration. Using single tone and wideband noise stimuli, the output voltage has been measured for several input powers, in order to obtain the sensitivity factor of the complete BEM. The effective bandwidth and the equivalent noise temperature have been calculated from the measurements, taking into account the frequency dependence on the noise source and the BEM. Finally, the low frequency output power spectrum has been obtained and a maximum 1/f knee frequency around 200 Hz has been measured with a 3 dB output signal video bandwidth above 50 KHz.  相似文献   

12.
This paper presents a production-oriented chip-set to be used as the circuitry needed to implement the necessary RF functionalities of a new generation of S-band satellite transponders for telemetry tacking and control (TT&C) applications. The RF hardware section integration is achieved by means of a customized chip-set of just four multi-chip multifunction MMIC (MCMM) modules. The functions contained in the monolithic microwave integrated circuits (MMICs) include the active circuits needed for the front-end low noise amplifier (LNA), the RF and IF converters, all the variable gain amplifiers (VGAs), the Voltage Controlled Oscillator (VCO) for both transmit and receive sections, the frequency prescaler and multiplier needed to synthesize the frequency plan as well as the Local Oscillator (LO) amplifiers. The selected technology is GaAs, mainly due to its radiation hardness, essential for aerospace applications, and good reliability. Issues such as suitable circuit topology, efficient dc biasing, circuit area minimization, cost-oriented system design and advanced packaging techniques have been addressed during the design. Measurements and yield results from the manufactured circuits will be presented showing that these components, even though especially designed in the frame of the GALILEO TT&C transponder predevelopment, are suitable for a variety of missions, from Deep space to near Earth, including spread-spectrum transponders with precision ranging function.  相似文献   

13.
高超声速飞行器表面温度分布与气动热耦合数值研究   总被引:4,自引:0,他引:4  
针对高超声速飞行器热防护设计中的高温气体非平衡效应问题和气动热环境精确预测问题,基于流场的非平衡Navier-Stokes方程、表面的能量守恒方程和内部的热传导方程,考虑流场的非平衡效应、表面的热辐射效应、催化效应和烧蚀效应以及热防护层内部的热传导效应,建立了初步的表面温度分布与气动热的耦合计算方法,完善了高超声速飞行器气动物理流场计算软件(AEROPH_Flow)。在表面材料为碳-碳(C-C)条件下,对飞行高度为65km和飞行速度为8,10km/s的半球以及飞行高度为50km和飞行速度为8km/s的球锥模型,开展了表面温度分布与气动热的耦合计算,验证了计算方法和计算软件,分析了表面温度分布对气动热环境的影响。研究结果表明:表面温度分布对气动热的计算结果有较大影响,在气动热环境的预测中,不仅要考虑热化学非平衡效应和表面催化效应的影响,还要考虑表面温度分布的影响,最好是采用表面温度分布与气动热耦合计算的方法,以减小表面温度分布对气动热计算结果的影响。为此,需要发展完善非平衡流场/表面催化和烧蚀/热传导温度场(气/表/固)的计算模型、耦合求解技术和计算软件,实现对高超声速飞行器的真实飞行条件下高温气体非平衡效应和气动热环境的精确模拟。  相似文献   

14.
吸气式高超声速飞行器多学科动力学建模   总被引:3,自引:1,他引:3  
华如豪  叶正寅 《航空学报》2015,36(1):346-356
高超声速飞行器一体化设计中存在气动/热/推进/结构弹性相互耦合的问题,首先根据飞行器的机体/发动机一体化设计思想构造了二维高超声速飞行器模型,并基于激波/膨胀波原理和动量定理建立了气动力模型,采用Chavez和Schmidt建立的超燃冲压发动机推进系统模型;在飞行器结构方面,引入变截面和变质量分布的自由梁结构模型,并采用Eckert参考焓方法分析的气动加热过程中承力梁不同轴向位置温度随时间变化特征,在此基础上运用模态法计算了燃料消耗和气动加热条件下结构的固有频率和振型特征,获得结构弹性变形的模型;最后建立了考虑热气动弹性和推进系统作用的飞行动力学方程。研究结果表明:质量变化对结构弹性特性影响比较显著,而气动加热的影响主要表现在振动频率方面,且会随着加热过程的持续而逐渐增强;结构变形会改变飞行器静配平状态,特别是在机体质量较大的最初飞行阶段,气动加热会强化结构变形对配平特征的影响;线性化系统的动力学特征分析表明,质量减小和结构变形均会增加短周期模态和振荡模态的不稳定特性,而对高度特性的影响不大,气动加热效应会进一步增加飞行力学和气动弹性的耦合特征,并导致弹性模态的稳定性降低。  相似文献   

15.
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.   相似文献   

16.
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).  相似文献   

17.
Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters   总被引:1,自引:0,他引:1  
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.  相似文献   

18.
方波幅度的测量不确定度   总被引:3,自引:1,他引:3  
介绍了用众数法评价方波幅度时的不确定度分析和评价过程;讨论了主要的不确定度来源,包括众数判别区间的影响、波形测量系统幅度测量误差的影响等等;给出了减小不确定度的主要措施,并结合一个实例,给出了方波幅度的不确定度评价结果。  相似文献   

19.
ν-gap度量及其在飞行控制律评估中的应用   总被引:1,自引:0,他引:1  
刘林  纪多红  唐强 《航空学报》2007,28(4):930-934
 传统控制律评估方法主要用于单输入单输出(SISO)系统,且对模型参数摄动考虑不够全面,针对这些不足,研究了ν-gap度量方法。在介绍系统广义稳定裕度相关概念的基础上,给出了ν-gap度量的定义、特点和性质以及近似摄动模型的计算,提出ν-gap度量评估控制律的步骤。实例结果表明,该方法不仅克服了上述传统评估方法的缺陷,而且还有根据所求的各摄动影响情况忽略影响小的元素,以减少计算量及可以找到最坏情况下的参数摄动组合等优点。  相似文献   

20.
基于QPSO-ELM的某型涡轴发动机起动过程模型辨识   总被引:1,自引:0,他引:1  
伍恒  李本威  张赟  杨欣毅 《航空学报》2018,39(11):322251-322261
针对解析法建立某型涡轴发动机起动过程模型困难的问题,提出一种基于量子粒子群优化-极限学习机(QPSO-ELM)的某型涡轴发动机起动过程模型数据驱动辨识方法。首先构建基于状态空间法描述的某型涡轴发动机起动过程分段模型,然后结合发动机起动试验数据,采用QPSO-ELM算法对该起动模型进行辨识,试验结果表明:燃气发生器转子转速、发动机输出轴转速和燃气涡轮后温度的辨识结果都良好地逼近了实测数据,最大相对误差的均值分别为1.358%、1.628%和2.195%,满足实际应用的精度需求,并且QPSO-ELM的辨识精度优于极限学习机(ELM)、支持向量机(SVM)和反向传播(BP)神经网络。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号