Spatially distributed target detection in non-Gaussian clutter

Two detection schemes for the detection of a spatially distributed, Doppler-shifted target in non-Gaussian clutter are developed. The non-Gaussian clutter is modeled as a spherically invariant random vector (SIRV) distribution. For the first detector, called the non-scatterer density dependent generalized likelihood ratio test (NSDD-GLRT), the detector takes the form of a sum of logarithms of identical functions of data from each individual range cell. It is shown under the clutter only hypothesis, that the detection statistic has the chi-square distribution so that the detector threshold is easily calculated for a given probability of false alarm P_F. The detection probability P_D is shown to be only a function of the signal-to-clutter power ratio (S/C)_opt of the matched filter, the number of pulses N, the number of target range resolution cells J, the spikiness of the clutter determined by a parameter of an assumed underlying mixing distribution, and P_F. For representative examples, it is shown that as N, J, or the clutter spikiness increases, detection performance improves. A second detector is developed which incorporates a priori knowledge of the spatial scatterer density. This detector is called the scatterer density dependent GLRT (SDD-GLRT) and is shown for a representative case to improve significantly the detection performance of a sparsely distributed target relative to the performance of the NSDD-GLRT and to be robust for a moderate mismatch of the expected number of scatterers. For both the NSDD-GLRT and SDD-GLRT, the detectors have the constant false-alarm rate (CFAR) property that P_F is independent of the underlying mixing distribution of the clutter, the clutter covariance matrix, and the steering vector of the desired signal     

Adaptive detection schemes in compound-Gaussian clutter

Radar detection of coherent pulse trains embedded in compound-Gaussian disturbance with partially known statistics is discussed. We first give a thorough derivation of two recently proposed adaptive detection structures. Next, we derive a different detection scheme exploiting the assumption that the clutter is wide-sense stationary. Resorting to the theory of circulant matrices, in fact, we demonstrate that the estimation of the structure of the clutter covariance matrix can be reduced to the estimation of its eigenvalues, which in turn can be (efficiently) done via fast Fourier transform codes. After a thorough performance assessment, mostly carried on via computer simulations, the results show that the newly proposed detector achieves better performance than the two previously introduced adaptive detectors. Moreover, a sensitivity analysis shows that, even though this detector does not strictly guarantee the constant false alarm rate property with respect to the clutter covariance matrix, it is robust, in the sense that its performance is only slightly affected by variations in the clutter temporal correlation     

Asymptotically optimum radar detection in compound-Gaussian clutter

An asymptotically optimum receiver designed for detecting coherent pulse trains in compound-Gaussian clutter is introduced and assessed. The proposed receiver assumes knowledge of the structure of the clutter covariance matrix, but does not require that of its amplitude probability density function (apdf). Performance is analytically evaluated, showing that the loss, as measured with respect to the corresponding optimum structure, is kept within a few dBs even for a relatively small number of integrated pulses and that it largely outperforms the matched-filter detector under all instances of practical interest. Interestingly, the proposed detector achieves constant false alarm rate (CFAR), regardless of the clutter envelope distribution and, consequently, its power     

先验失配条件下的知识辅助检测器稳健性分析

充分利用探测环境的先验信息是提高雷达探测能力的有效途径之一。先验信息必须在雷达检测算法设计阶段确定下来,因此先验信息与当前探测环境之间可能存在不一致性。以复合高斯杂波中的、利用纹理分量先验信息的知识辅助(KA)检测器作为研究对象,首先建立了该检测器检测性能与先验分布参数失配之间的量化关系,然后根据给定的杂波探测环境模型参数,分析了先验模型失配对检测性能的影响。分析结果表明:知识辅助检测器的稳健性与当前探测环境模型参数有关。进一步给出了先验模型失配的容许区间,当先验模型参数在这个区间内,知识辅助检测器性能优于不使用先验信息的检测器性能。     

Some Properties and Effects of Reverberation in Acoustic Surveillance

Following the work of Van Trees,[1] the effect of wide-sense stationary clutter on signal detectability with a matched filter is determined. The improvement to be gained by a high time-bandwidth product in the transmitted waveform for the detection of low-velocity targets is clearly shown. The additional noise contributed by the clutter is reduced by a factor equal to the time-bandwidth product. This reducing effect occurs provided that the transmitted waveform is adjusted properly. The optimum transmitted waveform for detection of low-velocity targets turns out to be one whose energy density spectrum is flat over the bandwidth of interest. This derivation is made by a simple application of Schwarz's inequality rather than the application of the calculus of variations that was done by Manasse.[14] Computations were made of the loss encountered by a narrow-band single-frequency waveform and by a wide-band linear FM waveform, each used in a matched-filter detector. The contrast is especially marked for very low target speeds where the narrow-band waveform is very bad. Its loss drops off sharply with target speed while the loss of the wide-band waveform drops off very slowly in comparison. Beyond a certain small target speed, the narrow-band loss is negligible. However, with enough bandwidth, the wide-band waveform can be made to have acceptable loss at all target speeds.     

非相干Rice杂波中的恒虚警检测

 地杂波的统计特性常常可以用Rice模型来描述,其物理基础是认为地杂波由一些大的固定散射体引起的稳定分量和大量小的随机分布的运动散射体引起的瑞利起伏分量所合成。文献[2]研究了稳定分量不相干时Rice杂波中离散时间最佳检测的估值器——相关器结构,但无显式解,实现有困难。文献[3]导出了Rice杂波中SwerlingⅡ目标的离散时间检测的似然比检测器结构。在此基础上,本文给出了一种修正平方律结构的似然比检测器,并和通常的平方律检测器作了性能比较。     

Vector subspace detection in compound-Gaussian clutter. Part I: survey and new results

Deals with the problem of detecting subspace random signals against correlated non-Gaussian clutter exploiting different degrees of knowledge on target and clutter statistical characteristics. The clutter process is modeled by the compound-Gaussian distribution. In the first part of the paper, the optimum Neyman-Pearson (NP) detector, the generalized likelihood ratio test (GLRT), and a constant false-alarm rate (CFAR) detector are sequentially derived both for the Gaussian and the compound-Gaussian scenarios. Different interpretations of the various detectors are provided to highlight the relationships and the differences among them. In particular, we show how the GLRT detector may be recast into an estimator-correlator form and into another form, namely a generalized whitening-matched filter (GWMF), which is the GLRT detector against Gaussian disturbance, compared with a data-dependent threshold. In the second part of this paper, the proposed detectors are tested against both simulated data and measured high resolution sea clutter data to investigate the dependence of their performance on the various clutter and signal parameters.     

Optimal CFAR detection in Weibull clutter

Optimal, in the maximum likelihood sense, constant false-alarm rate (CFAR) detection for Weibull clutter statistics, is investigated. The proposed OW (optimal Weibull) estimator is proved to be an asymptotically efficient estimator of the mean power of the Weibull clutter. Theoretical analysis of the OW-CFAR detector is provided, while detection performance analysis is carried out using the Monte Carlo simulation method. The operation of the median and morphological (MEMO)-CFAR detector in Weibull clutter statistics is also explained. It performs almost optimally in uniform clutter and, simultaneously, it is robust in multitarget situations. The performance of the proposed OW-CFAR detector in uniformal Weibull clutter is used as a yardstick in the analysis of the MEMO cell-averager (CA) and ordered statistic (OS) CFAR detectors. Nonfluctuating and fluctuating (Swerling II) targets are considered in detection analysis. The performance of the detectors is also examined at clutter edges     

Nonparametric rank detectors under K-distributed clutter in radar applications

This correspondence deals with a comparative analysis of parametric detectors versus rank ones for radar applications, under K-distributed clutter and nonfluctuating and Swerling II target models. We show that the locally optimum detectors (LODs) (optimum for very low signal-to-clutter ratio (SCR)) under K-distributed clutter are not practical detectors; on the contrary, asymptotically optimum detectors (optimum for high SCR) are the practical ones. The performance analysis of the parametric log-detector and the nonparametric (linear rank) detector is carried out for independent and identically distributed (IID) clutter samples, correlated clutter samples, and nonhomogeneous clutter samples. Some results of Monte Carlo simulations for detection probability (P/sub d/) versus SCR are presented in curves for different detector parameter values.     

Matched subspace CFAR detection of hovering helicopters

A constant false alarm rate (CFAR) strategy for detecting a Gaussian distributed random signal against correlated non-Gaussian clutter is developed. The proposed algorithm is based on Scharf's matched subspace detector (MSD) and has the CFAR property with respect to the clutter amplitude probability density function (apdf), provided that the clutter distribution belongs to the compound-Gaussian family and the clutter covariance matrix is known to within a scale factor. Analytical expressions of false alarm and detection probabilities are derived. An application to the problem of detecting hovering helicopters against vegetated ground clutter is reported     

Polarization diversity detection in compound-Gaussian clutter

We present the problem of polarization diversity detection in compound-Gaussian clutter with unknown covariance matrix. To this end we assume that a set of secondary data, free of signal components and with the same covariance structure of the cell under test, is available. Due to the lack of a uniformly most powerful (UMP) detector we resort to a design procedure based upon the Rao and the Wald tests. Specifically we first derive the Rao and the Wald tests assuming that the covariance matrix is known, and then we substitute into the derived decision rules a suitable estimate of the clutter covariance. Interestingly, the newly proposed detectors share the constant false alarm rate (CFAR) property with respect to the texture statistical characterization. Moreover simulation results have shown that the Wald test based detector ensures a performance level higher than the Rao test. We have also conducted a further performance analysis, in the presence of real clutter data and in comparison with the previously proposed generalized likelihood ratio test (GLRT) based receivers, which highlights that, in general, the Wald test receiver outperforms its counterparts. Finally, since the newly proposed decision rules as well as the previously designed GLRTs do not ensure the CFAR property with respect to the clutter covariance matrix, we have developed a sensitivity analysis on the probability of false alarm (P/sub fa/), based on simulated clutter with covariance matrix estimated from real radar data. The results have shown that (P/sub fa/) is only slightly affected by variations in the clutter correlation properties and hence the CFARness is substantially achieved.     

Structures for radar detection in compound Gaussian clutter

The problem of coherent radar target detection in a background of non-Gaussian clutter modeled by a compound Gaussian distribution is studied here. We show how the likelihood ratio may be recast into an estimator-correlator form that shows that an essential feature of the optimal detector is to compute an optimum estimate of the reciprocal of the unknown random local power level. We then proceed to show that the optimal detector may be recast into yet another form, namely a matched filter compared with a data-dependent threshold. With these reformulations of the optimal detector, the problem of obtaining suboptimal detectors may be systematically studied by either approximating the likelihood ratio directly, utilizing a suboptimal estimate in the estimator-correlator structure or utilizing a suboptimal function to model the data-dependent threshold in the matched filter interpretation. Each of these approaches is studied to obtain suboptimal detectors. The results indicate that for processing small numbers of pulses, a suboptimal detector that utilizes information about the nature of the non-Gaussian clutter can be implemented to obtain quasi-optimal performance. As the number of pulses to be processed increases, a suboptimal detector that does not require information about the specific nature of the non-Gaussian clutter may be implemented to obtain quasi-optimal performance     

Importance sampling for characterizing STAP detectors

This paper describes the development of adaptive importance sampling (IS) techniques for estimating false alarm probabilities of detectors that use space-time adaptive processing (STAP) algorithms. Fast simulation using IS methods has been notably successful in the study of conventional constant false alarm rate (CFAR) radar detectors, and in several other applications. The principal objectives here are to examine the viability of using these methods for STAP detectors, develop them into powerful analysis and design algorithms and, in the long term, use them for synthesizing novel detection structures. The adaptive matched filter (AMF) detector has been analyzed successfully using fast simulation. Of two biasing methods considered, one is implemented and shown to yield good results. The important problem of detector threshold determination is also addressed, with matching outcome. As an illustration of the power of these methods, two variants of the square-law AMF detector that are thought to be robust under heterogeneous clutter conditions have also been successfully investigated. These are the envelope-law and geometric-mean STAP detectors. Their CFAR property is established and performance evaluated. It turns out the variants have detection performances better than those of the AMF detector for training data contaminated by interferers. In summary, the work reported here paves the way for development of advanced estimation techniques that can facilitate design of powerful and robust detection algorithms     

基于导航雷达实测数据的CFAR检测算法分析

为提高导航雷达在复杂环境中的目标检测能力,研究了修正中值(MMD)检测器在导航雷达中的应用,并与经典非参量广义符号(GS)检测器和参量最小选择(SO)检测器的检测结果进行对比。仿真结果表明:GS检测器对海上单一目标有较好的检测性能,但是在多目标环境下的检测性能严重下降;SO检测器虽然对上述环境有较好的检测性能,但是由于杂波包络分布类型难以准确已知,杂波抑制能力较差;MMD检测器在多目标环境下有较好的检测性能和杂波抑制能力。     

GLRT subspace detection for range and Doppler distributed targets

A generalized likelihood ratio test (GLRT) is derived for adaptive detection of range and Doppler-distributed targets. The clutter is modeled as a spherically invariant random process (SIRP) and its texture component is range dependent (heterogeneous clutter). We suppose here that the speckle component covariance matrix is known or estimated thanks to a secondary data set. Thus, unknown parameters to be estimated are local texture values, the complex amplitudes and Doppler frequencies of all scattering centers. To do so, we use superresolution methods. The proposed detector assumes a priori knowledge on the spatial distribution of the target and has the precious property of having a constant false alarm rate (CFAR) with the assumption of a known speckle covariance matrix or by the use of frequency agility.     

Studies of target detection algorithms that use polarimetric radardata

Algorithms are described which make use of polarimetric radar information in the detection and discrimination of targets in a ground clutter background. The optimal polarimetric detector (OPD) is derived. This algorithm processes the complete polarization scattering matrix (PSM) and provides the best possible detection performance from polarimetric radar data. Also derived is the best linear polarimetric detector, the polarimetric matched filter (PMF), and the structure of this detector is related to simple polarimetric target types. New polarimetric target and clutter models are described and used to predict the performance of the OPD and the PME. The performance of these algorithms is compared with that of simpler detectors that use only amplitude information to detect targets. The ability to discriminate between target types by exploring differences in polarimetric properties is discussed     

Generalized radar clutter model

A commonly used density model for radar clutter is chi-square for power, or, equivalently, Rayleigh for amplitude. However, for many modern high resolution radar systems, this density underestimates the tails of the measured clutter density. Log normal and Weibull distributions have proved to be better suited for the clutter in these high resolution radars. Generalizing the chi-square density by replacing it with the noncentral chi-square density and allowing the mean power level (the noncentrality parameter) to vary, we can both suitably shape the clutter density to produce larger tails and model the fluctuation of the average clutter power, commonly referred to as speckle. The resulting form, although appearing cumbersome, readily allows for efficient and accurate computations of the probability of detection in clutter     

Adaptive Radar Detection in Doubly Nonstationary Autoregressive Doppler Spread Clutter

The problem of adaptive radar detection in clutter which is nonstationary both in slow and fast time is addressed. Nonstationarity within a coherent processing interval (CPI) often precludes target detection because of the masking induced by Doppler spreading of the clutter. Across range bins (i.e., fast time), nonstationarity severely limits the amount of training data available to estimate the noise covariance matrix required for adaptive detection. Such difficult clutter conditions are not uncommon in complex multipath propagation conditions where path lengths can change abruptly in dynamic scenarios. To mitigate nonstationary Doppler spread clutter, an approximation to the generalized likelihood ratio test (GLRT) detector is presented wherein the CPI from the hypothesized target range is used for both clutter estimation and target detection. To overcome the lack of training data, a modified time-varying autoregressive (TVAR) model is assumed for the clutter return. In particular, maximum likelihood (ML) estimates of the TVAR parameters, computed from a single snapshot of data, are used in a GLRT for detecting stationary targets in possibly abruptly nonstationary clutter. The GLRT is compared with three alternative methods including a conceptually simpler ad hoc approach based on extrapolation of quasi-stationary data segments. Detection performance is assessed using simulated targets in both synthetically-generated and real radar clutter. Results suggest the proposed GLRT with TVAR clutter modeling can provide between 5–8 dB improvement in signal-to-clutter plus noise ratio (SCNR) when compared with the conventional methods.     

Pade approximations for detectability in K-clutter and noise

The Pade approximation (PA) method is used to analyze the detection performance of single and multiple pulse radar systems operating in K-distributed clutter and thermal noise. Simple approximations for false-alarm and detection probabilities are obtained, using lower order moments for the detection decision statistic. Both envelope and squaring detector laws are considered, with noncoherent integration, for independent and correlated K clutter. The target is assumed to be pulse-to-pulse Rayleigh fading. The methods are a substantial application of the PA methods we have previously published     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.