一种基于集中滤波的SINS/DVL/USBL 水下组合导航算法

针对水下运载体的长时间高精度导航问题,提出一种基于集中滤波的捷联惯性导航系统(SINS)/声学多普勒测速仪(DVL)/超短基线(USBL)水下组合导航方法,建立了杆臂在线估计的SINS/DVL速度观测模型和SINS/USBL相对量测信息观测模型,并利用参考信息判定结果实时更新量测方程及维数,既能保证精度,还能一定程度上减少运算量。理论仿真和湖面试验表明,本算法能够实现长时间高精度的水下导航定位,具有可行性。     

水下复杂环境下基于SINS/USBL/DVL多源信息融合的组合导航算法

针对复杂水下声场环境下高精度、长航时导航与定位的需求,构建了捷联惯性导航系统(SINS)/超短基线(USBL)相对测量信息的观测方程和SINS/声学多普勒测速仪(DVL)的观测方程,提出了一种融合SINS/USBL/DVL多源信息的组合定位算法.为解决声学量测信息不确定引起的导航性能下降的问题,充分考虑水声野值所导致的...     

三应答器SINS/USBL紧耦合导航算法

SINS/USBL组合导航误差因素主要包括USBL测距精度误差、USBL测角误差、USBL到SINS的安装误差以及应答器的位置误差,且现有USBL设备的普遍特点为:测距精度高而测角精度相对较差。针对上述误差因素和特点,提出一种三应答器SINS/USBL紧耦合导航算法,避免了USBL测角误差以及USBL到SINS的安装角误差等对导航精度的影响,仿真结果表明能够较大程度上提高组合导航定位精度。此外,该算法无需对安装角进行标定,使用更加便捷。     

复杂水下环境下高精度SINS/USBL误差标定技术

针对SINS/USBL组合系统在导航与定位前需要对一体化样机进行精确标定的问题,对复杂水下声场环境下高精度SINS/USBL误差标定技术展开了研究,包括对安装误差角和空间杆臂误差的估计.基于标定模型的几何关系,推导了标定的状态方程和量测方程,并提出了新型的基于相对量测信息滤波估计的误差标定技术.为解决标定过程中由于存在声学野值而导致滤波估计性能下降的问题,通过高斯牛顿迭代将Huber M估计嵌入到变分贝叶斯框架中,推导了基于M估计的非线性鲁棒自适应标定算法,在精确校正后无需重复标定.仿真的结果验证了该方案的有效性、实用性和鲁棒性.     

一种基于相对测量信息的SINS/USBL组合导航算法

针对使用传统位置匹配算法解决SINS/USBL组合导航的问题,需要先利用USBL输出信息实时求解出载体的绝对位置,设计了一种基于相对测量信息的SINS/USBL组合导航算法.该算法无需求解绝对位置,直接利用超短基线系统原始输出的高度角、方位角和斜距等相对测量信息进行卡尔曼滤波组合导航,且在滤波器设计时能够根据传感器测量精度对滤波参数进行设计,更有针对性.通过理论数据仿真和湖面试验数据处理,证明了该组合导航算法能够在一定程度上提高导航精度,具有可行性.     

基于多参量信息的水下地磁滤波导航算法

由于水下运载器使用地磁滤波导航方法时难收敛、易发散,根据水下运载 器的特点设计了一种基于多参量信息的水下地磁滤波导航算法。针对单纯使用地磁数据 进行位置匹配精度较差的问题,该算法在匹配及滤波过程中引入了地磁强度、航向、航 速等多参量信息,采用非线性滤波框架进行信息融合,采用粒子群算法根据多参量信息 进行位置搜索,并以之为系统滤波的观测值,通过提高位置观测精度改进滤波的收敛性 和鲁棒性。仿真结果表明,算法滤波精度高,稳定性好,能够较好地抑制各类传感器干 扰和误差对滤波估计的影响,适用于水下运载器的地磁导航定位。     

SINS/DVL水下组合导航系统的误差分析与改进技术

探讨了一种适用于SINS/DVL组合导航系统的滤波原理,通过分别建立捷联惯导系统误差模型和多普勒误差模型,利用间接卡尔曼滤波原理和反馈校正法,对系统进行仿真与分析,由惯性器件的误差方差通过导航系统的误差模型得出导航参数的误差方差,结果表明,该组合导航系统的定位精度要远远高于单纯捷联惯导系统。同时,针对SINS/DVL组合导航系统工作特点及特定情况下AUV的定位精度要求,提出了一种GPS辅助SINS/DVL组合导航系统导航定位的方案。     

一种基于可观测度分析的SINS/GPS自适应反馈校正滤波新方法

 针对机载捷联惯导系统(SINS)/全球定位系统（GPS）组合导航系统不完全可观测导致滤波器精度下降甚至发散的问题,提出了一种基于系统状态可观测度分析的自适应反馈校正滤波新方法。该滤波方法改进了系统可观测度的归一化处理方法,将归一化处理后的系统状态可观测度作为反馈因子,对SINS系统进行自适应反馈校正。最后,将该方法应用于机载合成孔径雷达(SAR)运动补偿用SINS/GPS组合导航系统中,飞行试验结果表明该方法在系统不完全可观测的情况下有效地提高了导航精度。     

基于UKF的高动态飞行器无源组合导航系统研究

针对飞行器在进行高动态飞行中卫星导航系统易受干扰、GPS可能被屏蔽,从而导致导航系统失稳甚至发散的问题,采用无迹卡尔曼滤波(UKF)算法对基于捷联惯导系统(SINS)、地磁导航系统(GNS)和嵌入式大气数据系统(FADS)的组合无源导航系统性能进行了改进.建立了地磁数据模型和无源组合导航模型,并针对新的组合导航系统观测方程非线性程度较高问题,提出了利用非线性UKF对导航数据进行融合的方法.利用高动态飞行轨迹对所提出的组合导航系统进行了仿真及误差分析,结果表明该系统对SINS误差估计具有适中的精度.     

基于模糊自适应滤波的水下INS/DVL组合导航研究

由于水下环境的复杂性,多普勒测速(DVL)误差的均值和噪声方差等统计特性均存在跳变现象,影响了INS/DVL组合导航精度。为此提出了一种基于模糊自适应滤波的水下INS/DVL组合导航算法,通过实时监测滤波残差的均值变化以及滤波残差方差与理论滤波残差方差的不一致程度,利用隶属度函数在线修正多普勒测速偏差以及量测噪声的统计特性。本文改进了已有模糊自适应滤波算法未考虑观测误差均值跳变以及对残差方差变化过于敏感的问题,并对DVL零偏跳变进行了修正。试验表明,所提出算法对多普勒测速误差的均值和噪声方差跳变具有较强的适应性,能够有效提高水下INS/DVL组合导航精度。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.