共查询到20条相似文献,搜索用时 125 毫秒
1.
结合某型飞机电力起动系统论述了检测点的选取,建立了故障原因及对应故障代码的故障字典,给出了基于MCS-51单片机电力起动系统故障在线检测的硬件电路设计框图及软件设计主程序流程框图. 相似文献
2.
介绍了一种基于CC1010芯片的无线传感器网络节点设计,分析了传感器网络节点结构和CC1010芯片的功能及应用,探讨了基于CC1010芯片的网络节点机硬件工作原理,据此给出节点的硬件电路设计,并利用C51RF-2型仿真器完成对节点编程.经过测试,基于CC1010芯片的无线传感器网络节点具有无线通信、传感、信息处理等功能,并且具有结构简单、性能稳定、功耗低、抗干扰能力强等优点. 相似文献
3.
某型射击军械系统的射瞄计算机原采用模拟机电式技术实现,存在体积大、功耗大、可靠性及可维护性差等缺点,因此,使用数字式计算机技术对其进行升级改造势在必行.本文首先对原系统的火控原理及火控构型的进行了分析;其次,介绍了射击瞄准计算机的对外接口关系.重点介绍了数字式射击瞄准计算机的采样解算时间的确定、计算方法的选取及接口设计等内容.本文所设计的数字式射击瞄准计算机已通过了系统验证并得到了使用,克服了原有系统所存在的固有缺点.文中的设计思想与所用的工程方法对类似武器系统的升级改造有所借鉴. 相似文献
4.
主要介绍了红外目标模拟器检定装置的工作原理、工作环境和性能指标,着重论述系统设计中的光学设计思路,论证了系统的电路设计原理及实施过程. 相似文献
5.
介绍了ATE系统中一种基于CAN总线的智能电源控制网设计,重点论述了电源控制网的系统构成、硬件设计和软件设计,给出了硬件电路设计框图及软件设计程序流程框图.该电源控制系统工作稳定可靠、操作方便,适用于各类ATE系统. 相似文献
6.
刘龙江 《西安航空技术高等专科学校学报》2005,23(5):24-26
提出论证了一种基于便携式PC的数据采集系统方案,并完成了其控制器DSP的基本电路设计、信号调理电路设计以及与上位机接口通讯的设计,是一种方便、实用、价廉的测试仪器. 相似文献
7.
环形电位计骨架是机电式中心仪上的关键零件,本文介绍了该件的技术要求、加工难点、采取的一系列工艺措施及所取得的效果。 相似文献
8.
在分析高稳定晶体振荡器(OCXO)工作原理的基础上,提出了一种改善晶体振荡器相位噪声的方法.通过低噪声主振电路设计、高精度控温电路设计及机电一体化设计等措施,设计研制了一种宇航用小型化超稳定晶体振荡器(USO),尺寸为99mm×88mm×55mm.经测试,产品短期频率稳定度为2.11×10-13/1s、3.28×10-13/10s、8.61×10-13/100s(Allan方差),相位噪声为-129.4dBc/Hz@1Hz和-147.0dBc/Hz@10Hz. 相似文献
9.
在对直升机旋翼转速调节系统分析研究的基础上,提出了一种基于集成电路设计旋翼转速调节器的总体设计方案,完成了具体电路设计,采用Multisim仿真工具验证了模块电路设计的正确性.实际应用表明,旋翼转速调节器功能完备,各项性能指标满足直升机所提出的性能指标要求,可在直升机上推广使用. 相似文献
10.
基于PCI接口的高速A/D采集电路设计 总被引:2,自引:1,他引:1
描述了一种基于PCI总线接口的高速A/D采样电路设计,提出了基本系统构型和硬件设计的开发思路,阐述了高速A/D芯片的选择、智能控制、PCI接口的电路设计,以及信号完整性设计的一般要求。 相似文献
11.
12.
13.
谢曦鹏 《西安航空技术高等专科学校学报》2014,(3):21-23
分析了某型飞机机电系统的功能和发展状况,结合现代飞机的发展特点,对传统飞机与现代飞机的机电系统进行了分析对比,并介绍了某型飞机的机电综合系统的设计构想。 相似文献
14.
针对数显测高仪各校准点示值误差的校准方法,给出了示值误差的数学模型,并以某校准点为例,对该校准点示值误差的合成标准不确定度和扩展不确定度进行了评定. 相似文献
15.
16.
Rubertus D.P. Hunter L.D. Cecere G.J. 《IEEE transactions on aerospace and electronic systems》1984,(3):243-249
Electromechanical actuation is a critical element that must be developed and verified to make the all-electric aircraft a viable concept. For several years the Flight Control Division of the Air Force Wright Aeronautical Laboratories has sponsored activities to demonstrate the credibility of electromechanical actuation systems (EMAS) for primary flight control actuation functions. The foundation for these EMAS activities and several electromechanical actuation development programs are described here. One involves the design, fabrication, and laboratory test of a rotary, hingeline electromechanical actuator. Another involves the development and flight test demonstration of a linear electromechanical actuator for controlling an aileron of a C-141 aircraft. A third involves the design and development of a linear electromechanical actuator for missiles having severe performance, temperature, and volumetric requirements. In addition, a brief summary of the results from two aircraft actuation trade studies compare the baseline (conventional) hydraulic flight control system with an all-electric airplane concept including quantitative comparisons of weight, reliability and maintainability, and life cycle costs. 相似文献
17.
18.
水银温度计视觉检定系统中的数字图像处理技术研究 总被引:1,自引:0,他引:1
提出了一种基于计算机视觉的水银温度计自动检定系统。首先构建了水银温度计自动检定系统的体系结构,重点研究了数字图像处理技术在温度计读数上的应用,研究了直方图均衡化处理,并根据OTSU原理,把温度计图像进行分割,采用Canny算子提取温度计边缘,并根据Hough变换得到温度计刻度线和液柱,最后给出了与人工读数对比的实验结果及结论。 相似文献
19.
20.
The application of magnetostriction in the design of a hybrid, electromechanical/hydraulic high-performance linear (large force and stroke) and/or rotational (large moment and angle) actuator is considered. The design concept combines the high power density of actuation possible with magnetostriction (approaching 0.1 HP/cm3 of the magnetostrictive material assuming 3 kHz excitation frequency) and the design flexibility of hydraulics. The objective of the research described was to validate the concept theoretically and to study alternatives and improvements. The system, as currently envisioned, offers very small packaging volume (approximately an order of magnitude smaller than conventional electromechanical systems), flexible packaging (relative location of the major system components is not critical), and easy control (precise control of actuation speed, quick reverse time, and inherent position lockup). The major technical problems associated with the design are outlined, and results of a computer simulation of a prototype actuator are presented 相似文献