A method for automatic detection of equatorial spread-F in ionograms

A method is presented for automatic detection of spread-F. The method is based on an image recognition technique and is applied to ionograms recorded at the ionospheric station of Tucumán (26.9°S, 294.6°E). The performance achieved is statistically evaluated and demonstrated with significant examples. The proposed method improves Autoscala's ability to reject ionograms with insufficient information, including those featuring Spread-F. Automatic identification of cases of spread-F is of additional interest in Space Weather applications, when it helps detect degraded radio propagation conditions.The present data analysis is a retrospective study but forms the basis for real-time application as an extension of Autoscala’s capabilities.     

Electron density profile calculation technique for Autoscala ionogram analysis

An electron density profile model with free parameters is introduced. Initially the parameters are calculated on the basis of the ionospheric characteristics automatically obtained from the ionograms by Autoscala and considering the helio-geophysical conditions. The technique used to adjust the free parameters to the particular ionograms recorded is presented.     

A new design of low-power portable digital ionosonde

The Ionospheric Laboratory of Wuhan University is interested in upgrading its instrumentation replacing the WIOBSS (Wuhan Ionospheric Oblique Backscattering Sounding System) with a more flexible and automatic ionosonde. Then the updated ionosonde WMI (Wuhan Multifunctional Ionosonde) with automatic ionogram scaling has been developed to satisfy future research. The new system not only inherited some classic techniques from WIOBSS, such as the pulse compression and the coherent integration techniques, but also made great improvements in hardware design and software updating. This paper mainly introduces evolutions of this new ionosonde in both digital transceiver and digital signal processing domain, and also presents some observations.     

Time and spatial variations of the foF2(night)/foF2(day) values

The ratio of daytime and nighttime values of the foF2 critical frequency is analyzed on the basis of the data of 35 ionospheric stations of the eastern hemisphere and 7 stations of the western hemisphere. The analysis confirms the results of Danilov [Danilov, A.D. Variations in the ratio of nighttime and daytime critical frequencies of the F2 layer. Geomagn. Aeronomy, 47 (6), 551–561 (in Russian) 2007; Danilov, A.D. Time and spatial variations in the ratio of nighttime and daytime critical frequencies of the F2 layer, J. Atmos. Sol-Terr. Phys. 70, 1201–1212, 2008.] that after about 1980, a systematic behavior of this ratio with time is observed: an increase with time (a positive trend) or a decrease with time (a negative trend). The sign of this trend is shown to be governed by the signs of the magnetic declination D and magnetic inclination I at the given ionospheric station. This fact makes it possible to assume that the above indicated trend is caused by long-term variations in the zonal component V_ny of the horizontal wind in the thermosphere, the latter component contributing into the vertical drift velocity W.     

A new method for improving the performance of an ionospheric model developed by multi-instrument measurements based on artificial neural network

There are remarkable ionospheric discrepancies between space-borne (COSMIC) measurements and ground-based (ionosonde) observations, the discrepancies could decrease the accuracies of the ionospheric model developed by multi-source data seriously. To reduce the discrepancies between two observational systems, the peak frequency (foF2) and peak height (hmF2) derived from the COSMIC and ionosonde data are used to develop the ionospheric models by an artificial neural network (ANN) method, respectively. The averaged root-mean-square errors (RMSEs) of COSPF (COSMIC peak frequency model), COSPH (COSMIC peak height model), IONOPF (Ionosonde peak frequency model) and IONOPH (Ionosonde peak height model) are 0.58 MHz, 19.59 km, 0.92 MHz and 23.40 km, respectively. The results indicate that the discrepancies between these models are dependent on universal time, geographic latitude and seasons. The peak frequencies measured by COSMIC are generally larger than ionosonde’s observations in the nighttime or middle-latitudes with the amplitude of lower than 25%, while the averaged peak height derived from COSMIC is smaller than ionosonde’s data in the polar regions. The differences between ANN-based maps and references show that the discrepancies between two ionospheric detecting techniques are proportional to the intensity of solar radiation. Besides, a new method based on the ANN technique is proposed to reduce the discrepancies for improving ionospheric models developed by multiple measurements, the results indicate that the RMSEs of ANN models optimized by the method are 14–25% lower than the models without the application of the method. Furthermore, the ionospheric model built by the multiple measurements with the application of the method is more powerful in capturing the ionospheric dynamic physics features, such as equatorial ionization, Weddell Sea, mid-latitude summer nighttime and winter anomalies. In conclusion, the new method is significant in improving the accuracy and physical characteristics of an ionospheric model based on multi-source observations.     

Options for mapping foF2

Available long-term and near-real time global and regional maps of foF2 are examined in relation to telecommunication and aeronomy requirements and recommendations are made for the best present-day maps to adopt. In particular, it is shown that current CCIR maps do not meet all requirements and should not necessarily be regarded as standards against which other mappings should be compared.     

宽带固态噪声源自动校准系统

主要介绍宽带固态噪声源自动校准系统ＨＰ８５１２０Ａ的用途、系统组成，主要技术指标和基本工作原理。所编制的各种系统运算软件，适合固态源和气体放电管噪声源的校准运用。给出了校准系统的误差分析。     

Symmetry and asymmetry of ionospheric weather at magnetic conjugate points for two midlatitude observatories

Variations of the ionospheric weather W-index for two midlatitude observatories, namely, Grahamstown and Hermanus, and their conjugate counterpart locations in Africa are studied for a period from October 2010 to December 2011. The observatories are located in the longitude sector, which has consistent magnetic equator and geographic equator so that geomagnetic latitudes of the line of force are very close to the corresponding geographic latitudes providing opportunity to ignore the impact of the difference of the gravitational field and the geomagnetic field at the conjugate points on the ionosphere structure and dynamics. The ionosondes of Grahamstown and Hermanus provide data of the critical frequency (foF2), and Global Ionospheric Maps (GIM) provide the total electron content (TECgps) along the magnetic field line up to the conjugate point in the opposite hemisphere. The global model of the ionosphere, International Reference Ionosphere, extended to the plasmasphere altitude of 20,200 km (IRI-Plas) is used to deliver the F2 layer peak parameters from TECgps at the magnetic conjugate area. The evidence is obtained that the electron gas heated by day and cooled by night at the summer hemisphere as compared with the opposite features in the conjugate winter hemisphere testifies on a reversal of plasma fluxes along the magnetic field line by the solar terminator. The ionospheric weather W-index is derived from NmF2 (related with foF2) and TECgps data. It is found that symmetry of W-index behavior in the magnetic conjugate hemispheres is dominant for the equinoxes when plasma movement along the magnetic line of force is imposed on symmetrical background electron density and electron content. Asymmetry of the ionospheric storm effects is observed for solstices when the plasma diffuse down more slowly into the colder winter hemisphere than into the warmer summer hemisphere inducing either plasma increase (positive phase) or decrease (negative phase of W-index) in the ionospheric and plasmaspheric plasma density.     

An annual variation analysis of the ionospheric spatial gradient over a regional area for GNSS applications

An ionospheric spatial gradient represents the ionosphere delay difference between different locations, and its variation over a specific area is important for implementing differential GNSS systems. An estimation method for the ionospheric spatial gradient over a small regional area is proposed. A plate map model is implemented for the direct estimation of the gradients. Nine years of GPS data were processed to figure out the annual variation of the mean gradient at the mid-geomagnetic latitude of 30° N. Gradients along the north–south direction have a mean of 0.65 mm/km and follow solar-cycle variations.     

G2膜片质量监控仪的研制

介绍一种ＧＺ膜片质量在线测量系统。Ｇ２膜片是彩色电视机上的一个关键零件，在膜片上面有三个圆台平面，实测其平行度误差小于８μｍ。这个系统采用非接触传感器和ＰＣ１５００／小型计算机进行自动测量与控制，测量误差为±１μｍ，测量范围为（０～６０）μｍ。     

Variation in the ionospheric propagating factor M(3000)F2 at Ouagadougou,Burkina Faso

We use hourly monthly median values of propagation factor M(3000)F2 data observed at Ouagadougou Ionospheric Observatory (geographic12.4°N, 1.5°W; 5.9^o dip), Burkina Faso (West Africa) during the years Januar1987–December1988 (average F10.7 < 130 × 10⁻²² W/m²/Hz, representative of low solar flux conditions) and for January 1989–December1990 (average F10.7 ? 130 × 10⁻²² W/m²/Hz, representative of high solar epoch) for magnetically quiet conditions to describe local time, seasonal and solar cycle variations of equatorial ionospheric propagation factor M(3000)F2 in the African region. We show that that seasonal trend between solar maximum and solar minimum curves display simple patterns for all seasons and exhibits reasonable disparity with root mean square error (RMSE) of about 0.31, 0.29 and 0.26 for December solstice, June solstice and equinox, respectively. Variability Σ defined by the percentage ratio of the absolute standard deviation to the mean indicates significant dissimilarity for the two solar flux levels. Solar maximum day (10–14 LT) and night (22–02 LT) values show considerable variations than the solar minimum day and night values. We compare our observations with those of the IRI 2007 to validate the prediction capacity of the empirical model. We find that the IRI model tends to underestimate and overestimate the observed values of M(3000)F2, in particular, during June solstice season. There are large discrepancies, mainly during high solar flux equinox and December solstice between dawn and local midnight. On the other hand, IRI provides a slightly better predictions for M(3000)F2 between 0900 and 1500 LT during equinox low and high solar activity and equinox high sunspot number. Our data are of great importance in the area of short-wave telecommunication and ionospheric modeling.     

An improved approach to model ionospheric delays for single-frequency Precise Point Positioning

PPP with low-cost, single-frequency receivers has been receiving increasing interest in recent years because of its large amount of possible users. One crucial issue in single-frequency PPP is the mitigation of ionospheric delays which cannot be removed by combining observations on different frequencies. For this purpose, several approaches have been developed, such as, the approach using ionospheric model corrections with proper weight, the GRAPHIC (Group and Phase Ionosphere Calibration) approach, and the method to model ionospheric delays over a station with a low polynomial or stochastic process. From our investigation on the stochastic characteristics of the ionospheric delay over a station, it cannot be precisely represented by either a deterministic model in the form of a low-order polynomial or a stochastic process for each satellite, because of its strong irregular spatial and temporal variations. Therefore, a novel approach is developed accordingly in which the deterministic representation is further refined by a stochastic process for each satellite with an empirical model for its power density. Furthermore, ionospheric delay corrections from a constructed model using GNSS data are also included as pseudo-observations for a better solution. A large data set collected from about 200 IGS stations over one month in 2010 is processed with the new approach and several commonly adopted approaches for validation. The results show its significant improvements in terms of positioning accuracy and convergence time with a negligible extra processing time, which is also demonstrated by data collected with a low-cost, handheld, single-frequency receiver.     

Josephson阵列电压标准及对标准电池的自动化检定

叙述了引进的１Ｖ／１０Ｖ超导Ｊｏｓｅｐｈｓｏｎ阵列电压标准的工作原理，系统组成及性能特征。在进行了大量测量、比对实验的基础上，对系统的不确定度进行了计算分析并与实时分析进行了比较，且得到验证。为了进一步减小复现１Ｖ电压单位的不确定度，提高１Ｖ量传的自动化程度，我们研制了高稳定性电压传递标准和低热电势程控开关，编制了相应的运行软件，对本系统作了必要改进。改进后，不仅实现了阵列标准对标准电池电动势的自动化测量，而且使复现１Ｖ电压单位的不确定度小于１ｘ１０￣（－８），平均值的标准偏差小于６ｘ１０￣（－９）。     

Science rational for MIERS/IRI collaboration

In this paper, we will shortly highlight some of the aspects that COST Action 296 on Mitigation of Ionospheric Effects on Radio Systems (MIERS) and International Reference Ionosphere (IRI) have in common in an attempt to define science rationale for collaboration between these two international projects.     

The accuracy of data from ionosondes for the estimation of hmF2 and the identification of global change in the ionosphere

A long temporal series of simulated ionograms was generated with a superimposed secular variation of −14 km/century on the h_mF2 parameter. These ionograms were interpreted by the automatic scaling program Autoscala. By applying four different empirical formulas, four artificial series of h_mF2 were generated and then processed with the same methods used by other authors for real data sets. Data analysis of the simulated ionograms revealed the artificially imposed long-term trend. These results lead to the conclusion, that regardless of the empirical formula used, the accuracy of h_mF2 from ionosonde measurements would be adequate to observe a long-term trend of −14 km/century.     

Monthly mean foF2 model for an African low-latitude station and comparison with IRI

We have employed the hourly values of the ionospheric F-region critical frequency (foF2) obtained from Ouagadougou ionosonde, Burkina Faso (geographic coordinates 12° N, 1.8° W) during the interval of 1985–1995 (solar cycle 22) and solar radio flux of 10 cm wavelength (F10.7) to develop a local model (LM) for the African low-latitude station. The model was developed from regression analysis method, using the two-segmented regression analysis. We validated LM with foF2 data from Korhogo observatory, Cote d’Ivorie (geographical coordinates 9.3° N, 5.4° W). LM as well as the International Reference Ionosphere (IRI) agrees well with observations. LM gave some improvement on the IRI-predicted foF2 values at the sunrise (06 LT) at all solar flux levels and in all seasons except June solstice. The performance of the models at the representing the salient features of the equatorial foF2 was presented. Considering daytime and nighttime performances, LM and IRI are comparable in low solar activity (LSA), LM performed better than IRI in moderate solar activity (MSA), while IRI performed better than LM in high solar activity (HSA). CCIR has a root mean square error (r.m.s.e), which is only 0.10 MHz lower than that of LM while LM has r.m.s.e, which is about 0.05 MHz lower than that of URSI. In general, our result shows that performance of IRI, especially the CCIR option of the IRI, is quite comparable with the LM. The improved performance of IRI is a reflection of the numerous contributions of ionospheric physicists in the African region, larger volume of data for the IRI and the diversity of data sources, as well as the successes of the IRI task force activities.     

短期频率稳定度自动测量装置

本文介绍了授率稳定度的表征,研制的一台频率短期稳定度测量装置和一个测时精度为0.1ns的时间间隔计数器,它可实现短稳时域阿伦方差无间隙采样。通过IEEE—488接口总线实现了对频综的多点连续和对振荡器的跟踪自动测量。本装置频率稳定度测量范围为0.2～500MHz,(并可扩展到10GHZ)。自校准σ_y(τ)=5E一6/τ.S_φ(0.1Hz)=-135dB/Hz,S_φ(1Hz)=—138dB/Hz,S_φ(10Hz)=-140dB/Hz,S_φ(100Hz)=-150dB/Hz。本装置经多次实测实验,性能可靠,测量数据可信。     

超低频计量自动测试系统

充分利用现有的标准仪器,在微机统一控制下,组成一个超低频参数计量的自动测试系统。系统中各台仪器仍保持其独立工作能力。整个计量测试过程,都用软件控制,自动完成,并能对数据自动采集和处理,用汉字打印输出检测结果。     

校准实验室质量体系综合评判方法

采用模糊集合理论来处理校准实验室质量体系的综合评判问题.描述了建立模糊评价模型的方法,并给出了实际的应用计算.