The morphology of the Martian surface

Most of the southern hemisphere of Mars is densely cratered and stands 1–3 km above the topographic datum. The northern hemisphere is more sparsely cratered and elevations are generally below the datum. A broad rise, the Tharsis bulge, centered at 14° S, 101° W, is 8000 km across and 10 km above the datum at its summit. The densely cratered terrain has two main components; very ancient crust, nearly saturated with large craters, and younger intercrater plains. In many areas the older unit is fractured and extensively dissected by small channels. The younger intercrater plains are distinctly layered in places and less dissected, less fractured, and less cratered. Both units probably date from very early in the planet's history. Cratered plains cover much of the northern hemisphere and are highly variegated. Those around the large volcanoes are covered with numerous volcanic flows whereas in other areas the plains are featureless except for craters and lunar mare-like ridges. Between 40° N and 60° N the plains are complex with various kinds of striped and patterned ground, low escarpments, and isolated irregularly shaped mesas. Their peculiar morphology has been attributed, in part, to the repeated deposition and removal of volatile-rich debris layers. Along the boundary between the northern plains and the densely cratered terrain to the south, the plains and cratered terrain complexly inter-finger. The old terrain forms the high ground and appears to have undergone mass wasting on a large scale. In several areas, particularly south of Chryse Planitia, the old, cratered surface has collapsed to form chaotic terrain. Large channels, tens of kilometers wide and hundreds of kilometers long, with numerous characteristics suggestive of catastrophic flooding, commonly emerge from the chaotic areas. Much of the area between 50° W and 180° W and 50° N and 50° S is cut by fractures radial to the center of the Tharsis bulge. The equatorial canyon system, Valles Marineris, is radial to the bulge and appears to have formed largely by faulting along the radial fractures, although it has also been extensively modified by various mass wasting and fluvial processes. Most but not all volcanoes are in the Tharsis and Elysium regions. The largest resemble terrestrial shield volcanoes except for scale; the edifices, flow features and calderas are all far larger than their terrestrial counterparts. Most impact craters on Mars are surrounded by layers of ejecta, each with a distil ridge. This unique morphology coupled with other surface characteristics suggests large amounts of ground ice. Layered deposits at both poles appear to be relatively young, volatile-rich, aeolian deposits. The north pole is also surrounded by a continuous belt of dunes several tens of kilometers across. In most other places, aeolian modification of the surface at a scale of several tens of meters appears slight despite annual global dust storms.     

Near Surface Stratigraphy and Regolith Production in Southwestern Elysium Planitia,Mars: Implications for Hesperian-Amazonian Terrains and the InSight Lander Mission

The presence of rocks in the ejecta of craters at the InSight landing site in southwestern Elysium Planitia indicates a strong, rock-producing unit at depth. A finer regolith above is inferred by the lack of rocks in the ejecta of 10-m-scale craters. This regolith should be penetrable by the mole of the Heat Flow and Physical Properties Package (HP³). An analysis of the size-frequency distribution (SFD) of 7988 rocky ejecta craters (RECs) across four candidate landing ellipses reveals that all craters >200 m in diameter and \({<}750 \pm 30\ \mbox{Ma}\) in age have boulder-sized rocks in their ejecta. The frequency of RECs however decreases significantly below this diameter (\(D\)), represented by a roll-off in the SFD slope. At \(30\ \text{m} < D < 200\ \text{m}\), the slope of the cumulative SFD declines to near zero at \(D < 30\ \text{m}\). Surface modification, resolution limits, or human counting error cannot account for the magnitude of this roll-off. Rather, a significant population of <200 m diameter fresh non-rocky ejecta craters (NRECs) here indicates the presence of a relatively fine-grained regolith that prevents smaller craters from excavating the strong rock-producing unit. Depth to excavation relationships and the REC size thresholds indicate the region is capped by a regolith that is almost everywhere 3 m thick but may be as thick as 12 to 18 m. The lower bound of the thickness range is independently confirmed by the depth to the inner crater in concentric or nested craters. The data indicate that 85% of the InSight landing region is covered by a regolith that is at least 3 m thick. The probability of encountering rockier material at depths >3 m by the HP³ however increases significantly due to the increase in boulder-size rocks in the lower regolith column, near the interface of the bedrock.     

The Composition of Cosmic Rays and the Mixing of the Interstellar Medium

The differences between the composition of Galactic cosmic rays and that of the interstellar medium are manifold, and they contain a wealth of information about the varying processes that created them. These differences reveal much about the initial mixing of freshly synthesized matter, the chemistry and differentiation of the interstellar medium, and the mechanisms and environment of ion injection and acceleration. Here we briefly explore these processes and show how they combine to create the peculiar, but potentially universal, composition of the cosmic rays and how measurements of the composition can provide a unique measure of the mixing ratio of the fresh supernova ejecta and the old interstellar medium in this initial phase of interstellar mixing. In particular, we show that the major abundance differences between the cosmic rays and the average interstellar medium can all result from cosmic ray ion injection by sputtering and scattering from fast refractory oxide grains in a mix of fresh supernova ejecta and old interstellar material. Since the bulk of the Galactic supernovae occur in the cores of superbubbles, the bulk of the cosmic rays are accelerated there out of such a mix. We show that the major abundance differences all imply a mixing ratio of the total masses of fresh supernova ejecta and old interstellar material in such cores is roughly 1 to 4. That means that the metallicity of ∼3 times solar, since the ejecta has a metallicity of ∼8 times that of the present interstellar medium.     

火控雷达在有源干扰环境中的作用距离评估

火控雷达在有源干扰环境中的作用距离直接关系到武器系统在电磁干扰环境中的实战效能和生存能力,因此提高火控雷达在有源干扰环境中的探测距离是雷达技术发展的最主要内容。文中分析了干扰环境里火控雷达的接收特性,探讨了火控雷达在有源噪声干扰环境中的作用距离模型,并根据模型绘制出了在自卫干扰和支援干扰情况下的火控雷达作用距离曲线,最后得出改进雷达抗干扰参数的几点结论。     

Observations of Variability in Cosmic Rays

Cosmic rays are the main source of ionization in the atmosphere at altitudes below 55–60km. This circumstance, together with the fact that cosmic ray flux modulation closely mirrors the solar activity time history, makes cosmic rays a good candidate as a possible mediator in the solar variability – climate relationship. The observed cosmic ray flux variations are described with the aim of emphasizing the features which may be useful in the search of correlation between cosmic rays and atmospheric phenomena.     

行星表面陨石坑检测与匹配方法

 针对深空探测器光学导航技术的需要,提出了行星表面陨石坑导航路标的提取与匹配方法。陨石坑是行星表面最显著的地形特征,在光照条件下,陨石坑具有清晰的几何轮廓。结合光照方向,通过陨石坑边缘的检测、边缘配对以及形状参数拟合等处理实现陨石坑的提取。对检测出的陨石坑,基于平面二次曲线的几何不变特性,采用投票策略实现与陨石坑数据库的匹配,并设计陨石坑误匹配及失配的校正策略,从而有效地确定陨石坑在目标天体表面的全局位置。最后通过嫦娥一号获得的目表图像验证了所提方法的有效性和可行性。     

A Rader Clutter Model: Average Scattering Coefficients of Land, Snow, and Ice

A model has been developed for average radar backscatter from terrain based on recent carefully controlled wide-bandwidth measurements of vegetation, snow-covered ground, and sea ice and on a comparison with measurements over North America by the Skylab S-193 scatterometer. The models for the thiree cases take the form ?° dB = A + B? + Cf+ Df?, 20° ? angle of incidence ? 70°, where the constants vary depending on polarization and terrain class. They also differ above and below a critical frequency (6 GHz for general terrain, 8 GHz for sea ice, and between 8 and 12 GHz for snow). For angles of incidence of 0° (vertical) and 10°, the model is of the form ?° dB = M(?) + N(?)f over the range 1 to 18 GHz. Hundreds of thousands of measurements contributed to the general (vegetated terrain) model, and smaller numbers contributed to the snow and sea ice models. Since 1974 all measurements have been made with University of Kansas microwave spectrometers. A brief discussion of fading shows that insufficient data are available to describe the ranges adequately.     

An Overview of the Lunar Crater Observation and Sensing Satellite (LCROSS)

The Lunar Crater Observation Sensing Satellite (LCROSS), an accompanying payload to the Lunar Reconnaissance Orbiter (LRO) mission (Vondrak et al. 2010), was launched with LRO on 18 June 2009. The principle goal of the LCROSS mission was to shed light on the nature of the materials contained within permanently shadowed lunar craters. These Permanently Shadowed Regions (PSRs) are of considerable interest due to the very low temperatures, <120?K, found within the shadowed regions (Paige et al. 2010a, 2010b) and the possibility of accumulated, cold-trapped volatiles contained therein. Two previous lunar missions, Clementine and Lunar Prospector, have made measurements that indicate the possibility of water ice associated with these PSRs. LCROSS used the spent LRO Earth-lunar transfer rocket stage, an Atlas V Centaur upper stage, as a kinetic impactor, impacting a PSR on 9 October 2009 and throwing ejecta up into sunlight where it was observed. This impactor was guided to its target by a Shepherding Spacecraft (SSC) which also contained a number of instruments that observed the lunar impact. A?campaign of terrestrial ground, Earth orbital and lunar orbital assets were also coordinated to observe the impact and subsequent crater and ejecta blanket. After observing the Centaur impact, the SSC became an impactor itself. The principal measurement goals of the LCROSS mission were to establish the form and concentration of the hydrogen-bearing material observed by Lunar Prospector, characterization of regolith within a PSR (including composition and physical properties), and the characterization of the perturbation to the lunar exosphere caused by the impact itself.     

A far ultraviolet imager for the International Solar-Terrestrial Physics Mission

The aurorae are the result of collisions with the atmosphere of energetic particles that have their origin in the solar wind, and reach the atmosphere after having undergone varying degrees of acceleration and redistribution within the Earth's magnetosphere. The global scale phenomenon represented by the aurorae therefore contains considerable information concerning the solar-terrestrial connection. For example, by correctly measuring specific auroral emissions, and with the aid of comprehensive models of the region, we can infer the total energy flux entering the atmosphere and the average energy of the particles causing these emissions. Furthermore, from these auroral emissions we can determine the ionospheric conductances that are part of the closing of the magnetospheric currents through the ionosphere, and from these we can in turn obtain the electric potentials and convective patterns that are an essential element to our understanding of the global magnetosphere-ionosphere-thermosphere-mesosphere. Simultaneously acquired images of the auroral oval and polar cap not only yield the temporal and spatial morphology from which we can infer activity indices, but in conjunction with simultaneous measurements made on spacecraft at other locations within the magnetosphere, allow us to map the various parts of the oval back to their source regions in the magnetosphere. This paper describes the Ultraviolet Imager for the Global Geospace Sciences portion of the International Solar-Terrestrial Physics program. The instrument operates in the far ultraviolet (FUV) and is capable of imaging the auroral oval regardless of whether it is sunlit or in darkness. The instrument has an 8° circular field of view and is located on a despun platform which permits simultaneous imaging of the entire oval for at least 9 hours of every 18 hour orbit. The three mirror, unobscured aperture, optical system (f/2.9) provides excellent imaging over this full field of view, yielding a per pixel angular resolution of 0.6 milliradians. Its FUV filters have been designed to allow accurate spectral separation of the features of interest, thus allowing quantitative interpretation of the images to provide the parameters mentioned above. The system has been designed to provide ten orders of magnitude blocking against longer wavelength (primarily visible) scattered sunlight, thus allowing the first imaging of key, spectrally resolved, FUV diagnostic features in the fully sunlit midday aurorae. The intensified-CCD detector has a nominal frame rate of 37 s, and the fast optical system has a noise equivalent signal within one frame of 10R. The instantaneous dynamic range is >1000 and can be positioned within an overall gain range of 10⁴, allowing measurement of both the very weak polar cap emissions and the very bright aurora. The optical surfaces have been designed to be sufficiently smooth to permit this dynamic range to be utilized without the scattering of light from bright features into the weaker features. Finally, the data product can only be as good as the degree to which the instrument performance is characterized and calibrated. In the VUV, calibration of an an imager intended for quantitative studies is a task requiring some pioneering methods, but it is now possible to calibrate such an instrument over its focal plane to an accuracy of ±10%. In summary, very recent advances in optical, filter and detector technology have been exploited to produce an auroral imager to meet the ISTP objectives.     

Spallogenic Light Elements and Cosmic-ray Origin

We discuss the new information that the light elements, particularly Be, have brought to cosmic-ray studies, specifically to the issue of the origin of the seed material of the cosmic rays. The primary nature of the Be evolution strongly suggests that supernova ejecta are the sources of this material. We discuss the superbubble models that emerged as the most likely site for the acceleration of supernova ejecta, and we review the arguments that support the model in which the present epoch cosmic rays have the same origin as those that produce the light elements throughout the evolutionary history of the Galaxy. These arguments include the facts that the bulk of the Galactic supernovae are confined within the interiors of superbubbles, where their ejecta could dominate the metallicity, and that high velocity grains, which condense out of the cooling and expanding ejecta, serve as the injection source for shock acceleration, via sputtering of grain material and scattering of volatile gas atoms. We also review the evolutionary calculations that show that a secondary origin for the evolution of Be as a function of the O abundance is energetically untenable, and unnecessary if cosmic-ray transport is properly taken into account.     

钢球对肥皂靶的撞击试验

为研究投射物对生物体的致伤效应,采用肥皂作为生物体模拟物,开展了Φ3．0mm 的钢球高速（0．96和1．88km/s）及超高速（3．52和4．98km/s）撞击肥皂靶的试验,获得了肥皂靶在钢球撞击下的损伤特征及其破坏规律。结果表明：高速试验条件下,钢球对肥皂靶的损伤主要表现为贯穿效果;超高速试验条件下,钢球撞击肥皂靶形成大尺寸半球形弹坑,其对肥皂靶的损伤表现为2个方面：一是大尺寸弹坑导致的“体积移除”,二是受超高速撞击的强烈冲击波影响,肥皂靶的破坏区域大于弹坑区域。     

OB Associations, Wolf–Rayet Stars, and the Origin of Galactic Cosmic Rays

We have measured the isotopic abundances of neon and a number of other species in the galactic cosmic rays (GCRs) using the Cosmic Ray Isotope Spectrometer (CRIS) aboard the ACE spacecraft. Our data are compared to recent results from two-component (Wolf–Rayet material plus solar-like mixtures) Wolf–Rayet (WR) models. The three largest deviations of galactic cosmic ray isotope ratios from solar-system ratios predicted by these models, ¹²C/¹⁶O, ²²Ne/²⁰Ne, and ⁵⁸Fe/⁵⁶Fe, are very close to those observed. All of the isotopic ratios that we have measured are consistent with a GCR source consisting of ∼20% of WR material mixed with ∼80% material with solar-system composition. Since WR stars are evolutionary products of OB stars, and most OB stars exist in OB associations that form superbubbles, the good agreement of our data with WR models suggests that OB associations within superbubbles are the likely source of at least a substantial fraction of GCRs. In previous work it has been shown that the primary ⁵⁹Ni (which decays only by electron-capture) in GCRs has decayed, indicating a time interval between nucleosynthesis and acceleration of >10⁵ y. It has been suggested that in the OB association environment, ejecta from supernovae might be accelerated by the high velocity WR winds on a time scale that is short compared to the half-life of ⁵⁹Ni. Thus the ⁵⁹Ni might not have time to decay and this would cast doubt upon the OB association origin of cosmic rays. In this paper we suggest a scenario that should allow much of the ⁵⁹Ni to decay in the OB association environment and conclude that the hypothesis of the OB association origin of cosmic rays appears to be viable.     

Deep Impact and the Origin and Evolution of Cometary Nuclei

The Deep Impact mission revealed many properties of comet Tempel 1, a typical comet from the Jupiter family in so far as any comet can be considered typical. In addition to the properties revealed by the impact itself, numerous properties were also discovered from observations prior to the impact just because they were the types of observations that had never been made before. The impact showed that the cometary nucleus was very weak at scales from the impactor diameter (～1 m) to the crater diameter (～100 m) and suggested that the strength was low at much smaller scales as well. The impact also showed that the cometary nucleus is extremely porous and that the ice was close to the surface but below a devolatilized layer with thickness of order the impactor diameter. The ambient observations showed a huge range of topography, implying ubiquitous layering on many spatial scales, frequent (more than once a week) natural outbursts, many of them correlated with rotational phase, a nuclear surface with many features that are best interpreted as impact craters, and clear chemical heterogeneity in the outgassing from the nucleus.     

Processes that Promote and Deplete the Exosphere of Mercury

It has been speculated that the composition of the exosphere is related to the composition of Mercury’s crustal materials. If this relationship is true, then inferences regarding the bulk chemistry of the planet might be made from a thorough exospheric study. The most vexing of all unsolved problems is the uncertainty in the source of each component. Historically, it has been believed that H and He come primarily from the solar wind (Goldstein, B.E., et al. in J. Geophys. Res. 86:5485–5499, 1981), Na and K come from volatilized materials partitioned between Mercury’s crust and meteoritic impactors (Hunten, D.M., et al. in Mercury, pp. 562–612, 1988; Morgan, T.H., et al. in Icarus 74:156–170, 1988; Killen, R.M., et al. in Icarus 171:1–19, 2004b). The processes that eject atoms and molecules into the exosphere of Mercury are generally considered to be thermal vaporization, photon-stimulated desorption (PSD), impact vaporization, and ion sputtering. Each of these processes has its own temporal and spatial dependence. The exosphere is strongly influenced by Mercury’s highly elliptical orbit and rapid orbital speed. As a consequence the surface undergoes large fluctuations in temperature and experiences differences of insolation with longitude. Because there is no inclination of the orbital axis, there are regions at extreme northern and southern latitudes that are never exposed to direct sunlight. These cold regions may serve as traps for exospheric constituents or for material that is brought in by exogenic sources such as comets, interplanetary dust, or solar wind, etc. The source rates are dependent not only on temperature and composition of the surface, but also on such factors as porosity, mineralogy, and space weathering. They are not independent of each other. For instance, ion impact may create crystal defects which enhance diffusion of atoms through the grain, and in turn enhance the efficiency of PSD. The impact flux and the size distribution of impactors affects regolith turnover rates (gardening) and the depth dependence of vaporization rates. Gardening serves both as a sink for material and as a source for fresh material. This is extremely important in bounding the rates of the other processes. Space weathering effects, such as the creation of needle-like structures in the regolith, will limit the ejection of atoms by such processes as PSD and ion-sputtering. Therefore, the use of laboratory rates in estimates of exospheric source rates can be helpful but also are often inaccurate if not modified appropriately. Porosity effects may reduce yields by a factor of three (Cassidy, T.A., and Johnson, R.E. in Icarus 176:499–507, 2005). The loss of all atomic species from Mercury’s exosphere other than H and He must be by non-thermal escape. The relative rates of photo-ionization, loss of photo-ions to the solar wind, entrainment of ions in the magnetosphere and direct impact of photo-ions to the surface are an area of active research. These source and loss processes will be discussed in this chapter.     

二级轻气炮发射氘丸的研究进展

核燃料（如氘丸）的添加是维持核反应正常运行的关键技术，在核能发电中占重要地位，目前世界上大的ＴＯＫＭＡＫ装置采用二级轻气炮来进行燃料的添加，本文介绍：１．发射氘丸的特殊二级轻气泡；２．发射氘丸的弹托设计；３．利用炮口射流后效作用的弹托分离技术。利用上述技术得到了目前世界上最高的氘丸发射速度－４ｋｍ／ｓ，氘冰完整，在规定距离内弹托分离位置满足设计要求，发射的重复性极好。     

冰粒超高速撞击蜂窝板的数值模拟研究

随着人类航天活动日益增多,空间碎片环境逐渐恶化,对航天器在轨安全运行造成严重威胁,各国学者开展了空间碎片超高速撞击数值模拟研究。目前的研究中一般采用铝弹丸代替空间碎片,但是还有部分空间碎片的密度接近冰的密度,对于冰粒的超高速撞击研究还很少且不透彻。蜂窝板是构成航天器舱壁的主要结构,对航天器内部设备起到保护作用,有必要开展冰粒超高速撞击时对蜂窝板损伤情况的相关研究工作。本文对冰粒超高速撞击蜂窝板开展数值模拟研究,研究冰粒对蜂窝板的损伤情况。研究结果表明,冰粒在一定条件下能够击穿蜂窝板,大量冰粒碎片和蜂窝板碎片将从蜂窝板背面的孔洞中高速冲出,势必对航天器内部设备造成毁伤;在冰粒动能相差不大的情况下,冰粒尺寸和蜂窝板结构将成为影响冰粒撞击效果的主要因素,直径较大的冰粒对蜂窝板的损伤程度较严重。     

The Geology of Mercury: The View Prior to the MESSENGER Mission

Mariner 10 and Earth-based observations have revealed Mercury, the innermost of the terrestrial planetary bodies, to be an exciting laboratory for the study of Solar System geological processes. Mercury is characterized by a lunar-like surface, a global magnetic field, and an interior dominated by an iron core having a radius at least three-quarters of the radius of the planet. The 45% of the surface imaged by Mariner 10 reveals some distinctive differences from the Moon, however, with major contractional fault scarps and huge expanses of moderate-albedo Cayley-like smooth plains of uncertain origin. Our current image coverage of Mercury is comparable to that of telescopic photographs of the Earth’s Moon prior to the launch of Sputnik in 1957. We have no photographic images of one-half of the surface, the resolution of the images we do have is generally poor (∼1 km), and as with many lunar telescopic photographs, much of the available surface of Mercury is distorted by foreshortening due to viewing geometry, or poorly suited for geological analysis and impact-crater counting for age determinations because of high-Sun illumination conditions. Currently available topographic information is also very limited. Nonetheless, Mercury is a geological laboratory that represents (1) a planet where the presence of a huge iron core may be due to impact stripping of the crust and upper mantle, or alternatively, where formation of a huge core may have resulted in a residual mantle and crust of potentially unusual composition and structure; (2) a planet with an internal chemical and mechanical structure that provides new insights into planetary thermal history and the relative roles of conduction and convection in planetary heat loss; (3) a one-tectonic-plate planet where constraints on major interior processes can be deduced from the geology of the global tectonic system; (4) a planet where volcanic resurfacing may not have played a significant role in planetary history and internally generated volcanic resurfacing may have ceased at ∼3.8 Ga; (5) a planet where impact craters can be used to disentangle the fundamental roles of gravity and mean impactor velocity in determining impact crater morphology and morphometry; (6) an environment where global impact crater counts can test fundamental concepts of the distribution of impactor populations in space and time; (7) an extreme environment in which highly radar-reflective polar deposits, much more extensive than those on the Moon, can be better understood; (8) an extreme environment in which the basic processes of space weathering can be further deduced; and (9) a potential end-member in terrestrial planetary body geological evolution in which the relationships of internal and surface evolution can be clearly assessed from both a tectonic and volcanic point of view. In the half-century since the launch of Sputnik, more than 30 spacecraft have been sent to the Moon, yet only now is a second spacecraft en route to Mercury. The MESSENGER mission will address key questions about the geologic evolution of Mercury; the depth and breadth of the MESSENGER data will permit the confident reconstruction of the geological history and thermal evolution of Mercury using new imaging, topography, chemistry, mineralogy, gravity, magnetic, and environmental data.     

MESSENGER and the Chemistry of Mercury’s Surface

The instrument suite on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft is well suited to address several of Mercury’s outstanding geochemical problems. A combination of data from the Gamma-Ray and Neutron Spectrometer (GRNS) and X-Ray Spectrometer (XRS) instruments will yield the surface abundances of both volatile (K) and refractory (Al, Ca, and Th) elements, which will test the three competing hypotheses for the origin of Mercury’s high bulk metal fraction: aerodynamic drag in the early solar nebula, preferential vaporization of silicates, or giant impact. These same elements, with the addition of Mg, Si, and Fe, will put significant constraints on geochemical processes that have formed the crust and produced any later volcanism. The Neutron Spectrometer sensor on the GRNS instrument will yield estimates of the amount of H in surface materials and may ascertain if the permanently shadowed polar craters have a significant excess of H due to water ice. A comparison of the FeO content of olivine and pyroxene determined by the Mercury Atmospheric and Surface Composition Spectrometer (MASCS) instrument with the total Fe determined through both GRNS and XRS will permit an estimate of the amount of Fe present in other forms, including metal and sulfides.     

10. The surface and interior of venus

Present ideas about the surface and interior of Venus are based on data obtained from (1) Earth-based radio and radar: temperature, rotation, shape, and topography; (2) fly-by and orbiting spacecraft: gravity and magnetic fields; and (3) landers: winds, local structure, gamma radiation. Surface features, including large basins, crater-like depressions, and a linear valley, have been recognized from recent ground-based radar images. Pictures of the surface acquired by the USSR's Venera 9 and 10 show abundant boulders and apparent wind erosion.On the Pioneer Venus 1978 Orbiter mission, the radar mapper experiment will determine surface heights, dielectric constant values and small-scale slope values along the sub-orbital track between 50°S and 75°N. This experiment will also estimate the global shape and provide coarse radar images (40–80 km identification resolution) of part of the surface. Gravity data will be obtained by radio tracking. Maps combining radar altimetry with spacecraft and ground-based images will be made. A fluxgate magnetometer will measure the magnetic fields around Venus.The radar and gravity data will provide clues to the level of crustal differentiation and tectonic activity. The magnetometer will determine the field variations accurately. Data from the combined experiments may constrain the dynamo mechanism; if so, a deeper understanding of both Venus and Earth will be gained.     

Mercury’s Surface Composition and Character as Measured by Ground-Based Observations

Mercury’s surface is thought to be covered with highly space-weathered silicate material. The regolith is composed of material accumulated during the time of planetary formation, and subsequently from comets, meteorites, and the Sun. Ground-based observations indicate a heterogeneous surface composition with SiO₂ content ranging from 39 to 57 wt%. Visible and near-infrared spectra, multi-spectral imaging, and modeling indicate expanses of feldspathic, well-comminuted surface with some smooth regions that are likely to be magmatic in origin with many widely distributed crystalline impact ejecta rays and blocky deposits. Pyroxene spectral signatures have been recorded at four locations. Although highly space weathered, there is little evidence for the conversion of FeO to nanophase metallic iron particles (npFe⁰), or “iron blebs,” as at the Moon. Near- and mid-infrared spectroscopy indicate clino- and ortho-pyroxene are present at different locations. There is some evidence for no- or low-iron alkali basalts and feldspathoids. All evidence, including microwave studies, point to a low iron and low titanium surface. There may be a link between the surface and the exosphere that may be diagnostic of the true crustal composition of Mercury. A structural global dichotomy exists with a huge basin on the side not imaged by Mariner 10. This paper briefly describes the implications for this dichotomy on the magnetic field and the 3 : 2 spin : orbit coupling. All other points made above are detailed here with an account of the observations, the analysis of the observations, and theoretical modeling, where appropriate, that supports the stated conclusions.