Automatic target recognition for hyperspectral imagery using high-order statistics

Due to recent advances in hyperspectral imaging sensors many subtle unknown signal sources that cannot be resolved by multispectral sensors can be now uncovered for target detection, discrimination, and identification. Because the information about such sources is generally not available, automatic target recognition (ATR) presents a great challenge to hyperspectral image analysts. Many approaches developed for ATR are based on second-order statistics in the past years. This paper investigates ATR techniques using high order statistics. For ATR in hyperspectral imagery, most interesting targets usually occur with low probabilities and small population and they generally cannot be described by second-order statistics. Under such circumstances, using high-order statistics to perform target detection have been shown by experiments in this paper to be more effective than using second order statistics. In order to further address a challenging issue in determining the number of signal sources needed to be detected, a recently developed concept of virtual dimensionality (VD) is used to estimate this number. The experiments demonstrate that using high-order statistics-based techniques in conjunction with the VD to perform ATR are indeed very effective     

A new approach to automatic target recognition

The fundamental problems of automatic target recognition (ATR) are discussed. A new approach to ATR is suggested that includes: a new method of scoring ATR performance, a new concept of artificial images, a new method called probing for extracting target signature knowledge from image experts, and suggestions for coping with the problem of insufficient test data and algorithm obsolescence     

Automatic target recognition using enhanced resolution SAR data

Using advanced technology, a new automatic target recognition (ATR) system has been developed that provides significantly improved target recognition performance compared with ATR systems that use conventional synthetic aperture radar (SAR) image-processing techniques. This significant improvement in target recognition performance is achieved by using a new superresolution image-processing technique that enhances SAR image resolution (and image quality) prior to performing target recognition. A computationally efficient two-level implementation of a template-based classifier is used to perform target recognition. The improvement in target recognition performance achieved using superresolution image processing in this new ATR system is quantified     

Superresolution HRR ATR with high definition vector imaging

A new 1-D template-based automatic target recognition (ATR) algorithm is developed and tested on high range resolution (HRR) profiles formed from synthetic aperture radar (SAR) images of targets taken from the Moving and Stationary Target Acquisition and Recognition (MSTAR) data set. In this work, a superresolution technique known as High Definition Vector Imaging (HDVI) is applied to the HRR profiles before the profiles are passed through ATR classification. The new I-D ATR system using HDVI demonstrates significantly improved target recognition compared with previous I-D ATR systems that use conventional image processing techniques. This improvement in target recognition is quantified by improvement in probability of correct classification (PCC). More importantly, the application of HDVI to HRR profiles helps to maintain the same ATR performance with reduced radar resource requirements     

Performance of 10- and 20-target MSE classifiers

MIT Lincoln Laboratory is responsible for developing the ATR (automatic target recognition) system for the DARPA-sponsored SAIP program; the baseline ATR system recognizes 10 GOB (ground order of battle) targets; the enhanced version of SAIP requires the ATR system to recognize 20 GOB targets. This paper presents ATR performance results for 10- and 20-target mean square error (MSE) classifiers using high-resolution SAR (synthetic aperture radar) imagery.     

GMM-based target classification for ground surveillance Doppler radar

An automatic target recognition (ATR) algorithm, based on greedy learning of Gaussian mixture model (GMM) is developed. The GMMs were obtained for a wide range of ground surveillance radar targets such as walking person(s), tracked or wheeled vehicles, animals, and clutter. Maximum-likelihood (ML) and majority-voting decision schemes were applied to these models for target classification. The corresponding classifiers were trained and tested using distinct databases of target echoes, recorded by ground surveillance radar. ML and majority-voting classifiers obtained classification rates of 88% and 96%, correspondingly. Both classifiers outperform trained human operators.     

Image understanding research for automatic target recognition

Automatic target recognition (ATR) is an important capability for defense applications. Many aspects of image understanding (IU) research are traditionally used to solve ATR problems. The authors discuss ATR applications and problems in developing real-world ATR systems and present the status of technology for these systems. They identify several IU problems that need to be resolved in order to enhance the effectiveness of ATR-based weapon systems. They conclude that technological gains in developing robust ATR systems will lead to significant advances in many other areas of applications of image understanding     

Automatic Target Recognition: State of the Art Survey

In this paper a review of the techniques used to solve the automatic target recognition (ATR) problem is given. Emphasis is placed on algorithmic and implementation approaches. ATR algorithms such as target detection, segmentation, feature computation, classification, etc. are evaluated and several new quantitative criteria are presented. Evaluation approaches are discussed and various problems encountered in the evaluation of algorithms are addressed. Strategies used in the data base design are outlined. New techniques such as the use of contextual cues, semantic and structural information, hierarchical reasoning in the classification and incorporation of multisensors in ATR systems are also presented.     

A prospectus for automatic target recognition

Aspects of autorecognition technology are discussed. The following topics are covered: The context and role of automatic target recognition (ATR), sensors and ATR systems, generic shape discrimination, countermeasures, and current capabilities. The authors conclude that the material supports a very favorable assessment of the power and importance of emerging ATR technology     

一种基于高分辨率距离像自动目标识别新方法

提出了一种基于高分辨率距离像的联合对准与识别新方法。该方法结合功率变换的使用，在利用8米雷达目标实测数据进行的识别实验中，获得了较高的正确识别率。     

Automatic target recognition of time critical moving targets using1D high range resolution (HRR) radar

Synthetic Aperture Radar (SAR) imaging and Automatic Target Recognition (ATR) of moving targets pose a significant challenge due to the inherent difficulty of focusing moving targets. As a result, ATR of moving targets has recently received increased interest. High Range Resolution (HRR) radar mode offers an approach for recognizing moving targets by forming focused HRR profiles with significantly enhanced target-to-(clutter+noise) (T/(C+N)) via Doppler filtering and/or clutter cancellation. A goal of HRR ATR transition is the implementation and evaluation of algorithms exhibiting robustness under extended operating conditions (EOC). The public domain Moving and Stationary Target Acquisition and Recognition (MSTAR) data set was used to study 1D template-based ATR development and performance. Due to the unavailability of a statistically significant moving ground target data set, this approach was taken as an interim step in assessing the separability of ground targets when using range only discriminants. This report summarizes the data and algorithm methodology, simulated performance results, and recommendations     

Bayesian gamma mixture model approach to radar target recognition

This paper develops a Bayesian gamma mixture model approach to automatic target recognition (ATR). The specific problem considered is the classification of radar range profiles (RRPs) of military ships. However, the approach developed is relevant to the generic discrimination problem. We model the radar returns (data measurements) from each target as a gamma mixture distribution. Several different motivations for the use of mixture models are put forward, with gamma components being chosen through a physical consideration of radar returns. Bayesian formalism is adopted and we obtain posterior distributions for the parameters of our mixture models. The distributions obtained are too complicated for direct analytical use in a classifier, so Markov chain Monte Carlo (MCMC) techniques are used to provide samples from the distributions. The classification results on the ship data compare favorably with those obtained from two previously published techniques, namely a self-organizing map and a maximum likelihood gamma mixture model classifier.     

Performance complexity study of several approaches to automatictarget recognition from SAR images

A framework which allows for the direct comparison of alternate approaches to automatic target recognition (ATR) from synthetic aperture radar (SAR) images is described and applied to variants of several ATR algorithms. This framework allows comparisons to be made on an even footing while minimizing the impact of implementation details and accounts for variation in image sizes, in angular resolution, and in the sizes of orientation windows used for training. Alternate approaches to ATR are characterized in terms of the best achievable performance as a function of the complexity of the model parameter database. Several approaches to ATR from SAR images are described and the performance achievable by each for a range of database complexities is studied and compared. These approaches are based on a likelihood test under a conditionally Gaussian model, log-magnitude least squared error, and quarter power least squared error. All approaches are evaluated for a wide range of parameterizations and the dependence on these parameters of both the resulting performance and the resulting database complexity is explored. Databases for all of the approaches are trained using identical sets of images and their performance is assessed under identical testing scenarios in terms of probability of correct classification, confusion matrices, and orientation estimation error. The results indicate that the conditionally Gaussian approach outperforms the other two approaches on average for both target recognition and orientation estimation, that accounting for radar power fluctuation improves performance for all three methods, and that the conditionally Gaussian approach normalized for power delivers average performance that is equal or superior to all other considered approaches     

Effects of polarization and resolution on SAR ATR

Lincoln Laboratory is investigating the detection and classification of stationary ground targets using high resolution, fully polarimetric, synthetic aperture radar (SAR) imagery. A study is summarized in which data collected by the Lincoln Laboratory 33 GHz SAR were used to perform a comprehensive comparison of automatic target recognition (ATR) performance for several polarization/resolution combinations. The Lincoln Laboratory baseline ATR algorithm suite was used, and was optimized for each polarization/resolution case. Both the HH polarization alone and the optimal combination of HH, HV, and VV were evaluated; the resolutions evaluated were 1 ft/spl times/1 ft and 1 m/spl times/1 m. The data set used for this study contained approximately 74 km/sup 2/ of clutter (56 km/sup 2/ of mixed clutter plus 18 km/sup 2/ of highly cultural clutter) and 136 tactical target images (divided equally between tanks and howitzers).     

Adaptive boosting for SAR automatic target recognition

The paper proposed a novel automatic target recognition (ATR) system for classification of three types of ground vehicles in the moving and stationary target acquisition and recognition (MSTAR) public release database. First MSTAR image chips are represented as fine and raw feature vectors, where raw features compensate for the target pose estimation error that corrupts fine image features. Then, the chips are classified by using the adaptive boosting (AdaBoost) algorithm with the radial basis function (RBF) network as the base learner. Since the RBF network is a binary classifier, the multiclass problem was decomposed into a set of binary ones through the error-correcting output codes (ECOC) method, specifying a dictionary of code words for the set of three possible classes. AdaBoost combines the classification results of the RBF network for each binary problem into a code word, which is then "decoded" as one of the code words (i.e., ground-vehicle classes) in the specified dictionary. Along with classification, within the AdaBoost framework, we also conduct efficient fusion of the fine and raw image-feature vectors. The results of large-scale experiments demonstrate that our ATR scheme outperforms the state-of-the-art systems reported in the literature     

Efficient ATR using compression

We examine various model-based automatic target recognition (MBATR) classifiers to investigate the utility of model-catalog compression realized via signal-vector quantization (VQ) and feature extraction. We specifically investigate the impact of various compression rates and common automatic target recognition (ATR) scenario variations such as noise and occlusion through simulations on high-range resolution (HRR) radar and synthetic aperture radar (SAR) data. For this data, we show that significant computational savings are possible for modest decreases in classification performance.     

一种提高SAR目标识别率的有效方法

在合成孔径雷达自动目标识别SAR ATR中，SAR像的预处理是提高识别率的关键技术之一。给出了一种简单有效的SAR图像预处理方法，该方法首先对SAR目标像进行对数变换后，再做傅立叶变换。经预处理后的SAR像用支持矢量机SVM分类器进行目标识别。实验结果表明：本方法不但有效地提高了目标识别率，而且保证了目标的平移不变性并具有良好的推广能力。     

Improved SAR target detection via extended fractal features

The utility of the extended fractal (EF) feature is evaluated for the enhancement of the focus of attention (FOA) stage of a synthetic aperture radar (SAR) automatic target recognition (ATR) system. Unlike more traditional SAR detection features that distinguish target pixels from the background only on the basis of contrast, the EF feature is sensitive to both the contrast and size of objects. Furthermore, the structure for the EF feature computational algorithm lends itself to very fast implementation, and it can be shown that the new feature has a CFAR-like (constant false alarm rate) property. We demonstrate the improved performance using the new feature by testing a number of different detection approaches over two databases of SAR imagery     

Support vector machines for SAR automatic target recognition

Algorithms that produce classifiers with large margins, such as support vector machines (SVMs), AdaBoost, etc, are receiving more and more attention in the literature. A real application of SVMs for synthetic aperture radar automatic target recognition (SAR/ATR) is presented and the result is compared with conventional classifiers. The SVMs are tested for classification both in closed and open sets (recognition). Experimental results showed that SVMs outperform conventional classifiers in target classification. Moreover, SVMs with the Gaussian kernels are able to form a local “bounded” decision region around each class that presents better rejection to confusers     

一种基于红外图像的目标自动识别算法

红外成像制导具有在各种复杂战术环境下自主搜索、捕获、识别和跟踪目标的能力,代表了当代红外制导技术的发展趋势。提出了一种红外图像预处理、跟踪、分类的自动目标识别算法,利用小波变换、形态学方法对红外图像进行预处理,提取不同频带的惯性不变矩作为特征量,利用神经网络进行分类识别,结果表明该算法具有很高的识别率,对于精确制导武器的目标识别研究具有一定的参考价值。