多体卫星高稳定度智能控制方案研究

卫星上大型挠性天线的加减速运动会对星体产生较大的扰动,影响了星体姿态的指向精度和稳定度.运用Lyapunov稳定性理论,设计了变结构和神经网络控制器,并在星体前馈中引入扰动补偿力矩,从而保证星体姿态角速度在不确定性干扰下能以指数形式收敛到某一给定的有界范围内,仿真证明了姿态的稳定度满足给定的指标要求.      

Optical sensors for monitoring and control of plant growth systems.

Optical chemical sensors have been developed for monitoring several parameters relevant to plant growth systems. These sensors utilize porous polymer and porous glass as the sensing element, and optical fiber input/output lines connected to a custom optoelectronic interface. Present in the sensing element are immobilized colorimetric indicators, which react with the analyte to be sensed. This reaction results in a change in the optical properties of the sensor. These sensors are particularly suited to in-situ monitoring of nutrient solution parameters and atmospheric trace contaminants in life support and plant growth systems. Sensors for monitoring pH, ammonia, and ethylene will be discussed.     

基于观测器的网络化控制系统的变结构控制

给出了传感器和控制器之间存在网络时网络化控制系统的一种变结构控制方法.由于对象状态的不完全可测性,利用观测器的状态来设计控制器.如果实际时延小于最大允许时延,则观测器增益矩阵可以通过求解一个线性矩阵不等式来求取,从而保证误差系统是指数渐近稳定的.控制器增益矩阵可以利用极点配置或最优控制的方法来确定,并且能够保证滑动模态是指数渐近稳定的.采用指数趋近律的方法,可以调节相应参数削弱抖振,保证系统具有要求的性能.仿真算例表明了该方法的可行性与有效性.     

Optical chemical sensors for environmental control and system management.

Several fiber optic based chemical sensors have been developed for use in plant growth systems and enclosed life support systems. Optical chemical sensors offer several distinct advantages in terms of sensitivity, calibration stability, immunity to biofouling and electrical interference, and ease of multiplexing sensors for multipoint/multiparameter analysis. Also, the ability to locate fiber optic sensors in close proximity to plant roots or leaves should improve the measurement reliability by obviating the need for handling and transport which can compromise sample integrity. Polestar Technologies and GEO-CENTERS have developed and tested many types of optical chemical sensors which utilize novel glass and polymeric materials as the sensor substrate. Analytes are detected using immobilized colorimetric indication systems or molecular recognition elements. Typically transduction is via wavelength specific absorption changes with multiwavelength detection for drift compensation. Sensors have been developed for solution pH, NH3, ethylene, CO2, and dissolved metal ions. In addition, unique PC-compatible optoelectronic interfaces, as well as distributed measurement systems, so that integrated detection systems are now available. In this paper recent efforts to develop sensors for critical nutrient ions are presented.     

带变速控制力矩陀螺的航天器自适应姿态控制

航天器高精度姿态控制容易受到参数误差的影响,自适应控制能够合理地估计参数,使基于模型的控制器设计易于实现。自适应参数分为主星体惯量、变速控制力矩陀螺框架转子惯量及动摩擦系数3组,按参数分组对带变速控制力矩陀螺的航天器详细动力学模型进行变换,采用Lyapunov方法设计出姿态控制器、变速控制力矩陀螺群操纵律及参数自适应更新律,操纵律中引入加权矩阵以缓解陀螺奇异问题。理论分析和数值仿真表明闭环姿态控制系统全局一致最终有界稳定,参数自适应更新能有效减小角速度跟踪误差,使姿态四元数误差收敛更快。参数估计虽然不能准确收敛到其真值上,但均在可接受的范围内。     

飞控系统虚拟设计环境

开展面向设计的飞控系统虚拟原型机开发环境研究,提出了飞控系统虚拟设计环境的3层次结构:第1层为运行管理层,以数据库为基础,其核心为PDM(产品数据管理)软件.第2层为虚拟技术层,提供余度飞控计算机、舵回路、传感器等的虚拟原型的生成.第3层为仿真支持层,支持人在回路的仿真验证.分析了实现每层功能的关键技术,并基于该虚拟设计环境,完成了虚拟四余度飞控计算机的设计和验证,使该开发环境具有面向主要结构参数、性能参数、价格参数的虚拟余度飞控计算机系统生成功能.     

大型柔性空间结构的状态估计及变结构控制

本文研究大型柔性空间结构作单轴大角度操纵时的状态估计及变结构控制方法。所建立指数律的状态观测器,实现了以较少传感器估计系统弹性振动模态的目的。利用状态观测器的状态及系统输出变量反馈方法,设计了大型空间结构的动态输出变结构控制律。针对一个实际模型仿真计算,得到了满意的结果。     

Earth life support for aquatic organisms, system and technical aspects.

The importance of the research on Bioregenerative Life Support has increased dramatically in the last decade not only with regard to possible space flight application but also as a way to obtain a better understanding of our Earth's ecology. A major goal was to reach long-term stability of artificial model systems. Preliminary data are presented on the development of an improved aquatic system, currently dedicated for ground-based research. Closed aquatic ecosystems require reliability of the key parameters of pH, O2 and CO2 concentration and stability of sensors for monitoring. Besides the integration of an artificial lung (holofiber system and air pump with valves, allowing controlled oxygen uptake of air), in parallel to the oxygen producing water plants. Our new approach is to implement opto-chemical sensors, for such environmental monitoring. One major advantage of the new sensor technique is their better long-term reliability as compared to the electrochemical sensors. Our experiment with the new sensor technique has demonstrated satisfactory performance in closed aquatic ecosystems.     

基于区间电流的SRM功率变换器短路故障诊断

功率变换器是开关磁阻电机（SRM）调速系统的核心部件之一,也是系统可靠性最弱的环节。针对传统功率变换器短路故障诊断需增加额外硬件、控制器负担大、诊断范围有限等问题,以非对称半桥式功率变换器为研究对象,在深入分析短路故障模式的基础上,为提取明显的故障特征,对电流传感器进行了重新排布,提出了基于特定转子位置区间内电流的功率变换器故障诊断方法。在某相单独励磁区间内,通过另外两相电流传感器输出值之差与前一相输出值的比值,即可快速定位故障器件。所提方法不受电机相数和控制方式限制,控制器负担小,且无需增加额外硬件。仿真和实验验证了方法的有效性。      

压电网络板的振动控制原理与控制效果

在给出压电网络板机电耦合动力学方程的基础上对其进行求解,将压电网络板的响应表示为子模态压电系统响应的线性组合.通过分析压电网络板在脉冲激励下子模态压电系统的响应行为,揭示压电网络板可以通过两种途径控制自身振动.基于对传递函数的分析进一步得到子模态压电系统的最优电学参数;在此基础上研究了针对某一阶子模态压电系统设计最优电学参数时,各阶子模态压电系统的响应行为以及压电网络板的多模态控制效果.研究结果表明,压电网络板具有多模态控制效果,特别地,当对板的某一阶次的振动控制具有较高要求时,通过对最优电学参数进行设计,电感电阻并联型压电网络板可满足要求.     

Autopoiesis and the origin of bacteria.

"Autopoiesis" is the explanatory principle for the organization of living systems, a concept directly applicable to the problematic issues surrounding the origins of life. Because it provides criteria by which a system may be judged as living, autopoiesis can be used to characterize a minimal living system. Once these defining characteristics have been established, we can extrapolate the conditions which would have made possible the emergence of earliest life. Because autopoiesis is a principle of organization, it provides a definition of living systems not restricted to specific molecules or structures--that is, to those nucleic-acid/protein/lipid cellular life forms with which we are familiar. Autopoiesis provides the conceptual and systematic framework within which any living system may be identified. In examining living systems, then, autopoiesis gives us a literally "meta-physical" view of life.     

Biomass Production System (BPS) plant growth unit.

The Biomass Production System (BPS) was developed under the Small Business Innovative Research (SBIR) program to meet science, biotechnology and commercial plant growth needs in the Space Station era. The BPS is equivalent in size to a double middeck locker, but uses its own custom enclosure with a slide out structure to which internal components mount. The BPS contains four internal growth chambers, each with a growing volume of more than 4 liters. Each of the growth chambers has active nutrient delivery, and independent control of temperature, humidity, lighting, and CO2 set-points. Temperature control is achieved using a thermoelectric heat exchanger system. Humidity control is achieved using a heat exchanger with a porous interface which can both humidify and dehumidify. The control software utilizes fuzzy logic for nonlinear, coupled temperature and humidity control. The fluorescent lighting system can be dimmed to provide a range of light levels. CO2 levels are controlled by injecting pure CO2 to the system based on input from an infrared gas analyzer. The unit currently does not scrub CO2, but has been designed to accept scrubber cartridges. In addition to providing environmental control, a number of features are included to facilitate science. The BPS chambers are sealed to allow CO2 and water vapor exchange measurements. The plant chambers can be removed to allow manipulation or sampling of specimens, and each chamber has gas/fluid sample ports. A video camera is provided for each chamber, and frame-grabs and complete environmental data for all science and hardware system sensors are stored on an internal hard drive. Data files can also be transferred to 3.5-inch disks using the front panel disk drive.     

INS辅助的GPS接收机跟踪环结构和性能分析

分析了GPS/INS的不同组合方式,研究了GPS接收机跟踪环的结构,给出了多普勒频移和时钟误差频率的外部估计方法,提出了一种使用低成本惯性器件信息辅助GPS接收机跟踪环的深组合(deepintegration)结构,建立了这种结构的前馈模型,并对其进行了仿真分析。仿真结果表明,这种结构可以使得接收机具有较宽的跟踪带宽和较好的抑制噪声能力,能显著提高GPS接收机的性能。     

Canadian advanced life support capacities and future directions

Canada began research on space-relevant biological life support systems in the early 1990s. Since that time Canadian capabilities have grown tremendously, placing Canada among the emerging leaders in biological life support systems. The rapid growth of Canadian expertise has been the result of several factors including a large and technically sophisticated greenhouse sector which successfully operates under challenging climatic conditions, well planned technology transfer strategies between the academic and industrial sectors, and a strong emphasis on international research collaborations. Recent activities such as Canada’s contribution of the Higher Plant Compartment of the European Space Agency’s MELiSSA Pilot Plant and the remote operation of the Arthur Clarke Mars Greenhouse in the Canadian High Arctic continue to demonstrate Canadian capabilities with direct applicability to advanced life support systems. There is also a significant latent potential within Canadian institutions and organizations with respect to directly applicable advanced life support technologies. These directly applicable research interests include such areas as horticultural management strategies (for candidate crops), growth media, food processing, water management, atmosphere management, energy management, waste management, imaging, environment sensors, thermal control, lighting systems, robotics, command and data handling, communications systems, structures, in-situ resource utilization, space analogues and mission operations. With this background and in collaboration with the Canadian aerospace industry sector, a roadmap for future life support contributions is presented here. This roadmap targets an objective of at least 50% food closure by 2050 (providing greater closure in oxygen, water recycling and carbon dioxide uptake). The Canadian advanced life support community has chosen to focus on lunar surface infrastructure and not low Earth orbit or transit systems (i.e. microgravity applications). To advance the technical readiness for the proposed lunar missions, including a lunar plant growth lander, lunar “salad machine” (i.e. small scale plant production unit) and a full scale lunar plant production system, a suite of terrestrial developments and analogue systems are proposed. As has been successfully demonstrated by past Canadian advanced life support activities, terrestrial technology transfer and the development of highly qualified personnel will serve as key outputs for Canadian advanced life support system research programs. This approach is designed to serve the Canadian greenhouse industry by developing compliance measures for mitigating environmental impact, reducing labour and energy costs as well as improving Canadian food security, safety and benefit northern/remote communities.     

基于双观测器的卫星姿控系统敏感器故障隔离

卫星的姿态测量部件通常包括光学敏感器和惯性敏感器,这两类敏感器的故障隔离是卫星闭环姿控系统故障诊断的难点之一。利用双观测器方法实现两类敏感器的故障隔离,由卫星姿态运动学方程可知,这两类敏感器的输出存在解析冗余,可建立一个"虚拟"系统。对这个系统设计两个不同的观测器,其中一个是Kalman滤波器,能检测两类敏感器的故障;另一个是隔离观测器,能检测光学敏感器的故障,通过比较这两个观测器的输出残差,达到故障隔离的目的。将该方法应用于包含太阳敏感器、红外地球敏感器和陀螺的卫星姿控系统的故障诊断,数学仿真结果验证了这种方法的有效性。     

Current concepts and future directions of CELSS.

Studies of bioregenerative life support systems for use in space indicate that they are scientifically feasible. Preliminary data suggest that they would provide cost- and weight-saving benefits for low Earth orbit, long duration space platforms. Concepts of such systems include the use of higher plants and/or micro-algae as sources of food, potable water and oxygen, and as sinks for carbon dioxide and metabolic wastes. Recycling of materials within the system will require processing of food organism and crew wastes using microbiological and/or physical chemical techniques. The dynamics of material flow within the system will require monitoring, control, stabilization and maintenance imposed by computers. Future phases of study will continue investigations of higher plant and algal physiology, environmental responses, and control; flight experiments for testing responses of organisms to weightlessness and increased radiation levels; and development of ground-based facilities for the study of recycling within a bioregenerative life support system.     

空舰导弹纯方位攻击目标指示优化方法

纯方位攻击是中远程空舰导弹适应复杂电磁环境下作战的有效途径,但由于目标距离信息缺失,其目标指示和火控解算问题难以解决.在分析机载传感器方位角量化误差的基础上,提出了基于机载传感器方位角速度测量的目标参数优化估计方法,对优化前后的误差进行了分析和对比;从机载无源雷达和全向告警器两个途径分析了所提出优化方法的定位精度分布情况.仿真结果表明:该方法的定位误差受目标方位与机载传感器量化误差的共同影响,存在误差发散区域.在此基础上,提出纯方位攻击条件下载机机动优化的策略是对目标定位误差发散区域进行规避,并尽可能远离该区域.     

压电自适应桁架结构主动控制模型及实验

为提高结构对外部环境的抗干扰能力,构造了压电柔性自适应桁架结构,并对其主动控制进行了研究.由传感器、作动器与柔性梁组成压电自适应桁架结构.基于自适应结构的机电耦合理论,在测量位移的情况下,采用改进的二次积分力反馈控制方法研究了空间压电柔性自适应桁架结构的振动主动控制问题.建立了压电柔性自适应桁架结构主动控制实验系统,并对这类自适应结构进行了实时计算机振动主动控制实验研究.实验研究表明柔性自适应桁架结构能够改善结构的动力学特性,对外界的干扰具有良好的自适应性.     

Living plant systems: How robust are they in the absence of gravity?

The following hierarchical levels can be recognised in plant systems: cells, organs, organisms and gamodemes (interbreeding members of a community). Each level in this ‘living hierarchy’ is both defined and supported by a similar set of sub-systems. Within this framework of plant organization, two complementary questions are relevant for interpreting plant-oriented space experiments: 1) What role, if any, does gravity play in enabling the development of each organizational level? and 2) Does abnormal development in an altered gravity environment indicate sub-system inefficiency? Although a few representatives of the various organizational levels in plant systems have already been the subject of microgravity experiments in space laboratories—from cells in culture to gamodemes, the latter being found in some Closed Environment Life Support Systems—it would be of interest to investigate additional systems with respect to their response to microgravity. Recognition of the sub-systems at each level might be relevant not only for a more complete understanding of plant development but also for the successful cultivation and propagation of plants during long-term space flights and the establishment of plants in extra-terrestrial environments.