惯性参数不确定的自由漂浮空间机器人自适应控制研究

针对自由漂浮空间机器人系统惯性参数不确定问题,提出一种笛卡儿空间内的自适应轨迹跟踪控制方法。采用扩展机械臂模型建立了自由漂浮空间机器人关节空间动力学方程,进而推导笛卡儿空间中的自由漂浮空间机器人动力学方程。在基于逆动力学法的自由漂浮空间机器人自适应控制器设计中,利用标称控制器离线固定控制参数与补偿控制器在线补偿方法,既可以保证惯量矩阵可逆,又可以使控制参数实时估计。采用Lyapunov方法的稳定性分析表明系统是稳定且渐进收敛的。最后,应用该控制方法对两杆平面自由漂浮空间机器人进行了仿真研究。仿真结果显示自由漂浮空间机器人末端执行器在笛卡儿空间具有良好的轨迹跟踪能力。     

带有空间机械臂的航天器系统惯性参数辨识

针对航天器惯性参数在轨辨识问题,文章以空间机械臂为研究对象,建立了带有空间机械臂的航天器系统动力学模型,并进行了空间机械臂的动力学分析。通过规划一种复杂的空间机械臂的运动轨迹,对机械臂各关节施加合适激励的方法,使空间机械臂做充分可变构型运动。该运动会改变航天器系统的惯性分布,从而引起航天器系统速度变化。然后,通过ADAMS(Automatic Dynamic Analysis of Mechanical Systems,机械系统动力学自动分析)软件建模测量这些速度变化,计算出空间机械臂的惯性变化,进而基于动量和动量距守恒的方法建立线性回归方程。最后,通过应用递推最小二乘法解线性回归方程组,辨识出了航天器的惯性参数。仿真分析结果表明了所辨识的航天器惯性参数的有效性和准确性。     

模型直升机悬停状态下飞行力学模型辨识

 直升机飞行力学模型的准确性对于直升机的控制系统设计具有非常重要的影响。采用常规的建模方法往往很难获得准确的飞行力学模型。为满足飞行控制系统设计的需要,提出了一种直升机飞行力学模型的系统辨识建模方法。该方法将机理建模方法与辨识建模方法相结合,首先利用状态子空间法获得直升机的近似飞行力学模型,再将机理建模提供的先验知识与子空间法辨识得到的模型相融合,限定主要参数,采用误差预报法进一步寻优得到较准确的直升机飞行力学模型。通过飞行试验,成功地辨识得到了悬停状态下模型直升机状态空间方程表达的线化飞行力学模型。所得的辨识结果能够准确预测出模型直升机的响应,可以应用于飞行控制系统设计当中。     

直升机悬停状态全耦合飞行动力学模型辨识方法

提出了一种基于集员辨识理论的直升机全耦合飞行动力学模型参数辨识方法.该方法针对直升机飞行动力学模型耦合强,难以得到辨识模型和待辨识参数之间显式函数关系的特点,推导并建立了状态空间微分方程形式模型集员辨识的间接辨识算法.通过引入广义噪声的概念以及对其边界的灵活设定,实现了对辨识参数众多、耦合严重且灵敏度差异大的复杂模型的...     

二维递归数字滤波器新的时域设计方法

 本之将二维递归数字滤波器的时域设计转化为二维线性移不变差分模型的辨识问题。文中采用一种新的辨识方法,能确定滤波器的阶次和参数矩阵。该方法中运用了实时递推算法,使得初始信息矩阵较小,占用较少的内存空间,故比较实用。文中给出了设计实例。     

一种计及观测噪音的分系统递推辨识方法

本文提出一种可以处理带测量噪音的多输入多输出线性系统递推参数辨识方法。目前多输入多输出系统的在线参数估计方法或者需要将模型正规化,或者要做大量高维矩阵求逆运算,不仅运算时间长,而且很可能由于矩阵逆的不存在而导致估计失败。本文方法将多输入多输出系统参数估计问题分解为若干步多输入单输出系统参数估计问题,把高维矩阵求逆化为若干步求倒数运算,从而避免了可能由此而导致的估计失败。本方法直接估计线性系统参数,不需将模型正规化,从而节省了实际运算时间。最后,根据有观测噪音的试飞数据对本文方法进行之检验。     

一种无人直升机飞行力学模型辨识方法研究

研究了一种无人直升机飞行力学模型辨识方法.将状态子空间辨识法和误差预报辨识法这两种不同机理的辨识方法相结合,用于无人直升机飞行力学模型的辨识.通过仿真计算,成功地辨识得到了悬停状态下算例无人直升机的高阶飞行力学模型.结果表明:提出的辨识方法具备状态子空间辨识法和误差预报辨识法各自的优点,不会出现经典辨识算法中寻优过程中出现的局部极小现象以及迭代带来的收敛性问题.     

一种系统辨识的递阶算法及其在飞机颤振试飞中的应用

在研究协方差矩阵特性的基础上 ,给出一种最小二乘辨识系统的递阶算法。该算法与自回归模型参数辨识的Levinson方法相似 ,利用协方差矩阵的特性,由低阶模型参数递阶算出高一阶的参数,用阶次辨识方法确定模型阶次。避免了最小二乘系统辨识批处理方法中的高阶矩阵求逆及最小二乘系统辨识递推算法中的循环修正,提高了计算的效率。该辨识方法成功地应用于飞机颤振特性的辨识。     

Failure treatment strategy and fault-tolerant path planning of a space manipulator with free-swinging joint failure

Aiming at a space manipulator with free-swinging joint failure, a failure treatment strategy and fault-tolerant path planning method is proposed in this paper. This method can realize failure treatment of a space manipulator with free-swinging joint failure through determination of the optimal locked joint angle and dynamics model reconfiguration. Fault-tolerant path planning is realized by the establishment of the degraded workspace with integrated kinematics performance (DWWIKP) and an improved A-Star (A1) algorithm. This paper has the following contributions. The determination of the optimal locked joint angle can ensure that the manipulator is able to continue follow-up tasks while maximizing the workspace of the manipulator after locking the fault joint. Underactuated control of a high degree-of-freedom (DOF) manipulator can be effectively solved through dynamics model reconfiguration. The analysis process of the dynamics coupling relationship can be applied to cases where the active joint and the passive joint are parallel or perpendicular to each other. The establishment of the DWWIKP can demonstrate the kinematics performance of the manipulator in both joint space and operation space comprehensively. The improved A1 algorithm based on the integrated kinematics performance index (IKPI) can search a fault-tolerant task trajectory that satisfies the requirements of reachability and the overall kinematics performance simultaneously. The method proposed in this paper is verified by a 7-DOF manipulator, and it is available to any DOF manipulator with free-swinging joint failure.     

Recursive 3-D motion estimation from a monocular image sequence

Consideration is given to the design and application of a recursive algorithm to a sequence of images of a moving object to estimate both its structure and kinematics. The object is assumed to be rigid, and its motion is assumed to be smooth in the sense that it can be modeled by retaining an arbitrary number of terms in the appropriate Taylor series expansions. Translational motion involves a standard rectilinear model, while rotational motion is described with quaternions. Neglected terms of the Taylor series are modeled as process noise. A state-space model is constructed, incorporating both kinematic and structural states, and recursive techniques are used to estimate the state vector as a function of time. A set of object match points is assumed to be available. The problem is formulated as a parameter estimation and tracking problem which can use an arbitrarily large number of images in a sequence. The recursive estimation is done using an iterated extended Kalman filter (IEKF), initialized with the output of a batch algorithm run on the first few frames. Approximate Cramer-Rao lower bounds on the error covariance of the batch estimate are used as the initial state estimate error covariance of the IEKF. The performance of the recursive estimator is illustrated using both real and synthetic image sequences     

机械手模型参考自适应控制的仿真及实验研究

 <正> 1。引言 众所周知,多关节机械手是高度耦合的,时变的非线性系统,现在国内外市场上的工业机械手绝大多数仍采用经典控制理论设计控制器,但随着对机械手性能要求的不断提高,经典控制理论已不能满足要求,近十年来,控制专家们开始研究自适应控制来解决复杂的机械手控制系统的设计。文献(1)提出局部参数优化的自适应控制算法,但不能保证整个系统稳定而必须进行十分困难的稳定性分析。文献(2)提出基于摄动方程的自适应控制,将非线性控制问题简化成关于期望轨迹的线性控制问题。但要进行实时辨识,因而实时计算量大,实时性差。笔者尚未见到关于解决机械手传动装置中的固有非线性,如库仑摩擦、间隙等的研究报导。实际上这种固有非线性对系统的性能,如精度、稳定性等有不可忽视的影响。此外上述对机械手自适应控制的研究都是计算机仿真,很少有实验研究的报导。     

结构在环境激励下的模态参数辨识

针对传统模态辨识方法存在的缺陷,研究了工程结构在环境激励下的模态参数的辨识问题。通过各点测试数据的协方差数据构成Hankel矩阵,运用随机子空间实现进行系统矩阵的辨识。经飞机模型的环境激励分析验证,上述方法具有理想的辨识精度,在大型结构的模态辨识领域,拥有广阔的应用前景。     

基于TD-RLS算法的四旋翼飞行器系统参数辨识

在对飞行器气动参数进行辨识的过程中,常需要对获得的数据求微分或二次微分,而利用差分法求微分会放大噪声的影响,引入滤波器抑制噪声又会产生相位延迟.针对这一问题,提出了一种跟踪微分器-递推最小二乘(TD-RLS)辨识算法.首先,建立了悬停条件下四旋翼飞行器的系统模型;然后,基于实验室四旋翼平台飞行试验实测数据,将TD-RLS算法应用于飞行器参数辨识.最终的辨识结果表明,在四旋翼飞行器悬停或者小角度飞行条件下,该方法可以实时获得比较精确的系统模型.     

空间非合作目标惯性参数的Adaline网络辨识方法

空间在轨操作中,航天器在对空间非合作目标的抓捕行动常常导致航天器本体的姿态和空间轨迹发生变化。为克服空间非合作目标对航天器本体动力学、运动学的影响,使控制系统做出精准及时的姿控策略调整,确保航天器正常在轨工作和轨迹姿态的高精度,需对抓捕的非合作目标的惯性参数进行辨识。针对传统辨识方法依赖广义逆求解导致的辨识过程运算量大,且数值容易产生剧烈振荡,造成辨识结果不稳定等不足,采用基于归一化最小均方（NLMS）准则的Adaline神经网络方法进行空间非合作目标惯性参数的辨识。首先,基于动量守恒理论建立抓捕后的航天器-机械臂-空间非合作目标系统模型;然后将辨识方程的系数矩阵作为网络的输入和输出,空间非合作目标的惯性参数作为神经网络的训练权重,基于迭代步长可变的NLMS准则实现对目标惯量参数的快速、准确辨识;最后,在构造的ADAMS/MATLAB联合仿真平台上进行了验证。仿真结果表明,基于NLMS准则的Adaline神经网络是一种快速、准确辨识目标惯量参数的有效方法。     

具有冗余度的三分支空间机器人的运动学分析

基于例如空间站等恶劣的应用环境,研制了一种具有冗余度的三分支空间机器人。该机器人的一个分支的末端可以和基座固联,另外两个分支可以进行控制来完成各种作业。在宇航员不在的情况下,该机器人可以代替宇航员对科学实验载荷进行操作。利用旋量理论对机器人的逆运动学进行了分析,并建立了统一的数学模型给出了其运动学优化、动力学优化以及容错控制的理论基础。基于球腕的封闭解,提出了一个简单的逆运动学模型。最后,通过计算机结果演示验证了所提出逆运动学模型的有效性。     

平面柔性欠驱动机械臂的非线性动力学分析

研究了平面柔性欠驱动机械臂中被动关节对系统动态特性的影响 ,在动力学分析的基础上 ,提出了一种基于内共振原理的柔性欠驱动机械臂振动控制方法。在对系统的稳态周期运动进行分析研究的基础上 ,发现处于自由摆动状态的被动关节的平衡位置随系统结构的振动而发生漂移 ,并且被动关节平衡位置的漂移速度和方向与周期输入的振幅有关。提出利用结构柔性产生的振动实现被动关节位置控制的方法 ,通过平面二连杆柔性欠驱动机械臂进行了仿真计算     

飞行器参数辨识方法与应用研究

研究了非线性连续－离散系统极大似然估计方法的实现及其在飞行器气动参数辨识中的应用问题，首先给出了递推计算灵敏度算法的构成，初始摄动的选择和初值的计算，继而导出了不需矩阵求逆运算的递推算式。最后结合飞行器的气动参数估计来说明算法的具体实现。     

子空间辨识方法的改进

针对现代航空发动机的自适应控制和故障监控领域建立物理意义明确的系统动态模型的需要，基于数字子空间状态空间系统辨识（N4SID）方法，提出并推导了指定状态为量的子空间辨识方法，并在某些双转子涡喷发动机气动热力学模型上进行了仿真实验，说明通过指定状态变量的子空间辨识方法可以得到较好的辨识结果。     

Recursive mode star identification algorithms

Star identification can be accomplished by several different available algorithms that identify the stars observed by a star tracker. However, efficiency and reliability remain key issues and the availability of new active pixel cameras requires new approaches. Two novel algorithms for recursive mode star identification are presented here. The first approach is derived by the spherical polygon search (SP-search) algorithm, it was used to access all the cataloged stars observed by the sensor field-of-view (FOV) and recursively add/remove candidate cataloged stars according to the predicted image motion induced by camera attitude dynamics. Star identification is then accomplished by a star pattern matching technique which identifies the observed stars in the reference catalog. The second method uses star neighborhood information and a catalog neighborhood pointer matrix to access the star catalog. In the recursive star identification process, and under the assumption of "slow" attitude dynamics, only the stars in the neighborhood of previously identified stars are considered for star identification in the succeeding frames. Numerical tests are performed to validate the absolute and relative efficiency of the proposed methods.     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.