机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

Doppler Processor Rejection of Range Ambiguous Clutter

Doppler processors are used in radar to separate target returns from clutter. When the clutter is at a range farther than the unambiguous range of the radar, the ability to reject the clutter is degraded. In this article the degradation is analyzed for an N-pulse batch processor with Dolph weighting, and the results show how degradation varies with design sidelobe level.     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

New Clutter Rejection Waveforms for Long-Range Radar

A frequent compromise in the design of long-range search radars has to be made between the maximum unambiguous detection range and the achievable coherent clutter rejection performance. A new class of waveforms is introduced which offers the designer a previously unavailable flexibility in arriving at radar designs with improved clutter rejection without seriously affecting the maximum unambiguous search range. The key to these new waveforms is the recognition that a class of useful N-pulse, nonrecursive, moving target indicator (MTI) canceler designs exists which only requires the radar to transmit a total of N -1 (nonuniformly spaced) pulses.     

Further results on radar pointing error reduction using discreteextended Kalman filtering

A recently proposed method of reducing target glint errors in radar systems using extended Kalman filtering is further extended with the inclusion of and compensation for clutter effects. A discrete target model and discrete Kalman filter (DKF) are used. Simulation results demonstrating the DKF are presented, and the limits on the effectiveness of the method are investigated. The major advantage of the DKF is that it can be implemented in software in the digital processor of the radar, offering flexibility over continuous time filters. The ability of the filter to reduce clutter effects further demonstrates the usefulness of this technique for radar pointing error reduction     

Radar Partial Coherence Theory: An Introduction

The nature of physical phenomena is such that scattering from portions of an object, a number of objects, or clutter, is not completely unrelated; the underlying environment causes some degree of order in the phenomenon. Radar partial coherence theory describes a structure for the general target, or clutter, and its relationship to radar cross section, waveform coding, and the radar output signal. The clutter ambiguity function is introduced for extended bodies and embraces the (Woodward) ambiguity function for a point target. Due to nonlinear effects caused by partial coherence within the general target, radar signals and targets are formulated in terms of mutual coherence functions. The basic quantities describing the radar output are 1) the radar mutual coherence function (formulated in terms of the radar waveform) and 2) the target mutual coherence function which depends upon target properties, physical environment, and viewing aspect. Random noise (independent point scatterers) and partially coherent portions of reflecting bodies are made accountable in the theory. Partial coherence effects are treated as patches of reflected energy: self-coherent energy patches plus mutually coherent energy among the patches.     

Optimal polarimetric detection of radar target in a slowlyfluctuating environment of clutter

It is shown that in a situation where a radar target is distant enough from the radar and is included in a natural or artificial clutter environment in such a manner that the conventional detection methods fail, it is possible to improve the radar detection performance by using appropriate signal processing on two orthogonal polarization states. A CFAR (constant false alarm rate) polarimetric detection system based on the study of the polarization difference between clutter and target is proposed. Since the polarization state of the clutter echoes fluctuates slowly from cell to cell, an autoregressive model can be applied to the components of the polarization vector to predict the detection thresholds needed to follow the polarization state variation. The detection thresholds are determined to maintain a false alarm probability equal to 10^-6. The presence of a target registers as a significant variation of the estimation error of the polarization vector. Results obtained from measurements of simple and canonical targets with artificial clutter are presented, and these results validate the principle of polarimetric detection     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

基于稀疏重建的MIMO-OTH雷达多模杂波抑制算法

针对由多模传播引起的多普勒扩展杂波(SDC)严重影响天波超视距雷达(OTHR)对慢速船舰目标的检测这一问题,在基于多输入多输出体制的新一代天波超视距(MIMO-OTH)雷达系统下,利用空域信息抑制多模SDC。传统处理方法需要目标角度先验信息,而在实际中,该信息往往很难获得。为此,提出一种新的基于稀疏重建的多模杂波抑制算法。该算法将二维的稀疏角度搜索转变为一维的角度搜索,使运算量大大降低,且估计出的收发角(DOA-DOD)自动配对,同时可获得各个传播路径下信号的时间多普勒信息,达到了理想的MIMO-OTH雷达多模杂波抑制效果。仿真结果证明了所提算法的有效性。     

某雷达模拟器的目标与杂波信号模拟强度研究

建立了雷达模拟器中目标、地物杂波、海杂波、气象杂波的信号强度计算模型,根据相对运动关系解算出各目标与杂波信号的强度,并按时间流程存储在对应的数据表中,从而信号源将产生相应强度的信号注入雷达模拟台,以便后端雷达模拟台能在雷达威力覆盖范围内准确地显示出目标与杂波强度变化。通过仿真软件在雷达训练模拟器中的功能测试,实现了目标与杂波仿真效果,满足了雷达模拟训练的要求。     

Waveform Design for Multistatic Radar Detection

We derive the optimal Neyman-Pearson (NP) detector and its performance, and then present a methodology for the design of the transmit signal for a multistatic radar receiver. The detector assumes a Swerling I extended target model as well as signal-dependent noise, i.e., clutter. It is shown that the NP detection performance does not immediately lead to an obvious signal design criterion so that as an alternative, a divergence criterion is proposed for signal design. A simple method for maximizing the divergence, termed the maximum marginal allocation algorithm, is presented and is guaranteed to find the global maximum. The overall approach is a generalization of previous work that determined the optimal detector and transmit signal for a monostatic radar.     

Optimum Processing of Unequally Spaced Radar Pulse Trains for Clutter Rejection

A train of radar pulses from one resolution cell can be processed coherently to reject echoes from external clutter and detect targets moving radially with respect to the clutter. Optimum methods of signal processing are defined for systems in which the interpulse spacings are multiply staggered to avoid target blind speeds. Likelihood ratio tests are developed for systems in which the target Doppler frequency is known a priori and for systems employing a bank of filters to cover the target Doppler band. To implement such tests, the N pulses in the train are added with complex weights and the amplitude of the sum compared with a detection threshold. The set of weights which maximizes the average signal-to-clutter ratio is also computed for a single-filter system with unknown target Doppler frequency. When the clutter autocorrelation function is exponential, the clutter covariance matrix can be inverted analytically. This latter result is useful for comparing different interpulse-spacing codes for a particular system application.     

基于嵌入式仿真的雷达训练系统设计

介绍了嵌入式仿真技术及其发展,将嵌入式仿真与雷达模拟训练相结合,构成了能够嵌入到机械扫描雷达实装的模拟训练系统。描述了对嵌入式仿真训练系统的结构组成以及部分模块的功能,研究了模拟雷达视频回波数据的方法和模型,包括目标回波、地物杂波、海杂波、气象杂波、有源干扰和接收机内部噪声,利用数学模型计算回波的强度、方位、距离等特性,调制实际录取的回波数据,生成与态势设置参数相应的模拟回波数据,能够对信号处理操作和抗干扰操作做出响应。通过对视频回波进行仿真,由终端显示画面可知模拟的回波数据具有较高的逼真度,经测试模拟视频回波能够被雷达显控终端识别。     

基于OTHR与纯角度传感器群数据关联的模式辨识与定位精度提升

 天波超视距雷达(OTHR)目标跟踪面临着"三低"(低检测概率、低数据率和低测量精度)和"多径"(多条传播路径)的挑战,因此传播模式的准确辨识与目标定位精度提升是改善跟踪能力的关键。首先利用纯角度传感器群获得目标地理位置的初步估计,然后采用极大似然估计建立了OTHR的传播模式和杂波模式的辨识规则,进而利用最小方差估计准则实现OTHR和纯角度传感器群的量测融合。仿真结果表明,此算法的模式辨识正确率很高,能明显提升方位角的测量精度,但是不能明显提升径向距的精度。     

A novel target detection approach based on adaptive radar waveform design

To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio (SCR) in application of target detection on sea for space-based radar (SBR), a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.     

Adaptive Radar Detection in Doubly Nonstationary Autoregressive Doppler Spread Clutter

The problem of adaptive radar detection in clutter which is nonstationary both in slow and fast time is addressed. Nonstationarity within a coherent processing interval (CPI) often precludes target detection because of the masking induced by Doppler spreading of the clutter. Across range bins (i.e., fast time), nonstationarity severely limits the amount of training data available to estimate the noise covariance matrix required for adaptive detection. Such difficult clutter conditions are not uncommon in complex multipath propagation conditions where path lengths can change abruptly in dynamic scenarios. To mitigate nonstationary Doppler spread clutter, an approximation to the generalized likelihood ratio test (GLRT) detector is presented wherein the CPI from the hypothesized target range is used for both clutter estimation and target detection. To overcome the lack of training data, a modified time-varying autoregressive (TVAR) model is assumed for the clutter return. In particular, maximum likelihood (ML) estimates of the TVAR parameters, computed from a single snapshot of data, are used in a GLRT for detecting stationary targets in possibly abruptly nonstationary clutter. The GLRT is compared with three alternative methods including a conceptually simpler ad hoc approach based on extrapolation of quasi-stationary data segments. Detection performance is assessed using simulated targets in both synthetically-generated and real radar clutter. Results suggest the proposed GLRT with TVAR clutter modeling can provide between 5–8 dB improvement in signal-to-clutter plus noise ratio (SCNR) when compared with the conventional methods.